Hole cleaning performance monitoring during the drilling of directional wells

During drilling operation, cuttings are produced downhole and must be removed to avoid issues which can lead to Non Productive Time (NPT). Most of stuck pipe and then Bottom-Hole Assembly (BHA) lost events are hole cleaned related. There are many parameters which help determine hole cleaning conditions, but a proper selection of the key parameters will facilitate monitoring hole cleaning conditions and interventions. The aim of Hole Cleaning Monitoring is to keep track of borehole conditions including hole cleaning efficiency and wellbore stability issues during drilling operations. Adequate hole cleaning is the one of the main concerns in the underbalanced drilling operations especially for directional and horizontal wells. This dissertation addresses some hole cleaning fundamentals which will act as the basis for recommendation practice during drilling operations. Understand how parameters such as Flowrate, Rotation per Minute (RPM), Rate of Penetration (ROP) and Mud Weight are useful to improve the hole cleaning performance and how Equivalent Circulate Density (ECD), Torque & Drag (T&D) and Cuttings Volumes coming from downhole help to indicate how clean and stable the well is. For case study, hole cleaning performance or cuttings volume removal monitoring, will be based on real-time measurements of the cuttings volume removal from downhole at certain time, taking into account Flowrate, RPM, ROP and Drilling fluid or Mud properties, and then will be plotted and compared to the volume being drilled expected. ECD monitoring will dictate hole stability conditions and T&D and Cuttings Volume coming from downhole monitoring will dictate how clean the well is. T&D Modeling Software provide theoretical calculated T&D trends which will be plotted and compared to the real-time measurements. It will use the measured hookloads to perform a back-calculation of friction factors along the wellbore.

Context-based identification of energy consumption in industrial plants

Nowadays, reducing energy consumption is one of the highest priorities and biggest challenges faced worldwide and in particular in the industrial sector. Given the increasing trend of consumption and the current economical crisis, identifying cost reductions on the most energy-intensive sectors has become one of the main concerns among companies and researchers. Particularly in industrial environments, energy consumption is affected by several factors, namely production factors(e.g. equipments), human (e.g. operators experience), environmental (e.g. temperature), among others, which influence the way of how energy is used across the plant. Therefore, several approaches for identifying consumption causes have been suggested and discussed. However, the existing methods only provide guidelines for energy consumption and have shown difficulties in explaining certain energy consumption patterns due to the lack of structure to incorporate context influence, hence are not able to track down the causes of consumption to a process level, where optimization measures can actually take place. This dissertation proposes a new approach to tackle this issue, by on-line estimation of context-based energy consumption models, which are able to map operating context to consumption patterns. Context identification is performed by regression tree algorithms. Energy consumption estimation is achieved by means of a multi-model architecture using multiple RLS algorithms, locally estimated for each operating context. Lastly, the proposed approach is applied to a real cement plant grinding circuit. Experimental results prove the viability of the overall system, regarding both automatic context identification and energy consumption estimation.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Levantamento, identificação e classificação de dados para a gestão da manutenção numa empresa industrial

O presente trabalho refere-se à análise de conceitos gerais de manutenção e sua gestão, aplicados a uma indústria de produção de fibra têxtil sintética. Contempla uma primeira fase de organização e segmentação de um registo histórico de dados, para a identificação de equipamentos críticos e o seu impacto a nível capital na instalação industrial, e uma outra fase de caracterização de tipos de avaria comuns para a definição de um plano de acções. Neste contexto o trabalho visa o estudo de um equipamento essencial ao processo produtivo, pois a ocorrência de uma avaria/falha traduz-se na paragem da máquina e consequentemente perda na produção. Partindo dos dados organizados sobre avarias comuns identificam-se as causas raiz, com recurso a diagramas de causa e efeito. Acrescenta-se uma análise dos investimentos necessários para cumprir algumas das acções do plano. A estrutura de dados realizada permite à empresa dispor de uma nova ferramenta de apoio à gestão da manutenção, com vista a uma melhor preparação de trabalhos futuros e consequente aumento da produtividade.

Maritime Security in the Gulf of Guinea: Issues and Solutions for the 21st Century

A producer of 5.4 M bbl/d, totalling almost half of the consumption of the entire European Union, the Gulf of Guinea is a fundamental lifeline and maritime link between Europe, the Americas and Africa. Geographically positioned as a staging post for transit originating in Latin America and coupled with its relatively porous borders, the region is also the perfect stepping stone for contraband heading to European shores. While blessed with an enviable wealth of marine and mineral resources, the region is also plagued by an ever-increasing spectre of maritime piracy; accounting for around 30% of incidents in African waters from 2003 to 2011. It is for these reasons that this research centres around the issues of maritime security in the Gulf of Guinea, with a particular focus on the first two decades of the 21st century. This research looks to examine the overall picture of the present state of play in the area, before going on to provide an analysis of potential regional developments in maritime security. This research begins with the analysis of concepts/phenomena that have played a notable role in the shaping of the field of maritime security, namely Globalisation and security issues in the post-Cold War era. The ensuing chapter then focuses in on the Gulf of Guinea and the issues dominating the field of maritime security in the region. The penultimate chapter presents a SWOT analysis, undertaken as part of this research with the aim of correlating opinions from a variety of sectors/professions regarding maritime security in the Gulf of Guinea. The final chapter builds upon the results obtained from the abovementioned SWOT analysis, presenting a series of potential proposals/strategies that can contribute to the field of maritime security in the region over the coming years. This research draws to a close with the presentation of conclusions taken from this particular investigation, as well as a final overview of the earlier presented proposals applicable to the field of maritime security during the second decade of the 21st century.

E-commerce for Unilver food solutions

NSBE - UNL

O papel de Nikita Khrushchev no Complexo Militar e Industrial, no quadro da Guerra Fria

A presente dissertação visa aferir a dimensão e a relevância das alterações operadas por Nikita Khrushchev, enquanto líder da União Soviética, no Complexo Militar e Industrial deste país, no período da Guerra Fria. Neste contexto, as mesmas serão analisadas e proceder-se-á, paralelamente, ao estudo do impacto das mesmas a nível interno, bem como a nível externo, na interacção da União Soviética com os restantes actores da comunidade internacional, nomeadamente os Estados Unidos. Mormente, como forma de contextualizar as referidas alterações, proceder-se-á também ao apuramento dos motivos que estiveram subjacentes à transmutação de uma componente relevante nas Relações Internacionais, o Complexo Militar e Industrial Soviético.

Um olhar sobre a Descrição a partir das Séries " Licenciamento Industrial" e "Registo do Trabalho Nacional" da Direcção Regional de Economia do Centro

O presente trabalho resulta do estágio realizada na Secretaria Geral do Ministério da Economia e do Emprego. O estágio consistiu na descrição de duas Séries documentais. Com o presente trabalho pretende-se demonstrar a importância do uso das normas de descrição arquivística, mostrando a importância da descrição dos produtores, das funções e das entidades responsáveis pela sua custódia, conjugada com a descrição dos documentos.

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Product relatedness role on driving industrial policy success

This thesis aims to study how product relatedness to the current pattern of specialization influences the success of industrial policies in underdeveloped sectors. Drawing from Hausmann and Klinger (2006), this work extends the existing literature on the importance of proximity spillovers to explain economic development by focusing on underdeveloped sectors. We find that investment's success in an underdeveloped sector is more likely if it is highly related to the current pattern of specialization. However, heterogeneity amongst sectors is remarkable. Moreover, industrial policy cases are sometimes successful despite the bad odds provided by this criterion, suggesting further factors should be considered.

Optimal choice between even- and uneven-aged forestry: the case of non-industrial private forest owners

An infinite-horizon discrete time model with multiple size-class structures using a transition matrix is built to assess optimal harvesting schedules in the context of Non-Industrial Private Forest (NIPF) owners. Three model specifications accounting for forest income, financial return on an asset and amenity valuations are considered. Numerical simulations suggest uneven-aged forest management where a rational forest owner adapts her or his forest policy by influencing the regeneration of trees or adjusting consumption dynamics depending on subjective time preference and market return rate dynamics on the financial asset. Moreover she or he does not value significantly non-market benefits captured by amenity valuations relatively to forest income.

A Cidade do Trabalho: usos do património industrial (S. João da Madeira)

S. João da Madeira é uma localidade que desde cedo construiu os seus discursos em torno da identidade local sob o epíteto de Cidade do Trabalho. Mais recentemente, desde a última década do século XX, a cidade começou a olhar para a sua dimensão industrial do ponto de vista do seu cunho patrimonial, dentro do quadro emergente das políticas culturais e de identidade, no qual as identidades particulares – como à escala local – se querem afirmar no plano global. Partindo de uma primeira análise dos processos contemporâneos de patrimonialização do industrial no contexto de S. João da Madeira, concretizados pela via dos museus e do turismo, num trabalho de projeto que se apresenta como fase de investigação preliminar de um futuro trabalho de doutoramento, questiona-se como a antropologia poderá pensar o conceito de cultura popular fora dos contextos normalmente a estes atribuídos e como, consequentemente, poderá problematizar as fronteiras daquilo que poderá ser considerado ou não Património Cultural Imaterial (PCI), categoria com a qual a disciplina está historicamente comprometida.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Modelo hidrogeológico e rede de monitorização da água subterrânea na Zona Industrial e Logística de Sines (ZILS)

Na Zona Industrial e Logística de Sines (ZILS) estão instaladas empresas e indústrias que interferem na quantidade e qualidade da água subterrânea de aquíferos da região. Estas utilizam e libertam poluentes que, consequentemente, quando não cumpridas as normas de segurança, podem causar impactes no ambiente. A ZILS situa-se no Sistema Aquífero de Sines, na Massa de Água 032-Sines, este é constituído por dois aquíferos, um superficial detrítico livre e outro carbonatado profundo confinado. Apesar de se encontrarem separados em grande parte da sua extensão, na região sul, estes aquíferos encontram-se em conexão hidráulica. Esta ocorre a este da falha da Maria das Moitas onde, a partir da qual e até ao limite com o Paleozóico, não foi reconhecida a unidade argilosa do Miocénico, aumentado assim a vulnerabilidade do sistema e a pertinente otimização da rede de monitorização. Para a realização de um estudo mais aprofundado e avaliação dos efeitos sobre as águas subterrâneas na área de estudo, definiu-se uma metodologia de trabalho que engloba 4 etapas: (i) revisão bibliográfica; (ii) recolha de dados geológicos e hidrogeológicos dos arquivos da aicep Global Parques, S.A., SNIRH e LNEG; (iii) tratamento e análise dos dados obtidos em ArcGIS e traçado de perfis geológicos interpretativos; (iv) realização do modelo geológico e hidrogeológico e respetiva adequação da rede de monitorização. O modelo hidrogeológico concebido mostra que o escoamento no Sistema Aquífero de Sines se processa, predominantemente, de E para W a partir do limite situado no contacto por falha entre as unidades do Paleozóico e Meso-Cenozóico com orientação, quase perpendicular, à ribeira dos Moinhos. A este deste alinhamento é assinalada a presença de um aquífero fissurado sob as areias do Plio-Plistocénico localizado na Formação de Mira. O escoamento neste aquífero faz-se de NE para SW, em direção ao oceano, para a praia de S. Torpes.

A reindustrialização de Portugal num contexto de crise e hegemonia industrial dos países emergentes

O presente estudo teve como motivação compreender a importância e o papel da indústria para a retoma do crescimento económico de Portugal, integrado num contexto de desindustrialização progressiva nos últimos anos, e a um crescimento da importância e domínio de sectores de produção por parte de países emergentes, associado à crise surgida em 2008. Pretendeu-se enquadrar a problemática a nível nacional e europeu, contextualizando a indústria nacional, apontando as principais causas da desindustrialização e as suas consequências. Identificar os principais actores-chave e a sua participação no processo de reindustrialização. Identificar políticas e instrumentos de fomento da reindustrialização e principais conclusões.