Simulação de perfis nucleares de poço em formações complexas

A identificação e descrição dos caracteres litológicos de uma formação são indispensáveis à avaliação de formações complexas. Com este objetivo, tem sido sistematicamente usada a combinação de ferramentas nucleares em poços não-revestidos. Os perfis resultantes podem ser considerados como a interação entre duas fases distintas: • Fase de transporte da radiação desde a fonte até um ou mais detectores, através da formação. • Fase de detecção, que consiste na coleção da radiação, sua transformação em pulsos de corrente e, finalmente, na distribuição espectral destes pulsos. Visto que a presença do detector não afeta fortemente o resultado do transporte da radiação, cada fase pode ser simulada independentemente uma da outra, o que permite introduzir um novo tipo de modelamento que desacopla as duas fases. Neste trabalho, a resposta final é simulada combinando soluções numéricas do transporte com uma biblioteca de funções resposta do detector, para diferentes energias incidentes e para cada arranjo específico de fontes e detectores. O transporte da radiação é calculado através do algoritmo de elementos finitos (FEM), na forma de fluxo escalar 2½-D, proveniente da solução numérica da aproximação de difusão para multigrupos da equação de transporte de Boltzmann, no espaço de fase, dita aproximação P₁, onde a variável direção é expandida em termos dos polinômios ortogonais de Legendre. Isto determina a redução da dimensionalidade do problema, tornando-o mais compatível com o algoritmo FEM, onde o fluxo dependa exclusivamente da variável espacial e das propriedades físicas da formação. A função resposta do detector NaI(Tl) é obtida independentemente pelo método Monte Carlo (MC) em que a reconstrução da vida de uma partícula dentro do cristal cintilador é feita simulando, interação por interação, a posição, direção e energia das diferentes partículas, com a ajuda de números aleatórios aos quais estão associados leis de probabilidades adequadas. Os possíveis tipos de interação (Rayleigh, Efeito fotoelétrico, Compton e Produção de pares) são determinados similarmente. Completa-se a simulação quando as funções resposta do detector são convolvidas com o fluxo escalar, produzindo como resposta final, o espectro de altura de pulso do sistema modelado. Neste espectro serão selecionados conjuntos de canais denominados janelas de detecção. As taxas de contagens em cada janela apresentam dependências diferenciadas sobre a densidade eletrônica e a fitologia. Isto permite utilizar a combinação dessas janelas na determinação da densidade e do fator de absorção fotoelétrico das formações. De acordo com a metodologia desenvolvida, os perfis, tanto em modelos de camadas espessas quanto finas, puderam ser simulados. O desempenho do método foi testado em formações complexas, principalmente naquelas em que a presença de minerais de argila, feldspato e mica, produziram efeitos consideráveis capazes de perturbar a resposta final das ferramentas. Os resultados mostraram que as formações com densidade entre 1.8 e 4.0 g/cm³ e fatores de absorção fotoelétrico no intervalo de 1.5 a 5 barns/e^-, tiveram seus caracteres físicos e litológicos perfeitamente identificados. As concentrações de Potássio, Urânio e Tório, puderam ser obtidas com a introdução de um novo sistema de calibração, capaz de corrigir os efeitos devidos à influência de altas variâncias e de correlações negativas, observadas principalmente no cálculo das concentrações em massa de Urânio e Potássio. Na simulação da resposta da sonda CNL, utilizando o algoritmo de regressão polinomial de Tittle, foi verificado que, devido à resolução vertical limitada por ela apresentada, as camadas com espessuras inferiores ao espaçamento fonte - detector mais distante tiveram os valores de porosidade aparente medidos erroneamente. Isto deve-se ao fato do algoritmo de Tittle aplicar-se exclusivamente a camadas espessas. Em virtude desse erro, foi desenvolvido um método que leva em conta um fator de contribuição determinado pela área relativa de cada camada dentro da zona de máxima informação. Assim, a porosidade de cada ponto em subsuperfície pôde ser determinada convolvendo estes fatores com os índices de porosidade locais, porém supondo cada camada suficientemente espessa a fim de adequar-se ao algoritmo de Tittle. Por fim, as limitações adicionais impostas pela presença de minerais perturbadores, foram resolvidas supondo a formação como que composta por um mineral base totalmente saturada com água, sendo os componentes restantes considerados perturbações sobre este caso base. Estes resultados permitem calcular perfis sintéticos de poço, que poderão ser utilizados em esquemas de inversão com o objetivo de obter uma avaliação quantitativa mais detalhada de formações complexas.

Desenvolvimento de um biorreator rotativo para produção de enzimas celulolíticas por fermentação em estado sólido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Intraocular pressure, specular microscopy, and prostaglandin E-2 concentration in dogs with mature and hypermature cataract

This study aimed to evaluate and correlate intraocular pressure (IOP), endothelial cell density (CD), and hexagonality (HEX), and the aqueous humor prostaglandin E-2 (PGE(2)) concentration in dogs with mature (MG, n = 8) and hypermature (HG, n = 8) cataracts. Eight laboratory beagles with no ocular abnormalities were included as a control group (CG). The IOP was measured using a digital applanation tonometer. Noncontact specular microscopy was used to evaluate CD and HEX. Samples of aqueous humor were used to determine prostaglandin E-2 concentration using enzyme-linked immunoassay. Data were compared by ANOVA and Bonferroni's multiple comparison test, and possible correlations among the PGE(2) aqueous concentration and corneal endothelium cell parameters were assessed by Person's test (P < 0.05). Average values of IOP (P = 0.45) and CD (P = 0.39) were not significantly different between MG, HM, and CG. Average values of HEX were lower, and PGE(2) concentration was increased in the MG and HG in comparison with CG (P < 0.05); however, such parameters did not change significantly between MG and HG (P > 0.05). PGE(2) values did not correlate with IOP, CD, and HEX in any group (P > 0.05). Although there were a small number of dogs studied, our results demonstrated that cataract progression from mature to hypermature did not have a significant change in PGE(2) aqueous concentration, IOP, corneal endothelial cell count, or morphology. In addition, PGE(2) concentration was not correlated with parameters of the corneal endothelium or IOP in dogs with mature or hypermature cataracts.

Low Concentration H2O2/TiO_N in Office Bleaching: A Randomized Clinical Trial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of follicular fluid supplementation during in vitro maturation on total cell number in bovine blastocysts produced in vitro

This study evaluated the influence of follicular fluid (FF) added to the maturation medium on the quality of bovine embryos produced in vitro. In the first experiment, oocytes were matured in media containing five different FF concentrations with different maturation times and classified according to meiotic progression and migration of cortical granules. In the second experiment, oocytes matured in the same media were fertilized at three different maturation times; thereafter, cleavage and blastocyst rates were evaluated. In the third experiment, oocytes were matured in media containing three different FF concentrations at two different maturation times, and embryo quality, inferred by the ratio of inner cell mass and trophectoderm cells compared with total cell number, was evaluated. Higher FF concentration (75 - 100% FF) slowed meiotic progression and CG migration (control - 78.13% vs. treated - 52.58% and control - 52.7% vs. treated - 11.59%, respectively, at 24 h of maturation). Also, FF at concentration of 75% or 100% had a negative influence on cleavage and blastocyst rates (control - 90.13% vs. treated - 82.64% and control - 35.73% vs. treated - 11.57%, respectively, at 24 h of maturation). The 50% FF resulted in embryos with increased inner cell mass numbers (control - 29.91 vs. treated - 35.49, at 24 h of maturation) and total cell numbers (control - 109.53 vs. treated - 120.67, at 26 h of maturation). Even though higher concentration of FF added to the maturation medium reduced embryonic development rates, in lower concentrations, FF slowed the meiotic progression and migration of CG and contributed to increases in inner cell mass number. Thus, FF added to the maturation medium enhances the number of cells in bovine embryos produced in vitro, especially for inner cell mass.

Particle creation in a f(R) theory with cosmological constraints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

MASSLESS PARTICLE CREATION IN A F(R) ACCELERATING UNIVERSE

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Long-range two-particle correlations of strange hadrons with charged particles in pPb and PbPb collisions at LHC energies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

In situ sonochemical synthesis of ZnO particles embedded in a thermoplastic matrix for biomedical applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Induced fractional valley number in graphene with topological defects

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cassava root husks as a sorbent material for the uptake and pre-concentration of cadmium(II) from aqueous media

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Particle emission from heavy-duty engine fuelled with blended diesel and biodiesel

In this study, particulate matter (PM) were characterized from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B3) in the city of Londrina, Brazil. Sixteen priority polycyclic aromatic hydrocarbons (PAH) concentrations were analyzed in the samples by their association with atmospheric PM, mass size distributions and major ions (fluorite, chloride, bromide, nitrate, phosphate, sulfate, nitrite, oxalate; fumarate, formate, succinate and acetate; lithium, sodium, potassium, magnesium, calcium and ammonium). Results indicate that major ions represented 21.2% particulate matter mass. Nitrate, sulfate, and ammonium, respectively, presented the highest concentration levels, indicating that biodiesel may also be a significant source for these ions, especially nitrate. Dibenzo[a,h]anthracene and indeno[1,2,3,-cd]pyrene were the main PAH found, and a higher fraction of PAH particles was found in diameters lower than 0.25 mu m in Londrina bus station. The fine and ultrafine particles were dominant among the PM evaluated, suggesting that biodiesel decreases the total PAH emission. However, it does also increase the fraction of fine and ultrafine particles when compared to diesel.

Anomalous centrality evolution of two-particle angular correlations from Au-Au collisions at root s(NN)=62 and 200 GeV

We present two-dimensional (2D) two-particle angular correlations measured with the STAR detector on relative pseudorapidity eta and azimuth phi for charged particles from Au-Au collisions at root s(NN) = 62 and 200 GeV with transverse momentum p(t) >= 0.15 GeV/c, vertical bar eta vertical bar <= 1, and 2 pi in azimuth. Observed correlations include a same-side (relative azimuth <pi/2) 2D peak, a closely related away-side azimuth dipole, and an azimuth quadrupole conventionally associated with elliptic flow. The same-side 2D peak and away-side dipole are explained by semihard parton scattering and fragmentation (minijets) in proton-proton and peripheral nucleus-nucleus collisions. Those structures follow N-N binary-collision scaling in Au-Au collisions until midcentrality, where a transition to a qualitatively different centrality trend occurs within one 10% centrality bin. Above the transition point the number of same-side and away-side correlated pairs increases rapidly relative to binary-collision scaling, the eta width of the same-side 2D peak also increases rapidly (eta elongation), and the phi width actually decreases significantly. Those centrality trends are in marked contrast with conventional expectations for jet quenching in a dense medium. The observed centrality trends are compared to perturbative QCD predictions computed in HIJING, which serve as a theoretical baseline, and to the expected trends for semihard parton scattering and fragmentation in a thermalized opaque medium predicted by theoretical calculations and phenomenological models. We are unable to reconcile a semihard parton scattering and fragmentation origin for the observed correlation structure and centrality trends with heavy-ion collision scenarios that invoke rapid parton thermalization. If the collision system turns out to be effectively opaque to few-GeV partons the present observations would be inconsistent with the minijet picture discussed here. DOI: 10.1103/PhysRevC.86.064902

Effects of the particle sizes and concentrations on the X-ray absorption by CuO compounds

This work presents a study on the effects of the particle size, material concentration and radiation energy on the X-ray absorption. CuO nanoparticles and microparticles were incorporated separately into a polymeric resin in concentrations of 5%, 10% and 30% relative to the resin mass. X-ray absorption by these materials was analyzed with a CdTe detector. The X-ray absorption is higher for the nanostructured material compared to the microstructured one for low energy X-ray beams for all CuO concentrations. (c) 2011 Elsevier Ltd. All rights reserved.

Measurement of the concentration and size of aerosol particles and identification of the sources in orthopedic surgeries

In this study, the measurement of the concentration and size of particles and the identification of their sources were carried out at five orthopedic surgeries. The aerosol concentration and particle size distribution, ranging from 0.3 mu m 10 mu m, were measured and related to the type of indoor activity. The handling of surgical linen and gowns, handling of the patient, use of electrosurgical apparatus, use of a bone saw, handling of equipment, and cleaning of the room were identified as the most important sources of particles, with each of these activities posing different risks to the health of the patients and workers. The results showed that most of the particles were above 0.5 mu m and that there was a strong correlation among all particles of sizes above 1 mu m. Particles with diameters in the range of 0.3 mu m-0.5 mu m had a good correlation only with particles in the ranges of 0.5 mu m-1.0 mu m and 1.0 mu m-3.0 mu m in three of the surgeries analyzed. Findings led to the conclusion that most of the events responsible for generating aerosol particles in an orthopedic surgery room are brief, intermittent, and highly variable, thus requiring the use of specific instrumentation for their continuous identification and characterization.