Vodacom Group: Equity research

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Gas Natural Fenosa: Equity research

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Duffy blood group genotypes among malaria patients in Rondônia, Western Brazilian Amazon

We have compared Duffy blood group genotype distribution, as determined by polymerase chain reaction with allele-specific primers, in 68 Plasmodium vivax-infected patients and 59 non-vivax malaria controls from Rondônia, Brazil. Homozygosity for the allele Fy, which abolishes Duffy antigen expression on erythrocytes, was observed in 12% non-vivax controls but in no P. vivax patient. However, no significant association was found between Fy heterozygosity and protection against P. vivax. The Fy x allele, which has recently been associated with very weak erythrocyte expression of Duffy antigen, was not found in local P. vivax patients.

Adsorption equilibria of flue gas components on activated carbon

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Experimental high-throughput adsorption unit for multi-evaluation of adsorbents for gas capture, storage and separation applications

Dissertação para obtenção do grau de Mestre em Engenharia Química e Bioquímica

Gas gap heat switch for CryoFree project

Cryogen-free superconducting magnet systems have become popular during the last two decades for the simple reason that with the use of liquid helium is rather cumbersome and is a scarce resource. Some available CFMS uses a mechanical cryocooler as cold source of the superconductor magnet. However, the cooling of the sample holder is still made through an open circuit of helium. A thermal management of a completely cryogen-free system is possible to be implemented by using a controlled gas gap heat switch (GGHS) between the cryocooler and the variable temperature insert (VTI). This way it would eliminate the helium open circuit. Heat switches are devices that allow to toggle between two distinct thermal states (ON and OFF state). Several cryogenic applications need good thermal contact and a good thermal insulation at different stages of operation. A versatile GGHS was designed and built with a 100 mm gap and tested with helium as exchange gas. An analytic thermal model was developed and a good agreement with the experimental data was obtained. The device was tested on a crycooler at 4 to 80 K ranges. A 285 mW/K thermal conductance was measured at ON state and 0.09 mW/K at OFF. 3000 ON/OFF thermal conductance ratio was obtained at 4 K with helium.

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Insights into the epidemiology of drug-resistant Streptococcus pneumoniae and closely-related streptococci in the era of conjugate vaccines

In Portugal, the introduction of the seven-valent pneumococcal conjugate vaccine (PCV7) has led to significant changes in the population structure of Streptococcus pneumoniae. However, the levels of antimicrobial resistance have not decreased and have been a matter of concern. (...)

Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

Extended-spectrum β-lactamase-producing Salmonella enterica serovar Oranienburg (CTX-M-2 group) in a pediatric hospital in Tucumán, Argentina

INTRODUCTION: Salmonella sp infections have been reported over recent years in hospitals in Argentina and other countries due to multiresistant strains. The aim of this study was to characterize the extended-spectrum β-lactamases in third-generation cephalosporin-resistant strains of Salmonella enterica serovar Oranienburg. METHODS: We studied 60 strains isolated from children with gastroenteritis and/or extraintestinal complications. The antibiotic susceptibility patterns of the isolates were analyzed and the β-lactamases were characterized using phenotyping and genotyping methods. RESULTS: All the strains were resistant to ampicillin, cefotaxime, cefepime and aztreonam and partially susceptible to ceftazidime, thus corresponding well with the resistance phenotype conferred by CTX-M-type β-lactamases. An isoelectric point enzyme (pI = 7.9) was detected in all of the strains, and this was confirmed by PCR as a member of the CTX-M-2 group. CONCLUSIONS: This is the first report of Salmonella enterica serovar Oranienburg producing β-lactamases of the CTX-M-2 group in a pediatric hospital in Tucumán, Argentina.

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Study of infection by Rickettsiae of the spotted fever group in humans and ticks in an urban park located in the City of Londrina, State of Paraná, Brazil

INTRODUCTION: Spotted fevers are emerging zoonoses caused by Rickettsia species in the spotted fever group (SFG). Rickettsia rickettsii is the main etiologic agent of Brazilian spotted fever (BSF) and it is transmitted by Amblyomma spp. ticks. METHODS: The study aimed to investigate SFG rickettsiae in the Arthur Thomas Municipal Park in Londrina, PR, by collecting free-living ticks and ticks from capybaras and blood samples from personnel working in these areas. Samples from A. dubitatum and A. cajennense were submitted for PCR in pools to analyze the Rickettsia spp. gltA (citrate synthase gene). RESULTS: All the pools analyzed were negative. Human sera were tested by indirect immunofluorescence assay with R. rickettsii and R. parkeri as antigens. Among the 34 sera analyzed, seven (20.6%) were reactive for R. rickettsii: four of these had endpoint titers equal to 64, 2 titers were 128 and 1 titer was 256. None of the samples were reactive for R. parkeri. An epidemiological questionnaire was applied to the park staff, but no statistically significant associations were identified. CONCLUSIONS: The serological studies suggest the presence of Rickettsiae related to SFG that could be infecting the human population studied; however, analysis of the ticks collected was unable to determine which species may be involved in transmission to humans.

Advanced megaesophagus (Group III) secondary to vector-borne Chagas disease in a 20-month-old infant

The authors report the case of a female infant with Group III (or Grade III) megaesophagus secondary to vector-borne Chagas disease, resulting in severe malnutrition that reversed after surgery (Heller technique). The infant was then treated with the antiparasitic drug benznidazole, and the infection was cured, as demonstrated serologically and parasitologically. After follow-up of several years without evidence of disease, with satisfactory weight and height development, the patient had her first child at age 23, in whom serological tests for Chagas disease yielded negative results. Thirty years after the initial examination, the patient's electrocardiogram, echocardiogram, and chest radiography remained normal.

Building a thinner gap in a gas-gap heat switch

25th International Cryogenic Engineering Conference and the International Cryogenic Materials Conference in 2014, ICEC 25–ICMC 2014

Acute schistosomiasis diagnosis: a new tool for the diagnosis of schistosomiasis in a group of travelers recently infected in a new focus of Schistosoma mansoni

IntroductionThe diagnosis of schistosomiasis mansoni on early stages of infection is important to prevent late morbidity. A simple, cheap, sensitive and specific assay for routine diagnosis of schistosome infection based on the detection of specific IgG for schistosomula tegument antigens (ELISA-SmTeg) was developed by our group.MethodsWe describe here an acute outbreak involving a travel group of 80 individuals from a non-endemic area of the State of Minas Gerais, Brazil. These individuals were in contact with a freshwater pool where Biomphalaria glabrata was found. Results obtained from our new methodology were compared to IgG antibody titers against soluble worm antigenic preparation (SWAP) by ELISA and, also to parasitological examination, nuclear magnetic resonance and clinical findings.ResultsELISA-SmTeg was capable of detecting 64 positive cases among the 80 individuals participating at the survey with a positivity ratio of 80% and a higher sensitivity than ELISA-SWAP that was only sensitive for 56% of positive cases. Besides, a significant correlation was found for the severity of the infection and the specific IgG titers against SmTeg.ConclusionsOur data showed that ELISA-SmTeg might serve as the initial diagnostic tool for acute stages of the infection in community-based helminth control programs or for the surveillance of individuals from non-endemic areas.