Sol-Gel Alumina Nano Composites for Functional Applications

The thesis entitled "Sol-Gel Alumina Nano Composites for Functional Applications" investigate sol-gel methods of synthesis of alumina nanocomposites special reference to alumina-aluminium titanate and alumina-lanthanum phosphate composites. The functional properties such as thermal expansion coefficient and thermal shock resistance, machinability of composites as well as thermal protection are highlighted in addition to novel approach in synthesis of composites.A general introduction of alumina matrix composites materials, followed by brief coverage of alumina-aluminium titanate and alumina-lanthanum phosphate composites is highlight of the first chapter. The second chapter deals with the sol-gel synthesis of aluminium titanate and alumina-aluminium titanate composite. The synthesis of machinable substrate, based on alumina and lanthanum phosphate forms the basis of the third chapter. The fourth chapter describes the sol-gel coating of mullite on SiC substrate for the possible gas filtration application.

Novel Low Loss A(A1/4 B2/4 C1/4)O3 Dielectrics and Their Applications In Broadband Antennas

This thesis presents the microwave dielectric properties of two novel dielectric resonator materials with the composition Ca(Ca1/4Nb2/4Ti1/4)O3 and Ca(Ca1/4Ta2/4Ti1/4)O3 ceramics and their application in the fabrication of wideband antennas. The microwave dielectric properties of the ceramics were tailored by several techniques such as doping, glass addition and solid solution formations in the complex perovskite A and B-sites with suitable substitutions. Among the wide variety of DRs developed, ceramic resonators with optimum properties were identified to fabricate broadband dielectric resonator loaded microstrip patch antennas. Furthermore, wideband, high permittivity dielectric resonator antennas were fabricated and explored the possibility of tuning their characteristics by modifying the feed line geometries.

Optical and thermal characterization of dye intercalated montmorillonites and rare earth doped materials

The advent of high optical quality transparent nano—structured glasses, the so-called transparent glass ceramics or vitroceramics disclosed the possibility of producing nano-sized photonic devices based on rare-earth doped up—converters. Transparent glass ceramics have been investigated as hosts for lanthanide ions envisioning the production of materials that are easy to shape and with high performance for photonic applications. Rare earth doped glasses have been extensively studied due to their potential applications in optical devices such as solid state lasers and optical fibers. Various photothermal and optical techniques have been successfully applied for the thermal and optical characterization of these rare earth doped materials. In the present thesis, the effective thermal parameters like thermal diffusivity and thermal effusivity of complex materials for various applications have been investigated using photothermal methods along with their optical characterization utilising the common optical absorption as well as fluorescence spectroscopic techniques. These sensitive optical procedures are also essential for exploiting these materials for further photonic applications.

Synthesis, Characterization and Catalytic Activity of Nanocrystalline Ceria Modified With Zirconia

The use of catalysts in chemical and refining processes has increased rapidly since 1945, when oil began to replace coal as the most important industrial raw material. Catalysis has a major impact on the quality of human life as well as economic development. The demand for catalysts is still increasing since catalysis is looked up as a solution to eliminate or replace polluting processes. Metal oxides represent one of the most important and widely employed classes of solid catalysts. Much effort has been spent in the preparation, characterization and application of metal oxides. Recently, great interest has been devoted to the cerium dioxide (CeO2) containing materials due to their broad range of applications in various fields, ranging from catalysis to ceramics, fuel cell technologies, gas sensors, solid state electrolytes, ceramic biomaterials, etc., in addition to the classical application of CeO2 as an additive in the so-called three way catalysts (TWC) for automotive exhaust treatment. Moreover, it can promote water gas shift and steam reforming reactions, favours catalytic activity at the interfacial metal-support sites. The solid solutions of ceria with Group IV transitional-metals deserve particular attention for their applicability in various technologically important catalytic processes. Mesoporous CeO2−ZrO2 solid solutions have been reported to be employed in various reactions which include CO oxidation, soot oxidation, water-gas shift reaction, and so on. Inspired by the unique and promising characteristics of ceria based mixed oxides and solid solutions for various applications, we have selected ceria-zirconia oxides for our studies. The focus of the work is the synthesis and investigation of the structural and catalytic properties of modified and pure ceria-zirconia mixed oxide.

Processability, hardness, andmagnetic properties of rubber ferrite composites containingmanganese zinc ferrites

Rubber ferrite composites have the unique advantage of mouldability, which is not easily obtainable using ceramic magnetic materials. The incorporation of mixed ferrites in appropriate weight ratios into the rubber matrix not only modi es the dielectric properties of the composite but also imparts magnetic properties to it. Mixed ferrites belonging to the series of Mn(1 – x )Znx Fe2O4 have been synthesised with diVerent values of x in steps of 0·2, using conventional ceramic processing techniques. Rubber ferrite composites were prepared by the incorporation of these pre-characterised polycrystallineMn(1 – x )Znx Fe2O4 ceramics into a natural rubber matrix at diVerent loadings according to a speci c recipe. The processability of these elastomers was determined by investigating their cure characteristics. The magnetic properties of the ceramic llers as well as of the rubber ferrite composites were evaluated and the results were correlated. Studies of the magnetic properties of these rubber ferrite composites indicate that the magnetisation increases with loading of the ller without changing the coercive eld. The hardness of these composites shows a steady increase with the loading of the magnetic llers. The evaluation of hardness andmagnetic characteristics indicates that composites with optimummagnetisation and almost minimum stiVness can be achieved with a maximum loading of 120 phr of the ller at x=0·4. From the data on the magnetisation of the composites, a simple relationship connecting the magnetisation of the rubber ferrite composite and the ller was formulated. This can be used to synthesise rubber ferrite composites with predetermined magnetic properties

Dielectric andmechanical properties of rubber ferrite composites

Rubber ferrite composites (RFCs) containing powdered nickel zinc ferrite (Ni1 – xZnxFe2O4 ) in a natural rubber matrix have been prepared and their mechanical and dielectric properties have been evaluated. Variations in the relative permittivity of both the ferrite ceramics and RFCs have been studied over a range of frequencies, ceramic compositions, ceramic ller loadings, and temperatures, and the results have been correlated. Appropriate mixture equations have been formulated to calculate the dielectric permittivity of the composite from the dielectric permittivity of its constituents. Values calculated using these equations have been compared with experimental data on relative permittivity, and the two have been found to be in good agreement. In the present investigationit was also observed that for x=0·4 and for the maximum ferrite loading, the composite sample exhibits maximum magnetisation and optimum exibility

Wirtschaft an der Grenze. Studien zum Wirtschaftsleben in römischen Militärlagern im Norden Britanniens

Die wichtigsten Quellen für die Erforschung des Wirtschaftsleben in den Militärlagern im Norden Britanniens sind die im Kastell Vindolanda gefundenen Holztäfelchen mit Texten aus dem Lageralltag von ca. 90-120 n. Chr. sowie die archäologischen Funde aus der Region. Nicht zuletzt aufgrund dieser Quellenlage wurde der Betrachtungszeitraum auf die Zeit von Agricola bis Hadrianus begrenzt. Es hat sich gezeigt, daß das Wirtschaftsleben in den römischen Militärlagern im Norden Britanniens dieser Epoche einerseits bürokratische Züge trägt, da Führungspersonen in Militär und Verwaltung im Rahmen redistributiver Strukturen viele Güter beschafften, die an die Soldaten gegen Abzüge vom Sold ausgegeben wurden. Andererseits stand diesem Verfahren eine beeindruckende Dynamik im Marktgeschehen gegenüber, die durch die Erfordernisse der Heeresversorgung und des individuellen Konsums der Soldaten entstand. Zu den Bereichen der Wirtschaftstätigkeit, in denen ein starker Einfluß der Bürokratie herrschte, zählten insbesondere die Versorgung mit den Grundnahrungsmitteln (v. a. Getreide, Bier). Hypothesen über ein militärisches Redistributivsystem für Olivenöl unter der Ägide des praefectus annonae wurden allerdings nicht bestätigt. Die Existenz einer zentralen Behörde für die Heeresversorgung im Reich für die Principatszeit nicht nachgewiesen werden. Es zeigte sich statt dessen eine in der Forschung bisher nicht so deutlich gesehene Verantwortung und Aktivität unterer militärischer Entscheidungsträger vor Ort. Die Märkte an der britannischen Grenze bieten eine sehr viel differenzierteres Bild als man es von Handelsplätzen am äußersten Rande der romanisierten Welt vielleicht erwartet hätte. Vor allem zeichneten sie sich durch ein breites Angebot an Waren aus, die über große Entfernungen heran transportiert worden waren (Wein, Oliven, mediterrane Fischcaucen, Pfeffer, Importkeramik). Im Bereich des Handwerks sind im Norden Britanniens durch archäologische Funde und die Tätigkeitsbezeichnungen von Handwerkern in den Texten aus Vindolanda vielfältige Zeugnisse eines Engagements der Militärs präsent.

Grain size analyses in tin-lead glazes based on 2d-sections

A problem in the archaeometric classification of Catalan Renaissance pottery is the fact, that the clay supply of the pottery workshops was centrally organized by guilds, and therefore usually all potters of a single production centre produced chemically similar ceramics. However, analysing the glazes of the ware usually a large number of inclusions in the glaze is found, which reveal technological differences between single workshops. These inclusions have been used by the potters in order to opacify the transparent glaze and to achieve a white background for further decoration. In order to distinguish different technological preparation procedures of the single workshops, at a Scanning Electron Microscope the chemical composition of those inclusions as well as their size in the two-dimensional cut is recorded. Based on the latter, a frequency distribution of the apparent diameters is estimated for each sample and type of inclusion. Following an approach by S.D. Wicksell (1925), it is principally possible to transform the distributions of the apparent 2D-diameters back to those of the true three-dimensional bodies. The applicability of this approach and its practical problems are examined using different ways of kernel density estimation and Monte-Carlo tests of the methodology. Finally, it is tested in how far the obtained frequency distributions can be used to classify the pottery

Terrissa gironina trobada a la Casa de Cultura

Descripció de les peces de terrissa que el museu Arqueològic de Catalunya–Girona guarda de l’antiga Casa de la Misericòrdia i antic Hospici, actualment Casa de Cultura, de Girona. Inclou un breu resum sobre l’edifici

La projecció d'un ideal estètic durant el Noucentisme. Josep Aragay i Blanchar (1889-1973)

"La projecció d'un ideal estètic durant el Noucentisme. Josep Aragay i Blanchar (1889-1973)" es el primer estudi integral dedicat a aquest artista i teòric del Noucentisme. La tesi analitza amb profunditat la trajectòria d’Aragay com a dibuixant, pintor, gravador i ceramista, però també com a poeta, professor i polític; a més del paper que va exercir com a crític, polemista i teòric de l’art. La tesi posa de manifest la labor artística i intel•lectual d’aquest personatge que va assumir, defensar i projectar, fins el final de la seva vida, aquell ideal estètic de signe mediterraneista i classitzant, que sorgia a Catalunya a principis del segle XX.

Els valors límit d'exposició professional i límits biològics per a agents químics en l'àmbit de treball, mesura i control. Evolució de la normativa sobre el plom i la seva incidència sobre els accidents laborals i malalties professionals en la indústria ceràmica

L'objectiu d'aquesta tesi és l'estudi dels valors límit d'exposició professional previstos en la normativa actual com a valors de referència per a l'avaluació i control dels riscos que comporta l'exposició a agents químics presents en el lloc de treball, fonamentalment per inhalació, per protegir la salut dels treballadors. No es pretén realitzar ni un estudi epidemiològic ni un estudi d'higiene, només s'utilitzen els valors d'exposició professional per analitzar el compliment de la normativa sobre la presència de plom en l'ambient de treball, i comprovar si el compliment de la normativa comporta la millora de la salut dels treballadors en funció de la millora de les concentracions de valors ambientals o biològics de l'exposició dels treballadors. La Directiva 98/24/CE deroga les Directives 80/1107/CEE sobre la protecció dels treballadors contra els riscos relacionats amb l'exposició a agents químics, físics i biològics durant el treball, i la Directiva 82/605/CEE, sobre la protecció dels treballadors contra riscos relacionats amb una exposició al plom metàl·lic i als seus compostos iònics durant el treball. S'analitza l'evolució de la normativa sobre la presència d'agents químics en l'ambient de treball, i en concret el plom, i la seva incidència en els accidents laborals i malalties professionals, i el compliment de la normativa al final d'un cicle marcat per l'entrada en vigor de la Directiva 98/24/CE. Per realitzar l'anàlisi anteriorment esmentada s'estudia la indústria ceràmica de les comarques gironines, de la construcció, de l'alimentació i decorativa, a través de les mesures de plom en l'ambient laboral i les mesures de plom en sang dels treballadors d'aquesta indústria des de 1991 a 1996.

Les ceràmiques de producció ibèrica de Sant Julià de Ramis: el poblat i els camps de sitges

The paper analyzes the Iberian ceramics from Sant Julià de Ramis (Girona). The scope of research includes the village itself and other archaeological sites as areas of the Bosc del Congosts silos and Escalers. The research draws several archaeological material dug up in the Iberian site and made in the fields of silos.

A cerâmica e a joalharia : o design como agente de sobrevivência de duas culturas materiais

A Cerâmica nasce da união de três elementos relacionados com a vida do homem – a argila, o fogo e a água – afirmando-se sempre como uma tecnologia criadora de obras ao serviço da comunidade e encarada como um dos primeiros materiais que se relacionaram com a vida e com a morte dos homens “(…) para estes comerem na eternidade” (QUEIRÓS, 1987:21).

Croft Moraig and the chronology of stone circles

The Perthshire stone circle of Croft Moraig was excavated 40 years ago and is usually taken to illustrate the classic sequence at such monuments in Britain. A timber setting, accompanied by a shallow ditch, was replaced by two successive stone settings. The pottery associated with the earliest construction was dated to the Neolithic period. A new analysis of the excavated material suggests that, in fact, the ceramics are Middle or Late Bronze Age. They provide a terminus post quem for at least one of the stone settings on the site. Further study of the evidence suggests an alternative sequence of construction at Croft Moraig, involving a change in the axis of the monument. It seems possible that other stone and timber circles were equally late in date and that their period of use in Britain and Ireland may have been longer than is generally supposed.