Imbibition dynamics of nano-particulate ink-jet drops on micro-porous media

Ink-jet printing of nano-metallic colloidal fluids on to porous media such as coated papers has become a viable method to produce conductive tracks for low-cost, disposable printed electronic devices. However, the formation of well-defined and functional tracks on an absorbing surface is controlled by the drop imbibition dynamics in addition to the well-studied post-impact drop spreading behavior. This study represents the first investigation of the real-time imbibition of ink-jet deposited nano-Cu colloid drops on to coated paper substrates. In addition, the same ink was deposited on to a non-porous polymer surface as a control substrate. By using high-speed video imaging to capture the deposition of ink-jet drops, the time-scales of drop spreading and imbibition were quantified and compared with model predictions. The influences of the coating pore size on the bulk absorption rate and nano-Cu particle distribution have also been studied.

The fish stocks in Uganda aquatic systems: opportunities and challenges for transformation

The status of fish stocks in a water body at any one time is a function of several factors affecting the production of fish in that water body. These include: total number (abundance) and biomass(weight) present, growth (size and age), recruitment (the quantity of fish entering the fishery) including reproduction, mortality which is caused by fishing or natural causes, Other indirect factors of major importance to the status of the stocks include production factors (water quality and availability of natural food for fish), the life history parameters of the different species making up the stocks (e.g. sex ratios, condition of the fish, reproductive potential (i.e. fecundity) etc), Changes in fish stocks do occur when any of the above listed factors directly influence aspects of growth, reproduction and mortality and therefore, numbers and standing stock (biomass). In the exploited fisheries, major research concerns regarding stocks relate to the listed factors especially: estimates of stock abundance/biomass, the quantity of fish being caught,where the fish are caught, which species are caught (relative abundance)when the fish are caught, how the fish are caught. The balance between stock abundance and amount of fish caught provides the basis for intervention. Due to the diverse characteristics of the physical water environment, fishes are in general, not evenly distributed throughout a water body. Shallow and vegetated areas tend to support higher abundance and diversity of fish species. In addition, seasonal variations in fish abundance are so strong that fluctuations in catch have to be expected at fish landings.

Past trends, present stocks and possible future state of the fisheries of the Tanzania part of the Lake Victoria

The Tanzania part of Lake Victoria is the most important single fishery resource for the country. Past fishing practice caused disparity between the relative abundance in the catches and in the available stocks by overfishing some species while under-fishing others. Preliminary studies of distribution pattern, biomass estimates, etc, as derived from bollom trawl exploratory data, and the trend of the commercial catch statistics from 1958 to 1970, suggest that many of the commercially preferred species may not have the biotic potential 10 sustain higher yields under present ecological and fishing regimes. Haplochromis and a few other fish might be the only hope. Geographic extension of fishing to deeper waters may not be very promising as species diversificarion and fish density decline with depth. To develop and manage the fisheries, make full use of the resource and ensure economic and biological perpetuation of thc fishery, the appropriate fishing strategy cannot be properly developcd overnight.

The role of ecological studies in the rational management of fish stocks

Studies on the ecology of freshwaters are basic to the rational development and management of their fisheries. and the relationships between different abiotic and biotic components of aquatic ecosystems are discussed in this paper. Examples are given of the ways in which such studies have been used to establish factors that may limit or increase yields from various Zambian waters.

The increased fishing pressure and the future of the fish stocks of Lake Victoria, Uganda

The Uganda sector of Lake Victoria occupies 29,580 km2 (43%). The lake used to boast of a multi-species fishery but presently relies on three major species Lates niloticus, Oreochromis niloticus and Rastrineobola argentea. During the past decade the total fish production on the Ugandan sector increased drastically from 17,000 tonnes in 1981 to about 13,000 tonnes 1991, indicating a healthy state of the fishery. This was contributed by a combination of factors including the explosive establishment of the introduced L. niloticus which contributed 60.8% in 1991 and the increase in the number of fishing canoes from 3470 in 1988 to 8000 in 1990. Isolated fishery resources studies carried out in different areas of the lake since 1971 seem, however, to indicate contrary trends in the available stocks and, therefore, the status of the fishery. In the experimental fishery, continued decline in catch rates have been recorded. Similarly, in the commercial fishery catch per unit of effort has been considerably poor (33 kg per canoe during January - March 1992) and the average size of individual fish laRded continued to decline, obviously pointing at possible over-fishing. This, therefore, calls for further urgent research on the available stocks for proper management strategies to be formulated.

The future prospects of the fish stocks of Lake Victoria, Uganda

Experimental trawling during the period 1981/86 and analysis of past commercial catch landings, mainly in the northern portion of Lake Victoria have indicated that the standing stocks and therefore, the estimates of sustainable yields of the most important fish species have unquestionably changed since the 1969/71 comprehensive lake-wide stock assessment survey. Lake Victoria which was originally a multi-species fishery now relies on two introduced species (Lates niloticus and Oreochromis niloticus) and one indigenous cyprinid (Rastrineobola argentea). Most of the traditional fish species, including the once dominant haplochromines, have either declined or disappeared. The catch rates in the experimental trawl catches declined from 797 kg/hr in 1969/71 to 575 kg/hr in 1981 and 166 kg/hr in 1985. The contribution of L. niloticus in the trawl catch increased from 0.9% in 1981 to 95.6% in 1985 while the contribution of the haplochromines decreased from about 91% to about 1% over the same period. The mean size of the individual fish caught (particularly the Nile perch) was also on the decline. Similar trends were also observed in the commercial fishery. However, recent observations in the Lake Kyoga commercial fishery that O. niloticus has now surpassed L.niloticus in importance may create more uncertainty regarding the future trends of the fish stocks of Lake Victoria. Inspite of the above situation, developments to increasingly exploit the fish stocks of the lake for export continue to take place. A number of fish processing and/or handling plants have been established in the Jinja, Kampala and Entebbe areas of the lake. Each of these plants is capable of handling upwards of 10 tons of fish a day, the target fish being L. niloticus and O. niloticus.

A note on recent advances in the genetic characterization of tilapia stocks in Lake Victoria region

Oreochromis esculenta, the original "ngege" is virtually extinct in Lake Victoria, and is limited to satellite lakes and reservoirs in the greater Lake Victoria region. Oreochromis variabilis can still be found in Lake Victoria and some satellite lakes in the Kyoga System, but in small numbers and only at a few localities (WANDERA and KAUFMAN, unpub. data). Little is known about the influence that species translocations have had on the genetic structure of these crucial fishery species, and even the source of the parent stocks for the introductions remain obscure. Genetic variability was examined within and among allopatric populations of three species in the tilapiine genus Oreochromis: O. esculentus (endemic to Lakes Victoria and Kyoga), and two exotic species introduced to Lake Victoria in the late 1950's to supplement the failing fisheries for native tilapiines, O. niloticus and O. leucostictus.

Current composition, distribution and relative abundance of the fish stocks of Lake Victoria, Uganda

An experimental bottom trawl survey was carried out in the Uganda sector of Lake Victoria during the period May 1993 through May 1995 with the aim of establishing the current composition, distribution and abundance of the fish stocks. A total of 205 successful one-hour hauls were taken using the 25.4mm mesh size codend trawl net during the 19 cruises. Fourteen fish taxa (excluding the haplochromines) were recorded with Lates niloticus constituting the bulk (97 %) of the fish retained. Haplochromines and L. nilolicus were encountered in all areas sampled while Nile tilapia (Oreochromis niloticus) and other tilapiines were restricted to waters less than 20 metres deep. An average catch of 154 kg/hr was obtained in waters less than 30 metres deep. Species diversity and relative abundance varied with depth. Only two of the fifteen fish taxa (haplochromines and L.niloticus) were recorded in waters deeper than 30 metres and the bulk of the fish by weight (92 %) was obtained in waters less than 30 metres.

Micromachining of glassy carbon toolsets for micro embossing applications

Laser micro machining is fast gaining popularity as a method of fabricating micro scale structures. Lasers have been utilised for micro structuring of metals, ceramics and glass composites and with advances in material science, new materials are being developed for micro/nano products used in medical, optical, and chemical industries. Due to its favourable strength to weight ratio and extreme resistance to chemical attack, glassy carbon is a new material that offers many unique properties for micro devices. The laser machining of SIGRADUR® G grade glassy carbon was characterised using a 1065 nm wavelength Ytterbium doped pulsed fiber laser. The laser system has a selection of 25 preset waveforms with optimised peak powers for different pulsing frequencies. The optics provide spot diameter of 40 μm at the focus. The effect of fluence, transverse overlap and pulsing frequency (as waveform) on glassy carbon was investigated. Depth of removal and surface roughness were measured as machining quality indicators. The damage threshold fluence was determined to be 0.29 J/cm2 using a pulsing frequency of 250 kHz and a pulse width of 18 ns (waveform 3). Ablation rates of 17 < V < 300 μm3/pulse were observed within a fluence range of 0.98 < F < 2.98 J/cm2. For the same fluence variation, 0.6 μm to 6.8 μm deep trenches were machined. Trench widths varied from 29 μm at lower fluence to 47 μm at the higher fluence. Square pockets, 1 mm wide, were machined to understand the surface machining or milling. The depth of removal using both waveform 3 and 5 showed positive correlation with fluence, with waveform 5 causing more removal than waveform 3 for the same fluence. Machined depths varied from less than 1 μm to nearly 40 μm. For transverse overlap variation using waveform 3, the best surface finish with Rz = 1.1 μm was obtained for fluence 0.792 J/cm2 for transverse overlap of 1 μm, 6 μm, and 9 μm at machined depths of 22.9 μm, 6.6 μm, and 4.6 μm respectively. For fluence of 1.426 J/cm2, the best surface finish with Rz = 1.2 μm was obtained for transverse overlap of 6 μm, and 9 μm at machined depths of 12.46 μm, and 8.6 μm respectively. The experimental data was compiled as machining charts and utilised for fabricating a micro-embossing glassy carbon master toolsets as a capability demonstration.

X-ray observation of micro-failures in granular piles approaching an avalanche

An X-ray imaging technique is used to probe the stability of 3-dimensional granular packs in a slowly rotating drum. Well before the surface reaches the avalanche angle, we observe intermittent plastic events associated with collective rearrangements of the grains located in the vicinity of the free surface. The energy released by these discrete events grows as the system approaches the avalanche threshold. By testing various preparation methods, we show that the pre-avalanche dynamics is not solely controlled by the difference between the free surface inclination and the avalanche angle. As a consequence, the measure of the pre-avalanche dynamics is unlikely to serve as a tool for predicting macroscopic avalanches.

Micro-electro-mechanical resonant tilt sensor

This paper reports a micro-electro-mechanical tilt sensor based on resonant sensing principles. The tilt sensor measures orientation by sensing the component of gravitational acceleration along a specified input axis. Design aspects of the tilt sensor are first introduced and a design trade-off between sensitivity, resolution and robustness is addressed. A prototype sensor is microfabricated in a foundry process. The sensor is characterized to validate predictive analytical and FEA models of performance. The prototype is tested over tilt angles ranging over ±90 degrees and the linearity of the sensor is found to be better than 1.4% over the tilt angle range of ±20°. The noise-limited resolution of the sensor is found to be approximately 0.00026 degrees for an integration time of 0.6 seconds. © 2012 IEEE.

Micro-measurement and monitoring system for ageing underground infrastructure (Underground M3)

Advances in the development of computer vision, miniature Micro-Electro-Mechanical Systems (MEMS) and Wireless Sensor Network (WSN) offer intriguing possibilities that can radically alter the paradigms underlying existing methods of condition assessment and monitoring of ageing civil engineering infrastructure. This paper describes some of the outcomes of the European Science Foundation project "Micro-Measurement and Monitoring System for Ageing Underground Infrastructures (Underground M3)". The main aim of the project was to develop a system that uses a tiered approach to monitor the degree and rate of tunnel deterioration. The system comprises of (1) Tier 1: Micro-detection using advances in computer vision and (2) Tier 2: Micro-monitoring and communication using advances in MEMS and WSN. These potentially low-cost technologies will be able to reduce costs associated with end-of-life structures, which is essential to the viability of rehabilitation, repair and reuse. The paper describes the actual deployment and testing of these innovative monitoring tools in tunnels of London Underground, Prague Metro and Barcelona Metro. © 2012 Taylor & Francis Group.

Influence of micro supersonic jets on micro percussion drilling of 316L stainless steel using nanosecond 355NM laser radiation

The interaction phenomena of nanosecond Q-switched diode-pumped solid state (DPSS) laser using 355nm radiation with 0.2mm thick 316L stainless steel foil was investigated at incident laser fluence range of 19 - 82Jcm-2. The characterization study was performed with and without the use of assist gas by utilizing micro supersonic minimum length nozzles (MLN), specifically designed for air at inlet chamber pressure of 8bar. MLN ranged in throat diameters of 200μm, 300μm, and 500μm respectively. Average etch rate per pulse under the influence of three micro supersonic impinging jets, for both oxygen and air showed the average etch rate was reduced when high-speed gas jets were utilized, compared to that without any gas jets, but significant variation was noticed between different jet sizes. Highest etch rate and quality was achieved with the smallest diameter nozzle, suggesting that micro nozzles can produce a viable process route for micro laser cutting.

Comparison of bleed and micro-vortex generator effects on supersonic boundary-layers

An experimental study of bleed and vortex generators in supersonic ow has been conducted. Methods were developed to analyze and directly compare the two systems' effects on turbulent boundary layers to better understand their potential to mitigate ow separation. LDA was used to measure two components of velocity in the boundary-layer for three cases|baseline, with bleed, or with a VG|at Mach numbers of 1.3, 1.5 and 1.8. The bleed system was comprised of a series of 2mm diameter normal holes operated at different suction rates, removing up to 10% of the incoming boundary layer. Three VG shapes were tested only at Mach 1.5 and 1.8. Measurements of the evolution of Hi and Cf downstream of each device indicate that Hi is not an appropriate parameter to gauge the effectiveness of vortex generators due to boundary layer wake distortion. The skin friction coeficient Cf may be a more appropriate measure. Similar increases in Cf were generated by VGs and bleed. The recovery to baseline conditions downstream of bleed was sensitive to Mach number, and more investigation of that effect will be required. Copyright © 2012 by University of Cambridge.