Chronic workplace stress and insufficient physical activity: a cohort study

Objectives To examine whether exposure to workplace stressors predicts changes in physical activity and the risk of insufficient physical activity.

Methods Prospective data from the Finnish Public Sector Study. Repeated exposure to low job control, high job demands, low effort, low rewards and compositions of these (job strain and effort-reward imbalance) were assessed at Time 1 (2000-2002) and Time 2 (2004). Insufficient physical activity (<14 metabolic equivalent task hours per week) was measured at Time 1 and Time 3 (2008). The effect of change in workplace stressors on change in physical activity was examined using fixed-effects (within-subject) logistic regression models (N=6665). In addition, logistic regression analysis was applied to examine the associations between repeated exposure to workplace stressors and insufficient physical activity (N=13 976). In these analyses, coworker assessed workplace stressor scores were used in addition to individual level scores.

Results The proportion of participants with insufficient physical activity was 24% at baseline and 26% at follow-up. 19% of the participants who were sufficiently active at baseline became insufficiently active at follow-up. In the fixed-effect analysis, an increase in workplace stress was weakly related to an increase in physical inactivity within an individual. In between-subjects analysis, employees with repeated exposure to low job control and low rewards were more likely to be insufficiently active at follow-up than those with no reports of these stressors; fully adjusted ORs ranged from 1.11 (95% CI 1.00 to 1.24) to 1.21 (95% CI 1.05 to 1.39).

Conclusions Workplace stress is associated with a slightly increased risk of physical inactivity.

Job Strain as a Risk Factor for Leisure-Time Physical Inactivity: An Individual-Participant Meta-Analysis of Up to 170,000 Men and Women

Unfavorable work characteristics, such as low job control and too high or too low job demands, have been suggested to increase the likelihood of physical inactivity during leisure time, but this has not been verified in large-scale studies. The authors combined individual-level data from 14 European cohort studies (baseline years from 19851988 to 20062008) to examine the association between unfavorable work characteristics and leisure-time physical inactivity in a total of 170,162 employees (50 women; mean age, 43.5 years). Of these employees, 56,735 were reexamined after 29 years. In cross-sectional analyses, the odds for physical inactivity were 26 higher (odds ratio 1.26, 95 confidence interval: 1.15, 1.38) for employees with high-strain jobs (low control/high demands) and 21 higher (odds ratio 1.21, 95 confidence interval: 1.11, 1.31) for those with passive jobs (low control/low demands) compared with employees in low-strain jobs (high control/low demands). In prospective analyses restricted to physically active participants, the odds of becoming physically inactive during follow-up were 21 and 20 higher for those with high-strain (odds ratio 1.21, 95 confidence interval: 1.11, 1.32) and passive (odds ratio 1.20, 95 confidence interval: 1.11, 1.30) jobs at baseline. These data suggest that unfavorable work characteristics may have a spillover effect on leisure-time physical activity.

A randomised control trial of experiential learning to promote physical activity

The paucity of training in physical activity (PA) promotion in UK medical schools is a barrier to health professionals' promotion of PA to their patients. Doctors who are more physically active are more likely to counsel patients in this regard. We used a randomised controlled trial (RCT) to examine the effect of an intervention which engaged students in goal-setting, using pedometer step counts, on their PA behaviour and intentions to promote PA in future practice.

Structural investigation of the promotional effect of hydrogen during the selective catalytic reduction of NOx with hydrocarbons over Ag/Al2O3 catalysts

In situ EXAFS has been used to examine the hydrogen effect on the selective catalytic reduction of NOx over silver/alumina catalysts. For all SCR conditions used, with or without co-reductant (H-2 or CO), the catalyst structure remained the same. Significant changes in the catalyst were only found under reducing conditions. The enhanced activity found in the presence of hydrogen is thought to be due to a chemical effect and not the result of a change in the structure of the active site.

Effect of postweld heat treatment on the microstructure and cyclic deformation behavior of laser-welded NiTi-shape memory wires

NiTi wires of 0.5 mm diameter were laser welded using a CW 100-W fiber laser in an argon shielding environment with or without postweld heat-treatment (PWHT). The microstructure and the phases present were studied by scanning-electron microscopy (SEM), transmission-electron microscopy (TEM), and X-ray diffractometry (XRD). The phase transformation behavior and the cyclic stress–strain behavior of the NiTi weldments were studied using differential scanning calorimetry (DSC) and cyclic tensile testing. TEM and XRD analyses reveal the presence of Ni4Ti3 particles after PWHT at or above 623 K (350 °C). In the cyclic tensile test, PWHT at 623 K (350 °C) improves the cyclic deformation behavior of the weldment by reducing the accumulated residual strain, whereas PWHT at 723 K (450 °C) provides no benefit to the cyclic deformation behavior. Welding also reduces the tensile strength and fracture elongation of NiTi wires, but the deterioration could be alleviated by PWHT.

In situ FTIR studies of the effect of temperature on the adsorption and electrooxidation of CO at the Ru(0001) electrode surface

The adsorption and electrooxidation of CO at a Ru(0001) electrode in perchloric acid solution have been investigated as a function of temperature, potential and time using in situ FTIR spectroscopy. This builds upon and extends previous work on the same system carried out at room temperature. As was observed at room temperature, both linear (CO) and 3-fold-hollow (CO) binding CO adsorbates (bands at 2000-2045 cm and 1768-1805 cm, respectively) were detected on the Ru(0001) electrode at 10°C and 50°C. However, the temperature of the Ru(0001) electrode had a significant effect upon the structure and behavior of the CO adlayer. At 10°C, the in-situ FTIR data showed that the adsorbed CO species still remain in rather compact islands up to ca. 1100 mV vs Ag/AgCl as the CO oxidation reaction proceeds, with oxidation occurring only at the boundaries between the CO and active surface oxide/hydroxide domains. However, the IR data collected at 50°C strongly suggest that the adsorbed CO species are present as relatively looser and weaker structures, which are more easily electro-oxidized. The temperature-, potential-, and coverage-dependent relaxation and compression of the CO adlayer at low coverages are also discussed.

Influence of chloride, water, and organic solvents on the physical properties of ionic liquids

We report here the first systematic study of the effect of impurities and additives (e.g., water, chloride, and cosolvents) on the physical properties of room-temperature ionic liquids. Remarkably, it was discovered that the viscosity of mixtures was dependent mainly on the mole fraction of added molecular solvents and only to a lesser extent upon their identity, allowing viscosity changes during the course of a reaction to be entirely predictable. While the addition of such molecular solvents decreases the viscosity and density, chloride impurities, arising from the preparation of the ionic liquids, increase viscosity dramatically. The commonly used methods of preparation were validated with respect to chloride impurity.

Biomechanics of Vertebroplasty: Effect of Cement Viscosity on Mechanical Behaviour

Vertebroplasty is a minimally invasive surgical procedure, which requires efficacious percutaneous cement delivery via a cannulated needle to restore the strength and stiffness in osteoporotic vertebral bodies. Cement viscosity is understood to influence the injectability, cohesion and cement retention within the vertebral body. Altering the liquid to powder ratio modifies the viscosity of bone cement; however, the cement viscosity-response association between cement fill and augmentation of strength and stiffness is unknown. The aim of this study was to determine the relationship between viscosity, cement fill and the potential augmentation of strength and stiffness in an open pore foam structure that was representative of osteoporotic cancellous bone using an in vitro prophylactic vertebroplasty model. The results showed a strong linear correlation between compressive strength and stiffness augmentation with percentage cement fill, the extent of which was strongly dependent on the cement viscosity. Significant forces were required to ensure maximum delivery of the high viscosity cement using a proprietary screw-driven cement delivery technology. These forces could potentially exceed the normal human physical limit. Similar trends were observed when comparing the results from this study and previously reported cadaveric and animal based in vitro models.

The prospective effects of workplace violence on physicians' job satisfaction and turnover intentions: the buffering effect of job control

Background: Health care professionals, including physicians, are at high risk of encountering workplace violence. At the same time physician turnover is an increasing problem that threatens the functioning of the health care sector worldwide. The present study examined the prospective associations of work-related physical violence and bullying with physicians’ turnover intentions and job satisfaction. In addition, we tested whether job control would modify these associations.

Methods: The present study was a 4-year longitudinal survey study, with data gathered in 2006 and 2010.The present sample included 1515 (61% women) Finnish physicians aged 25–63 years at baseline. Analyses of covariance (ANCOVA) were conducted while adjusting for gender, age, baseline levels, specialisation status, and employment sector.

Results: The results of covariance analyses showed that physical violence led to increased physician turnover intentions and that both bullying and physical violence led to reduced physician job satisfaction even after adjustments. We also found that opportunities for job control were able to alleviate the increase in turnover intentions resulting from bullying.

Conclusions: Our results suggest that workplace violence is an extensive problem in the health care sector and may lead to increased turnover and job dissatisfaction. Thus, health care organisations should approach this problem through different means, for example, by giving health care employees more opportunities to control their own work.

Physical Activity and Cognitive Function in the Elderly: a Systematic Review

Background: Physical activity appears important contributor for healthy aging, including cognitive function. However, it is unclear whether late life physical activity alone is beneficial to cognitive function. We performed a systematic review to examine the effect of late life physical activity in maintaining cognitive function in older persons.
Methods: Search Strategy and Selection criteria: The search sources consisted of PubMed, MEDLINE, CINAHL, Cochrane Controlled Trials Register (CENTRAL), and the University of Washington Medical School Library Database between July 15, 2011 and August 15, 2012 with language restricted to English. Studies that were published in journals on or after January 2000 with participants older than 60 years of age were reviewed. Randomized controlled trials including at least 30 participants and lasting for at least 6 months and all observational studies of at least 100 participants and lasting at least 1 year in duration were eligible for inclusion Two reviewers assessed the applicability and results of these studies.
Results: Twenty-six studies fulfilling the inclusion criteria are included. Twenty-one studies reported that late life physical activity resulted in maintenance or enhancement of cognitive function. Three studies reported a dose-response relationship between physical activity and cognition.
Conclusions: Late life physical activity is beneficial for cognitive function in the elderly. However, the majority of the evidence is of medium quality with moderate risk of bias. Larger, randomized controlled trials are needed to better define the association between late life physical activity and cognitive function. Further research is required to determine which types of exercise have the greatest benefits on specific cognitive domains. Despite these caveats, current data are sufficient to recommend that moderate level, late life physical activity may be an effective method to improve cognitive function and delay the onset and progression of cognitive disease in the elderly.

Pressure effect on vibrational frequency and dephasing of 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids

Raman spectra in the range of the totally symmetric stretching mode of the [PF6]− anion, νs(PF6), have been measured for 1-alkyl-3-methylimidazolium ionic liquids [CnC1im][PF6], for n = 4, 6, and 8, as a function of pressure at room temperature. The ionic liquids [C6C1im][PF6] and [C8C1im][PF6] remain in an amorphous phase up to 3.5 GPa, in contrast to [C4C1im][PF6], whichcrystallizes above ∼0.5 GPa. Equations of state based either on a group contribution model or Carnahan-Starling-van der Waals model have been used to estimate the densities of the ionic liquids at high pressures. The shifts of the vibrational frequency of νs(PF6) with density observed in [C6C1im][PF6] and in [C8C1im][PF6] have been calculated by a hard-sphere model of a pseudo-diatomic solute under short-range repulsive interactions with the neighboring particles. The stochastic model of Kubo for vibrational dephasing has been used to obtain the amplitude of vibrational frequency fluctuation, ⟨Δω 2⟩, and the relaxation time of frequency fluctuation, τ c , as a function of density by Raman band shape analysis of the νs(PF6) mode of [C6C1im][PF6] and [C8C1im][PF6].

Association of physical activity with future mental health in older, mid-life and younger women

Background: Mental ill-health, particularly depression and anxiety, is a leading and increasing cause of disability worldwide, especially for women.

Methods: We examined the prospective association between physical activity and symptoms of mental ill-health in younger, mid-life and older working women. Participants were 26 913 women from the ongoing cohort Finnish Public Sector Study with complete data at two phases, excluding those who screened positive for mental ill-health at baseline. Mental health was assessed using the 12-item General Health Questionnaire. Self-reported physical activity was expressed in metabolic equivalent task (MET) hours per week. Logistic regression models were used to analyse associations between physical activity levels and subsequent mental health.

Results: There was an inverse dose–response relationship between physical activity and future symptoms of mental ill-health. This association is consistent with a protective effect of physical activity and remained after adjustments for socio-demographic, work-related and lifestyle factors, health and body mass index. Furthermore, those mid-life and older women who reported increased physical activity by more than 2 MET hours per week demonstrated a reduced risk of later mental ill-health in comparison with those who did not increase physical activity. This protective effect of increased physical activity did not hold for younger women.

Conclusions: This study adds to the evidence for the protective effect of physical activity for later mental health in women. It also suggests that increasing physical activity levels may be beneficial in terms of mental health among mid-life and older women. The alleviation of menopausal symptoms may partly explain age effects but further research is required.

Effect of interparticle interaction in a free-oscillation atomic interferometer

We investigate the dynamics of two interacting bosons repeatedly scattering off a beam-splitter in a free oscillation atom interferometer. Using the interparticle scattering length and the beam-splitter probabilites as our control parameters, we show that even in a simple setup like this a wide range of strongly correlated quantum states can be created. This in particular includes the NOON state, which maximizes the quantum Fisher information and is a foremost state in quantum metrology. DOI: 10.1103/PhysRevA.87.043630

Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: A finite element analysis

The effect of preparation design and the physical properties of the interface lute on the restored machined ceramic crown-tooth complex are poorly understood. The aim of this work was to determine, by means of three-dimensional finite element analysis (3D FEA) the effect of the tooth preparation design and the elastic modulus of the cement on the stress state of the cemented machined ceramic crown-tooth complex. The three-dimensional structure of human premolar teeth, restored with adhesively cemented machined ceramic crowns, was digitized with a micro-CT scanner. An accurate, high resolution, digital replica model of a restored tooth was created. Two preparation designs, with different occlusal morphologies, were modeled with cements of 3 different elastic moduli. Interactive medical image processing software (mimics and professional CAD modeling software) was used to create sophisticated digital models that included the supporting structures; periodontal ligament and alveolar bone. The generated models were imported into an FEA software program (hypermesh version 10.0, Altair Engineering Inc.) with all degrees of freedom constrained at the outer surface of the supporting cortical bone of the crown-tooth complex. Five different elastic moduli values were given to the adhesive cement interface 1.8 GPa, 4 GPa, 8 GPa, 18.3 GPa and 40 GPa; the four lower values are representative of currently used cementing lutes and 40 GPa is set as an extreme high value. The stress distribution under simulated applied loads was determined. The preparation design demonstrated an effect on the stress state of the restored tooth system. The cement elastic modulus affected the stress state in the cement and dentin structures but not in the crown, the pulp, the periodontal ligament or the cancellous and cortical bone. The results of this study suggest that both the choice of the preparation design and the cement elastic modulus can affect the stress state within the restored crown-tooth complex.