Pre, intra and post-ischemic hypothermic neuroprotection in temporary focal cerebral ischemia in rats: morphometric analysis

Objective: To evaluate the neuroprotection of mild hypothermia, applied in different moments, in temporary focal cerebral ischemia in rats. Methods: Rats was divided into Control (C), Sham (S), Ischemic-control(IC), Pre-ischemic Hypothermia (IH1), Intra-ischemic Hypothermia (IH2), and Post-ischemic Hypothermia (IH3) groups. Morphometry was performed using the KS400 software (Carl Zeiss (R)) in coronal sections stained by Luxol Fast Blue. Ischemic areas and volumes were obtained. Results: Statistically, blue areas showed difference for C vs. IC, IC vs. IH1 and IC vs. IH2 (p=0.0001; p=0.01; p=0.03), and no difference between C vs. S, IC vs. IH3 and IH vs. IH2 (p=0.39; p=0.85; p=0.63). Red areas showed difference between C vs. IC, IC vs. IH1 and IC vs. IH2 (p=0.0001; p=0.009; p=0.03), and no difference between C vs. S, IC vs. IH3 and IH1 vs. IH2 (p=0.48; p=0.27; p=0.68). Average ischemic areas and ischemic volumes showed difference between IC vs. IH1 and IC vs. IH2 (p=0.0001 and p=0.0011), and no difference between IC vs. IH3 and IH1 vs. IH2 (p=0.57; p=0.79). Conclusion: Pre-ischemic and intra-ischemic hypothermia were shown to be similarly neuroprotective, but this was not true for post-ischemic hypothermia.

Evaluation of the flexural strength and elastic modulus of resins used for temporary restorations reinforced with particulate glass fibre

Objective: The flexural strength and the elastic modulus of acrylic resins, Dencor, Duralay and Trim Plus II, were evaluated with and without the addition of silanised glass fibre. Materials and methods: To evaluate the flexural strength and elastic modulus, 60 test specimens were fabricated with the addition of 10% ground silanised glass fibres for the experimental group, and 60 without the incorporation of fibres, for the control group, with 20 test specimens being made of each commercial brand of resin (Dencor, Duralay and Trim Plus II) for the control group and experimental group. After the test specimens had been completed, the flexural strength and elastic modulus tests were performed in a universal testing device, using the three-point bending test. For the specimens without fibres the One-Way Analysis of Variance and the complementary Tukey test were used, and for those with fibres it was not normal, so that the non-parametric Mann-Whitney test was applied. Results: For the flexural strength test, there was no statistical difference (p > 0.05) between each commercial brand of resin without fibres [Duralay 84.32(+/- 8.54), Trim plus 85.39(+/- 6.74), Dencor 96.70(+/- 6.52)] and with fibres (Duralay 87.18, Trim plus 88.33, Dencor 98.10). However, for the elastic modulus, there was statistical difference (p > 0.01) between each commercial brand of resin without fibres [Duralay 2380.64 (+/- 168.60), Trim plus 2740.37(+/- 311.74), Dencor 2595.42(+/- 261.22)] and with fibres (Duralay 3750.42, Trim plus 3188.80, Dencor 3400.75). Conclusion: The result showed that the incorporation of fibre did not interfere in the flexural strength values, but it increased the values for the elastic modulus.

Costs and benefits of temporary brood desertion in a Neotropical harvestman (Arachnida: Opiliones)

Brood desertion is a life history strategy that allows parents to minimize costs related to parental care and increase their future fecundity. The harvestman Neosadocus maximus is an interesting model organism to study costs and benefits of temporary brood desertion because females abandon their clutches periodically and keep adding eggs to their clutches for some weeks. In this study, we tested if temporary brood desertion (a) imposes a cost to caring females by increasing the risk of egg predation and (b) offers a benefit to caring females by increasing fecundity as a result of increased foraging opportunities. With intensive field observations followed by a model selection approach, we showed that the proportion of consumed eggs was very low during the day and it was not influenced by the frequency of brood desertion. The proportion of consumed eggs was higher at night and it was negatively related to the frequency of brood desertion. However, frequent brood desertion did not result in higher fecundity, measured both as the number of eggs added to the current clutch and the probability of laying a second clutch over the course of the reproductive season. Considering that harvestmen are sensitive to dehydration, brood desertion during the day may attenuate the physiological stress of remaining exposed on the vegetation. Moreover, since brood desertion is higher during the day, when egg predation pressure is lower, caring females could be adjusting their maternal effort to the temporal variation in predation risk, which is regarded as the main cost of brood desertion in ectotherms.

Clinical Performance of Porcelain Laminate Veneers: Outcomes of the Aesthetic Pre-evaluative Temporary (APT) Technique

This article evaluates the long-term clinical performance of porcelain laminate veneers bonded to teeth prepared with the use of an additive mock-up and aesthetic pre-evaluative temporary (APT) technique over a 12-year period. Sixty-six patients were restored with 580 porcelain laminate veneers. The technique, used for diagnosis, esthetic design, tooth preparation, and provisional restoration fabrication, was based on the APT protocol. The influence of several factors on the durability of veneers was analyzed according to pre- and postoperative parameters. With utilization of the APT restoration, over 80% of tooth preparations were confined to the dental enamel. Over 12 years, 42 laminate veneers failed, but when the preparations were limited to the enamel, the failure rate resulting from debonding and microleakage decreased to 0%. Porcelain laminate veneers presented a successful clinical performance in terms of marginal adaptation, discoloration, gingival recession, secondary caries, postoperative sensitivity, and satisfaction with restoration shade at the end of 12 years. The APT technique facilitated diagnosis, communication, and preparation, providing predictability for the restorative treatment. Limiting the preparation depth to the enamel surface significantly increases the performance of porcelain laminate veneers. (Int J Periodontics Restorative Dent 2012;32:625-635.)

Parathyroid adenoma apoplexy as a temporary solution of primary hyperparathyroidism: a case report

Abstract Introduction The natural history of patients with spontaneous parathyroid necrosis is unknown. In this case report we describe the clinical course, laboratory, radiographic, bone densitometry tests, parathyroid ultrasonography and scintigraphy examinations of a patient performed over a period of eight years after she first presented with a sudden episode of spontaneous resolution of primary hyperparathyroidism (PHPT). Case presentation A 24-year-old woman with a clinical history and laboratory and radiographic tests compatible with PHPT suffered a sudden episode of cervical pain and presented with clinical evidence of hypocalcemia. Biopsy of a cervical nodule revealed necrotic material compatible with ischemia of the parathyroid. The follow-up of the patient presented four distinct phases: the first, which lasted two years, was compatible with a period of bone hunger during which it was necessary to introduce calcitriol and calcium carbonate. During this period, the patient showed bone mass gain. The second phase was characterized by normalization of calcium and parathyroid hormone levels and its end was difficult to define. During the third phase there was a recurrence of hypercalcemia associated with elevated parathyroid hormone (PTH) levels and loss of bone mass. The last phase corresponded to the interval after parathyroidectomy, which was characterized by normalization of serum levels of calcium and PTH, as well as bone mass gain. Conclusion This case report indicates that spontaneous resolution of PHPT by adenoma necrosis is potentially temporary. Thus, in cases in which a conservative approach is chosen, clinical and laboratory follow-up is indispensable. Bone mass measurement is a useful tool in the follow-up of these cases. However, this option exposes the patient to a potential roller-coaster ride of bone mass gain and loss, whose long term consequences are still unknown.

Employment of a noninvasive magnetic method for evaluation of gastrointestinal transit in rats

AC Biosusceptometry (ACB) was previously employed towards recording gastrointestinal motility. Our data show a reliable and successful evaluation of gastrointestinal transit of liquid and solid meals in rats, considering the methods scarcity and number of experiments needed to endorsement of drugs and medicinal plants. ACB permits real time and simultaneous experiments using the same animal, preserving the physiological conditions employing both meals with simplicity and accuracy.

Temporary effect of chiseling on the compaction of a Rhodic Hapludox under no-tillage

Mechanical chiseling has been used to alleviate the effects of compaction in soils under no-tillage (NT). However, its effect on the soil physical properties does not seem to have a defined duration period. The purpose of this study was to evaluate the behavior of the bulk density (BD) and degree of compaction (DC) at different soil depths, after chiseling in no-tillage, for one year. The experiment was performed in Ponta Grossa, Paraná State, Brazil, using an Oxisol (Rhodic Hapludox). Bulk density and DC were previously measured in an area under NT for 16 years, then immediately after chiseling (CHI) in May 2009, six months after chiseling (CHI6M) in October 2009 and one year after chiseling (CHI12M) in May 2010. In the layers 0.0-0.10, 0.10-0.20 and 0.20-0.30 m, there was a significant BD reduction CHI and a marked increase CHI6M. The BD values measured CHI12M were similar to those before tillage. Chiseling reduced the DC in the layers 0.0-0.10 m and 0.10-0.20 m, but returned to the initial values one year later. During the evaluation periods CHI, CHI6M and CHI12M, the BD increased in the layer 0.30-0.40 m, compared with NT. The highest DC values were observed six months after chiseling; nevertheless the structural recovery of the soil was considerable, possibly due to the high degree of soil resilience and the influence of the wetting and drying cycles detected in the study period. The chiseling effects, evaluated by BD and DC, lasted less than one year, i.e., the beneficial short-term effects of chiseling on the reduction of the surface BD increased the risk of compaction in deeper soil layers.

Dynamics of follicular growth and progesterone concentrations in cyclic and anestrous suckling Nelore cows (Bos indicus) treated with progesterone, equine chorionic gonadotropin, or temporary calf removal

The objective of this study was to investigate the effects of eCG and temporary calf removal (TCR) associated with progesterone (P4) treatment on the dynamics of follicular growth, CL size, and P4 concentrations in cyclic (n ¼ 36) and anestrous (n ¼ 30) Nelore cows. Cyclic (C) and anestrous (A) cows were divided into three groups. The control group received 2 mg of estradiol benzoate via intramuscular (IM) injection and an intravaginal device containing 1.9 g of P4 on Day 0. On Day 8, the device was removed, and the animals received 12.5 mg of dinoprost tromethamine IM. After 24 hours, the animals received 1 mg of estradiol benzoate IM. In the eCG group, cows received the same treatment described for the control group but also received 400 UI of eCG at the time of device removal. In the TCR group, calves were separated from the cows for 56 hours after device removal. Ultrasound exams were performed every 24 hours after device removal until the time of ovulation and 12 days after ovulation to measure the size of the CL. On the same day as the CL measurement, blood was collected to determine the plasma P4 level. Statistical analyses were performed with a significance level of P ≤ 0.05. In cyclic cows, the presence of the CL at the beginning of protocol resulted in a smaller follicle diameter at the time of device removal (7.4 ± 0.3 mm in cows with CL vs. 8.9 ± 0.4 mm in cows without CL; P ¼ 0.03). All cows ovulated within 72 hours after device removal. Anestrous cows treated with eCG or TCR showed follicle diameter at fixed-timed artificial insemination (A-eCG 10.2 ± 0.3 and A-TCR 10.3 ± 0.5 mm) and follicular growth rate (A-eCG 1.5 ± 0.2 and A-TCR 1.3 ± 0.1 mm/day) similar to cyclic cows (C-eCG 11.0 ± 0.6 and C-TCR 12.0 ± 0.5 mm) and (C-eCG 1.4 ± 0.2 and C-TCR 1.6 ± 0.2 mm/day, respectively; P ≤ 0.05). Despite the similarities in CL size, the average P4 concentration was higher in the A-TCR (9.6 ± 1.4 ng/mL) than in the A-control (4.0 ± 1.0 ng/mL) and C-TCR (4.4 ± 1.0 ng/mL) groups (P < 0.05). From these results, we conclude that eCG treatment and TCR improved the fertility of anestrous cows by providing follicular growth rates and size of dominant follicles similar to cyclic cows. Additionally, TCR increases the plasma concentrations of P4 in anestrous cows

The Enhanced Single-dish Control System and wide surveys of compact sources

The Italian radio telescopes currently undergo a major upgrade period in response to the growing demand for deep radio observations, such as surveys on large sky areas or observations of vast samples of compact radio sources. The optimised employment of the Italian antennas, at first constructed mainly for VLBI activities and provided with a control system (FS – Field System) not tailored to single-dish observations, required important modifications in particular of the guiding software and data acquisition system. The production of a completely new control system called ESCS (Enhanced Single-dish Control System) for the Medicina dish started in 2007, in synergy with the software development for the forthcoming Sardinia Radio Telescope (SRT). The aim is to produce a system optimised for single-dish observations in continuum, spectrometry and polarimetry. ESCS is also planned to be installed at the Noto site. A substantial part of this thesis work consisted in designing and developing subsystems within ESCS, in order to provide this software with tools to carry out large maps, spanning from the implementation of On-The-Fly fast scans (following both conventional and innovative observing strategies) to the production of single-dish standard output files and the realisation of tools for the quick-look of the acquired data. The test period coincided with the commissioning phase for two devices temporarily installed – while waiting for the SRT to be completed – on the Medicina antenna: a 18-26 GHz 7-feed receiver and the 14-channel analogue backend developed for its use. It is worth stressing that it is the only K-band multi-feed receiver at present available worldwide. The commissioning of the overall hardware/software system constituted a considerable section of the thesis work. Tests were led in order to verify the system stability and its capabilities, down to sensitivity levels which had never been reached in Medicina using the previous observing techniques and hardware devices. The aim was also to assess the scientific potential of the multi-feed receiver for the production of wide maps, exploiting its temporary availability on a mid-sized antenna. Dishes like the 32-m antennas at Medicina and Noto, in fact, offer the best conditions for large-area surveys, especially at high frequencies, as they provide a suited compromise between sufficiently large beam sizes to cover quickly large areas of the sky (typical of small-sized telescopes) and sensitivity (typical of large-sized telescopes). The KNoWS (K-band Northern Wide Survey) project is aimed at the realisation of a full-northern-sky survey at 21 GHz; its pilot observations, performed using the new ESCS tools and a peculiar observing strategy, constituted an ideal test-bed for ESCS itself and for the multi-feed/backend system. The KNoWS group, which I am part of, supported the commissioning activities also providing map-making and source-extraction tools, in order to complete the necessary data reduction pipeline and assess the general system scientific capabilities. The K-band observations, which were carried out in several sessions along the December 2008-March 2010 period, were accompanied by the realisation of a 5 GHz test survey during the summertime, which is not suitable for high-frequency observations. This activity was conceived in order to check the new analogue backend separately from the multi-feed receiver, and to simultaneously produce original scientific data (the 6-cm Medicina Survey, 6MS, a polar cap survey to complete PMN-GB6 and provide an all-sky coverage at 5 GHz).

Il contratto a Tempo Determinato nel lavoro privato e pubblico. Assetti e linee di tendenza in un mercato del lavoro dinamico e globale

L’elaborato, dopo una ricostruzione della disciplina normativa presente in materia di contratto a tempo determinato in Italia e nei principali ordinamenti europei (Spagna, Francia ed Inghilterra), affronta i più rilevanti nodi problematici dell’istituto, in riferimento al settore privato e pubblico, mettendo in luce le principali querelle dottrinali e giurisprudenziali. Particolare attenzione è dedicata alle questioni insorte a seguito delle ultime modifiche normative di cui al c.d. Collegato lavoro (legge n. 183/2010), sino al decisivo intervento della Corte Costituzionale, con pronuncia n. 303 del 9 novembre 2011, che ha dichiarato legittima la disposizione introduttiva dell’indennità risarcitoria forfetizzata, aggiuntiva rispetto alla conversione del contratto. Tutte le problematiche trattate hanno evidenziato le difficoltà per le Corti Superiori, così come per i giudici comunitari e nazionali, di trovare una linea univoca e condivisa nella risoluzione delle controversie presenti in materia. L’elaborato si chiude con alcune riflessioni sui temi della flessibilità e precarietà nel mondo del lavoro, attraverso una valutazione quantitativa e qualitativa dell’istituto, nell’intento di fornire una risposta ad alcuni interrogativi: la flessibilità è necessariamente precarietà o può essere letta quale forma speciale di occupazione? Quali sono i possibili antidoti alla precarietà? In conclusione, è emerso come la flessibilità possa rappresentare un problema per le imprese e per i lavoratori soltanto nel lungo periodo. La soluzione è stata individuata nell’opportunità di investire sulla formazione. Si è così ipotizzata una nuova «flessibilità socialmente ed economicamente sostenibile», da realizzarsi tramite l’ausilio delle Regioni e, quindi, dei contributi del Fondo europeo di sviluppo regionale: al lavoratore, in tal modo, potrà essere garantita la continuità con il lavoro tramite percorsi formativi mirati e, d’altro canto, il datore di lavoro non dovrà farsi carico dei costi per la formazione dei dipendenti a tempo determinato.

Aspetti progettuali di un temporary refuge

Calcolo del numero di bombole di aria necessario a garantire la sopravvivenza di 40 persone all'interno di un cabinato e determinazione della temperatura finale raggiunta

Flessibilità e controllo sindacale nel mercato del lavoro contemporaneo: il caso del contratto a tempo determinato

Il lavoro di ricerca che si presenta è suddiviso in tre capitoli nei quali, da altrettanti punti di osservazione, è analizzato il tema della instabilità del lavoro. Nel primo capitolo, il candidato evidenzia le cause che hanno determinato il vorticoso aumento di utilizzo dei contratti di lavoro flessibili e, a tal proposito, da un prospettiva extra-nazionale, analizza le direttive europee e, i principi comuni e le guidelines che, nel percorso di sviluppo della strategia europea per l’occupazione, hanno posto la flexicurity come modello di mercato europeo tipico; dalla medesima prospettiva, prendendo spunto dai cambiamenti del mercato globale, si pone attenzione all’analisi economica del diritto del lavoro e, in particolare, alle conseguenze che le trasformazioni economiche generano sulla capacità di questa materia di tenere elevato il grado di sicurezza occupazionale connesso alla stipula dei contratti di lavoro. Il secondo capitolo è dedicato al ruolo svolto in Italia dai sindacati sul tema della flessibilità. In tal senso, l’autore evidenzia come la funzione “istituzionale” cui sono chiamate anche le organizzazioni dei lavoratori abbia caratterizzato le scelte di politica sindacale in materia di lavori temporanei; è così preso in esame il concetto di flessibilità “contrattata”, come già emerso in dottrina, e si teorizza la differenza tra rinvii “aperti” e rinvii “chiusi”, quali differenti forme di delega di potere normativo alle parti sociali in materia di flessibilità. Nel terzo ed ultimo capitolo l’autore tenta di evidenziare i vantaggi e le funzioni che derivano dall’utilizzo del contratto a termine, quale principale forma di impiego flessibile del nostro mercato del lavoro. Premessi tali benefici viene formulato un giudizio critico rispetto al grado di liberalizzazione che, con le ultime riforme, è stato ammesso per questo istituto sempre più strumento di arbitrio del datore di lavoro nella scelta della durata e delle condizioni di svolgimento della prestazione di lavoro.

Essays in Health Economics

In the first chapter we develop a theoretical model investigating food consumption and body weight with a novel assumption regarding human caloric expenditure (i.e. metabolism), in order to investigate why individuals can be rationally trapped in an excessive weight equilibrium and why they struggle to lose weight even when offered incentives for weight-loss. This assumption allows the theoretical model to have multiple equilibria and to provide an explanation for why losing weight is so difficult even in the presence of incentives, without relying on rational addiction, time-inconsistency preferences or bounded rationality. In addition to this result we are able to characterize under which circumstances a temporary incentive can create a persistent weight loss. In the second chapter we investigate the possible contributions that social norms and peer effects had on the spread of obesity. In recent literature peer effects and social norms have been characterized as important pathways for the biological and behavioral spread of body weight, along with decreased food prices and physical activity. We add to this literature by proposing a novel concept of social norm related to what we define as social distortion in weight perception. The theoretical model shows that, in equilibrium, the effect of an increase in peers' weight on i's weight is unrelated to health concerns while it is mainly associated with social concerns. Using regional data from England we prove that such social component is significant in influencing individual weight. In the last chapter we investigate the relationship between body weight and employment probability. Using a semi-parametric regression we show that men and women employment probability do not follow a linear relationship with body mass index (BMI) but rather an inverted U-shaped one, peaking at a BMI way over the clinical threshold for overweight.