Produção de biscoitos extrusados de polvilho azedo com fibras: efeito de parâmetros operacionais sobre as propriedades físicas

Neste trabalho buscou-se avaliar o efeito de parâmetros operacionais do processo de extrusão no desenvolvimento de biscoitos de polvilho com fibras, utilizando como matérias-primas o polvilho azedo e o farelo de mandioca. O processamento foi realizado em um extrusor mono-rosca, sendo considerados parâmetros variáveis: temperatura na 3ª zona de extrusão, umidade e porcentagem de fibras na mistura. Para analisar o efeito combinado das variáveis independentes nas características tecnológicas dos extrusados, utilizou-se o delineamento 'central composto rotacional' para três fatores. Os resultados obtidos mostraram efeitos significativos da umidade e porcentagem de fibras sobre o volume específico, sendo que a temperatura afetou os índices de solubilidade e absorção de água dos produtos extrusados. Condições de baixa temperatura (65 °C), baixa umidade (12%) e baixo teor de fibras (<4%), nas condições de processo utilizadas, produzem biscoitos com boas características tecnológicas.

Efeito dos parâmetros de extrusão sobre as propriedades funcionais de extrusados da farinha de batata-doce

Farinha de batata-doce (Ipomoea batatas) foi extrusada em equipamento de rosca simples, mantendo-se fixas as temperaturas na 1ª e 2ª zonas de extrusão (20ºC e 60ºC, respectivamente). O efeito das variáveis umidade da farinha (15, 18 e 21%), temperatura na 3ª zona (100, 120 e 140ºC) e rotação da rosca (180, 210 e 240 rpm) sobre as características dos extrusados foi investigado utilizando-se metodologia de superfície de resposta. O teor de umidade e a temperatura de extrusão influenciaram significativamente a expansão dos extrusados. O índice de expansão apresentou valores crescentes com a temperatura sob baixos teores de umidade. A dureza dos extrusados e também o índice de absorção de água e o índice de solubilidade em água das farinhas extrusadas não mostraram modelo de regressão significativo com as condições de processo. Quanto à cor das farinhas, o componente L* (luminosidade) apresentou valores crescentes e o parâmetro a*, valores decrescentes com a elevação do teor de umidade até 20-21%. O parâmetro b* e a diferença de cor entre farinhas extrusadas e não extrusadas mostraram valores decrescentes com o aumento da umidade.

Thermal and pasting properties of cassava starch-dehydrated orange pulp blends

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito de parâmetros de extrusão na cor E propriedades de pasta da farinha de mandioquinha-salsa (Arracacia xanthorrhiza)

Processou-se neste trabalho a farinha de mandioquinha-salsa (Arracacia xanthorrhiza Bancr.) em uma linha de extrusão (mono rosca) variando as condições operacionais: umidade da farinha (11-19%), temperatura de extrusão (86-154ºC) e taxa de rotação da rosca (136-272rpm). Os parâmetros de cor analisados foram luminosidade (L*) e os componentes de cromaticidade a* e b*. Os parâmetros de propriedade de pasta analisados foram viscosidade inicial, pico de viscosidade, quebra de viscosidade, tendência a retrogradação e viscosidade final. Os resultados obtidos mostraram que a umidade da matéria-prima interferiu nos componentes de cor das farinhas com efeito significativo sobre a luminosidade e croma a*, e a temperatura interferiu no croma b* . Quanto ao efeito dos parâmetros de processo sobre as propriedades de pasta, a umidade interferiu nas viscosidades inicial e final dos produtos, pico e quebra de viscosidade, enquanto a temperatura de extrusão e a rotação da rosca tiveram influência sobre a tendência a retrogradação e viscosidade final dos produtos.

Parasitic infection of the appendix as a cause of acute appendicitis

The association between parasitic infection of the appendix and acute appendicitis has been widely investigated. The aim of this retrospective study was to evaluate the prevalence of parasitic infection of the appendix in a tropical area at southeast Brazil and to assess its possible relation to acute appendicitis in surgically removed appendices. of the 1,600 appendectomies performed during a 10-year period, 24 (1.5%) were found to have helminths within the appendix. Enterobius vermicularis was observed in 23 of the 24 specimens (95.8%), and Taenia sp. was detected in only one case. Sixteen patients (66.7%) were less than 10 years old; 15 patients were male and nine female; 21 patients were white, and three were nonwhites. Pathologic analysis disclosed acute neutrophilic inflammation in the appendix wall in 12 of the 24 specimens and lymphoid hyperplasia in 10 of the 24 appendices. Gangrenous appendicitis was diagnosed in three cases, and peritonitis was found in 11 of the 24 infected appendices. The results of the present study indicate that E. vermicularis is the commonest worm found in the appendix and that its presence can cause pathologic changes ranging from lymphoid hyperplasia to acute phlegmonous inflammation with life-threatening complications like gangrene and peritonitis.

Modified stabilization method for the tibial tuberosity advancement technique: a biomechanical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mechanical resistance of the modified stabilization method for the tibial tuberosity advancement technique: ex vivo experimental study in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Cymbopogon schoenanthus essential oil in lambs experimentally infected with Haemonchus contortus

Hematophagous gastrointestinal parasites cause significant economic losses in small ruminant grazing systems. The growing reports of multi-drug resistant parasites call for intensive research on alternative treatments for anthelmintics to help small ruminants cope with these parasites. Two-month-old lambs with mean body weight (BW) of 22.5 kg were experimentally infected with a multidrug-resistant Haemonchus contortus strain. Infected animals were dosed orally with Cymbopogon schoenanthus essential oil to evaluate its anthelmintic potential. Eighteen animals were allocated into three groups of six animals, and each received one of the following treatments: Group 1 - control (10 mL of water), Group 2 - C. schoenanthus essential oil (180 mg/kg BW); and Group 3 - C schoenanthus essential oil (360 mg/kg BW). Animals received the oil once a day for 3 consecutive days. Lambs were evaluated clinically for blood biochemistry before, at 1, 5, 10, 15 and 20 days after treatment, and then were euthanized to assess the total worm burden. No statistically significant reduction in fecal egg count, packed cell volume or total worm count was observed after treatments. Also, no statistical difference among group means for blood levels of urea, creatinine, albumin, alkaline phosphatase, aspartate aminotransferase and gamma glutamyl transferase was found. Larval development assay (LDA) and egg hatch assay (EHA) were performed from feces of treated animals at 1, 5, 10 and 15 days after essential oil administration. An inhibition in LDA was observed 1 day after the 3-day treatment in larvae from feces of animals treated with 360 mg/kg essential oil. In conclusion, the essential oil at the doses of 180 mg/kg and 360 mg/kg was safe to sheep, but failed as an anthelmintic treatment when applied to young sheep artificially infected with a multidrug-resistant H. contortus strain. (C) 2011 Elsevier B.V. All rights reserved.

Use of extensible internal device in the femur of young dogs

An extensible internal device (EID) was developed to preserve growth plate during the treatment of fracture complications or segmental bone loss from tumour resection in children. Since this type of extensible, trans-physeal, internal fixation device has only been used in a few paediatric cases; the aim of this study was to evaluate an in vivo canine study, a surgical application of this device, and its interference with longitudinal growth of the non-fractured distal femur. Ton clinically healthy two- to three-month-old poodles weighing 1.5-2.3 kg were used. Following a medial approach to the right distal femur, one extremity of the EID, similar to a T-plate, was fixed in the femoral condyle with two cortical screws placed below the growth plate. The other extremity, consisting of an adaptable brim with two screw holes and a plate guide, was fixed in the third distal of the femoral diaphysis with two cortical screws. The EID was removed 180 days after application. All of the dogs demonstrated full weight-bearing after surgery. The values of thigh and stifle circumferences, and stifle joint motion range did not show any difference between operated and control hindlimbs. The plate slid in the device according to longitudinal bone growth, in all but one dog. In this dog, a 10.5% shortening of the femoral shaft was observed due to a lack of EID sliding. The other dogs had the some longitudinal lengths in both femurs. The EID permits longitudinal bone growth without blocking the distal femur growth plate if appropriately placed.

Finite Element Modeling for Development and Optimization of a Bone Plate for Mandibular Fracture in Dogs

This study aimed to develop a plate to treat fractures of the mandibular body in dogs and to validate the project using finite elements and biomechanical essays. Mandible prototypes were produced with 10 oblique ventrorostral fractures (favorable) and 10 oblique ventrocaudal fractures (unfavorable). Three groups were established for each fracture type. Osteosynthesis with a pure titanium plate of double-arch geometry and blocked monocortical screws offree angulanon were used. The mechanical resistance of the prototype with unfavorable fracture was lower than that of the fcworable fracture. In both fractures, the deflection increased and the relative stiffness decreased proportionally to the diminishing screw number The finite element analysis validated this plate study, since the maximum tension concentration observed on the plate was lower than the resistance limit tension admitted by the titanium. In conclusion, the double-arch geometry plate fixed with blocked monocortical screws has sufficient resistance to stabilize oblique,fractures, without compromising mandibular dental or neurovascular structures. J Vet Dent 24 (7); 212 - 221, 2010

Evaluation of Torque Maintenance of Abutment and Cylinder Screws With Morse Taper Implants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Cusp Inclination on Stress Distribution in Implant-Supported Prostheses. A Three-Dimensional Finite Element Analysis

Purpose: The aim of this study was to assess the influence of cusp inclination on stress distribution in implant-supported prostheses by 3D finite element method.Materials and Methods: Three-dimensional models were created to simulate a mandibular bone section with an implant (3.75 mm diameter x 10 mm length) and crown by means of a 3D scanner and 3D CAD software. A screw-retained single crown was simulated using three cusp inclinations (10 degrees, 20 degrees, 30 degrees). The 3D models (model 10d, model 20d, and model 30d) were transferred to the finite element program NeiNastran 9.0 to generate a mesh and perform the stress analysis. An oblique load of 200 N was applied on the internal vestibular face of the metal ceramic crown.Results: The results were visualized by means of von Mises stress maps. Maximum stress concentration was located at the point of application. The implant showed higher stress values in model 30d (160.68 MPa). Cortical bone showed higher stress values in model 10d (28.23 MPa).Conclusion: Stresses on the implant and implant/abutment interface increased with increasing cusp inclination, and stresses on the cortical bone decreased with increasing cusp inclination.

Influence of the Connector and Implant Design on the Implant-Tooth-Connected Prostheses

Purpose:The purpose of this study was to evaluate stress transfer patterns between implant-tooth-connected prostheses comparing rigid and semirigid connectors and internal and external hexagon implants.Materials and Methods:Two models were made of photoelastic resin PL-2, with an internal hexagon implant of 4.00 x 13 mm and another with an external hexagon implant of 4.00 x 13 mm. Three denture designs were fabricated for each implant model, incorporating one type of connection in each one to connect implants and teeth: 1) welded rigid connection; 2) semirigid connection; and 3) rigid connection with occlusal screw. The models were placed in the polariscope, and 100-N axial forces were applied on fixed points on the occlusal surface of the dentures.Results:There was a trend toward less intensity in the stresses on the semirigid connection and solid rigid connection in the model with the external hexagon; among the three types of connections in the model with the internal hexagon implant, the semirigid connection was the most unfavorable one; in the tooth-implant association, it is preferable to use the external hexagon implant.Conclusions:The internal hexagon implant establishes a greater depth of hexagon retention and an increase in the level of denture stability in comparison with the implant with the external hexagon. However, this greater stability of the internal hexagon generated greater stresses in the abutment structures. Therefore, when this association is necessary, it is preferable to use the external hexagon implant.

Photoelastic Stress Analysis in Screwed and Cemented Implant-Supported Dentures With External Hexagon Implants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bone Spreading and Standardized Dilation of Horizontally Resorbed Bone: Technical Considerations

The uses of a new bone spreading technique with simultaneous implant placement are discussed. The spreading system is an alternative technique to Summers' osteotome. Specific screw designs (spreader) served to laterally compress the bone to increase the cancellous density adjacent to the site. The spreader achieved a controlled and standardized dilation of horizontal bone. The advantages, material selection, and the application of this new procedure are detailed. (Implant Dent 2009; 18:119-125)