Enhancing the usability of numerical models with case-based reasoning

Abstract not available

The impact of cooking methods on the nutritional quality and safety of chicken breaded nuggets

The impact of cooking methods (industrial pre-frying, deep-fat frying and baking) on the nutritional quality and safety of chicken breaded nugget samples from supermarket and commercial brands was evaluated. The changes in the quality characteristics (nutritional composition, fatty acids profile, cholesterol and salt) of the fried food and frying oil, after ten consecutive frying operations, were evaluated. The total fat content of nuggets varied between 10.9 and 22.7 g per 100 g of edible portion and the salt content ranged from 0.873 to 1.63 g per 100 g. Taking into account one portion of nuggets, the daily intake of salt can reach 49%, which can have a significant impact on the health of those who regularly consume this type of food, especially considering the prevalence of hypertension around the world. The analysed chicken breaded nuggets are rich in unsaturated fatty acids, which have been related with potential health benefits, namely regarding cardiovascular diseases. The cholesterol content of baked samples was two times higher when compared with the fried ones. The trans fatty acids and polar compounds contents of the frying oil used for frying significantly increased, but the values were still away from the maximum recommended by legal entities for its rejection. From a nutritional point of view, it is possible to conclude that the applied cooking methods can significantly influence the nutritional quality and safety of the analysed chicken breaded nuggets. This study will contribute to important knowledge on how the applied cooking methods can change the nutritional quality and safety of foods, namely of chicken nuggets, and can be very useful for dietary recommendations and nutritional assessment.

Visualisation of numerical models for paper damage mechanics

Abstract not available

The Spatial Convergence of Knowledge in Portugal

Human resources are an essential element in territorial development. When these are characterized by a high level of training, they also enhance a number of effects in fundamental areas of binomial territorial-social cohesion. In this respect, the existence of higher education institutions throughout the territory allows the spread of human resources’ qualification but, by itself, does not guarantee the retention of these resources in different regions. Thus, the objective of this paper is to undertake a spatial analysis of convergence of knowledge through studying the evolution of the percentage of population with higher education in the periods elapsed between the last three censuses in Portugal. Although that percentage has risen appreciably, the convergence is shown to be (very) insignificant.

On the spatial convergence of (un)employment in Portugal

Regarding the EU policies of territorial cohesion is common to assume that, having the same been successful (in Portugal), regional disparities decreased. The purpose of this article is to assess the veracity of this allegation, for that considering the values of employment and unemployment rates by municipalities, determined in the last two censuses held in Portugal, i.e. 2001 and 2011. In doing so, spatial econometric techniques are used, namely local indicators of spatial association and spatial clusters, in order to better understand the eventual process of spatial convergence that may have occurred in Portugal in that period. The results point towards a spatial convergence of employment rates (both in total and by genres) and also of female unemployment rates but a spatial divergence of male unemployment rates.

Comparison of two methods for measuring the pubococcygeal line from sagittal-plane magnetic resonance imaging

Aims The pubococcygeal line (PCL) is an important reference line for determining measures of pelvic organ support on sagittal-plane magnetic resonance imaging (MRI); however, there is no consensus on where to place the posterior point of the PCL. As coccyx movement produced during pelvic floor muscle (PFM) contractions may affect other measures, optimal placement of the posterior point is important. This study compared two methods for measuring the PCL, with different posterior points, on T2-weighted sagittal MRI to determine the effect of coccygeal movement on measures of pelvic organ support in older women. Methods MRI of the pelvis was performed in the midsagittal plane, at rest and during PFM contractions, on 47 community-dwelling women 60 and over. The first PCL was measured to the tip of the coccyx (PCLtip) and the second to the sacrococcygeal joint (PCLjnt). Four measures of pelvic organ support were made using each PCL as the reference line: urethrovesical junction height, uterovaginal junction height, M-line and levator plate angle. Results During the PFM contraction the PCLtip shortened and lifted (P < 0.001); the PCLjnt did not change (P > 0.05). The changes in the four measures of pelvic organ support were smaller when measured relative to the PCLtip as compared to those to the PCLjnt (P < 0.001). Conclusions Coccyx movement affected the length and position of the PCLtip, which resulted in underestimates of the pelvic-organ lift produced by the PFM contraction. Therefore, we recommend that the PCL be measured to the sacrococcygeal joint and not to the tip of the coccyx

Worldwide convergence of IFRS: Evidence from the global automotive industry

Worldwide convergence of International Financial Reporting Standards (IFRS), ongoing since 2002, is a requirement if international comparability between publicly listed companies is to be ensured. Convergence is examined from the point of view of regulators, accountants, and users of financial information. For this purpose, data on 534 companies from the global automotive industry is used. This paper concludes that worldwide convergence is mostly being effective. Its triumph, however, varies depending on the set of accounting standards being compared to IFRS. Options within IFRS, national tax regulation, cultural differences, different company strategies and country resistance are found to hinder convergence.

Domestic Rhodnius ecuadoriensis (Hemiptera, Reduviidae) infestation in Northern Peru: a comparative trial of detection methods during a six-month follow-up

Two passive methods in the assessment of intradomiciliary infestation by Rhodnius ecuadoriensis were tested: (i) the Gomes Nuñez sensor box (GN), (ii) sheets of white typing paper and (iii) one active timed manual method. The study was carried out in the Alto Chicama River Valley, Province of Gran Chimú, Department of La Libertad. The study design consisted of an initial searching of triatomines inside of the domestic environment by the manual capture active procedure (man/hour) covering all the studied houses. Then, matched pairs of GN boxes and paper sheets were simultaneously installed in the bedrooms of 207 households distributed in 19 localities. A comparative prospective trial of these passive detection devices were monitored at 2, 4 and, finally 6 months follow-up. Parasitological Trypanosoma rangeli and/or T. cruzi infections were investigated in two houses with high level of infestation by R. ecuadoriensis.16.9% of the 207 households investigated by an initial active manual method were infested with R. ecuadoriensis. The proportion of infested houses fluctuated from 6.2 to 55.5% amongst the 19 localities investigated. T. rangeli natural infection was detected in R.ecuadoriensis specimens collected in two households. Parasite rates in the bugs ranged from 16.6 to 21.7% respectively. The most striking fact was an average rate of salivary gland infection ranging from 7.4 to 8.3%. At the end of the sixth month period, a cumulative incidence of 31.4% of positive GN boxes against 15.9% for paper sheets was recorded. All three methods combined detected domestic infestation in 129 (62.3%) of the 207 houses studied in the 19 localities. The range of houses infested varies from 6.7% to 92.9%. In areas with low bug density infestation rates, the methodology experienced in our studies, seems to be the best choice for investigations on domestic R. ecuadoriensis populations.

Effect of different methods of soil preparation on soil moisture loss, weed growth and soil resistance to penetration.

The effect of different methods of soil preparation on soil moisture loss, weed growth and soil resistance to penetration has been quantified for the Latosols of Bebedouro experiment station of CPATSA-EMBRAPA, Petrolina,PE, Brazil. The methods studied are manual preparation, preparation by animal drawn wheeled tool carrier and tractorized implements. The drying characteristics of three fields with different soil physical properties were studied prior to conducting the experiment. The different methods of soil preparation caused the soil moisture loss differently. The plot prepared by animal drawn tool carrier retained more moisture for longer time even at deeper layers. The soil resistance to penetration on the surface increased with time with little variation at deeper layers.

Convergence of gender roles in a globalized world: international comparison of family and gender roles

This paper examines emerging and changing gender roles in different regions of the world. Using data on 12 countries from last three ISSP Special Modules “Family and Changing Gender Roles” (1994, 2002 and 2012), we compare the evolution of gender roles about motherhood and fatherhood and its relation with the extension of women as breadwinners around the world: four Western Europe countries, representatives of different models of Welfare State (Germany, United Kingdom, Norway and Spain) plus United States, three former Soviet nations (Russia, Poland and Czech Republic), two Latin American countries (Chile and Mexico) and two Asian nations (Japan and Taiwan). Data show that family change (measured both in terms of attitudes and social practices) is spreading from Western contexts to other regions of the world, although the pace of this change varies from one country to another, depending on cultural, economic and political factors.

An investigation of imputation methods for discrete databases and multi-variate time series

When it comes to information sets in real life, often pieces of the whole set may not be available. This problem can find its origin in various reasons, describing therefore different patterns. In the literature, this problem is known as Missing Data. This issue can be fixed in various ways, from not taking into consideration incomplete observations, to guessing what those values originally were, or just ignoring the fact that some values are missing. The methods used to estimate missing data are called Imputation Methods. The work presented in this thesis has two main goals. The first one is to determine whether any kind of interactions exists between Missing Data, Imputation Methods and Supervised Classification algorithms, when they are applied together. For this first problem we consider a scenario in which the databases used are discrete, understanding discrete as that it is assumed that there is no relation between observations. These datasets underwent processes involving different combina- tions of the three components mentioned. The outcome showed that the missing data pattern strongly influences the outcome produced by a classifier. Also, in some of the cases, the complex imputation techniques investigated in the thesis were able to obtain better results than simple ones. The second goal of this work is to propose a new imputation strategy, but this time we constrain the specifications of the previous problem to a special kind of datasets, the multivariate Time Series. We designed new imputation techniques for this particular domain, and combined them with some of the contrasted strategies tested in the pre- vious chapter of this thesis. The time series also were subjected to processes involving missing data and imputation to finally propose an overall better imputation method. In the final chapter of this work, a real-world example is presented, describing a wa- ter quality prediction problem. The databases that characterized this problem had their own original latent values, which provides a real-world benchmark to test the algorithms developed in this thesis.

RATE OF CONVERGENCE OF MAXIMUM LIKELIHOOD ESTIMATORS UNDER RELAXED SMOOTHNESS CONDITIONS ON THE LIKELIHOOD FUNCTION

This report reviews literature on the rate of convergence of maximum likelihood estimators and establishes a Central Limit Theorem, which yields an O(1/sqrt(n)) rate of convergence of the maximum likelihood estimator under somewhat relaxed smoothness conditions. These conditions include the existence of a one-sided derivative in θ of the pdf, compared to up to three that are classically required. A verification through simulation is included in the end of the report.

The sensitivity of mapping methods to reference data quality:training supervised image classifications with imperfect reference data

The accuracy of a map is dependent on the reference dataset used in its construction. Classification analyses used in thematic mapping can, for example, be sensitive to a range of sampling and data quality concerns. With particular focus on the latter, the effects of reference data quality on land cover classifications from airborne thematic mapper data are explored. Variations in sampling intensity and effort are highlighted in a dataset that is widely used in mapping and modelling studies; these may need accounting for in analyses. The quality of the labelling in the reference dataset was also a key variable influencing mapping accuracy. Accuracy varied with the amount and nature of mislabelled training cases with the nature of the effects varying between classifiers. The largest impacts on accuracy occurred when mislabelling involved confusion between similar classes. Accuracy was also typically negatively related to the magnitude of mislabelled cases and the support vector machine (SVM), which has been claimed to be relatively insensitive to training data error, was the most sensitive of the set of classifiers investigated, with overall classification accuracy declining by 8% (significant at 95% level of confidence) with the use of a training set containing 20% mislabelled cases.

Design and application of experimental methods for steel sheet shearing

Shearing is the process where sheet metal is mechanically cut between two tools. Various shearing technologies are commonly used in the sheet metal industry, for example, in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material. The constant development of sheet metals toward higher strength and formability leads to increased forces on the shearing equipment and tools. Shearing of new sheet materials imply new suitable shearing parameters. Investigations of the shearing parameters through live tests in the production are expensive and separate experiments are time consuming and requires specialized equipment. Studies involving a large number of parameters and coupled effects are therefore preferably performed by finite element based simulations. Accurate experimental data is still a prerequisite to validate such simulations. There is, however, a shortage of accurate experimental data to validate such simulations. In industrial shearing processes, measured forces are always larger than the actual forces acting on the sheet, due to friction losses. Shearing also generates a force that attempts to separate the two tools with changed shearing conditions through increased clearance between the tools as result. Tool clearance is also the most common shearing parameter to adjust, depending on material grade and sheet thickness, to moderate the required force and to control the final sheared edge geometry. In this work, an experimental procedure that provides a stable tool clearance together with accurate measurements of tool forces and tool displacements, was designed, built and evaluated. Important shearing parameters and demands on the experimental set-up were identified in a sensitivity analysis performed with finite element simulations under the assumption of plane strain. With respect to large tool clearance stability and accurate force measurements, a symmetric experiment with two simultaneous shears and internal balancing of forces attempting to separate the tools was constructed. Steel sheets of different strength levels were sheared using the above mentioned experimental set-up, with various tool clearances, sheet clamping and rake angles. Results showed that tool penetration before fracture decreased with increased material strength. When one side of the sheet was left unclamped and free to move, the required shearing force decreased but instead the force attempting to separate the two tools increased. Further, the maximum shearing force decreased and the rollover increased with increased tool clearance. Digital image correlation was applied to measure strains on the sheet surface. The obtained strain fields, together with a material model, were used to compute the stress state in the sheet. A comparison, up to crack initiation, of these experimental results with corresponding results from finite element simulations in three dimensions and at a plane strain approximation showed that effective strains on the surface are representative also for the bulk material. A simple model was successfully applied to calculate the tool forces in shearing with angled tools from forces measured with parallel tools. These results suggest that, with respect to tool forces, a plane strain approximation is valid also at angled tools, at least for small rake angles. In general terms, this study provide a stable symmetric experimental set-up with internal balancing of lateral forces, for accurate measurements of tool forces, tool displacements, and sheet deformations, to study the effects of important shearing parameters. The results give further insight to the strain and stress conditions at crack initiation during shearing, and can also be used to validate models of the shearing process.

Effects of fishing methods on deep water shark species caught as by-catch off southern Portugal

Deep water sharks are commonly caught as by-catch of longlines targeting bony fishes and trawlers targeting crustaceans in deep water off the southern Portuguese coast. Due to low or no commercial value, these species are most of the times discarded at sea, with only the larger specimens of some species commercialized at very low prices. In this study we present size distributions, maturity distributions, and sex ratios of 2,138 specimens belonging to four different species, namely the lantern sharks Etmopterus pusillus and Etmopterus spinax and the catsharks Galeus melastomus and Galeus atlanticus, caught with these two gears. Trawls generally caught smaller-sized specimens, in a wider length range than longlines. Trawls caught mostly immature specimens of all species, namely 83.7% immature of E. pusillus, 84.3% of E. spinax, 89.5% of G. melastomus, and 95.5% of G. atlanticus, while longlines caught mostly immature E. pusillus (69.2%) and G. melastomus (78.6%) and mostly mature E. spinax (88.2%) and G. atlanticus (87.2%). Trawls tended to catch more males than females of all species except E. spinax, while longlines caught more females than males of E. spinax and G. melastomus and more males than females of the other two species. The main conclusion of this work is that trawls are catching smaller-sized and mostly immature specimens when compared to longlines, meaning that they are probably having a more detrimental effect on these shark populations. The data presented here have significant implications for the conservation of these shark populations since sizes, sexes, and the immature and mature components of the populations are being affected differently by these two fishing gears.