Identification of resistance factors to the main wheat diseases in the Mediterranean area

Several diseases challenge bread and durum wheat productions worldwide. The importance of these cereals requires adequate protection to pathogens that can cause strong yield and grain quality losses. The main work of this thesis was related to phenotype GDP (Global Durum Panel) in the Mediterranean region (Italy, Egypt, Lebanon, Morocco and Turkey) and Argentina across three years (2019-2021) for yellow rust resistance (infection type and severity). GWAS shows in particular, loci in chromosome 1B, 2B, 4B, 5A, 6A, 7B showed high significance across nurseries/years, with various patterns of GxE. The second chapter is about Zymoseptoria tritici, agent of STB (Septoria Tritici Blotch), a foliar pathogen that yearly causes high damages if not controlled. In recent years research in durum wheat breeding is focused on the identification of novel, underexploited resistance genes to be subsequently and conveniently moved into the pre-breeding and breeding stream. The plants were phenotyped for disease height characters, infection type at the flag leaf and infection type at the level of the canopy below the flag leaf. This experiment opens up a rich scenario of analysis and opportunities to investigate and discover new loci of resistance to STB. Third chapter is about Fusarium head blight (FHB) is a fungal disease caused by pathogens belonging to the genus Fusarium. In particular, Fusarium culmorum and Fusarium graminearum species cause severe grain yield losses and accumulation of mycotoxins in wheat that compromise food safety. Over 250 QTL/genes for FHB resistance have been identified in bread wheat, such as Fhb 1 and Fhb 5 but only a small number of FHB resistance loci have been mapped in durum wheat. The aim of this work is to find loci of partial resistance to FHB already present in durum and bread wheat germplasm and therefore easily cumulative.

Gwas analysis for the identification of molecular basis responsible for yield related traits and disease resistance in durum wheat

The PhD thesis was developed in the framework of Innovar H2020 project. This project aimed at using genomics, transcriptomics and phenotyping techniques to update varietal registration procedure used in Europe for Value of Cultivation and Use (VCU) and Distinctiness Uniformity and Stability (DUS) protocols. The phenotypic and genotypic diversity of a durum wheat panel were assessed for different agronomic traits, connected with wheat development, disease resistance and spike fertility. A panel of 253 durum wheat varieties was characterized for VCU and DUS traits and genotyped with Illumina 90K SNP Chip array (Wang et al., 2014). GWAS analysis was performed, detecting strong QTLs confirmed also by literature review. Candidate genes were identified for each trait and molecular markers will be developed to be used for marker assisted selection in breeding programs. As for disease resistance, the panel was evaluated for resistance to Soil-Borne-Cereal-Mosaic-Virus (SBCMV). A major QTL, sbm2, was detected on chromosome 2B responsible for durum wheat resistance (Maccaferri et al., 2011). The sbm2 interval was explored by fine mapping on segregant population using KASP markers and by RNASeq analysis, detecting candidate genes involved in plant-pathogen reaction. As regards yield related traits, detailed analysis was performed on the GNI-2A QTL (Milner et al., 2016), responsible for increased number spike fertility. Fine mapping analysis was performed on durum panel identifying hox2 a strong candidate gene, codifying for transcription factor protein. The gene is paralogue of GNI-1 (Sakuma et al., 2019), and it has a 4 kbp deletion responsible for increased number of florets per spikelet. To conclude, the herein reported thesis shows a complete characterization of agronomic and disease resistance traits in modern durum wheat varieties. The results obtained will augment available information for each variety, identifying informative molecular markers for breeding purposes and QTLs/candidate genes responsible for different agronomic traits.

Characterization of an international tetraploid wheat germplasm including landraces and primitive wheat towards improved resilience to abiotic and biotic stresses and quality

This thesis aimed to characterise two large tetraploid germplasm collections. The Global Durum Panel, involving modern cultivars and landrances and the Tetraploid Global Collection which comprises all the tetraploid wheat subgroups. Two distinct parallel studies were carried out. The first is focused on the characterisation of both collection for yield and quality related traits. The panel were phenotyped for two consecutive years each. In this phase the following traits were collected: the number of fertile spikelets per spike, the number of fertile florets of central spikelet for the spike-related traits. The following grain related traits were also phenotyped: the thousand kernel weight, the average grain area, average grain length, average grain width, grain brightness, grain redness, grain yellowness. GWAS analysis were performed for each collected trait and major QTLs were subjected to candidate gene analysis. Major QTLs emerging from GWA study were located on chromosome 2A with a strong bibliographic evidence for grain number-related traits such as the fertile spikelet number, the number of fertile florets per central spikelet. On the other hand two evident peaks were detected on chromosomes 6A and 7B for grain size and weight related traits. The second work was focused on the characterisation of the Global Durum Panel for root system architecture components, namely the root growth angle. GWAS analysis was perfomed and three major QTLs were detected on chromosome 2A, 6A and 7A. These three QTLs all have a bibliographic evidence.

Computational tool for three-point hitch geometry optimization

The weight-transfer effect, consisting of the change in dynamic load distribution between the front and the rear tractor axles, is one of the most impairing phenomena for the performance, comfort, and safety of agricultural operations. Excessive weight transfer from the front to the rear tractor axle can occur during operation or maneuvering of implements connected to the tractor through the three-point hitch (TPH). In this respect, an optimal design of the TPH can ensure better dynamic load distribution and ultimately improve operational performance, comfort, and safety. In this study, a computational design tool (The Optimizer) for the determination of a TPH geometry that minimizes the weight-transfer effect is developed. The Optimizer is based on a constrained minimization algorithm. The objective function to be minimized is related to the tractor front-to-rear axle load transfer during a simulated reference maneuver performed with a reference implement on a reference soil. Simulations are based on a 3-degrees-of-freedom (DOF) dynamic model of the tractor-TPH-implement aggregate. The inertial, elastic, and viscous parameters of the dynamic model were successfully determined through a parameter identification algorithm. The geometry determined by the Optimizer complies with the ISO-730 Standard functional requirements and other design requirements. The interaction between the soil and the implement during the simulated reference maneuver was successfully validated against experimental data. Simulation results show that the adopted reference maneuver is effective in triggering the weight-transfer effect, with the front axle load exhibiting a peak-to-peak value of 27.1 kN during the maneuver. A benchmark test was conducted starting from four geometries of a commercially available TPH. As result, all the configurations were optimized by above 10%. The Optimizer, after 36 iterations, was able to find an optimized TPH geometry which allows to reduce the weight-transfer effect by 14.9%.

Methods and tools to foster territorial approaches for the assessment of food supply chains

The challenges of the current global food systems are often framed around feeding the world's growing population while meeting sustainable development for future generations. Globalization has brought to a fragmentation of food spaces, leading to a flexible and mutable supply chain. This poses a major challenge to food and nutrition security, affecting also rural-urban dynamics in territories. Furthermore, the recent crises have highlighted the vulnerability to shocks and disruptions of the food systems and the eco-system due to the intensive management of natural, human and economic capital. Hence, a sustainable and resilient transition of the food systems is required through a multi-faceted approach that tackles the causes of unsustainability and promotes sustainable practices at all levels of the food system. In this respect, a territorial approach becomes a relevant entry point of analysis for the food system’s multifunctionality and can support the evaluation of sustainability by quantifying impacts associated with quantitative methods and understanding the territorial responsibility of different actors with qualitative ones. Against this background the present research aims to i) investigate the environmental, costing and social indicators suitable for a scoring system able to measure the integrated sustainability performance of food initiatives within the City/Region territorial context; ii) develop a territorial assessment framework to measure sustainability impacts of agricultural systems; and iii) define an integrated methodology to match production and consumption at a territorial level to foster a long-term vision of short food supply chains. From a methodological perspective, the research proposes a mixed quantitative and qualitative research method. The outcomes provide an in-depth view into the environmental and socio-economic impacts of food systems at the territorial level, investigating possible indicators, frameworks, and business strategies to foster their future sustainable development.

Gene expression and genome-wide association studies analysis to select heavy pigs for protected designation of origin cured meats production

The high quality of protected designation of origin (PDO) dry-cured pork products depends largely on the chemical and physical parameters of the fresh meat and their variation during the production process of the final product. The discovery of the mechanisms that regulate the variability of these parameters was aided by the reference genome of swine adjuvant to genetic analysis methods. This thesis can contribute to the discovery of genetic mechanisms that regulate the variability of some quality parameters of fresh meat for PDO dry-cured pork production. The first study is of gene expression and showed that between low and high glycolytic potential (GP) samples of Semimembranosus muscle of Italian Large White (ILW) pigs in early postmortem, the differentially expressed genes were all but one over expressed in low GP. These were involved in ATP biosynthesis processes, calcium homeostasis, and lipid metabolism including the potential master regulator gene Peroxisome Proliferator-Activated Receptor Alpha (PPARA). The second is a study in commercial hybrid pigs to evaluate correlations between carcass and fresh ham traits, including carcass and fresh ham lean meat percentages, the former, a potential predictor of the latter. In addition, a genome-wide association study allowed the identification of chromosome-wide associations with phenotypic traits for 19 SNPs, and genome-wide associations for 14 SNPs for ferrochelatase activity. The latter could be a determinant for color variation in nitrite-free dry-cured ham. The third study showed gene expression differences in the Longissimus thoracis muscle of ILW pigs by feeding diets with extruded linseed (source of polyunsaturated fatty acids) and vitamin E and selenium (diet three) or natural (diet four) antioxidants. The diet three promoted a more rapid and massive immune system response possibly determined by improvement in muscle tissue function, while the diet four promoted oxidative stability and increased the anti-inflammatory potential of muscle tissue.

Influence of cultivar choice, sowing date and abiotic stresses on tocopherol content and composition in Camelina sativa (L.) Crantz

In Europe, the current demand for vegetable oils and the need to find alternative crops for the regions most affected by climate change (i.e., Mediterranean basin) may be a launchpad for camelina [Camelina sativa (L.) Crantz] to be steadily introduced in European cropping systems. Camelina is mainly known for the unique composition of its oil, with a fatty acids profile including more than 50% content of essential linoleic and linolenic fatty acids, and a high tocopherol content. Being tocopherols part of the vitamin E family of antioxidants, the added value of growing camelina in harsh environments could be the enhancement of tocopherol content in camelina oil, thus having a more stable and nutritionally valuable product. With the final purpose of fully valorize camelina as a tolerant, valuable-oil producing crop for the Mediterranean basin, the main aim of this study was to investigate whether and how sowing date, cultivar choice, and abiotic stresses can affect tocopherol content and composition in camelina oil. The results showed that cultivar choice and growing conditions influenced total tocopherol, γ-tocopherol, and α-tocopherol contents. Moreover, heat stress trial revealed that high temperature increased α-tocopherol content, while no effect was observed in total tocopherols and in γ-tocopherol content. Finally, drought increased total tocopherols in camelina, and in drought-sensitive lines an increase in α-tocopherol was observed. This study allowed to acquire awareness on camelina resistance to abiotic stresses, coupled with a better knowledge on tocopherol content and composition in relation to cultivar, sowing date, and abiotic stresses. This will have an impact for the introduction of camelina as an alternative crop in harsher environments, such as the Mediterranean basin, to produce an oil suitable for food, feed, and industrial applications.

Bio-preservation and bio-active compounds as sustainable strategies to improve quality and safety of fresh and fermented products

The development of new “green” and sustainable approaches to reduce food wastes, guaranteeing food quality, microbiological safety and the environmental sustainability, is of great interest for food industry. This PhD thesis, as part of the European project BioProMedFood (PRIMA–Section2 Programme), was focused on two strategies: the use of natural antimicrobials and the application of microbial strains isolated from spontaneously fermented products. The first part concerned the valorisation of microbial biodiversity of 15 Mediterranean spontaneously fermented sausages, through the isolation of autochthonous lactic acid bacteria (LAB) strains, mainly Latilactobacillus sakei, that were characterised regarding their safety and technological aspects. The most promising strains were tested as bio-protective cultures in fresh sausages, showing promising anti-listerial activity, or as starter cultures in fermented sausages. The second part of the research was focused on the use of natural compounds (phenolic extracts and essential oils from Juniperus oxycedrus needles and Rubus fruticosus leaves) with antimicrobial potential. They were tested in vitro against List. monocytogenes and Enterococcus faecium, showing differences in relation to species and type of extracts, but they hint at important possibilities for applications in specific foods. Concluding, this PhD thesis highlighted the great potential of traditional meat products as an isolation source of new strains with industrial importance. Moreover, the antimicrobial potential of compounds obtained from plant matrices opened promising perspectives to exploit them as “green” strategies to increase fresh food safety. The last topic of research, carry out in collaboration with Department of Nutrition and Food Sciences (University of Granada), investigated the effect of LAB fermentation on avocado leaves by-products, focusing on the bio-availability of phenolic compounds in the plant extracts, caused by microbial metabolism.

Different dietary fibres included in the gestation and lactation diet shape sow's microbiota, modify colostrum and milk composition and affect piglet growth and health

This thesis reports three experimental studies that may contribute to understand how the sources or types of dietary fibres (DFs) included in sow diet with similar level of total DFs influence the composition of colostrum and milk and their related effects on offspring performance and gut microbiota. The first study showed that decreasing the level of hemicelluloses (HCs) in sow’s lactation diet increased the proportion of butyrate and the concentration of volatile fatty acids (VFAs), copper and threonine in milk. Simultaneously, the post-weaning growth of low birthweight piglets was improved, and the diarrhoea occurrence was reduced during the second week post-weaning. The second study showed that the level of HCs in the diet of lactating sows affected their faecal microbiota, modified the VFA profile in sow’s faeces during lactation and barely impacted the faecal microbiota of slow and fast growing piglets. The third study showed that replacing a source soluble DFs by one of insoluble DFs in sow’s diet during late gestation and lactation reduced farrowing duration, increased total VFAs and lactoferrin concentrations in colostrum, improved growth performance from birth to 1 day of lactation, during the post-weaning period and throughout the study, and reduced diarrhoea occurrence during the first week post-weaning. Finally, a fourth study proposed a workflow to analyse low biomass samples from the umbilical cord blood aiming at investigating the existence of a pre-birth microbiota with no substantial findings to confirm this hypothesis. Overall, the results of these studies confirmed that, besides the level of DFs, the sources, and the types of DFs included in the sow's diet shape the sow's microbiota, influence the composition of colostrum and milk, and improve offspring performance, but with limited impacts on the microbiota of piglets.

Growth performance, gut health, and metabolism of broilers under thermoneutral and heat stress conditions: multidisciplinary studies on the effects of nutritional strategies and genotype

This PhD project aimed to (i) investigate the effects of three nutritional strategies (supplementation of a synbiotic, a muramidase, or arginine) on growth performance, gut health, and metabolism of broilers fed without antibiotics under thermoneutral and heat stress conditions and to (ii) explore the impacts of heat stress on hypothalamic regulation of feed intake in three broiler lines from diverse stages of genetic selection and in the red jungle fowl, the ancestor of domestic chickens. Synbiotic improved feed efficiency and footpad health, increased Firmicutes and reduced Bacteroidetes in the ceca of birds kept in thermoneutral conditions, while did not mitigate the impacts of heat stress on growth performance. Under optimal thermal conditions, muramidase increased final body weight and reduced cumulative feed intake and feed conversion ratio in a dose-dependent way. The highest dose reduced the risk of footpad lesions, cecal alpha diversity, the Firmicutes to Bacteroidetes ratio, and butyrate producers, increased Bacteroidaceae and Lactobacillaceae, plasmatic levels of bioenergetic metabolites, and reduced the levels of pro-oxidant metabolites. The same dose, however, failed to reduce the effects of heat stress on growth performance. Arginine supplementation improved growth rate, final body weight, and feed efficiency, increased plasmatic levels of arginine and creatine and hepatic levels of creatine and essential amino acids, reduced alpha diversity, Firmicutes, and Proteobacteria (especially Escherichia coli), and increased Bacteroidetes and Lactobacillus salivarius in the ceca of thermoneutral birds. No arginine-mediated attenuation of heat stress was found. Heat stress altered protein metabolism and caused the accumulation of antioxidant and protective molecules in oxidative stress-sensitive tissues. Arginine supplementation, however, may have partially counterbalanced the effects of heat stress on energy homeostasis. Stable gene expression of (an)orexigenic neuropeptides was found in the four chicken populations studied, but responses to hypoxia and heat stress appeared to be related to feed intake regulation.

Advancing of risk assessment of pesticides on insect pollinators: beyond honey bees (Apis mellifera L.)

The western honey bee, Apis mellifera L., is currently the model specie for pesticide risk assessment on pollinators with the assumption that the worst-case scenarios for this species are sufficiently conservative to protect other insect pollinators. However, recent studies have showed that wild species may be more sensitive to plant protection products, due to differences in biology and life cycles. Therefore, there is the need to extend the risk assessment within a more ecological approach, in order to ensure that there are no irreversible effects on non-target organisms and in the environment. My dissertation aims to expand the risk assessment to other insect pollinators (including wild and managed pollinators), in order to cover some of the gaps of the current schemes. In this thesis, it is presented three experiments that cover the early stages of a solitary bee (chapter 1), the development of molecular tools for early detection of sub-lethal effects (chapter 2) and the development of protocols to access lethal and sub-lethal effects on other pollinator taxa (Diptera; chapter 3).

An approach to digitalise activities of combine harvesters through CANBUS

The increase in the efficiency of agricultural machinery is a theme that attracted the attention and investments of the industrial and research community. In addition, in a global market, where the prices of agricultural commodities are so volatile and the prices of the inputs increase, farmers and agricultural contractors struggle to obtain at the end of the agricultural season a consolidated profit. For these reasons, it is important to carefully plan the usage of combine harvesters, to reduce the unproductive time and the input usage such as the fuel, that at the end of the harvesting season could increase costs. This study aims to develop an algorithm able to automatically identify and evaluate the time spent by the combines in each of the identified activities, identify the field boundaries of the harvested fields and perform a performance evaluation. To be able to develop the algorithm, during the harvesting seasons of 2020 and 2022, two combine harvesters operating in real-world conditions in Bologna’s Province were monitored. The data necessary to perform the analysis were acquired as CANBUS data and processed by using the MATLAB ® suite. The results obtained from this analysis show that the monitored combines have spent over 60% of the time performing harvesting activities, 13% of the time idling at the field, 10% performing headland turn, the 3% and 4% of the time respectively in transport on the field and road and 2% of the time in unloading. In addition, the performance of the monitored combines resulted similarly to the performance reported in other studies.

Identification of sunflower genotypes suitable for organic agriculture and development of analytical tools for their traceability

Thanks to the development and combination of molecular markers for the genetic traceability of sunflower varieties and a gas chromatographic method for the determination of the FAs composition of sunflower oil, it was possible to implement an experimental method for the verification of both the traceability and the variety of organic sunflower marketed by Agricola Grains S.p.A. The experimental activity focused on two objectives: the implementation of molecular markers for the routine control of raw material deliveries for oil extraction and the improvement and validation of a gas chromatographic method for the determination of the FAs composition of sunflower oil. With regard to variety verification and traceability, the marker systems evaluated were the following: SSR markers (12) arranged in two multiplex sets and SCAR markers for the verification of cytoplasmic male sterility (Pet1) and fertility. In addition, two objectives were pursued in order to enable a routine application in the industrial field: the development of a suitable protocol for DNA extraction from single seeds and the implementation of a semi-automatic capillary electrophoresis system for the analysis of marker fragments. The development and validation of a new GC/FID analytical method for the determination of fatty acids (FAME) in sunflower achenes to improve the quality and efficiency of the analytical flow in the control of raw and refined materials entering the Agricola Grains S.p.A. production chain. The analytical performances being validated by the newly implemented method are: linearity of response, limit of quantification, specificity, precision, intra-laboratory precision, robustness, BIAS. These parameters are used to compare the newly developed method with the one considered as reference - Commission Regulation No. 2568/91 and Commission Implementing Regulation No. 2015/1833. Using the combination of the analytical methods mentioned above, the documentary traceability of the product can be confirmed experimentally, providing relevant information for subsequent marketing.

Understanding food waste through behavioural theories in different settings

SDG 12.3 aims to promote sustainable consumption and production patterns by addressing the global food loss and waste problem. Given the multiple interrelated impacts, food waste is recognized as one of the major food system challenges. The scope of this work is to contribute to the understanding on food waste generation and potential approaches to tackle it. This work was specifically designed to achieve the following goals: 1) Understand specific factors that affect individual behaviours to generate FW at household, 2) Analyse the effective ways to reduce FW through behaviour change perspective given the catering and hospitality sector, and 3) Provide an evidence synthesis on intervention study that incorporate stakeholder insights focus on school meals. The first goal of identifying food waste drivers was achieved by the systematically reviewing on peer-reviewed and grey literature. The Motivation-Opportunity-Ability (MOA) framework was applied to frame consumer behavioural drivers and identify levers that could be potentially utilized to reduce food waste. Consumer segmentation was further discussed to provide insights for developing tailored food waste reduction interventions. The second goal required the identification on practical interventions, which has been accomplished by systematic literature review basing on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The efficiency and working mechanism of interventions were evaluated basing on the combination of MOA and behavioural change wheel. Building on the evidence of effective interventions, a roadmap was developed for policymakers and practitioners to lead their own pathway on intervention study and upscaling. The third aim has been achieved with a school meals interventions mapping and the implementation of stakeholder workshops. The method was built on the literature review and then enriched by intervention co-design dialogue among stakeholders. The overall conclusion addressed challenges of food waste determents identification, tailored reduction interventions developing, sustainable consumption promotion with school meals.

Red flesh fruit in european pear (Pyrus communis): genetic sources, QTLs, candidate genes and tools for breeding

Red flesh fruit is a character which interest is increasing in several commercial species. Following a review of the research on the biosynthesis and accumulation of anthocyanin in pears (Chapter 1) the general aim of the project is reported in Chapter 2. Chapter 3 reports the results of a molecular analysis of 33 red-fleshed pear accessions, genotyped with 18 SSR markers with the aim of improving germplasm conservation strategies to support ongoing breeding programs. The molecular profiles revealed both cases of synonymy and homonymy and 6 unique genotypes were identified. The S-allele were established to highlight the genetic relationships among these landraces. Four of the unique genotypes have been clustered based on pomological data. In the Chapter 4, the work was directed to identify the putative genomic regions involved in the appearance of this character in pear fruit. A crossing population (‘Carmen’ x ‘Cocomerina Precoce’) segregating for the trait was phenotyped for 2 consecutive years and used for QTL analysis. A strong QTL was identified in a small genomic region related to the red flesh fruit trait at 27 Mb from the start of LG5. Two candidate genes were detected in this genomic region: ‘PcMYB114’ and ‘PcABCC2’. SSR marker SSR114 was found able to detect the red flesh phenotype segregation in all the red-fleshed pear accessions and segregating progenies tested. Chapter 5 focuses on examining the trend of anthocyanin synthesis and accumulation during the fruit development, from fruit set to ripening time. Three different trials were planned: qPCR and HPLC methods were performed to correlate the genes expression with the anthocyanin accumulation in ‘Cocomerina Precoce’ and six progenies. Total transcriptome sequencing was used to compare the differential genes expression between red and white-fleshed fruit. Chapter 6 reviews and analyses all the earlier study findings while providing new potential future perspectives.