Design of a low-voltage CMOS RF receiver for energy harvesting sensor node

In this thesis a CMOS low-power and low-voltage RF receiver front-end is presented. The main objective is to design this RF receiver so that it can be powered by a piezoelectric energy harvesting power source, included in a Wireless Sensor Node application. For this type of applications the major requirements are: the low-power and low-voltage operation, the reduced area and cost and the simplicity of the architecture. The system key blocks are the LNA and the mixer, which are studied and optimized with greater detail, achieving a good linearity, a wideband operation and a reduced introduction of noise. A wideband balun LNA with noise and distortion cancelling is designed to work at a 0.6 V supply voltage, in conjunction with a double-balanced passive mixer and subsequent TIA block. The passive mixer operates in current mode, allowing a minimal introduction of voltage noise and a good linearity. The receiver analog front-end has a total voltage conversion gain of 31.5 dB, a 0.1 - 4.3 GHz bandwidth, an IIP3 value of -1.35 dBm, and a noise figure lower than 9 dB. The total power consumption is 1.9 mW and the die area is 305x134.5 m2, using a standard 130 nm CMOS technology.

Design, implementation, and performance of a distributed and scalable sensor system for critical distance measurements in the CMS detector at LHC

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

Bioprocess design of canine adenovirus vectors for gene therapy applications

The potential of human adenovirus vectors as vehicles for gene transfer with clinical applications in vaccination, cancer treatment and in many monogenic and acquired diseases has been demonstrated in several studies and clinical trials. However, the clinical use of these vectors can be limited by pre-existing humoral and cellular anti-capsid immunity. One way to circumvent this bottleneck while keeping the advantages of using adenovirus vectors is using non-human viruses such as Canine Adenovirus type 2 (CAV-2). Moreover, CAV-2 vectors present attractive features to develop potential treatment of neurodegenerative and ocular disorders. While the interest in CAV-2 vectors increases, scalable and robust production processes are required to meet the need for preclinical and possibly clinical uses.(...)

Web Design como ferramenta de Comunicação Digital

WEB DESIGN COMO FERRAMENTA DE COMUNICAÇÃO DIGITAL: DESIGN E DESENVOLVIMENTO DE SITES, UTILIZANDO O GESTOR DE CONTEÚDOS WORDPRESS; DESIGN DE CONTEÚDOS VISUAIS PARA O FACEBOOK DE UMA MARCA

Business concept design of an innovative product: Partnership between Nmusic and Rovio Entertainment Ltd.

Field Lab in Entrepreneurial Innovative Ventures

Hepatitis B revaccination for healthcare workers who are anti-HBs-negative after receiving a primary vaccination series

INTRODUCTION: This study aimed to evaluate the response to hepatitis B (HB) revaccination of healthcare workers (HCW) who are negative for antibodies to HB surface antigen (anti-HBs) after a complete vaccination series. METHODS: HCW whose anti-HBs test was performed > 90 days after a HB vaccination course were given a 4th dose. A post-vaccination test was done within 30 to 90 days. RESULTS: One hundred and seventy HCW were enrolled: 126 (74.1%) were anti-HBs-positive after the 4th dose. CONCLUSIONS: Rechecking anti-HBs after the 4th HB vaccine dose is a practical approach in case of post-vaccination tests performed >90 days after the full vaccination course.

Prevalence of resistance phenotypes in Staphylococcus aureus and coagulase-negative isolates of venous ulcers of primary healthcare patients

INTRODUCTION: In venous ulcers, the presence of Staphylococcus aureus and coagulase-negative staphylococcus resistance phenotypes can aggravate and limit the choices for treatment. METHODS: Staphylococcus isolated from 69 patients (98 ulcers) between October of 2009 and October of 2010 were tested. The macrolide, lincosamide, streptogramin B (MLS B) group resistance phenotype detection was performed using the D-test. Isolates resistant to cefoxitin and/or oxacillin (disk-diffusion) were subjected to the confirmatory test to detect minimum inhibitory concentration (MIC), using oxacillin strips (E-test®). RESULTS: The prevalence of S. aureus was 83%, and 15% of coagulase-negative staphylococcus (CoNS). In addition were detected 28% of methicillin-resistant Staphylococcus aureus (MRSA) and 47% of methicillin-resistant coagulase-negative staphylococcus (MRCoNS). Among the S. aureus, 69.6% were resistant to erythromycin, 69.6% to clindamycin, 69.6% to gentamicin, and 100% to ciprofloxacin. Considering the MRSA, 74% were highly resistant to oxacillin, MIC ≥ 256µg/mL, and the MLS Bc constitutive resistance predominated in 65.2%. Among the 20 isolates sensitive to clindamycin, 12 presented an inducible MLS B phenotype. Of the MRCoNS, 71.4%were resistant to erythromycin, ciprofloxacin and gentamicin. Considering the isolates positive for β-lactamases, the MIC breakpoint was between 0.5 and 2µg/mL. CONCLUSIONS: The results point to a high occurrence of multi-drug resistant bacteria in venous ulcers in primary healthcare patients, thus evidencing the need for preventive measures to avoid outbreaks caused by multi-drug resistant pathogens, and the importance of healthcare professionals being able to identifying colonized versus infected venous ulcers as an essential criteria to implementing systemic antibacterial therapy.

Food insecurity of HIV/AIDS patients at a unit of outpatient healthcare system in Brasilia, Federal District, Brazil

INTRODUCTION: Food security remains to be one of the world's biggest problems and is found to be related to HIV/AIDS. The objective was to examine food insecurity in HIV/AIDS patients from Brasilia, Brazil. METHODS: Short version of the Food Security Scale was applied to patients with HIV/AIDS. RESULTS: A total of 103 patients participated (65 HIV+ and 38 with AIDS). Food insecurity was found in 33.8% of HIV+ patients and 36.8% of patients with AIDS. A relation between food insecurity and low educational and social levels was established. CONCLUSIONS: Food security should be an important component in HIV/AIDS treatment programs.

Prevalence and risk factors for Toxoplasma gondii infection among pregnant and postpartum women attended at public healthcare facilities in the City of Niterói, State of Rio de Janeiro, Brazil

IntroductionTo determine the prevalence of immunoglobulin G (IgG) and immunoglobulin M (IgM) anti-Toxoplasma gondii antibodies among pregnant and postpartum women attended within the public healthcare system in Niterói, State of Rio de Janeiro, and to detect possible exposure factors associated with T. gondii infection in this population.MethodsIgM and IgG anti-T. gondii antibodies were investigated in 276 pregnant and 124 postpartum women by using the indirect immunofluorescence (IFAT) and immunoenzymatic assay (ELISA) techniques. The participants were selected by convenience sampling. All these 400 patients filled out a free and informed consent statement, answered an epidemiological questionnaire and were informed about the disease.ResultsAmong the 400 samples analyzed, 234 (58.5%) were reactive to IgG anti-T. gondii antibodies, according to the IFAT and/or ELISA assay. One pregnant woman was found to be reactive to IgM anti-T. gondii antibodies, with an intermediate IgG avidity test. Risk factor analysis showed that seropositivity was significantly associated (p<0.05) with age, contact with cats and presence of rodents at home. Through a logistic regression model, these associations were confirmed for age and contact with cats, while education at least of the high school level was found to be a protective factor.ConclusionsThe prevalence rate of IgG anti-T. gondii antibodies in the City of Niterói was high and the risk factors for infection detected after multivariate analysis were: age over 30 years, contact with cats and education levels lower than university graduate level.

Strategic design of There App’s business model: From product to multi-sided platform

The following work project illustrates the strategic issues There App, a mobile application, faces regarding the opportunity to expand from its current state as a product to a multisided platform. Initially, a market analysis is performed to identify the ideal customer groups to be integrated in the platform. Strategic design issues are then discussed on how to best match its value proposition with the identified market opportunity. Suggestions on how the company should organize its resources and operational processes to best deliver on its value proposition complete the work.

How to design and develop There App: A mobile app focused on live video streaming, promoting new social interactions

This work project aims to demonstrate how to design and develop an innovative concept of video streaming app. The project combines technology push and market pull theories into developing a product that is more suitable for the customer needs, with the particularity that there is no other way of seeing any place in the world, live and ondemand. An analysis on the bigger influencers in terms of design-thinking and new product development, as Tim Brown or Paul Trott, lead to a better understanding on how There App should evolve, keeping in mind the customer desires and technical features.

Customer relationship management at Siemens Healthcare – a diagnosis and proposal for strategy and market segmentation

Towards a holistic perspective of CRM, this project aims to diagnose and propose a strategy and market segmentation for Siemens Healthcare. The main underlying principle is to apply a full customer-centric outlook taking own business properties into consideration while preserving Siemens Healthcare’s culture and vision. Mainly focused on market segmentation, this project goes beyond established boundaries by employing an unbiased perspective of CRM while challenging current strategy, goals, processes, tools, initiatives and KPIs. In order to promote a sustainable business excellence strategy, this project aspires to streamline CRM strategic importance and driving the company one step forward.

Healthcare and medical tourism - Cascais Municipality case study

The purpose of this work project is to evaluate Cascais’ potential of becoming a reference in Health Care and Medical Tourism in the near future. It is done a careful research about the industry, followed by a thorough analysis of the region. It is concluded that it holds many key characteristics and conditions for the development of this kind of clusters, even though it lacks consumers’ perception regarding this product. Some guidelines are suggested in order to position Cascais as a competitive player in this field.

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.