A semi-automated, field-portable microscopy platform for clinical diagnostic applications

Clinical microscopy is a versatile diagnostic platform used for diagnosis of a multitude of diseases. In the recent past, many microfluidics based point-of-care diagnostic devices have been developed, which serve as alternatives to microscopy. However, these point-of-care devices are not as multi-functional and versatile as clinical microscopy. With the use of custom designed optics and microfluidics, we have developed a versatile microscopy-based cellular diagnostic platform, which can be used at the point of care. The microscopy platform presented here is capable of detecting infections of very low parasitemia level (in a very small quantity of sample), without the use of any additional computational hardware. Such a cost-effective and portable diagnostic device, would greatly impact the quality of health care available to people living in rural locations of the world. Apart from clinical diagnostics, it's applicability to field research in environmental microbiology has also been outlined. (C) 2015 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.

Coupling geomorphology parameters with lithology for micro-level groundwater resource assessment: a case study from semi-arid hard rock terrain in Tamil Nadu, India

The standard procedure of groundwater resource estimation in India till date is based on the specific yield parameters of each rock type (lithology) derived through pumping test analysis. Using the change in groundwater level, specific yield, and area of influence, groundwater storage change could be estimated. However, terrain conditions in the form of geomorphological variations have an important bearing on the net groundwater recharge. In this study, an attempt was made to use both lithology and geomorphology as input variables to estimate the recharge from different sources in each lithology unit influenced by the geomorphic conditions (lith-geom), season wise separately. The study provided a methodological approach for an evaluation of groundwater in a semi-arid hard rock terrain in Tirunelveli, Tamil Nadu, India. While characterizing the gneissic rock, it was found that the geomorphologic variations in the gneissic rock due to weathering and deposition behaved differently with respect to aquifer recharge. The three different geomorphic units identified in gneissic rock (pediplain shallow weathered (PPS), pediplain moderate weathered (PPM), and buried pediplain moderate (BPM)) showed a significant variation in recharge conditions among themselves. It was found from the study that Peninsular gneiss gives a net recharge value of 0.13 m/year/unit area when considered as a single unit w.r.t. lithology, whereas the same area considered with lith-geom classes gives recharge values between 0.1 and 0.41 m/year presenting a different assessment. It is also found from this study that the stage of development (SOD) for each lith-geom unit in Peninsular gneiss varies from 168 to 230 %, whereas the SOD is 223 % for the lithology as a single unit.

Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting

The present work discusses the findings obtained from simulations of semi solid die filling of a steering knuckle, prior to actual component development using in-house developed rheo pressure die casting system. Die filling capability of A356 Al alloy at semi-solid state has been investigated using commercial software Flow-3Dcast to optimise the pouring temperature of semi-solid slurry into the die cavity, while all other variables such as gating design, die preheat temperature and injection velocity are kept constant based on the prior knowledge obtained from trial numerical simulations and experimentation. Efforts have been made to nullify the essence of costly, time consuming experiments towards obtaining high-quality castings out of the findings obtained from numerical simulations. The optimum pouring temperature identified in the present study is 610 A degrees C, which facilitates smoother slurry flow, minimum surface defect concentration, uniform temperature field and solid fraction distribution within the component cavity.

Investigations of aerosol black carbon from a semi-urban site in the Indo-Gangetic Plain region

Long-term (2009-2012) data from ground-based measurements of aerosol black carbon (BC) from a semi-urban site, Pantnagar (29.0 degrees N, 79.5 degrees E, 231 m amsl), in the Indo-Gangetic Plain (IGP) near the Himalayan foothills are analyzed to study the regional characterization. Large variations are seen in BC at both diurnal and seasonal scales, associated with the mesoscale and synoptic meteorological processes, and local/regional anthropogenic activities. BC diurnal variations show two peaks (morning and evening) arising from the combined effects of the atmospheric boundary layer (ABL) dynamics and local emissions. The diurnal amplitudes as well as the rates of diurnal evolution are the highest in winter season, followed by autumn, and the lowest in summer-monsoon. BC exhibits nearly an inverse relation with mixing layer depth in all seasons; being strongest in winter (R-2 = 0.89) and weakest (R-2 = 0.33) in monsoon (July-August). Unlike BC, co-located aerosol optical depths (AOD) and aerosol absorption are highest in spring over IGP, probably due to the presence of higher abundances of aerosols (including dust) above the ABL (in the free troposphere). AOD (500 nm) showed annual peak (>0.6) in May-June, dominated by coarse mode, while fine mode aerosols dominated in late autumn and early winter. Aerosols profiles from CALIPSO show highest values close to the surface in winter/autumn, similar to the feature seen in surface BC, whereas at altitudes > 2 km, the extinction is maximum in spring/summer. WRF-Chem model is used to simulate BC temporal variations and then compared with observed BC. The model captures most of the important features of the diurnal and seasonal variations but significantly underestimated the observed BC levels, suggesting improvements in diurnal and seasonal varying BC emissions apart from the boundary layer processes. (C) 2015 Elsevier Ltd. All rights reserved.

Effect of semi-solid heat treatment on elevated temperature plasticity of 304L stainless steel

The present work explores the potential of semi-solid heat treatment technique by elucidating its effect on the plastic behavior of 304L SS in hot working domain. To accomplish this objective, hot isothermal compression tests on 304L SS specimens with semi-solid heat treatment and conventional annealing heat treatment have been carried out within a temperature range of 1273-1473 K and strain rates ranging from 0.01 to 1 s(-1). The dynamic flow behavior of this steel in its conventional heat-treated condition and semi-solid heat-treated condition has been characterized in terms of strain hardening, temperature softening, strain rate hardening, and dynamic flow softening. Extensive microstructural investigation has been carried out to corroborate the results obtained from the analysis of flow behavior. Detailed analysis of the results demonstrates that semi-solid heat treatment moderates work hardening, strain rate hardening, and temperature sensitivity of 304L SS, which is favorable for hot deformation. The post-deformation hardness values of semi-solid heat-treated steel and conventionally heat-treated steel were found to remain similar despite the pre-deformation heat treatment conditions. The results obtained demonstrate the potential of semi-solid heat treatment as a pre-deformation heat treatment step to effectively reduce the strength of the material to facilitate easier deformation without affecting the post-deformation properties of the steel.

Flame Propagation of H_2-Air in a Semi-Open Obstructed Tube

针对氢／空气混合物,通过实验研究了其预混火焰在半开口管道中的火焰传播加速现象,结果表明,火焰传播状态随着氢气当量比的变化而发生改变。当氢／空气混合物被点燃后,由于障碍物的扰动,火焰在管道中不断加速传播,并最终到达一准稳态传播。在氢气当量比0.31附近时,火焰速度发生跃变。当氢气当量比足够大时,火焰传播由爆燃态转变为爆轰态。在本实验条件下,爆燃转准爆轰的临界条件是d/Lambda>=2.6（d是圆环形障碍物内径,人是爆轰格胞尺度）。障碍物阻塞比的变化对最大火焰速度和压力提升的影响不明显。

Estudio del crecimiento del camarón de agua dulce (M rosenbergu), en condiciones semi-intensivas en la comunidad de Alos Encuentros, Municipio de Limay, Esteli

Con el propósito de determinar el comportamiento de rasgos de crecimiento del camarón de agua dulce M. rosenbergii. Se montó un ensayo en la comunidad de los Encuentros, municipio de Limay, Estelí. Para tal efecto se utilizaron tres estanques de tierra de 200m 3 c/u en los que se sembraron 5 post larvas/m2. La alimentación fue a base de concentrado con 35%, 25%, 20% de proteína respectivamente de manera igual para los tres estanques. Se efectuaron muestreos, de talla, peso con respecto a la edad siendo estos el primer muestreo al momento de la siembra el segundo a los 30 días y los restantes cada 20 días, hasta los 190 días que culminó el ensayo, para determinar el crecimiento de los camarones de agua dulce M. rosenhergií mediante análisis estadísticos se empleó el modelo no lineal sugerido por Pearl-read (1923) y = k/1+bea:. Para realizar un menor ajuste de los datos se procedió a linealizarlos por medio de una regresión con la ecuación: Ln (k/y)-1 = Lnb±ax. Para el primer estanque se construyó el modelo Ln(k/y)-1 = 6.69459 = 0.97948 (cm), el error estándar para Lnb y a son de 0.338010.57300 respectivamente, laPr> ltl iguala 1.0001con r2 = 0.976605 y C.V= 29.66412. En el segundo estanque se obtuvo Ln(kly)-1 = 6.53469- 0.89897 (cm) el error standard para Lnb y a son de 0.4235;0.6858. La Pr > ltl para ambos son de 0.0001 con r1 = 0.96084 y C.V= 36.20477, para el tercer estanque se tiene valores de Ln (k/y)-1 = 6.93459- 1.116595 (cm) con error standard de Lnb y a = 1.04923; 0.180752 y para Pr > ltl fue de 0.0003;0.0005 con un r2= 0.8450 y C.V = 126.7102, al hacer un análisis de regresión combinando los tres estanques se obtuvo valores deLn(k/y)-1 = 5.5224-0.8068 (cm) con errores standard de Lnb y a= O.2878; 0.480 y para Pr > ltl fue de 0.0001 con un r2=; 0.9700 y C.V = 31.489, el comportamiento de crecimiento de los camarones de agua dulce M. rosenbergii sometidos a estudio bajo las mismas condiciones de cultivo tuvieron diferencias de talla y peso siendo éstas de 0.331 cm; 2.S02 g. del estanque 2 vs estanque 1; 1.093 cm, 4.3500 g del estanque 2 vs estanque 3 y 0.762 cm; 1.848 g para el estanque 1 vs estanque 3, sin embargo para los estanques en estudio se observó un aumento de talla y peso entre los 110-130 días de edad.

Produccion y composicion de la leche de genotipos lecheros bajo condiciones semi-intensivas, en la hacienda Las Mercedes, Managua, Nicaragua

Con el propósito de evaluar el intervalo entre partos (IEP), producción de leche por día (PLDk) y composición de la leche en contenidos de grasa (FATT), proteína (PROTT), lactosa (LACTT), materia seca (DRYMT) y sólidos no gras os (SNFT) en genotipos lecheros (Holstein, Pardo suizo, Jersey y cruces entre estos y con Brahman) de la Finca Las Mercedes de la Universidad Nacional Agraria, manejado intensivamente, se utilizó información de producción del periodo 2005 – 2007, intervalo entre partos (IEP), pesajes de leche por día (diciembre 2005 a Junio 2007) y sus respectivos análisis de composición. Los análisis se efectuaron mediante modelos aditivos lineales que incluyeron efectos fijos de grupo racial (GR), año de parto (AP), númer o de parto (NP), época de parto (EP), periodo de lactancia (PLAC) y sexo de la cría (SC) e interacciones importantes. Para IEP, fueron importantes solamente las interacciones GRxAP (P<0.02), GRxEP (P<0.01) y NP x EP (P<0.07), no así para efectos principale s; se obtuvo una media de mínimos cuadrados para IEP de 14.4 meses y los valores oscilaron entre 11 y 18 meses. Para PLDk, se encontró diferencias importantes para todas las fuentes e interacciones, excepto para AP. PLDk mostró una media de mínimos cuadra dos de 7.5 kg. /día. Los GR 2 y 4 mostraron valores mayores que 12 kg. /día; el parto 3 presento la mayor producción (10.3 kg /día); la época de parto 1 (lluvia) mostró 1.5 kg de leche mayor que la época seca; la tendencia de la curva de lactancia a lo lag o de los PLAC resulto un poco atípica sin pico de producción. De la composición de la leche, los efectos de GR, AP y PLAC resultaron importantes sobre todas las características; los promedios generales para grasa, proteína, lactosa, materia seca y sólidos no grasos fueron de 3.78%, 3.08%, 3.66%, 11.25%, 7.46%, respectivamente. El GR 2 mostró valores mayores en composición de leche; y en general, si se incrementa el volumen de leche por día se reducen todos los parámetros de composición, visto más clarament e en la curva de lactación a través de PLAC. La información generada puede sustentar las políticas de utilización de estos genotipos en Las Mercedes.

Sincronización hormonal del estro en cabras criollas, bajo condiciones semi-intensivas de trópico seco en Nicaragua

El objetivo de este estudio fue evaluar la efectividad de dos tratamientos hormonales en la sincronización del estro en hembras caprinas bajo condiciones semi intensivas del trópico seco. Cada unidad experimental estuvo representada por una hembra caprina reproductora, cuya edad osciló entre los 3½ años con pesos promedios de 38 kg pv, se utilizó un total de 30 hembras. Estas se distribuyeron en tres tratamientos, conformados por diez unidades experimentales cada uno. Tratamiento 1 :EAZI-BREED ® -CIDR ® vía intravaginal, conteniendo 300 mg (0.3 g) de progesterona sintética (que liberó 20 mg d -1 aproximadamente) + ECP (Cipionato de Estradiol) a razón de 2.5ml, vía intramuscular (3 mg/ml) al noveno día (después de retirar el CIDR ® ), se aplicó 3ml de Lutalyse ® (PGF2α, 5 mg Dinopróstamina por ml) vía intramuscular; El segundo tratamiento fue conformada: EAZI-BREED ® -CIDR ® + Lutalyse ® (PGF2α) al retiro del CIDR ® ; Tratamiento 3: control o efecto macho (estas fueron expuestas al macho de forma continua durante toda la duración del experimento). Se detectó celo después de retirar el CIDR ® , a intervalos de 24, 48, 72 y 96 horas. Los resultados obtenidos para las variables en estudio, mostraron que la variable detección de celo fue altamente significativa (P<0.01), estado gestacional fue significativa (P<0.05); mientras que para las variables aparición de celo (h) y número de embriones, no se encontraron diferencias significativas (P˃ 0.05). La sobrevivencia embrionaria por tratamiento fue de 85% para T1, 80% para T2 y 70% para T3. El análisis financiero determino que el tratamiento T2 fue el más viable.

Probabilistic graphical models for semi-supervised traffic classification

Traffic classification using machine learning continues to be an active research area. The majority of work in this area uses off-the-shelf machine learning tools and treats them as black-box classifiers. This approach turns all the modelling complexity into a feature selection problem. In this paper, we build a problem-specific solution to the traffic classification problem by designing a custom probabilistic graphical model. Graphical models are a modular framework to design classifiers which incorporate domain-specific knowledge. More specifically, our solution introduces semi-supervised learning which means we learn from both labelled and unlabelled traffic flows. We show that our solution performs competitively compared to previous approaches while using less data and simpler features. Copyright © 2010 ACM.

在InGaAsP/InP双异质结构中的光弹效应及其对侧向光的限制作用

从理论上计算了厚度为110nm的W_(0.95)Ni_(0.05)金属薄膜应变条在InGaAsP/InP双异质结构中形成的应力场分布，及由应力场分布引起的折射率变化。在W_(0.95)Ni_(0.05)金属薄膜应变条半导体中0.2-2μm深度范围内，由应变引起条形波导轴中央的介电常数ε相应增加2.3×10~(-1)-2.2×10~(-2)(2μm应变条宽)和1.2×10~(-1)-4.1×10~(-2)(4μm应变条宽)。同时，测量了由W_(0.95)Ni_(0.05)金属薄膜应变条所形成的InGaAs/InP双异质结光弹效应波导结构导波的近场光模分布。从理论计算和实验结果两方面证实了InGaAsP/InP双异质结光弹效应波导结构对侧向光具有良好的限制作用。

The effect of inclined soil layers on surface vibration from underground railways using a semi-analytical approach

Ground vibration due to underground railways is a significant source of disturbance for people living or working near the subways. The numerical models used to predict vibration levels have inherent uncertainty which must be understood to give confidence in the predictions. A semi-analytical approach is developed herein to investigate the effect of soil layering on the surface vibration of a halfspace where both soil properties and layer inclination angles are varied. The study suggests that both material properties and inclination angle of the layers have significant effect ( ± 10dB) on the surface vibration response. © 2009 IOP Publishing Ltd.

Semi-analytic slope delay model for CMOS switch-level timing verification

A novel slope delay model for CMOS switch-level timing verification is presented. It differs from conventional methods in being semianalytic in character. The model assumes that all input waveforms are trapezoidal in overall shape, but that they vary in their slope. This simplification is quite reasonable and does not seriously affect precision, but it facilitates rapid solution. The model divides the stages in a switch-level circuit into two types. One corresponds to the logic gates, and the other corresponds to logic gates with pass transistors connected to their outputs. Semianalytic modeling for both cases is discussed.