Tectónica da região de Sintra

Photo-interpretation of aerial stereopairs of the Sintra region on the approx. 1/32 000 scale together with field work allowed the production of the present Tectonic Map of the Sintra region. It is now possible to separate structures which resulted from two different tectonic events: one, corresponding to the intrusion of the Late Cretaceous Sintra igneous diapir, and the other the Miocene compressive event, the most important tectonic inversion phase of the Lusitanian Basin. The former are present to the south, southeast and east of the intrusion and within the intrusion itself, affecting the peripheral granites and their contacts with the gabbro-syenite core. These structures comprehend: i) faults and conical fractures striking parallel to the massif boundary, which were intruded by dykes, ii) vertical faults and fractures of two conjugate sets, dextral NNW-SSE and sinistral NNE-SSW. These faults are certainly associated with the E-W striking massif's northwards directed thrust and indicate a N-S oriented horizontal maximum compressive stress. The Miocene compressive event reactivated most of the inherited structures as follows. The NNWSSE faults located on the Sintra southern platform were reactivated as dextral strike slip faults and the E-W thrust along the northern boundary of the massif was also reactivated. This thrust propagated to the east. It also enhanced the asymmetry of the rim-syncline, uplifted the massif and reactivated the NNE-SSW faults as sinistral lateral ramps, which also accommodated vertical throw. The present Tectonic Map of Sintra together with the available geophysical data (MOREIRA, 1984, KULLBERG et al., 1991, SILVA & MIRANDA, 1994) allowed reassessment of the models proposed for the emplacement of the Sintra, Sines and Monchique igneous massifs, which intruded during Late Cretaceous times along the deep dextral NNW-SSE oriented strike slip fault (RIBEIRO et al., 1979; TERRINHA, 1998; TERRINHA & KULLBERG, 1998).

Tectónica da cadeia da Arrábida

Geociências, Museu Nac. Hist. Nat. Univ. Lisboa, nº 2, 35-84

Development of thermoresponsive (polysulfone/polyacrylonitrile) - based membranes for bioseparation processes

Mestrado integrado em Engenharia Química e Bioquímica

Phialemonium curvatum infection after bone marrow transplantation

We report a case of cutaneous infection caused by Phialemonium curvatum GAMS et COOKE, 1983, after bone marrow transplantation. The genus Phialemonium was created by GAMS & MCGINNIS in 1983 including three new species: Ph. obovatum, Ph. curvatum and Ph. dimorphosporum, and represents an intermediate genus between Acremonium and Phialophora. Nowadays, the genus Phialemonium is considered to be a pheoid fungus which may cause the eventual lesions observed in pheo- and hyalohyphomycosis. Species of this genus have been described as opportunistic agents in humans and animals, mainly as a result of immunosuppression. In the present case, the patient had multiple myeloma and received an allogenic bone marrow transplant from his HLA-compatible brother. Two months after transplantation, he developed purplish and painful nodular lesions on the right ankle. Some of these lesions drained spontaneously and apparently hyaline mycelial filaments were observed, whose culture was initially identified as Acremonium sp. Subsequent studies showed that the fungus was Phialemonium curvatum. The infection was treated with amphotericin B, followed by ketoconazole. The patient was submitted to surgical debridement followed by two skin grafts to repair the bloody area. The duration of the treatment was 4 months and secondary prophylaxis with ketoconazole alone was maintained for one additional month. No recurrence was observed after discontinuation of treatment. The authors comment on the pathogenicity of the genus Phialemonium.

Association between human parvovirus B19 and arthropathy in Belém, Pará, north Brazil

A total of 220 patients with arthropathy were selected in Belém, Pará between January 1994 and December 2000, and screened for the presence of human parvovirus B19 IgM and IgG antibodies by enzyme-linked immunosorbent assay (ELISA). A subgroup (n = 132) of patients with high levels of antibodies (either IgM+/IgG+ or IgM-/IgG+) were examined for the presence of DNA by polymerase chain reaction/nested PCR. Recent/active infection (detection of IgM and/or IgG-specific antibodies and presence of viral DNA) was identified in 47.7% of the 132 individuals with arthropathy. In our study, women were significantly more affected (59.7%) than men (35.4%) (P = 0.0006). The age group of 11-20 years (84.6%), among female patients, and 21-30 years (42.1%), among male, were those with the highest incidence rates. The analysis of the temporal distribution of B19-associated arthropaties showed a cyclic pattern, with peak incidence rates occuring at 3-5 year intervals. Significant diference (P = 0.01) was observed when comparing both the highest (39.0%) and the lowest (11.0%) seropositivity rates for the years of 1995 and 2000, respectively. The interfalangial joints of hands and feet were mostly affected, with 50.0% and 48.0% of cases among both women and men, respectively. In a smaller proportion, other joints such as those of knee, ankle, pulse and shoulder were affected. As for the duration, symptoms lasted 1 to 5 days in 54.0% of the individuals, whereas in 46.0% of them the disease lasted 6-10 days, if considered the subgroup (n = 63) of patients with recent/active infection by parvovirus B19. In our study, joint clinical manifestations occurred symmetrically. Our results indicate that B19 may be an important agent of arthropathies in our region, and this underscores the need for specific laboratory diagnosis when treating patients suffering from acute arthropathy, mainly pregnant women.

Development of molecularly imprinted polymers using supercritical fluid technology

Dissertação para obtenção do Grau de Doutor em Química Sustentável

The Spectrum of Mutations and Molecular Pathogenesis of Hemophilia A in 181 Portuguese Patients

Disease-causing alterations within the F8 gene were identified in 177 hemophilia A families of Portuguese origin. The spectrum of non-inversion F8 mutations in 101 families included 67 different alterations, namely: 36 missense, 8 nonsense and 4 splice site mutations, as well as 19 insertions/deletions. Thirty-four of these mutations are novel. Molecular modeling allowed prediction of the conformational changes introduced by selected amino acid substitutions and their correlation with the patients' phenotypes. The relatively frequent, population-specific, missense mutations together with de novo alterations can lead to significant differences in the spectrum of F8 mutations among different populations.

Reconstruction of Large Defect of Foot with Extensive Bone Loss Exclusively Using a Latissimus Dorsi Muscle Free Flap: a Potential New Indication for this Flap

In cases of extensive damage to the foot, with significant bone loss, it is generally accepted that reconstruction must include bone flaps or grafts either in the emergency setting or subsequently. In this report, we describe the case of an 18-year-old student with an avulsion injury of the dorsum of his right foot. Consequently, he lost most of the soft tissue over the dorsum of the foot and the cuboid, navicular, and cuneiform bones. A latissimus dorsi free flap was used to reconstruct the defect. A functional pseudoarthrosis developed between the remaining bones of the foot, and the patient experienced satisfactory foot function after rehabilitation. For this reason, no additional reconstructive procedure was undertaken. This case suggests that it might be adequate to use the latissimus dorsi muscle flap more liberally than previously reported in the reconstruction of extensive defects of the dorsum of the foot, including cases with significant bone loss. This option could avoid the morbidity and inconvenience of a second surgery and the need to harvest a bone flap or graft.

USE OF LOPINAVIR/RITONAVIR ASSOCIATED WITH ERGOTAMINE RESULTING IN FOOT AMPUTATION: BRIEF COMMUNICATION

A 32-year-old female, was diagnosed in 2004 with a C1 HIV1 infection, using zidovudine/lamivudine 300/150 mg BID and lopinavir/ritonavir 400/100 mg BID, in addition to prophylaxis with trimethoprim-sulfamethoxazole 800/160 mg QD, but no prophylaxis with macrolide antibiotics. The patient presented with a severe headache and was prescribed two capsules of the anti-migraine drug Ormigrein™, which contained ergotamine tartrate 1 mg, caffeine 100 mg, paracetamol 220 mg, hyoscyamine sulfate 87.5 mcg, and atropine sulfate 12.5 mcg. Afterwards she was prescribed one capsule of Ormigrein every 30 minutes for a total of six capsules a day. The patient took the medication as prescribed but developed a pain in her left ankle three days later, which evolved to the need for amputation.

Forward osmosis membranes tailored by hydrogel coatings

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Preparation and characterization of microfiltration flat polymeric membranes for biomedical applications

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Study of multi-component systems in polybenzimidazole membrane formation and their impact on membrane performance

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Reinterpretation de l'Histoire Stratigraphique et Tectonique de la Structure de Serra de El-Rei (Portugal)

Les travaux faits sur le terrain et les interprétations cartographiques de ces dernières années, montrant la pertinence des observations de Paul Choffat au siècle dernier, permettent de préciser l'échelle stratigraphique et de mieux distinguer les phases de l'histoire tectonique de la structure de Serra de EI-Rei. En attendant la publication d'une cartographie très détaillée mettant en évidence le détail des déformations tectoniques, il faut souligner la dissymétrie des deux flancs de cette structure ainsi que le rôle de certaines failles transverses. Sur son flanc nord, la série liasique, allant des dolomies du Lias inférieur au Toarcien inférieur ou moyen, est recouverte stratigraphiquement et en légère discordance par le "Lusitanien" qui remanie à sa base des éléments du Toarcien inférieur ou moyen. Sur son flanc sud, dans la partie centrale, la série stratigraphique liasique est comparable à celle de l'autre flanc, mais les dépôts du Toarcien, plus complets, sont affectés au cours de la zone à Meneghinii par des perturbations synsédimentaires avec fossiles brisés et/ou remaniés et des réductions d'épaisseur. Plus à l'Est, le Toarcien est très réduit et (tectoniquement?) en contact avec le Dogger. Au Sud-Ouest en revanche, prés de Bolhos, la série toarcienne est plus complète et couronnée par l'Aalénien inférieur, mais tronquée par un contact oblique N-S, repris par la tectonique récente. Sur ce flanc, le Bajocien inférieur est représenté mais peu épais; il est suivi par le Bajocien supérieur, le Bathonien et le Callovien très développés qui sont recouverts par un "Lusitanien" épais, très différent de celui du flanc nord. Cette série du Jurassique moyen et supérieur a été décrite dans la thèse de Christiane Ruget (1963). La structure de Serra de EI-Rei constitue une sorte de raccord E-W entre les importantes structures (diapiriques ?) méridiennes de Caldas da Rainha au NE et de Bolhos au SW. II s'agit d'une structure de tectonique distensive, en demi-graben, d'âge jurassique, qui est responsable de la dissymétrie des séries lithostratigraphiques sur ses deux flancs; au Miocène, pendant la compression bétique, cette structure a subi une inversion en constriction. Un modèle de l'évolution sédimentaire du secteur est présenté.

Design of future distribution grids

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Design and characterization of Chitin- Glucan polymeric structures for wound dressing materials

The main objective of this work was the development of polymeric structures, gel and films, generated from the dissolution of the Chitin-Glucan Complex (CGC) in biocompatible ionic liquids for biomedical applications. Similar as chitin, CGC is only soluble in some special solvents which are toxic and corrosive. Due to this fact and the urgent development of biomedical applications, the need to use biocompatible ionic liquids to dissolve the CGC is indispensable. For the dissolution of CGC, the biocompatible ionic liquid used was Choline acetate. Two different CGC’s, KiOnutrime from KitoZyme and biologically produced CGC from Faculdade de Ciencias e Tecnologia (FCT) - Universidade Nova de Lisboa, were characterized in order to develop biocompatible wound dressing materials. The similar result is shown in term of the ratio of chitin:glucan, which is 1:1.72 for CGC-FCT and 1:1.69 for CGC-Commercial. For the analysis of metal element content, water and inorganic salts content and protein content, both polymers showed some discrepancies, where the content in CGC-FCT is always higher compared to the commercial one. The different characterization results between CGC-FCT and CGC-Commercial could be addressed to differences in the purification method, and the difference of its original strain yeast, whereas CGC-FCT is derived from P.pastoris and the commercial CGC is from A.niger. This work also investigated the effect of biopolymers, temperature dissolution, non-solvent composition on the characteristics of generated polymeric structure with biocompatible ionic liquid. The films were prepared by casting a polymer mixture, immersion in a non-solvent, followed by drying at ambient temperature. Three different non-solvents were tested in phase inversion method, i.e. water, methanol, and glycerol. The results indicate that the composition of non-solvent in the coagulation bath has great influence in generated polymeric structure. Water was found to be the best coagulant for producing a CGC polymeric film structure. The characterizations that have been done include the analysis of viscosity and viscoelasticity measurement, as well as sugar composition in the membrane and total sugar that was released during the phase inversion method. The rheology test showed that both polymer mixtures exhibit a non- Newtonian shear thinning behaviour. Where the viscosity and viscoelasticity test reveal that CGCFCT mixture has a typical behaviour of a viscous solution with entangled polymer chains and CGCCommercial mixture has true gel behaviour. The experimental results show us that the generated CGC solution from choline acetate could be used to develop both polymeric film structure and gel. The generated structures are thermally stable at 100° C, and are hydrophilic. The produced films have dense structure and mechanical stabilities against puncture up to 60 kPa.