中国の西部大開発－21世紀の内陸発展戦略

中国は建国（1949年）以来、様々な地域開発戦略を実施してきた。「西部大開発」戦略は、東部沿海地域（以下、東部）と西部内陸地域（以下、西部）の格差を是正し、内陸経済の自律的発展条件を整備することを目指した新たな内陸開発戦略である。本稿では、同戦略が提起されて３年を経過した段階で、その客観的評価を試みる。 まず、同戦略が登場した背景を政治、経済両面から分析し、従来の内陸開発政策の経緯を整理する。次に、執筆時点までに打ち出された具体的施策を整理した上で、西部大開発の直面する課題を検証し、今後の展望を試みる。結論部分では、日本の協力策についても考察を行う。

Yangtze River Delta's system integration: institutional barriers and countermeasures

This paper addresses the issue of institutional barriers to the Yangtze River Delta integration and the resulting slow development. It analyzes the problems including the coordination of local interests and regional interests, market segmentation during the regional integration, competition for the local government‘s investment on the public goods, labor movement within the delta. The paper argues that to reduce the negative impacts of these barriers and to promote the further integration of the Yangtze Delta region, the central government should strengthen the coordination between local governments, regulate their disorderly competition and reform the official evaluation system.

Balancing groundwater conservation and rural livelihoods under water and climate uncertainties: An integrated hydro-economic modeling framework

In arid countries worldwide, social conflicts between irrigation-based human development and the conservation of aquatic ecosystems are widespread and attract many public debates. This research focuses on the analysis of water and agricultural policies aimed at conserving groundwater resources and maintaining rurallivelihoods in a basin in Spain's central arid region. Intensive groundwater mining for irrigation has caused overexploitation of the basin's large aquifer, the degradation of reputed wetlands and has given rise to notable social conflicts over the years. With the aim of tackling the multifaceted socio-ecological interactions of complex water systems, the methodology used in this study consists in a novel integration into a common platform of an economic optimization model and a hydrology model WEAP (Water Evaluation And Planning system). This robust tool is used to analyze the spatial and temporal effects of different water and agricultural policies under different climate scenarios. It permits the prediction of different climate and policy outcomes across farm types (water stress impacts and adaptation), at basin's level (aquifer recovery), and along the policies’ implementation horizon (short and long run). Results show that the region's current quota-based water policies may contribute to reduce water consumption in the farms but will not be able to recover the aquifer and will inflict income losses to the rural communities. This situation would worsen in case of drought. Economies of scale and technology are evidenced as larger farms with cropping diversification and those equipped with modern irrigation will better adapt to water stress conditions. However, the long-term sustainability of the aquifer and the maintenance of rurallivelihoods will be attained only if additional policy measures are put in place such as the control of illegal abstractions and the establishing of a water bank. Within the policy domain, the research contributes to the new sustainable development strategy of the EU by concluding that, in water-scarce regions, effective integration of water and agricultural policies is essential for achieving the water protection objectives of the EU policies. Therefore, the design and enforcement of well-balanced region-specific polices is a major task faced by policy makers for achieving successful water management that will ensure nature protection and human development at tolerable social costs. From a methodological perspective, this research initiative contributes to better address hydrological questions as well as economic and social issues in complex water and human systems. Its integrated vision provides a valuable illustration to inform water policy and management decisions within contexts of water-related conflicts worldwide.

Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.

Model-to-Code transformation from product-line architecture models to aspectJ

Software Product Line Engineering has significant advantages in family-based software development. The common and variable structure for all products of a family is defined through a Product-Line Architecture (PLA) that consists of a common set of reusable components and connectors which can be configured to build the different products. The design of PLA requires solutions for capturing such configuration (variability). The Flexible-PLA Model is a solution that supports the specification of external variability of the PLA configuration, as well as internal variability of components. However, a complete support for product-line development requires translating architecture specifications into code. This complex task needs automation to avoid human error. Since Model-Driven Development allows automatic code generation from models, this paper presents a solution to automatically generate AspectJ code from Flexible-PLA models previously configured to derive specific products. This solution is supported by a modeling framework and validated in a software factory.

MODELOS DE AÇÕES SOLIDÁRIAS: UM EXAME MULTICASO

O presente trabalho, busca compreender como ocorre este processo, denominado Desenvolvimento Comunitário (SOUZA, 1991), percebendo-se seu processo histórico, bem como, sua contemporalidade, nas quais contemplam atributos sociais e coletivos, favoráveis à compreensão e aplicabilidade dos conceitos de solidariedade, no qual fazem parte desta categoria social econômica. Para tanto, propõe um diálogo, entre o referencial teórico abordado no presente trabalho, com os relatos das Histórias de Vidas , desenvolvidos na pesquisa de campo, propiciando uma leitura das práticas solidárias, que possam despertar um novo sentido a comunidade, por meios culturais e da participação coletiva. O método de Pesquisa, utilizado foi a Qualitativa , de caráter Exploratório , e a análise dos dados levantados, se procedeu com inspiração Fenomenológica . A técnica de pesquisa utilizada foi a vivencial, por meio da abordagem de histórias de vida , visando compreender como os sujeitos da pesquisa, representados pela Olho Vivo Cooperativa de Confecções e Costura, da cidade de Santo André e da Associação de Promoção Humana e Resgate da Cidadania Padre Léo Comissari, na cidade de São Bernardo do Campo, em São Paulo, percebem o conceito sobre economia solidária, e qual a existência prática da solidariedade, que facilitam, interferem ou propiciam a geração de trabalho e renda, dentro destas comunidades. A análise dos relatos de vida, destes sujeitos da pesquisa, mostrou que a prática da solidariedade ocorre somente entre moradores em situações de extrema necessidade de sobrevivência, mas precisamente na comunidade da Sacadura Cabral. Percebe-se que esta ajuda mútua, dentro desta comunidade, ocorre de forma voluntária, desagregada da compreensão do termo solidariedade. A responsabilidade social das instituições de ensino Superior da região do ABC Paulista incentivou a criação do Corredor Cultural da Economia Solidária do ABC Paulista, cujo comprometimento com a pesquisa, a responsabilidade social e as práticas pedagógicas de ensino superior, apontam para a necessidade de apoio às comunidades locai, visando principalmente o seu desenvolvimento, por meio de instrumentos de capacitação, que visam à geração de trabalho e renda.(AU)

MODELOS DE AÇÕES SOLIDÁRIAS: UM EXAME MULTICASO

O presente trabalho, busca compreender como ocorre este processo, denominado Desenvolvimento Comunitário (SOUZA, 1991), percebendo-se seu processo histórico, bem como, sua contemporalidade, nas quais contemplam atributos sociais e coletivos, favoráveis à compreensão e aplicabilidade dos conceitos de solidariedade, no qual fazem parte desta categoria social econômica. Para tanto, propõe um diálogo, entre o referencial teórico abordado no presente trabalho, com os relatos das Histórias de Vidas , desenvolvidos na pesquisa de campo, propiciando uma leitura das práticas solidárias, que possam despertar um novo sentido a comunidade, por meios culturais e da participação coletiva. O método de Pesquisa, utilizado foi a Qualitativa , de caráter Exploratório , e a análise dos dados levantados, se procedeu com inspiração Fenomenológica . A técnica de pesquisa utilizada foi a vivencial, por meio da abordagem de histórias de vida , visando compreender como os sujeitos da pesquisa, representados pela Olho Vivo Cooperativa de Confecções e Costura, da cidade de Santo André e da Associação de Promoção Humana e Resgate da Cidadania Padre Léo Comissari, na cidade de São Bernardo do Campo, em São Paulo, percebem o conceito sobre economia solidária, e qual a existência prática da solidariedade, que facilitam, interferem ou propiciam a geração de trabalho e renda, dentro destas comunidades. A análise dos relatos de vida, destes sujeitos da pesquisa, mostrou que a prática da solidariedade ocorre somente entre moradores em situações de extrema necessidade de sobrevivência, mas precisamente na comunidade da Sacadura Cabral. Percebe-se que esta ajuda mútua, dentro desta comunidade, ocorre de forma voluntária, desagregada da compreensão do termo solidariedade. A responsabilidade social das instituições de ensino Superior da região do ABC Paulista incentivou a criação do Corredor Cultural da Economia Solidária do ABC Paulista, cujo comprometimento com a pesquisa, a responsabilidade social e as práticas pedagógicas de ensino superior, apontam para a necessidade de apoio às comunidades locai, visando principalmente o seu desenvolvimento, por meio de instrumentos de capacitação, que visam à geração de trabalho e renda.(AU)

Reacciones comunitarias a la crisis económica y social en España

Introducción. En un contexto de incremento de las desigualdades y de la pobreza en la sociedad española, donde el desmantelamiento del Estado de Bienestar reduce la posibilidad de encontrar recursos e implementar políticas públicas de reducción de estos efectos; la Sociedad Civil y la ciudadanía desarrollan prácticas resilientes orientadas a satisfacer las necesidades de las comunidades más afectadas por el desempleo y el recorte de servicios sociales. Material y métodos. a) Datos secundarios estadísticos procedentes de organismos y fundaciones; y webs de organizaciones resilientes; b) datos primarios producidos a partir de entrevistas y grupos de discusión. Metodología de análisis de contenido y análisis de discurso. Resultados y discusión. las prácticas resilientes como satisfactores de necesidades, son estructuradas a partir de dos dimensiones adaptación/transformación; dependencia/autonomía. Se observa que estas prácticas cuanto más abstracción presentan (de las necesidades concretas relacionadas con la subsistencia, a las necesidades más intangibles relacionadas con cuestiones simbólicas e identitarias), mayor complejidad en su diseño y organización, y mayor potencia como satisfactor.

Capacitación turística en comunidades indígenas. Un caso de Investigación Acción Participativa (IAP)

La literatura académica subraya la importancia de involucrar a la comunidad en los procesos de capacitación turística. Sin embargo, apenas hay reflexiones sobre cómo diseñar e implementar la formación en áreas rurales y remotas. En este trabajo se exponen las cuatro fases de un ciclo de Investigación Acción Participativa (IAP), desarrollada en la Selva Lacandona de México con la colaboración de los grupos originarios lacandones y ch’oles. El objetivo de estudio fue la capacitación humana en las áreas de sistemas turísticos, interpretación del patrimonio natural y cultural, y creación de producto. Todo ello complementado con una capacitación específica para mujeres y jóvenes, grupos tradicionalmente relegados en estas comunidades. El relato de las distintas fases de la IAP nos muestra cómo el conocimiento ancestral es la base para una capacitación turística sólida. La involucración de jóvenes estudiantes en los procesos de formación en comunidades, los formatos adaptados a los contextos locales, y los ejercicios de reciprocidad científica, sirven además para la revitalización cultural, el refuerzo de la autoestima y el desarrollo endógeno de los pueblos indígenas.

Agricultural Credit Market Institutions: A Comparison of Selected European Countries. Factor Markets Working Paper No. 33, January 2013

This paper describes and compares the institutional framework of the agricultural credit markets in selected European countries. The institutions can be both formal (rules, regulations, authorities and actors) and informal (norms, values and relations). They also interact and in situations where the formal institutions are weak, the informal ones increase in importance. The study is based on a questionnaire sent to agricultural financial experts in selected countries. The case studies show that credit regulations are typically general, with no specific regulations for the agricultural credit market. On the other hand, several countries support agricultural credit in various forms, implying that the governments do not perceive the general credit market to function in the case of agricultural firms. In a risk assessment, the most frequent reasons for rejecting a loan application are all linked to economic performance and the situation of the farmer. Personal characteristics, such as educational level or lack of experience, were generally perceived as less influential. Another interesting point when it comes to risk assessment is that in some countries the importance of asset-based lending compared with cash flow-based lending seems to differ when concerning a first-time applicant and when there is an application to extend a loan. To get an idea of the availability of credit, the loan-to-value (LTV) ratio was calculated, and it showed remarkably low values for Poland and Slovakia. For all the countries, the calculated value was lower than what the financial experts would have expected. This might imply credit rationing in agriculture in some of the countries studied. The financial experts all judged the possibility of an agricultural firm obtaining a loan as higher than that for other small rural firms, implying that the latter are also credit-rationed.

A Multiplex Real-Time PCR with High Resolution Melting Analysis for the Characterization of Antimicrobial Resistance in Neisseria gonorrhoeae.

Resistance to antibiotics used against Neisseria gonorrhoeae infections is a major public health concern. Antimicrobial resistance (AMR) testing relies on time-consuming culture-based methods. Development of rapid molecular tests for detecting AMR determinants could provide valuable tools for surveillance, epidemiological studies and to inform individual case management. We developed a fast (<1.5 hrs) SYBR-green based real-time PCR method with high resolution melting (HRM) analysis. One triplex and three duplex reactions included two sequences for N. gonorrhoeae identification and seven determinants of resistance to extended-spectrum cephalosporins (ESCs), azithromycin, ciprofloxacin, and spectinomycin. The method was validated by testing 39 previously fully-characterized N. gonorrhoeae strains, 19 commensal Neisseria spp., and an additional panel of 193 gonococcal isolates. Results were compared with culture-based AMR determination. The assay correctly identified N. gonorrhoeae and the presence or absence of the seven AMR determinants. There was some cross-reactivity with non-gonococcal Neisseria species and the detection limit was 10(3)-10(4) gDNA copies/reaction. Overall, the platform accurately detected resistance to ciprofloxacin (sensitivity and specificity, 100%), ceftriaxone (sensitivity 100%, specificity 90%), cefixime (sensitivity 92%, specificity 94%), azithromycin and spectinomycin (both sensitivity and specificity, 100%). In conclusion, our methodology accurately detects mutations generating resistance to antibiotics used to treat gonorrhea. Low assay sensitivity prevents direct diagnostic testing of clinical specimens but this method can be used to screen collections of gonococcal isolates for AMR more quickly than with current culture-based AMR testing.

Getting ahead collectively : grassroots experiences in Latin America /

[cat;jmn]