842 resultados para smaltimento reflui on-site sanitation madagascar


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The issue of environmental impacts to human health and the generation and disposal of solid waste has led to a change of paradigms for your face, highlighting the need for sustainable management of municipal solid waste (MSW). In this context, the expansion of landfills in Brazil in recent decades makes it necessary to sustainable management of waste generated by this type of enterprise, since its implementation. The aim of this study was to perform a diagnosis of the generation of waste in a landfill, in the expansion phase, and the alternatives adopted for its management. The qualitative diagnosis was made from observations on site and the wastes were classified and quantified from August 2011 to January 2012. In the diagnosis was considered the reduction, reuse and recycle, in that order. The results of this study showed that the residue of the greatest generation was PEAD geomembranes used in the waterproofing of the landfill, reaching 7 t, followed by PVC pipes, which reached 850 kg, both destined for recycling. The largest volume of wastewater generated corresponded to the leachate, reaching 11,500 m3 , which were sent for treatment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study aims to analyze the thermal comfort in urban areas for different land uses. The ENVImet microclimatic model has been used for urban boundary layer simulation, providing the following thermal comfort indexes: PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfaction). The chosen area covers the central area in the city of Ourinhos, located in southeastern Brazilian city, with subtropical climate. Four simulations were accomplished: an area with real buildings and vegetation on site, a “grassy” area where buildings have been replaced by grass in the central area, another grassy area, known as “grass/tree”, with additional trees in, and a final area called “Park” also grassy, where trees were added all over the area. The structures which showed thermal comfort within the ISO 7730 standards were the grassy area with no trees at 9 a.m., and a paved area, as well as the park area at 3 p.m. Other situations have presented values of PMV and PPD off the limits required by the rules; they were very close to those values. The only point that presented a far cry from the comfort required was the spot in the asphalt at 9 a.m. The other situations showed PMV and PPD values not far from the limits of comfort. Only the point on the asphalt showed values far from the limit of comfort at 9 a.m.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The study presents the application of an ergonomic method based on graphical mesh, created to analyze the attributes of public open space and that influence on their usability. It was based on DePAN method, created to classify the service level offered by niches present in open relationship spaces. However, this method adopted Geographical Information System (GIS ) to make maps that represent the space attributes. This study proposed an adaptation of this method, which replaces GIS by AutoCAD software to generate maps . The goal is to test the feasibility and efficiency of producing maps in AutoCAD software to represent the service niches level. An relashionship area on a college campus for data collecting in graphical meshes and maps confection. By applying the graphical mesh the attributes of that space were evaluated to help promote people permanence on site. Although the process through AutoCAD seems to be harder by being mechanical it guarantees a satisfactory result for analysis, resembling images generated by GIS. Therefore, it is concluded that it’s possible to represent graphically the riches service level.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The massive urbanization and activities arising from the uncontrolled growth of urban areas, result in changes on the climate, making it unhealthy. One factor that contributes to poor quality of life due to this fact is the islands of heat that consists in the accumulation of surface heat and raises the temperature in the cities. The vegetation consists of urban greening, urban forests and green areas, have the function to minimize this effect. To reconcile these factors, collected data on surface temperature by satellite images, LANDSAT 5 captured on 18/12/2012 point 75 e 76, orbits 221, band 6 and on-site survey with thermo-hygrometer, possessed the data, crossing the conducted vegetative survey and provided a management vision to improve the microclimate of the city under study. The vegetation coverage at urban area directly affects the ambient temperature, improving the urban micro-climate. The different analyzed surface coverage also affects the apparent temperature. Among the studied ranks, the eucalyptus cultivation, native forest, urban area and solo exposed areas with greater vegetation cover have mild temperatures and improved microclimate.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Green Supply Chain Management (GSCM) is gaining prominence in the academy and business, as an approach that aims to promote economic and environmental gains. The GSCM is operated through the Environmental Management System Tools and treated as an Environmental Management System (EMS), involving Reverse Logistics, Green Purchasing, Green Sourcing, Green Design, Green Packaging, Green Operation, Green Manufacturing, Green Innovation and Customer Awareness. The objective of this study is to map the GSCM tools and identify their practice in a consumer goods industry in the Vale do Paraiba. The approach and data collection were made in the company's database chosen as the object of study, as well as through on site visits and interviews. The results showed that the tools Green Operation, Green Manufacturing, Green Innovation and Green Sourcing are applied in the company and just Costumer Awareness tool showed no practice at all. To other tools was identified ideology or interest of the company in applying them

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Green Supply Chain Management (GSCM) is gaining prominence in the academy and business, as an approach that aims to promote economic and environmental gains. The GSCM is operated through the Environmental Management System Tools and treated as an Environmental Management System (EMS), involving Reverse Logistics, Green Purchasing, Green Sourcing, Green Design, Green Packaging, Green Operation, Green Manufacturing, Green Innovation and Customer Awareness. The objective of this study is to map the GSCM tools and identify their practice in a consumer goods industry in the Vale do Paraiba. The approach and data collection were made in the company's database chosen as the object of study, as well as through on site visits and interviews. The results showed that the tools Green Operation, Green Manufacturing, Green Innovation and Green Sourcing are applied in the company and just Costumer Awareness tool showed no practice at all. To other tools was identified ideology or interest of the company in applying them

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: Malaria caused by Plasmodium vivax is an experimentally neglected severe disease with a substantial burden on human health. Because of technical limitations, little is known about the biology of this important human pathogen. Whole genome analysis methods on patient-derived material are thus likely to have a substantial impact on our understanding of P. vivax pathogenesis and epidemiology. For example, it will allow study of the evolution and population biology of the parasite, allow parasite transmission patterns to be characterized, and may facilitate the identification of new drug resistance genes. Because parasitemias are typically low and the parasite cannot be readily cultured, on-site leukocyte depletion of blood samples is typically needed to remove human DNA that may be 1000X more abundant than parasite DNA. These features have precluded the analysis of archived blood samples and require the presence of laboratories in close proximity to the collection of field samples for optimal pre-cryopreservation sample preparation. Results: Here we show that in-solution hybridization capture can be used to extract P. vivax DNA from human contaminating DNA in the laboratory without the need for on-site leukocyte filtration. Using a whole genome capture method, we were able to enrich P. vivax DNA from bulk genomic DNA from less than 0.5% to a median of 55% (range 20%-80%). This level of enrichment allows for efficient analysis of the samples by whole genome sequencing and does not introduce any gross biases into the data. With this method, we obtained greater than 5X coverage across 93% of the P. vivax genome for four P. vivax strains from Iquitos, Peru, which is similar to our results using leukocyte filtration (greater than 5X coverage across 96% of the genome). Conclusion: The whole genome capture technique will enable more efficient whole genome analysis of P. vivax from a larger geographic region and from valuable archived sample collections.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Atmospheric conditions at the site of a cosmic ray observatory must be known for reconstructing observed extensive air showers. The Global Data Assimilation System (GDAS) is a global atmospheric model predicated on meteorological measurements and numerical weather predictions. GDAS provides altitude-dependent profiles of the main state variables of the atmosphere like temperature, pressure, and humidity. The original data and their application to the air shower reconstruction of the Pierre Auger Observatory are described. By comparisons with radiosonde and weather station measurements obtained on-site in Malargue and averaged monthly models, the utility of the GDAS data is shown. (C) 2012 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O princípio da controlabilidade prevê que os gestores deveriam ser avaliados com base em fatores controláveis. Consequentemente, os incentivos gerenciais estariam relacionados a práticas de contabilidade gerencial capazes de evitar que os gestores sejam responsabilizados por resultados financeiros além do controle gerencial, tais como análise por centro de responsabilidade, custo padrão, preço de transferência, orçamento e avaliação de desempenho. Este artigo desenvolve um estudo de campo para investigar se há relação entre a presença de incentivos gerenciais e as práticas de contabilidade gerencial associadas ao princípio da controlabilidade. Entrevistas in loco foram realizadas para a coleta de dados em nível organizacional e testes estatísticos não paramétricos foram utilizados para a análise dos dados. Entre as práticas de contabilidade gerencial examinadas, os resultados sugerem que apenas orçamento anual, análise por centro de responsabilidade e avaliação de desempenho estão associados à presença de sistemas de incentivos nas empresas entrevistadas.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In 2008, academic researchers and public service officials created a university extension studies platform based on online and on-site meetings denominated "Work-Related Accidents Forum: Analysis, Prevention, and Other Relevant Aspects. Its aim was to help public agents and social partners to propagate a systemic approach that would be helpful in the surveillance and prevention of work-related accidents. This article describes and analyses such a platform. Online access is free and structured to: support dissemination of updated concepts; support on-site meetings and capacity to build educational activities; and keep a permanent space for debate among the registered participants. The desired result is the propagation of a social-technical-systemic view of work-related accidents that replaces the current traditional view that emphasizes human error and results in blaming the victims. The Forum uses an educational approach known as permanent health education, which is based on the experience and needs of workers and encourages debate among participants. The forum adopts a problematizing pedagogy that starts from the requirements and experiences of the social actors and stimulates support and discussions among them in line with an ongoing health educational approach. The current challenge is to turn the platform into a social networking website in order to broaden its links with society.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We performed a first principles investigation on the electronic properties of 4f-rare earth substitutional impurities in zincblende gallium nitride (GaN:REGa, with RE=Eu, Gd, Tb, Dy, Ho, Er and Tm). The calculations were performed within the all electron methodology and the density functional theory. We investigated how the introduction of the on-site Hubbard U potential (GGA + U) corrects the electronic properties of those impurities. We showed that a self-consistent procedure to compute the Hubbard potential provides a reliable description on the position of the 4f-related energy levels with respect of the GaN valence band top. The results were compared to available data coming from a recent phenomenological model. (C) 2012 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Estratégias passivas de projeto reduzem significativamente o uso de ar condicionado e melhoram o conforto térmico dos usuários. Isto pode ser ilustrado através dos hospitais da Rede Sarah Kubitschek projetados pelo arquiteto João Filgueiras Lima, Lelé, cujas soluções além de propiciarem ambientes mais agradáveis e salubres, evitam o uso de sistemas mecânicos de resfriamento, reduzindo o consumo de energia elétrica. Deste modo, o presente artigo tem como objetivo avaliar o conforto térmico dos hospitais Sarah de Salvador e do Rio de Janeiro, através de medições in loco da temperatura do ar, umidade relativa do ar e velocidade do ar. A análise dos resultados foi baseada em leituras de projeto, na norma ASHRAE Standard 55/2004 e em parâmetros adquiridos na literatura especializada. Os resultados demonstram a preocupação de Lelé na incorporação de aspectos bioclimáticos nos projetos. No Sarah - Salvador, alguns ambientes permaneceram fora da zona de conforto no período do meio dia, devido ao ganho de calor pela cobertura. No entanto, o uso da ventilação natural auxilia no efeito de resfriamento, melhorando o conforto térmico nos espaços internos. Já no Sarah - Rio, todos os ambientes permanecem dentro da zona de conforto proposta pela ASHRAE 55.