Electricity markets modeling considering complex contracts and aggregators

All over the world, the liberalization of electricity markets, which follows different paradigms, has created new challenges for those involved in this sector. In order to respond to these challenges, electric power systems suffered a significant restructuring in its mode of operation and planning. This restructuring resulted in a considerable increase of the electric sector competitiveness. Particularly, the Ancillary Services (AS) market has been target of constant renovations in its operation mode as it is a targeted market for the trading of services, which have as main objective to ensure the operation of electric power systems with appropriate levels of stability, safety, quality, equity and competitiveness. In this way, with the increasing penetration of distributed energy resources including distributed generation, demand response, storage units and electric vehicles, it is essential to develop new smarter and hierarchical methods of operation of electric power systems. As these resources are mostly connected to the distribution network, it is important to consider the introduction of this kind of resources in AS delivery in order to achieve greater reliability and cost efficiency of electrical power systems operation. The main contribution of this work is the design and development of mechanisms and methodologies of AS market and for energy and AS joint market, considering different management entities of transmission and distribution networks. Several models developed in this work consider the most common AS in the liberalized market environment: Regulation Down; Regulation Up; Spinning Reserve and Non-Spinning Reserve. The presented models consider different rules and ways of operation, such as the division of market by network areas, which allows the congestion management of interconnections between areas; or the ancillary service cascading process, which allows the replacement of AS of superior quality by lower quality of AS, ensuring a better economic performance of the market. A major contribution of this work is the development an innovative methodology of market clearing process to be used in the energy and AS joint market, able to ensure viable and feasible solutions in markets, where there are technical constraints in the transmission network involving its division into areas or regions. The proposed method is based on the determination of Bialek topological factors and considers the contribution of the dispatch for all services of increase of generation (energy, Regulation Up, Spinning and Non-Spinning reserves) in network congestion. The use of Bialek factors in each iteration of the proposed methodology allows limiting the bids in the market while ensuring that the solution is feasible in any context of system operation. Another important contribution of this work is the model of the contribution of distributed energy resources in the ancillary services. In this way, a Virtual Power Player (VPP) is considered in order to aggregate, manage and interact with distributed energy resources. The VPP manages all the agents aggregated, being able to supply AS to the system operator, with the main purpose of participation in electricity market. In order to ensure their participation in the AS, the VPP should have a set of contracts with the agents that include a set of diversified and adapted rules to each kind of distributed resource. All methodologies developed and implemented in this work have been integrated into the MASCEM simulator, which is a simulator based on a multi-agent system that allows to study complex operation of electricity markets. In this way, the developed methodologies allow the simulator to cover more operation contexts of the present and future of the electricity market. In this way, this dissertation offers a huge contribution to the AS market simulation, based on models and mechanisms currently used in several real markets, as well as the introduction of innovative methodologies of market clearing process on the energy and AS joint market. This dissertation presents five case studies; each one consists of multiple scenarios. The first case study illustrates the application of AS market simulation considering several bids of market players. The energy and ancillary services joint market simulation is exposed in the second case study. In the third case study it is developed a comparison between the simulation of the joint market methodology, in which the player bids to the ancillary services is considered by network areas and a reference methodology. The fourth case study presents the simulation of joint market methodology based on Bialek topological distribution factors applied to transmission network with 7 buses managed by a TSO. The last case study presents a joint market model simulation which considers the aggregation of small players to a VPP, as well as complex contracts related to these entities. The case study comprises a distribution network with 33 buses managed by VPP, which comprises several kinds of distributed resources, such as photovoltaic, CHP, fuel cells, wind turbines, biomass, small hydro, municipal solid waste, demand response, and storage units.

Mode-Controlled Data-Flow Modeling of Real-Time Memory Controllers

Accepted in 13th IEEE Symposium on Embedded Systems for Real-Time Multimedia (ESTIMedia 2015), Amsterdam, Netherlands.

Modeling Vegetable Fractals by means of Fractional-order Equations

This paper characterizes four ‘fractal vegetables’: (i) cauliflower (brassica oleracea var. Botrytis); (ii) broccoli (brassica oleracea var. italica); (iii) round cabbage (brassica oleracea var. capitata) and (iv) Brussels sprout (brassica oleracea var. gemmifera), by means of electrical impedance spectroscopy and fractional calculus tools. Experimental data is approximated using fractional-order models and the corresponding parameters are determined with a genetic algorithm. The Havriliak-Negami five-parameter model fits well into the data, demonstrating that classical formulae can constitute simple and reliable models to characterize biological structures.

Adolescents and School Asthma Knowledge and Attitudes

Introduction: bronchial asthma is a chronic disease that affects a high percentage of adolescents, with a significant restriction of daily activities, and is a cause of school absenteeism. The relationships between adolescents and asthma disease in school were assessed, with a view to improving knowledge about the asthmatic adolescent. Methods: a survey was conducted in the Lisbon metropolitan area, covering urban (Lisbon) and rural (Lourinh˜a ) zones and including 1879 students and 81 teachers from the 7th to 9th high school years. The study groups were asthmatic students, their peers, and teachers. A self-administered questionnaire was applied to collect information. The results were compared with a reference group of 91 asthmatic students attending our Department of Immunoallergy-Hospital Dona Estefânia. Cotinine urinary measurements were made in a sample of asthmatics and a control group. Results: the prevalence of current asthma among students was 10%. Estimates of asthma annual burden among 7th to 9th year students from Lisbon and Lourinh˜a high schools included 4,307 days missed from school, 4,148 medical consultations and a minimum of 351 hospital emergency care and 80 hospital admissions. Exposure to passive smoking was not significantly different between asthmatic students and theirs peers. Cotinine urinary measurements did not discriminate between exposed and non-exposed individuals. Cigarette smoking was almost as common among adolescent asthmatics (5.4%) as it was in non-asthmatic subjects (6.7%). However, 55% of asthmatics mentioned active and passive smoking as an asthma exacerbating factor. Asthmatic students, theirs peers and teachers showed a deficient knowledge about asthma (mean group scores: 17.6; 14.2 and 17.7 of a possible 30), particularly in the areas related to asthma recognition and its management. Asthmatics attending our Allergy Department had the highest scores. All groups showed tolerance in the sense of a positive and understanding attitude toward a person with asthma. However, traditional beliefs about asthma disease (dependence, inferiority...) were confirmed. A positive correlation between knowledge levels and tolerance attitudes was found. Conclusion: in view of the dimension of the asthma problem in adolescence and its social and economic impact, it is justifiable to assess the need for the implementation of asthma education programs in schools in order to improve asthma management by the adolescents and their schools.

Fractional Calculus: Application in modeling and control

This contribution introduces the fractional calculus (FC) fundamental mathematical aspects and discuses some of their consequences. Based on the FC concepts, the chapter reviews the main approaches for implementing fractional operators and discusses the adoption of FC in control systems. Finally are presented some applications in the areas of modeling and control, namely fractional PID, heat diffusion systems, electromagnetism, fractional electrical impedances, evolutionary algorithms, robotics, and nonlinear system control.

Modeling and Control of a Dragonfly-Like Robot

Dragonflies demonstrate unique and superior flight performances than most of the other insect species and birds. They are equipped with two pairs of independently controlled wings granting an unmatchable flying performance and robustness. In this paper it is studied the dynamics of a dragonfly-inspired robot. The system performance is analyzed in terms of time response and robustness. The development of computational simulation based on the dynamics of the robotic dragonfly allows the test of different control algorithms. We study different movement, the dynamics and the level of dexterity in wing motion of the dragonfly. The results are positive for the construction of flying platforms that effectively mimic the kinematics and dynamics of dragonflies and potentially exhibit superior flight performance than existing flying platforms.

System Modeling and Control Through Fractional-Order Algorithms

The theory of fractional calculus goes back to the beginning of thr throry of differential calculus but its inherent complexity postponed the applications of the associated concepts. In the last decade the progress in the areas of chaos and fractals revealed subtle relationships with the fractional calculus leading to an increasing interest in the development of the new paradigm. In the area of automaticcontrol preliminary work has already been carried out but the proposed algorithms are restricted to the frequency domain. The paper discusses the design of fractional-order discrete-time controllers. The algorithms studied adopt the time domein, which makes them suited for z-transform analusis and discrete-time implementation. The performance of discrete-time fractional-order controllers with linear and non-linear systems is also investigated.

Environmental modeling with precision navigation using ROAZ autonomous surface vehicle

The use of robotic vehicles for environmental modeling is discussed. This paper presents diverse results in autonomous marine missions with the ROAZ autonomous surface vehicle. The vehicle can perform autonomous missions while gathering marine data with high inertial and positioning precision. The underwater world is an, economical and environmental, asset that need new tools to study and preserve it. ROAZ is used in marine environment missions since it can sense and monitor the surface and underwater scenarios. Is equipped with a diverse set of sensors, cameras and underwater sonars that generate 3D environmental models. It is used for study the marine life and possible underwater wrecks that can pollute or be a danger to marine navigation. The 3D model and integration of multibeam and sidescan sonars represent a challenge in nowadays. Adding that it is important that robots can explore an area and make decisions based on their surroundings and goals. Regard that, autonomous robotic systems can relieve human beings of repetitive and dangerous tasks.

Simulação de Robôs Quadrúpedes Utilizando o SimMechanics

Desde sempre o Homem procurou automatizar tarefas repetitivas. Tanto na indústria como no sector doméstico ou de comércio estão constantemente a surgir novos equipamentos procurando aumentar o nível de automação de diversas tarefas. A necessidade de empresas criadoras de produtos inovadores se manterem concorrenciais obrigou à adopção de métodos de projecto e planeamento mais estruturados e eficientes que eliminem os desperdícios tanto de material como de tempo. Diversas construções em termos orçamentais e o aumento da procura de produtos de alta qualidade a baixo custo deu origem a um novo tipo de programas, os programas de simulação virtual. Tal como na indústria, também na investigação nas Instituições de Ensino Superior se procuram adoptar os métodos de trabalho mais eficientes possíveis. Uma parte dos programas de simulação robótica utilizados hoje em dia na investigação no Instituto Superior de Engenharia do Porto estão concebidos em linguagem C. Embora esta linguagem seja extremamente capaz, existem métodos mais adequados de simulação que aceleram o processo de modelação permitindo a visualização do movimento e simulação de diversas situações potencialmente criticas sem existir a necessidade de construção de um protótipo funcional do robô. Durante o último ano, este projecto permitiu construir um modelo de um robô quadrúpede num programa de simulação virtual chamado Simmechanics™. Embora haja já algum trabalho desenvolvido nesta área, constatou-se que a informação existente possuía algumas lacunas. Com o trabalho desenvolvido preparou-se esta dissertação que pretende clarificar algumas questões que surgem na modelação de um robô. Neste documento explica-se como modelar um robô de corpo flexível, modelar as pernas e as respectivas juntas da anca e do joelho assim como também se apresenta a modelação de um contacto com o solo recorrendo a um modelo descrito na literatura. Este documento foi escrito a pensar no leitor, procurando-se explicar de forma simples mas concisa os diversos passos necessários para construir um modelo virtual de um robô. O autor espera, desta forma, ajudar futuros colegas que pretendam trabalhar com o Simmechanics™ a mais facilmente se integrarem com o programa aumentando desta forma o declive da curva de aprendizagem e permitindo um maior aproveitamento desta ferramenta.

Sistema Inteligente de Apoio ao Coach

O coaching é um processo que permite ajudar um ou mais indivíduos a definirem e saberem como concretizar os seus objetivos, sejam eles pessoais ou profissionais. Atualmente, existe um interesse e procura crescente de pessoas com experiência nesta área (designados por coaches) por parte de empresas, equipas desportivas, escolas e outras organizações, com a finalidade de obter um maior rendimento. De forma a ajudar os intervenientes no processo, este documento demonstra a necessidade de existir uma ferramenta de apoio que permite aos coaches gerirem melhor a sua atividade profissional. A pesquisa e estudo efetuados procuram responder a este caso, desenvolvendo um sistema informático inteligente de apoio ao coach dotado de uma interface centrada no utilizador. Antes de iniciar o desenvolvimento de um sistema inteligente é necessário realizar e apresentar um levantamento do estado da arte, mais concretamente sobre a interação homem-computador, modelação do perfil de utilizador e processo de coaching, que apresenta os fundamentos teóricos para a escolha da metodologia de desenvolvimento adequado. São apresentadas posteriormente as fases constituintes do modelo de desenvolvimento de interfaces escolhido, a engenharia de usabilidade, que se inicia com uma análise detalhada, permitindo de seguida uma estruturação dos conhecimentos obtidos e a aplicação de linhas de orientação estipuladas, finalizando com testes de utilização e respetivo feedback dos utilizadores. O protótipo desenvolvido distingue utilizadores com diferentes características, através de uma classificação por níveis e permite gerir todo o processo de coaching efetuado a outras pessoas ou ao próprio utilizador. O facto de existir uma classificação dos utilizadores faz com que a interação entre sistema e utilizadores seja diferente e adaptada às necessidades de cada um. O resultado dos testes de utilização com um caso prático e dos questionários efetuados permite detetar se o modelo foi bem-sucedido e funciona corretamente e o que é necessário alterar no futuro para facilitar a interação e satisfazer as necessidades de cada utilizador.

Multi-agent simulation of competitive electricity markets: Autonomous systems cooperation for European market modeling

The electricity market restructuring, and its worldwide evolution into regional and even continental scales, along with the increasing necessity for an adequate integration of renewable energy sources, is resulting in a rising complexity in power systems operation. Several power system simulators have been developed in recent years with the purpose of helping operators, regulators, and involved players to understand and deal with this complex and constantly changing environment. The main contribution of this paper is given by the integration of several electricity market and power system models, respecting to the reality of different countries. This integration is done through the development of an upper ontology which integrates the essential concepts necessary to interpret all the available information. The continuous development of Multi-Agent System for Competitive Electricity Markets platform provides the means for the exemplification of the usefulness of this ontology. A case study using the proposed multi-agent platform is presented, considering a scenario based on real data that simulates the European Electricity Market environment, and comparing its performance using different market mechanisms. The main goal is to demonstrate the advantages that the integration of various market models and simulation platforms have for the study of the electricity markets’ evolution.

Metodologia BIM, aplicada à preparação, controlo e gestão de obra

O âmbito deste trabalho envolve o teste do modelo BIM numa obra em construção pela Mota-Engil – Engenharia, na extração experimental de peças desenhadas de preparação e apoio à execução de obra. No capítulo 1 deste relatório são definidos o âmbito e os objetivos deste trabalho, é feito um enquadramento histórico do tema e abordados conceitos e atividades da preparação de obra, na sua forma tradicional. O estado do conhecimento da preparação de obras e mais em concreto da tecnologia BIM a nível nacional e internacional é abordado no capítulo 2. Nesse sentido procura-se definir os conceitos principais inerentes a esta nova metodologia, que passa por identificar e caraterizar a tecnologia envolvida e o seu nível de desenvolvimento. Com suporte em casos práticos de preparação de obra na sua forma tradicional, identificados e desenvolvidos no capítulo 3, foi compilado um processo tipo de peças desenhadas de suporte identificadas e caracterizadas no capítulo 4, frequentes e comuns à execução de diversos tipos de obras de edifícios. Assente na compilação baseada em casos práticos e no estudo do projeto de execução da empreitada que sustenta o presente trabalho, com base no qual o modelo BIM foi concebido, identificou-se um conjunto de peças desenhadas de preparação e apoio à execução dos trabalhos, em 2D, a extrair do modelo. No capítulo 5, é feita uma descrição do modo como foi estudado o projeto da obra, com evidência para os fatores mais relevantes, especificando os desenhos a extrair. Suportada pelo programa de modelação ArchiCAD, a extração do conjunto de desenhos identificados anteriormente foi conseguida com recurso às funcionalidades disponíveis no software, que permite a criação de desenhos 2D atualizáveis ou não automaticamente a partir do modelo. Qualquer alteração introduzida no modelo virtual é automaticamente atualizada nos desenhos bidimensionais, caso o utilizador assim o pretenda. Ao longo desse trabalho foram detetados e analisados os condicionalismos inerentes ao processo de extração, referidos no capítulo 6, para estabelecimento de regras de modelação padrão a adotar em futuras empreitadas, que possam simplificar a obtenção dos elementos desenhados de preparação necessários à sua execução. No ponto 6.3 são identificadas melhorias a introduzir no modelo. Em conclusão no capítulo 7 são abordadas especificidades do setor da construção que sustentam e evidenciam cada vez mais a necessidade de utilizar as novas tecnologias com vista à adoção de práticas e ferramentas padrão de apoio à execução de obras. Sendo a tecnologia BIM, transversal a todo o setor, a sua utilização com regras padrão na conceção dos modelos e na extração de dados, potencia a otimização dos custos, do tempo, dos recursos e da qualidade final de um empreendimento, ao longo de todo o seu ciclo de vida, para além de apoiar com elevada fiabilidade as tomadas de decisão ao longo desse período. A tecnologia BIM, possibilita a antevisão do edifício a construir com um elevado grau de pormenor, com todas as vantagens que daí advêm.

Projeto de estruturas de edifícios em betão armado apoiado em ferramentas BIM

O presente trabalho refere-se a um relatório de estágio para a conclusão do Mestrado em Engenharia Civil - ramo de Estruturas no Instituto Superior de Engenharia do Porto. O estágio decorreu na empresa FASE - Estudos e Projectos S.A. durante um período de seis meses. Este documento tem como principal objetivo apresentar o desenvolvimento dos conhecimentos das fases de um projeto de um edifício. Aborda-se a modelação e análise de um edifício alto em betão armado, situado em Moçambique, salientando o dimensionamento dos elementos estruturais. Numa segunda fase, para aprofundar o conceito BIM, propôs-se a integração desta metodologia ao projeto já elaborado tendo em vista a ligação bidirecional dos programas de cálculo com os programas de desenho. Um dos objetivos de elaborar um trabalho em ambiente empresarial é o desenvolvimento de competências socio-profissionais e transversais. Para isso, este trabalho passou também pelo acompanhamento de outros projetos sendo dois deles apresentados no último capítulo.

The relationship between knowledge acquisition on international assignments and career development: an exploratory study with portuguese repatriates

This paper explores the relationship between the expatriates’ knowledge acquisition (KA) and their career development after an international assignment (IA). The purpose of this paper is to examine the role of expatriates in KA and transfer within International Portuguese multinational corporations. Furthermore, with this empirical study we try to analyse how the knowledge that is acquired and transferred translates into a basis for career development after the IA. This phenomenon has a special relevance in the Portuguese context, because this country is known a growing process of globalization in recent years. Furthermore, (a) there are no empirical studies concerning knowledge transfer and career development of repatriates from Portuguese companies; (b) little is known about the repatriates’ contributions to their home company after IA. This paper is one of the first to focus specifically on the repatriates’ role in KA and transfer from the host company to their Portuguese home company. A qualitative research methodology is used, specifically through an exploratory case study approach, which examines how knowledge management (KM) acquisition or transferring during IA are important for the repatriates’ career development in the Portuguese home company. Data were collected through semi-structured interviews to 42 Portuguese international assignees and 18 organizational representatives from nine Portuguese companies. Preliminary results show that KA and transfer made by Portuguese expatriates contributes directly to their career development. Moreover, evidence reveals that not all repatriates were promoted after their IA; rather some repatriates were even demoted after their IA. Furthermore, the results obtained suggest that the type of knowledge which acquired or transferred plays a central role in the career development after repatriation. According to these results, the paper discusses the major theoretical and practical implications. Suggestions for future research are also presented.

A framework for supporting knowledge representation – an ontological based approach

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores