I. Rigid body penetration into brittle materials. II. Phase change effect on shock wave propagation

Part I.

We have developed a technique for measuring the depth time history of rigid body penetration into brittle materials (hard rocks and concretes) under a deceleration of ~ 10⁵ g. The technique includes bar-coded projectile, sabot-projectile separation, detection and recording systems. Because the technique can give very dense data on penetration depth time history, penetration velocity can be deduced. Error analysis shows that the technique has a small intrinsic error of ~ 3-4 % in time during penetration, and 0.3 to 0.7 mm in penetration depth. A series of 4140 steel projectile penetration into G-mixture mortar targets have been conducted using the Caltech 40 mm gas/ powder gun in the velocity range of 100 to 500 m/s.

We report, for the first time, the whole depth-time history of rigid body penetration into brittle materials (the G-mixture mortar) under 10⁵ g deceleration. Based on the experimental results, including penetration depth time history, damage of recovered target and projectile materials and theoretical analysis, we find:

1. Target materials are damaged via compacting in the region in front of a projectile and via brittle radial and lateral crack propagation in the region surrounding the penetration path. The results suggest that expected cracks in front of penetrators may be stopped by a comminuted region that is induced by wave propagation. Aggregate erosion on the projectile lateral surface is < 20% of the final penetration depth. This result suggests that the effect of lateral friction on the penetration process can be ignored.

2. Final penetration depth, P_max, is linearly scaled with initial projectile energy per unit cross-section area, e_s , when targets are intact after impact. Based on the experimental data on the mortar targets, the relation is P_max(mm) 1.15e_s (J/mm² ) + 16.39.

3. Estimation of the energy needed to create an unit penetration volume suggests that the average pressure acting on the target material during penetration is ~ 10 to 20 times higher than the unconfined strength of target materials under quasi-static loading, and 3 to 4 times higher than the possible highest pressure due to friction and material strength and its rate dependence. In addition, the experimental data show that the interaction between cracks and the target free surface significantly affects the penetration process.

4. Based on the fact that the penetration duration, t_max, increases slowly with e_s and does not depend on projectile radius approximately, the dependence of t_max on projectile length is suggested to be described by t_max(μs) = 2.08e_s (J/mm² + 349.0 x m/(πR²), in which m is the projectile mass in grams and R is the projectile radius in mm. The prediction from this relation is in reasonable agreement with the experimental data for different projectile lengths.

5. Deduced penetration velocity time histories suggest that whole penetration history is divided into three stages: (1) An initial stage in which the projectile velocity change is small due to very small contact area between the projectile and target materials; (2) A steady penetration stage in which projectile velocity continues to decrease smoothly; (3) A penetration stop stage in which projectile deceleration jumps up when velocities are close to a critical value of ~ 35 m/s.

6. Deduced averaged deceleration, a, in the steady penetration stage for projectiles with same dimensions is found to be a(g) = 192.4v + 1.89 x 10⁴, where v is initial projectile velocity in m/s. The average pressure acting on target materials during penetration is estimated to be very comparable to shock wave pressure.

7. A similarity of penetration process is found to be described by a relation between normalized penetration depth, P/P_max, and normalized penetration time, t/t_max, as P/P_max = f(t/t_max, where f is a function of t/t_max. After f(t/t_max is determined using experimental data for projectiles with 150 mm length, the penetration depth time history for projectiles with 100 mm length predicted by this relation is in good agreement with experimental data. This similarity also predicts that average deceleration increases with decreasing projectile length, that is verified by the experimental data.

8. Based on the penetration process analysis and the present data, a first principle model for rigid body penetration is suggested. The model incorporates the models for contact area between projectile and target materials, friction coefficient, penetration stop criterion, and normal stress on the projectile surface. The most important assumptions used in the model are: (1) The penetration process can be treated as a series of impact events, therefore, pressure normal to projectile surface is estimated using the Hugoniot relation of target material; (2) The necessary condition for penetration is that the pressure acting on target materials is not lower than the Hugoniot elastic limit; (3) The friction force on projectile lateral surface can be ignored due to cavitation during penetration. All the parameters involved in the model are determined based on independent experimental data. The penetration depth time histories predicted from the model are in good agreement with the experimental data.

9. Based on planar impact and previous quasi-static experimental data, the strain rate dependence of the mortar compressive strength is described by σ_f/σ⁰_f = exp(0.0905(log(έ/έ_0) ^1.14, in the strain rate range of 10^-7/s to 10³/s (σ⁰_f and έ are reference compressive strength and strain rate, respectively). The non-dispersive Hugoniot elastic wave in the G-mixture has an amplitude of ~ 0.14 GPa and a velocity of ~ 4.3 km/s.

Part II.

Stress wave profiles in vitreous GeO₂ were measured using piezoresistance gauges in the pressure range of 5 to 18 GPa under planar plate and spherical projectile impact. Experimental data show that the response of vitreous GeO₂ to planar shock loading can be divided into three stages: (1) A ramp elastic precursor has peak amplitude of 4 GPa and peak particle velocity of 333 m/s. Wave velocity decreases from initial longitudinal elastic wave velocity of 3.5 km/s to 2.9 km/s at 4 GPa; (2) A ramp wave with amplitude of 2.11 GPa follows the precursor when peak loading pressure is 8.4 GPa. Wave velocity drops to the value below bulk wave velocity in this stage; (3) A shock wave achieving final shock state forms when peak pressure is > 6 GPa. The Hugoniot relation is D = 0.917 + 1.711u (km/s) using present data and the data of Jackson and Ahrens [1979] when shock wave pressure is between 6 and 40 GPa for ρ₀ = 3.655 gj cm³ . Based on the present data, the phase change from 4-fold to 6-fold coordination of Ge⁺⁴ with O^-2 in vitreous GeO₂ occurs in the pressure range of 4 to 15 ± 1 GPa under planar shock loading. Comparison of the shock loading data for fused SiO₂ to that on vitreous GeO₂ demonstrates that transformation to the rutile structure in both media are similar. The Hugoniots of vitreous GeO₂ and fused SiO₂ are found to coincide approximately if pressure in fused SiO₂ is scaled by the ratio of fused SiO₂to vitreous GeO₂ density. This result, as well as the same structure, provides the basis for considering vitreous Ge0₂ as an analogous material to fused SiO₂ under shock loading. Experimental results from the spherical projectile impact demonstrate: (1) The supported elastic shock in fused SiO₂ decays less rapidly than a linear elastic wave when elastic wave stress amplitude is higher than 4 GPa. The supported elastic shock in vitreous GeO₂ decays faster than a linear elastic wave; (2) In vitreous GeO₂ , unsupported shock waves decays with peak pressure in the phase transition range (4-15 GPa) with propagation distance, x, as α 1/x^-3.35 , close to the prediction of Chen et al. [1998]. Based on a simple analysis on spherical wave propagation, we find that the different decay rates of a spherical elastic wave in fused SiO₂ and vitreous GeO₂ is predictable on the base of the compressibility variation with stress under one-dimensional strain condition in the two materials.

Two-body photodisintegration of the deuteron at intermediate energy

We have measured the differential cross section for two-body deuteron photodisintegration at center-of-mass angles of 90°, 53° and 37° with photon energies from 1.6 Ge V to 2.8 Ge V. Additional data were taken at θ* = 37° and E_γ = 4.2 GeV. Invariant cross sections at θ* =90° and 53° appear to follow a simple scaling law predicted by constituent counting rules of perturbative QCD, while the cross section at θ* = 37° shows a slower fall-off with photon energy. Angular distributions show increasing forward peaking at higher energies. Agreement with various theoretical predictions based on pQCD and meson-exchange models is discussed.

Conditional independence in quantum many-body systems

In this thesis, I will discuss how information-theoretic arguments can be used to produce sharp bounds in the studies of quantum many-body systems. The main advantage of this approach, as opposed to the conventional field-theoretic argument, is that it depends very little on the precise form of the Hamiltonian. The main idea behind this thesis lies on a number of results concerning the structure of quantum states that are conditionally independent. Depending on the application, some of these statements are generalized to quantum states that are approximately conditionally independent. These structures can be readily used in the studies of gapped quantum many-body systems, especially for the ones in two spatial dimensions. A number of rigorous results are derived, including (i) a universal upper bound for a maximal number of topologically protected states that is expressed in terms of the topological entanglement entropy, (ii) a first-order perturbation bound for the topological entanglement entropy that decays superpolynomially with the size of the subsystem, and (iii) a correlation bound between an arbitrary local operator and a topological operator constructed from a set of local reduced density matrices. I also introduce exactly solvable models supported on a three-dimensional lattice that can be used as a reliable quantum memory.

The interplay of localization and interactions in quantum many-body systems

Disorder and interactions both play crucial roles in quantum transport. Decades ago, Mott showed that electron-electron interactions can lead to insulating behavior in materials that conventional band theory predicts to be conducting. Soon thereafter, Anderson demonstrated that disorder can localize a quantum particle through the wave interference phenomenon of Anderson localization. Although interactions and disorder both separately induce insulating behavior, the interplay of these two ingredients is subtle and often leads to surprising behavior at the periphery of our current understanding. Modern experiments probe these phenomena in a variety of contexts (e.g. disordered superconductors, cold atoms, photonic waveguides, etc.); thus, theoretical and numerical advancements are urgently needed. In this thesis, we report progress on understanding two contexts in which the interplay of disorder and interactions is especially important.

The first is the so-called “dirty” or random boson problem. In the past decade, a strong-disorder renormalization group (SDRG) treatment by Altman, Kafri, Polkovnikov, and Refael has raised the possibility of a new unstable fixed point governing the superfluid-insulator transition in the one-dimensional dirty boson problem. This new critical behavior may take over from the weak-disorder criticality of Giamarchi and Schulz when disorder is sufficiently strong. We analytically determine the scaling of the superfluid susceptibility at the strong-disorder fixed point and connect our analysis to recent Monte Carlo simulations by Hrahsheh and Vojta. We then shift our attention to two dimensions and use a numerical implementation of the SDRG to locate the fixed point governing the superfluid-insulator transition there. We identify several universal properties of this transition, which are fully independent of the microscopic features of the disorder.

The second focus of this thesis is the interplay of localization and interactions in systems with high energy density (i.e., far from the usual low energy limit of condensed matter physics). Recent theoretical and numerical work indicates that localization can survive in this regime, provided that interactions are sufficiently weak. Stronger interactions can destroy localization, leading to a so-called many-body localization transition. This dynamical phase transition is relevant to questions of thermalization in isolated quantum systems: it separates a many-body localized phase, in which localization prevents transport and thermalization, from a conducting (“ergodic”) phase in which the usual assumptions of quantum statistical mechanics hold. Here, we present evidence that many-body localization also occurs in quasiperiodic systems that lack true disorder.

Prevalence and magnitude of body weight and image dissatisfaction among women in dietetics majors

[EN] Some authors have suggested that body weight dissatisfaction may be high in students majoring in dietetics. Therefore, this study was conducted to examine the extent of body weight and image dissatisfaction in a sample of women in dietetics major. Additionally, predictors of magnitude of body weight dissatisfaction were analyzed. Participants were 62 volunteers with normalweight whose mean age was 21.87±1.89 years old (nonrandom sample). The assessment instruments included anthropometric measurements, a somatomorphic matrix test and an eating disorders inventory (EDI-2). Data were analyzed using SPSS vs. 15.0. A larger proportion of students chose an ideal body weight lower than actual weight (67.7%) and body image with less body fat and more muscle mass than actual values (56.4%). The magnitude of body weight dissatisfaction was associated with muscle mass and body fat dissatisfaction, and with the subscale of EDI-2 “body dissatisfaction”. So, from a public health standpoint, we consider important to continue working in this line of research with the aim of better understanding the extent of body weight dissatisfaction in women dietitians, and how this dissatisfaction could interfere with their professional practice.

Slender-body hypervelocity boundary-layer instability

With novel application of optical techniques, the slender-body hypervelocity boundary-layer instability is characterized in the previously unexplored regime where thermo-chemical effects are important. Narrowband disturbances (500-3000~kHz) are measured in boundary layers with edge velocities of up to 5~km/s at two points along the generator of a 5 degree half angle cone. Experimental amplification factor spectra are presented. Linear stability and PSE analysis is performed, with fair prediction of the frequency content of the disturbances; however, the analysis over-predicts the amplification of disturbances. The results of this work have two key implications: 1) the acoustic instability is present and may be studied in a large-scale hypervelocity reflected-shock tunnel, and 2) the new data set provides a new basis on which the instability can be studied.

The head-body weight and head-body length relationship of Synodontis schall (Bloch and Schneider 1801) in Asa Lake, Ilorin, Nigeria

A total of 710 specimens of Synodontis schall were analyzed for the head body weight and head body length relationship. The head constituted 40% of the total body weight and 30% of the total body length. The mean head weight for male and female computed was 23.90g and 29.13g respectively. Head weight in both male and female was significantly different (P<0.01) while the head length for the combined sexes showed no significant difference (P>0.05). Fat accumulation in the body tissue was prominent in the females than males usually before the breeding season. The significance of the cephalo-nuchal shield in the bony head of Synodontis species compared with some other catfishes in the lake was also discussed

Evaluation of the body burdens of heavy metals in five commercially important fishes from different locations in Kainji Lake

The level and distribution of some heavy metals viz Cadmium, Lead, Copper Zinc, and Cobalt in five commercially important fishes, water and sediments at three different locations in Kainj Lake were determined using standard methods. The results show that the ranges of heavy metals mu g/g in fishes in Dam site Laotian are: Cd (0.05~c0.01-20~c01), (Pb(ND-1.12 plus or minus )1), Cu (0.81~c25-2.93~c06), Zn (20.89 arrow right .15-36.78~c2.97), Co(0.08~c01-0.27~c02); in cover Dam, the ranges are Cd (0.04~c02-0.16~c0.2), Pb (nd-02~c01), Cu(0.75~c05-2.61~c13), Zn(15.70~c1.55-32.23~c2.70), Co(0.04~c02-0.25~c0.01) and in Yuna they are Cd (0.05~c01-0.14~c02), Pb (nd-0.32~c01), Cu (0.23~c07-2.70~c05), Zn(15.50 plus or minus `.35-25.62~c2.47), Co(0.07~c02-23~c0.01). The metals concentration (mg/l) in the water sample from Dam site, cover dam and Yuna respectively are Cd(0.007~c001,. 004~c001 and 0.005~001), Pb(013~c001, ND and ND), Cu(.055~c008.030~c007, 05 plus or minus .010), Zn(0.13~c01, 0.060 plus or minus .0055) and Co (.026 plus or minus .022 plus or minus .004, .024 plus or minus .004), while the metals concentration ( mu g/g) in sediments sample from Dam site, cover dam and Yuna are respectively Cd(.05 plus or minus .01, .02 plus or minus .01), Pb(16.00~c1.00, ND and 9.33~c1.01), Cu(24.00~c1.34, 4.26 plus or minus .91 and 11.08~c1.32), Zn(42.00~c1.00, 35~c10 and 38.00 plus or minus .45), Co(15.00~c1.17, 8.69~c1.21 and 10.91~c44). The concentrations of the tested heavy metals are within the acceptable standards of WHO (1987a)

Body image and body composition: comparisons of young male elite soccer players and controls

[EN] The purpose of this study was to evaluate body composition and body image (perception and satisfaction) in a group of young elite soccer players and to compare the data with those of a control group (age and BMI matched). Participants were 56 volunteer males whose mean age and BMI were 19.6 (SD 1.3) years and 23.3 (SD 1.1) kg/m2, respectively. Results showed that soccer players have a higher lean mass and lower fat mass than controls. Moreover, body perception (difference between current and actual image) was more accurate in controls than in soccer players, and the results suggest a tendency for soccer players to aspire to have more muscle mass and body fat. Soccer players perceived an ideal image with significantly higher body-fat percentage than their current and actual images. There were no body-dissatisfaction differences between groups, however. Although the results are necessarily limited by the small sample size, the findings should be of interest to coaches of young elite soccer teams.

Solar System Small-Body Demographics with the Palomar Transient Factory Survey

Observational studies of our solar system's small-body populations (asteroids and comets) offer insight into the history of our planetary system, as these minor planets represent the left-over building blocks from its formation. The Palomar Transient Factory (PTF) survey began in 2009 as the latest wide-field sky-survey program to be conducted on the 1.2-meter Samuel Oschin telescope at Palomar Observatory. Though its main science program has been the discovery of high-energy extragalactic sources (such as supernovae), during its first five years PTF has collected nearly five million observations of over half a million unique solar system small bodies. This thesis begins to analyze this vast data set to address key population-level science topics, including: the detection rates of rare main-belt comets and small near-Earth asteroids, the spin and shape properties of asteroids as inferred from their lightcurves, the applicability of this visible light data to the interpretation of ultraviolet asteroid observations, and a comparison of the physical properties of main-belt and Jovian Trojan asteroids. Future sky-surveys would benefit from application of the analytical techniques presented herein, which include novel modeling methods and unique applications of machine-learning classification. The PTF asteroid small-body data produced in the course of this thesis work should remain a fertile source of solar system science and discovery for years to come.

Eggs, Larvae and Young of The Striped Bass, Roccus saxatilis

Detailed descriptions of the early development of the striped bass, Roccus saxitilis (Walbaum), with emphasis on variation in size and morphology, sequence of fin formation, changes in body form, and attainment of the full complement of maristic numbers, are presented and illustrated for the first time. The egg is spherical, transparent, non-adhesive and relatively large. It is pelagic and buoyant, although it sinks in quiet fresh water. When unfertilized, it averages 1.3 mm, in diameter, but is 3.4 mm. when fertilized and water-hardened. The granular yolk sac, green when alive and whitish-yellow when preserved, averages 1.2 mm., and the single amber-colored oil globule is about 0.6 mm. in diameter. Newly hatched striped bass prolarvae, which range from 2.9-3.7 mm. in total length, are relatively undeveloped and nearly transparent, with no mouth opening, unpigmented eyes, and a greatly enlarged yolk sac with the large oil globule projecting beyond the head. When 5-6 mm. long the yolk sac and oil globule are assimilated and the postlarvae I show advanced development of the internal anatomy. Although the fish is still transparent, scattered melanophores are found on the head and body and chromatophores in the eyes and the ventro-posterior edge of the body. Postlarvae transform to young between 7 and 10 mm. in length when the finfolds are lost except in the dorsal, anal and caudal regions. The largest fish in this group possess a well-formed skeleton with a full complement of 25 vertebrae. Between 10 and 20 mm. in length all fish are fully transformed, muscular tissue renders most of the internal structure obscure, and the myotomes, which generally correspond in number with the vertebrae, are no longer visible. At fish lengths of 20-30 mm. scales are found on all specimens, and with the exception of the pectoral fin-rays, a full complement of meristic structures is present in all other fins. At this stage the body is pigmented uniformly with small spots. Linear regressions between several dependent variables and the , independent variable of standard length indicate that the rate of development of head, eye. and snout to anus lengths is proportional to the length of the larvae and young. Body depth and standard length are non-linear among newly-hatched larvae. Hatchery-reared striped bass demonstrated a slow rate of growth, and were regarded as "stunted," when compared to growth rates observed in another study and field collections. Observations were also made on abnormal eggs and teratological larvae and young. Blue-sac disease is tentatively identified and described for the first time in larvae and pugnosed larvae and young are also described for the first time in striped bass.

Everybody Farts: Celebrating the Body and Refuting Medical Paternalism in Joyce's Ulysses

James Joyce’s Ulysses celebrates all facets of daily life in its refusal to censor raw human emotions and emissions. He adopts a critically medical perspective to portray this honest, unfiltered narrative. In doing so, he reveals the ineffectiveness of the physician-patient relationship due to doctors’ paternalistic attitudes that hinder nonjudgmental, open listening of this unfiltered narrative. His exploration of the doctor’s moral scrutiny, cultural prejudices, and authoritative estrangement from the patient underscore the importance in remembering that physicians and patients alike are ultimately just fellow human beings. Wryly, he drives this point to literal nausea, as his narrative proudly asserts the revulsive details of public health, digestion, and death. In his gritty ruminations on the human body’s material reality, Joyce mocks the physician’s highbrow paternalism by forcing him to identify with the farting, vomiting, decaying bodies around him. In celebrating the uncensored human narrative, Joyce challenges physician and patient alike to openly listen to the stories of others.

An investigation of the three-body reaction He^3(He^3, 2p)He^4

Reactions produced by the He³ bombardment of the He³ have been investigated for bombarding energies from 1 to 20 MeV using a tandem Van de Graaff accelerator. Proton spectra from the three-body reaction He³(He³, 2p)He⁴ have been measured with a counter telescope at 13 angles for 9 bombarding energies between 3 and 18 MeV. The results are compared with a model for the reaction which includes a strong p-He⁴ final-state interaction. Alpha-particle spectra have been obtained at 12 and 18 MeV for forward angles with a magnetic spectrometer. These spectra indicate a strongly forward-peaked mechanism involving the ¹S₀ p-p interaction in addition to the p-He⁴ interaction. Measurements of p-He⁴ and p-p coincidence spectra at 10 MeV confirm these features of the reaction mechanism. Deuteron spectra from the reaction of He³(He³, d)pHe³ have been measured at 18 MeV. A triton spectrum from the reaction He³(He³, t)3p at 20 MeV and 4⁰ is interpreted in terms of a sequential decay through an excited state of the alpha particle at 20.0 MeV. No effects are observed which would indicate an interaction in the residual (3p) system. Below 3 MeV the He³(He³, 2p)He⁴ reaction mechanism is observed to be changing and further measurements are suggested in view of the importance of this reaction in stellar interiors.