Laser-fired contact optimization in c-Si solar cells

In this work we study the optimization of laser-fired contact (LFC) processing parameters, namely laser power and number of pulses, based on the electrical resistance measurement of an aluminum single LFC point. LFC process has been made through four passivation layers that are typically used in c-Si and mc-Si solar cell fabrication: thermally grown silicon oxide (SiO2), deposited phosphorus-doped amorphous silicon carbide (a-SiCx/H(n)), aluminum oxide (Al2O3) and silicon nitride (SiNx/H) films. Values for the LFC resistance normalized by the laser spot area in the range of 0.65–3 mΩ cm2 have been obtained

A simplified approach to determine aerodynamic damping of railway overheads

The railway overhead (or catenary) is the system of cables responsible for providing electric current to the train. This system has been reported as wind-sensitive (Scanlon et al., 2000), and particularly to the occurrence of galloping phenomena. Galloping phenomena of the railway overhead consists of undamped cable oscillations triggered by aerodynamic forces acting on the contact wire. As is well known, aerodynamic loads on the contact wire depends on the incident flow mean velocity and the angle of attack. The presence of embankments or hills modifies both vertical velocities profiles and angles of attack of the flow (Paiva et al., 2009). The presence of these cross-wind related oscillations can interfere with the safe operation of the railway service (Johnson, 1996). Therefore a correct modelling of the phenomena is required to avoid these unwanted oscillations.

Developing Accessible Mobile Phone Applications: The Case of a Contact Manager and Real Time Text Applications

Mobile phones are becoming increasingly popular and are already the first access technology to information and communication. However, people with disabilities have to face a lot of barriers when using this kind of technology. This paper presents an Accessible Contact Manager and a Real Time Text application, designed to be used by all users with disabilities. Both applications are focused to improve accessibility of mobile phones.

Results of the Technical Validation of an Accessible Contact Manager for Mobile Devices

The apparition of new mobile phones operating systems often leads to a flood of mobile applications rushing into the market without taking into account needs of the most vulnerable users groups: the people with disabilities. The need of accessible applications for mobile is very important especially when it comes to access basic mobile functions such as making calls through a contact manager. This paper presents the technical validation process and results of an Accessible Contact Manager for mobile phones as a part of the evaluation of accessible applications for mobile phones for people with disabilities.

Hydrogen embrittlement risk of high strength galvanized steel in contact with alkaline media

The critical conditions for hydrogenembrittlement (HE) risk of highstrengthgalvanizedsteel (HSGS) wires and tendons exposed to alkaline concrete pore solutions have been evaluated by means of electrochemical and mechanical testing. There is a relationship between the hydrogenembrittlementrisk in HSGS and the length of hydrogen evolution process in alkalinemedia. The galvanizedsteel suffers anodic dissolution simultaneously to the hydrogen evolution which does not stop until the passivation process is completed. HSGS wires exposed to a very highalkalinemedia have showed HE risk with loss in mechanical properties only if long periods with hydrogen evolution process take place with a simultaneous intensive galvanized coating reduction.

Dynamic analysis using finite elements to calculate the critical wear section of the contact wire in suburban railway overhead conductor rails

The purpose of this study is to determine the critical wear levels of the contact wire of the catenary on metropolitan lines. The study has focussed on the zones of contact wire where localised wear is produced, normally associated with the appearance of electric arcs. To this end, a finite element model has been developed to study the dynamics of pantograph-catenary interaction. The model includes a zone of localised wear and a singularity in the contact wire in order to simulate the worst case scenario from the point of view of stresses. In order to consider the different stages in the wire wear process, different depths and widths of the localised wear zone were defined. The results of the dynamic simulations performed for each stage of wear let the area of the minimum resistant section of the contact wire be determined for which stresses are greater than the allowable stress. The maximum tensile stress reached in the contact wire shows a clear sensitivity to the size of the local wear zone, defined by its width and depth. In this way, if the wear measurements taken with an overhead line recording vehicle are analysed, it will be possible to calculate the potential breakage risk of the wire. A strong dependence of the tensile forces of the contact wire has also been observed. These results will allow priorities to be set for replacing the most critical sections of wire, thereby making maintenance much more efficient. The results obtained show that the wire replacement criteria currently borne in mind have turned out to be appropriate, although in some wear scenarios these criteria could be adjusted even more, and so prolong the life cycle of the contact wire.

Dissolution and gettering of iron during contact co-firing

The dissolution and gettering of iron is studied during the final fabrication step of multicrystalline silicon solar cells, the co-firing step, through simulations and experiments. The post-processed interstitial iron concentration is simulated according to the as-grown concentration and distribution of iron within a silicon wafer, both in the presence and absence of the phosphorus emitter, and applying different time-temperature profiles for the firing step. The competing effects of dissolution and gettering during the short annealing process are found to be strongly dependant on the as-grown material quality. Furthermore, increasing the temperature of the firing process leads to a higher dissolution of iron, hardly compensated by the higher diffusivity of impurities. A new defect engineering tool is introduced, the extended co-firing, which could allow an enhanced gettering effect within a small additional time

Análisis biomecánico del segmento de la carrera a pie de la competición en triatlón

El principal objetivo de la presente investigación fue el conocer el perfil de rendimiento técnico de los triatletas, desde un punto de vista biomecánica, en el segmento carrera a pie durante la competición en triatlón. Asimismo, como el genero y el nivel deportivo del triatleta podrían influir en su respuesta motriz durante la competicion. Para ello, se necesitaba desarrollar y validar una técnica experimental que fuera lo suficientemente precisa (validez interna), con una alta fiabilidad y con una gran validez externa (ecologica) debido al entorno de la competicion. La muestra la formaron un total de 64 deportistas: 32 triatletas participantes en la Copa del Mundo de Triatlon de Madrid-2008 (16 hombres y 16 mujeres) y 32 triatletas participantes en el Clasificatorio del Campeonato de Espana Elite (16 hombres y 16 mujeres). El análisis de la técnica de carrera de los deportistas se realizo mediante un sistema fotogramétrico en 2d que permitió calcular las coordenadas (x,y) de los centros articulares con un error de 1.66% en el eje x y de un 2.10% en el eje y. Las imágenes fueron obtenidas por una cámara que filmaba el movimiento en un plano antero-posterior del triatleta. Algoritmos basados en la DLT (Abdel-Aziz & Karara, 1971) permitieron conocer las coordenadas reales a partir de las coordenadas digitalizadas en el plano y posteriormente las distintas variables analizadas. El análisis biomecánica de la carrera se realizo en 4 ocasiones diferentes durante la competición, correspondiendo con cada una de las vueltas de 2,5 km, que el triatleta tenía que realizar. La velocidad de carrera resulto estar íntimamente ligada al nivel deportivo del triatleta. Del mismo modo, 3 de los 4 grupos analizados presentaron valores inferiores a 3 minutos 30 segundos por kilometro recorrido, poniendo de manifiesto el altísimo nivel de los sujetos analizados. Del mismo modo parece que las chicos consiguen una mayor velocidad gracias a una mayor longitud de ciclo en relación a las chicas, ya que estas muestran valores mayores en cuanto a frecuencia de zancada. La frecuencia de zancada presento los valores más altos en la primera vuelta en todos los deportistas analizados. Asimismo, los triatletas de nivel internacional y las chicas fueron los que mostraron los mayores valores. La longitud de zancada presento distintas tendencias en función del nivel y el género del deportista. Así pues, en los deportistas internacionales y en los chicos los mayores valores se encontraron en la primera vuelta mientras que la tendencia fue al descenso, siendo probablemente la fatiga acumulada la causante de dicha tendencia. En cambio, aquellos deportistas de nivel nacional y las chicas mostraron valores mayores en la segunda vuelta que en la primera, evidenciando que además de la fatiga, el ciclismo previo tiene una incidencia directa sobre su rendimiento. Los tiempos de vuelo permanecieron constantes durante toda la carrera, encontrando cierta evolución en los tiempos de apoyo, la cual provoca una modificación en los porcentajes relativos en los tiempos de vuelo. Los tiempos de apoyo más bajos se encontraron en la primera vuelta. Del mismo modo, los deportistas de nivel internacional y los chicos mostraron valores inferiores. También, estos grupos fueron más constantes en sus valores a lo largo de las vueltas. Por el contrario, se encontraron tendencias al aumento en los triatletas de nivel nacional y en las chicas, los cuales no fueron capaces de mantener el mismo rendimiento debido seguramente a su menor nivel deportivo. La oscilación vertical de la cadera se mostro constante en los triatletas de mayor nivel, encontrándose tendencias al aumento en los de menor nivel. Del mismo modo, los valores más altos correspondieron a las chicas y a los deportistas de nivel nacional. La distancia de la cadera al apoyo permaneció constante a lo largo de las vueltas en todos los grupos, obteniéndose valores mayores en los triatletas de nivel internacional y en los chicos. El ángulo de la rodilla apoyada en el momento del despegue no mostro una tendencia clara. Los deportistas de nivel internacional y los chicos presentaron los valores más bajos. El ángulo de la rodilla libre en el momento del despegue mostro una correlación muy alta con la velocidad de carrera. Del mismo modo, los ángulos más pequeños se encontraron en los triatletas internacionales y en los chicos, debido seguramente a los mayores valores de velocidad registrados por ambos grupos. Los ángulos de los tobillos no mostraron ninguna tendencia clara durante la competición analizada. Los cuatro grupos de población presentaron valores similares, por lo que parece que no representan una variable que pueda incidir sobre el rendimiento biomecánica del triatleta. Los resultados obtenidos en el presente estudio de investigación avalan la utilización de la fotogrametría-video en 2d para el análisis de la técnica de carrera durante la competición en triatlón. Su aplicación en una competición de máximo nivel internacional ha posibilitado conocer el perfil técnico que presentan los triatletas a lo largo del segmento de carrera a pie. Del mismo modo, se ha podido demostrar como los estudios realizados en laboratorio no reflejan la realidad competitiva de un triatlón de máximo nivel. The aim of this research was to determine the running technique profile during a triathlon competition from a biomechanical perspective. Also, to analyze the triathlete gender’s and level of performance’s influence on this profile in competition. An accurate (internal validity) and reliable methodology with a high external validity (ecological) had to be developed to get those aims in competition. Sixty-four triathletes were analyzed. 32 (16 males, 16 females) took part in the Madrid 2008 Triathlon World Cup and 32 (16 males and 16 females) took part in the Spanish Triathlon National Championships. The biomechanical analyses were carried out by a photogrammetric system that allow to calculate the landmarks coordinates (x,y) with a 1.66% error in x axis, and a 2.10% error in y axis. The frames were obtained with a camera situated perpendicular to the triathletes’ trajectory, filming the saggittal plane. DLT based algorithms (Abdel-Aziz & Karara, 1971) were used to calculate the real coordinates from the digitalized ones and the final variables afterwards. The biomechanical analisys itself was performed in four different moments during the competition, according to each 2.5 km lap the triathletes had to do. Running speed was highly related to performance level. Also, 3 of the 4 analyzed groups showed speed values under the 3 minutes and 30 seconds per kilometer. It demonstrated the very high performance level of the analized triathletes. Furthermore, it seems that men get higher speeds because their longer stride length, while women shows higher stride frequency values. The highest stride frequency values were found in the first lap. Women and the international level triathletes showed the highest values. Stride length showed different tendencies according to the gender and level of performance. Men and international level triathletes showed the highest level in the first lap and a decreasing tendency after that. The accumulated fatigue was probably the reason of this tendency. On the other hand, higher values than in first lap were found in the second one in women and national level triathletes. It demonstrated the previous cycling can affect to those groups in terms of biomechanics. Flight times remained constant during the running part, while the contact times showed an increasing tendency that caused a variation in flight times percents. The lowest contact times were found in the first lap and in men and international triathletes’ values. Also, these two groups were more consistent during the whole running. On the other hand, increasing tendencies were found in women and national level triathletes, who were not able to maintain the same values probably due to their lower level of performance. Higher level triathletes showed more consistent hip vertical oscillation values than lower level triathletes, who presented increasing tendencies. The highest values were found in women and national level triathletes. The horizontal distance hip-toe cap remained constant among the laps in all the groups. Men and international level triathletes showed the highest values. The support knee angle at toe-off did not show a clear tendency. The lowest values were found in men and international level triathletes. A high correlation was found between the non-support knee angle and the running speed. Furthermore, men and international level triathletes showed the smallest values, due to the higher velocities reached by these two groups. Ankles angles did not show any tendency during the running part. Similar values were found in the four analyzed groups, so this variable does not seem to represent an important one within the triathlete’s performance. The results obtained in the present research support the use of the bidimensional photogrammetric video-system to analyze the running technique during a triathlon competition. Its application in international triathlon meetings has allowed determining the triathletes’ technique profile during the running part. Also, it has been demonstrated the laboratory-based studies does not reproduce a top-level competition.

New reynolds equation for line contact based on the carreau model modification by bair

This paper presents a new form of the one-dimensional Reynolds equation for lubricants whose rheological behaviour follows a modified Carreau rheological model proposed by Bair. The results of the shear stress and flow rate obtained through a new Reynolds–Carreau equation are shown and compared with the results obtained by other researchers.

Defect engineering during the contact co-firing step in an industrial belt furnace

This work implements an optimization of the phosphorus gettering effect during the contact co-firing step by means of both simulations and experiments in an industrial belt furnace. An optimized temperature profile, named ‘extended co-firing step’, is presented. Simulations show that the effect of the short annealing on the final interstitial iron concentration depends strongly on the initial contamination level of the material and that the ‘extended co-firing’ temperature profile can enhance the gettering effect within a small additional time. Experimental results using sister wafers from the same multicrystalline silicon ingot confirm these trends and show the potential of this new defect engineering tool to improve the solar cell efficiency.

Wheel-Rail Contact Forces in High-Speed Simply Supported Bridges at Resonance

The response of high-speed bridges at resonance, particularly under flexural vibrations, constitutes a subject of research for many scientists and engineers at the moment. The topic is of great interest because, as a matter of fact, such kind of behaviour is not unlikely to happen due to the elevated operating speeds of modern rains, which in many cases are equal to or even exceed 300 km/h ( [1,2]). The present paper addresses the subject of the evolution of the wheel-rail contact forces during resonance situations in simply supported bridges. Based on a dimensionless formulation of the equations of motion presented in [4], very similar to the one introduced by Klasztorny and Langer in [3], a parametric study is conducted and the contact forces in realistic situations analysed in detail. The effects of rail and wheel irregularities are not included in the model. The bridge is idealised as an Euler-Bernoulli beam, while the train is simulated by a system consisting of rigid bodies, springs and dampers. The situations such that a severe reduction of the contact force could take place are identified and compared with typical situations in actual bridges. To this end, the simply supported bridge is excited at resonace by means of a theoretical train consisting of 15 equidistant axles. The mechanical characteristics of all axles (unsprung mass, semi-sprung mass, and primary suspension system) are identical. This theoretical train permits the identification of the key parameters having an influence on the wheel-rail contact forces. In addition, a real case of a 17.5 m bridges traversed by the Eurostar train is analysed and checked against the theoretical results. The influence of three fundamental parameters is investigated in great detail: a) the ratio of the fundamental frequency of the bridge and natural frequency of the primary suspension of the vehicle; b) the ratio of the total mass of the bridge and the semi-sprung mass of the vehicle and c) the ratio between the length of the bridge and the characteristic distance between consecutive axles. The main conclusions derived from the investigation are: The wheel-rail contact forces undergo oscillations during the passage of the axles over the bridge. During resonance, these oscillations are more severe for the rear wheels than for the front ones. If denotes the span of a simply supported bridge, and the characteristic distance between consecutive groups of loads, the lower the value of , the greater the oscillations of the contact forces at resonance. For or greater, no likelihood of loss of wheel-rail contact has been detected. The ratio between the frequency of the primary suspension of the vehicle and the fundamental frequency of the bridge is denoted by (frequency ratio), and the ratio of the semi-sprung mass of the vehicle (mass of the bogie) and the total mass of the bridge is denoted by (mass ratio). For any given frequency ratio, the greater the mass ratio, the greater the oscillations of the contact forces at resonance. The oscillations of the contact forces at resonance, and therefore the likelihood of loss of wheel-rail contact, present a minimum for approximately between 0.5 and 1. For lower or higher values of the frequency ratio the oscillations of the contact forces increase. Neglecting the possible effects of torsional vibrations, the metal or composite bridges with a low linear mass have been found to be the ones where the contact forces may suffer the most severe oscillations. If single-track, simply supported, composite or metal bridges were used in high-speed lines, and damping ratios below 1% were expected, the minimum contact forces at resonance could drop to dangerous values. Nevertheless, this kind of structures is very unusual in modern high-speed railway lines.

Study of the effect of different hole sizes on mechanical strength of wafers for back contact solar cells

Drilling process on wafers to produce EWT or MWT solar cells is a critical fabrication step, which affects on their mechanical stability. The amount of damage introduced during drilling process depends on the density of holes, their size and the chemical process applied afterwards. To quantify the relation between size of the holes and reduction of mechanical strength, several sets of wafers have been prepared, with different hole diameter. The mechanical strength of these sets has been measured by the ring on ring bending test, and the stress state in the moment of failure has been deduced by FE simulation.

Damage reduction of the laser drilling process on back contact solar cells by chemical treatment

Production of back contact solar cells requires holes generations on the wafers to keep both positive and negative contacts on the back side of the cell. This drilling process weakens the wafer mechanically due to the presence of the holes and the damage introduced during the process as microcracks. In this study, several chemical processes have been applied to drilled wafers in order to eliminate or reduce the damage generated during this fabrication step. The treatments analyzed are the followings: alkaline etching during 1, 3 and 5 minutes, acid etching for 2 and 4 minutes and texturisation. To determine mechanical strength of the samples a common mechanical study has been carried out testing the samples by the Ring on Ring bending test and obtaining the stress state in the moment of failure by FE simulation. Finally the results obtained for each treatment were fitted to a three parameter Weibull distribution