991 resultados para Working poor
Resumo:
This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.
Resumo:
AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.
Resumo:
This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.
Resumo:
The main goal of our paper is to provide analytical arguments to explain why Brazil has not been able to restore its long-term capacity for economic growth, especially compared with its economy in the 1950-1979 period (7.3 per cent per year on average) or even with a select number of emerging economies in the 1980-2010 period(6.7 per cent per year on average, against 2.3 per cent per year on average in Brazil in the same period). We build our idea of convention to growth based on the Keynesian concept of convention. For our purposes, this concept could be briefly summarized as the way in which the set of public and private economic decisions related to different objectives, such as how much to produce and invest, how much to charge for products and services, how to finance public and private debt, how to finance research and development, and so on, are indefinitely - or at least until there is no change- carried out by the political, economic and social institutions. This analytical reference can be connected to the Neo-Schumpeterian National Innovation System (NIS) concept, which emphasizes not only institutions associated with science and technology per se, but also the complex interaction among them and other institutions. In this paper we identify two conventions to long-term growth in the last three decades in Brazil: the liberal and the neo-developmental. We show that the poor performance in the Brazilian economy in terms of real GDP growth from the 1980s on can be explained by a weak coordination between short-term macroeconomic policies and long-term industrial and technological policies. This weak coordination, in turn, can be associated with the prevalence of the liberal convention from the 1990s on, which has emphasized price stabilization to the detriment of a neo-developmental strategy whose primary goal is to sustain higher rates of growth and full employment in Brazil.
Resumo:
There has been an increase in the interest in service design, as companies have become more customer-centric and their focus has shifted to customer experiences. The actual organisational purchasing of service design has been given little attention, until recent years. The purpose of this study is to explore the purchasing of service design from the perspectives of sellers (service design agencies) and buying clients (business organisations). In order to understand the phenomenon, also agencies and clients’ approaches to service design discipline, purchasing processes, challenges related to purchasing and ways of facilitating the purchasing are explored. The research follows qualitative research method and utilises abductive reasoning. A proposition framework was formed by combining services marketing, design and organisational buying behaviour literatures, and was tested against real-life business cases. Empirical data was gathered by interviewing eight service design agency representatives and five client representatives in Finland. The results of semi-structural interviews were analysed by finding repetitive themes. The proposition framework was updated according to interview findings. There were both similarities and differences in service design agencies and clients’ approaches to service design. Service design represents a strategic activity to both parties, and it helps in clients’ business development and in discovering opportunities. It is an ideology; a way of thinking and working. The driving force for purchasing service design seemed to be something else than service design itself. Projects have been bought for 1) change and innovation related development, 2) channel related development or for 3) customer experience related development. Seven purchasing challenge themes were recognised: 1) poor or differing service design understanding, 2) selling of service design, 3) varying expectations, 4) difficulty of pre-evaluation, 5) buyers and buying companies, 6) project process and nature and 7) unclear project results. These all can be considered to cause challenges in organisational service design purchasing. Challenges can be caused by either participant, the agency or the client, and take place at any point of the purchasing process. Some of the challenges could be considered as barriers to purchasing or they play a role in an unsuccessful service project – and therefore, result in an unsuccessful organisational purchase. Purchasing could be facilitated in various ways by either participant; some ways are more attitude based, others actionable improvements. Thesis’s theoretical and managerial findings can be utilised to both improve the selling and purchasing of service design services.
Resumo:
Unexpected changes in cash flow have started to occur more frequently after the financial crisis. The capital structures of companies have also changed, and financial flexibility as well as flexible asset management have therefore become more important. This thesis aims at presenting financial working capital management, a part of flexible asset management, as a possibility to gain financial flexibility and survive the changes. This thesis operates in the interface of corporate finance, strategic management and management accounting, and it has two main objectives: to examine financial working capital management and to develop measures of financial working capital. The research in this thesis has been conducted using archival research and design science. Qualitative comparative analysis and model building are used to formulate tools and strategies for financial working capital management. The tools are tested with simulations, case studies and statistical analysis. The empirical data is collected from companies listed in the Helsinki Stock Exchange. The results of this thesis indicate that there are several possible financial working capital management strategies. FOCAL matrix is created in the thesis to assist in the selection of a strategy. The results also imply that profitability can be improved by reducing financial working capital, which creates a need to change the financial working capital management strategy. Financial flow cycle, and its modification, is developed in this thesis to measure financial working capital. Financial working capital as a concept is presented in this thesis with an orientation towards the management view. New dimensions have also been produced to financial management and working capital management, while providing a holistic approach to financial flexibility. Financial working capital management strategies are presented to managers and practical tools are provided for decision-making.
Resumo:
The main aim of this research was to develop cost of poor quality calculation model which will better reflect business impacts of lost productivity caused by IT incidents for the case company. This objective was pursued by reviewing literature and conducting a study in a Finnish multinational manufacturing company. Broad analysis of the scientific literature allowed to identify main theories and models of Cost of Poor Quality and provided better base for development of measurements of business impacts of lost productivity. Empirical data was gathered with semi-structured interviews and internet based survey. In total, twelve interviews with experts and 39 survey results from business stakeholders were gathered. Main results of empirical study helped to develop the measurement model of cost of poor quality and it was tied to incident priority matrix. Nevertheless, the model was created based on available data. Main conclusions of the thesis were that cost of poor quality measurements could be even further improved if additional data points could be used. New model takes into consideration different cost regions and utilizes on this notion.
Resumo:
This study discusses the importance of internal communication during organizational change of a case study company X. The purpose of this study is to find out how to use internal communication effectively during organizational change. This study is an ethnographic cade study where a unique case of an organizational change was chosen as the research object. The theoretical background of this study consists of literature relating to the concepts of communication, organizational communication, organizational change, change management and communication of change. The empirical research conducted for this study is based on an ethnographic research method where data was collected through participant observation, informal interviews and field records in the form of a research diary. The research data was collected between September and December 2015. During this period the researcher was working within the case study organization while observing the internal communication during the organizational change process. Triangulation was used to analyze the research data in order to build a united and theoretical picture of the topic. The study finds that without clear internal communication strategy the effectiveness of communication is ought to be poor, which may lead to resistance of change, lack of trust and lower level of overall job satisfaction. Moreover the study findings highlight the importance of managerial presence during an organizational change process and consistency in using formal and informal communication and utilizing multiple communication channels. Based on the findings of this research the study suggests that during an organizational change process a clear internal communication strategy should be carefully planned and executed. The goals of internal communication should be clearly stated and communicated to the company’s employees. The findings of this study enhance importance of managers promoting sense of belonging, developing awareness of the overall change process and contributing to the manager employee relationships and trust. In addition this study points out the key factors that should be included in the internal change communication strategy which are how to ensure that the communications, both vertical and horizontal, are constant. Future research is however necessary in order to gain a more comprehensive view of the research and wider perspective of the case study. Nevertheless, this study deepens the understanding of how to use internal communication effectively during organizational change.
Resumo:
The ability to learn new reading vocabulary was assessed in 30 grade 3 poor readers reading approximately one to two years below grade level; the results of the assessment were compared to the performance abilities of 33 normal readers in grade 3 as obtained from an earlier study that employed the same approach and stimuli. The purpose of the study was to examine the strategies employed by poor readers in the acquisition of new reading vocabulary. Students were randomly assigned to either a treatment group (Mixed Phonics Explicit), or to a control group (Phonics Implicit). Subjects in the Mixed Phonics Explicit groups received explicit letter/sound correspondence training. Subjects in the Phonics Implicit group were asked to re-read the presented pseudo-words, receiving corrective feedback when necessary. The stimuli on which the subjects were trained involved a list of six pseudo-words presented in sentences as surnames. The training involved a teaching and test format on each trial for a total of six trials or until criterion had been reached. The results suggested that both normal and poor readers engage in visual learning and verbal coding when acquiring new reading vocabulary. However, poor readers appear to engage in less verbal coding than normal readers. Between group comparisons showed no difference between poor and normal readers in trials and errors to criterion in the visual recognition memory measure. However, normal readers performed significantly better in reading their visual recognition choices.
Resumo:
Fluid inteliigence has been defined as an innate ability to reason which is measured commonly by the Raven's Progressive Matrices (RPM). Individual differences in fluid intelligence are currently explained by the Cascade model (Fry & Hale, 1996) and the Controlled Attention hypothesis (Engle, Kane, & Tuholski, 1999; Kane & Engle, 2002). The first theory is based on a complex relation among age, speed, and working memory which is described as a Cascade. The alternative to this theory, the Controlled Attention hypothesis, is based on the proposition that it is the executive attention component of working memory that explains performance on fluid intelligence tests. The first goal of this study was to examine whether the Cascade model is consistent within the visuo-spatial and verbal-numerical modalities. The second goal was to examine whether the executive attention component ofworking memory accounts for the relation between working memory and fluid intelligence. Two hundred and six undergraduate students between the ages of 18 and 28 completed a battery of cognitive tests selected to measure processing speed, working memory, and controlled attention which were selected from two cognitive modalities, verbalnumerical and visuo-spatial. These were used to predict performance on two standard measures of fluid intelligence: the Raven's Progressive Matrices (RPM) and the Shipley Institute of Living Scales (SILS) subtests. Multiple regression and Structural Equation Modeling (SEM) were used to test the Cascade model and to determine the independent and joint effects of controlled attention and working memory on general fluid intelligence. Among the processing speed measures only spatial scan was related to the RPM. No other significant relations were observed between processing speed and fluid intelligence. As 1 a construct, working memory was related to the fluid intelligence tests. Consistent with the predictions for the RPM there was support for the Cascade model within the visuo-spatial modality but not within the verbal-numerical modality. There was no support for the Cascade model with respect to the SILS tests. SEM revealed that there was a direct path between controlled attention and RPM and between working memory and RPM. However, a significant path between set switching and RPM explained the relation between controlled attention and RPM. The prediction that controlled attention mediated the relation between working memory and RPM was therefore not supported. The findings support the view that the Cascade model may not adequately explain individual differences in fluid intelligence and this may be due to the differential relations observed between working memory and fluid intelligence across different modalities. The findings also show that working memory is not a domain-general construct and as a result its relation with fluid intelligence may be dependent on the nature of the working memory modality.
Resumo:
This research acknowledges the difficulties experienced by teachers presenting integrated arts curricula. Instructional support is offered by arts organizations that provide arts partnerships with local schools boards. The study focuses on the experiences of 8 teachers from a Catholic school board in southern Ontario who participated in integrated arts programs offered by The Royal Conservatory of Music's Learning Through the Arts™ (LTTATM) program and a local art gallery's Art Based Integrated Learning (ABIL) program and examines their responses to the programs and their perception of personal and professional development through this association. Additionally, questions were posed to the . "aftisfs"from-tneSe]Jfograrrrs;-and"they liiscus·sed·how"participating in-collaboration with teachers in the development of in-school programs enabled them to experience personal and professional development as well. Seven themes emerged from the data. These themes included: teachers' feelings of a lack of preparedness to teach the arts; the value of the arts and arts partnerships in schools; the role of the artists in the education of teachers; professional development for both teachers and artists; the development of collegiality; perceptions of student engagement; and the benefits and obstacles of integrating the arts into the curriculum. This document highlights the benefits to both teachers and artists of arts partnerships between schools and outside arts organizations.
Resumo:
The purpose of this qualitative study was to understand the relationships between creativity and the working artist/teacher employed by an art college. The topic emerged from my job as an instructor at The Ontario College of Art which was used as the primary data resource and provided the highest caliber of professionals to chose from. Existent data were used to facilitate the study generated by the research of Cawelti, Rappaport, and Wood (1992). The data were generated by a group of 5 faculty members from The University of Northern Iowa, recognized for their expertise in the arts (a painter, a poet, a sculptor, a novelist, and a photographer). They were asked to respond to the following statement: "In as much detail as you like, list the things that you did, thought, or felt the last time you created an artistic product. II Cawelti, Rappaport, and Wood (1992) produced three models of the creative process, each building on the previous, with the resultant third,being in my opinion, an excellent illustration (text/visual) of the creative process. Model three (Appendix D) presented a "multi-dimensional view of the creative process: time, space, observatility, and consciousnessll (p. 90). Model three utilized a visual mapping device along the bottom of the page linked to text segments above. Both the visual and the text were interrelated so that they harmonized into a comprehensive "picture." The parti'cipants of this qualitative study were asked to consider model three from their professional perspective as artist/teachers. The interpretive sciences directed the methodology. The hermeneutic circle of continuous reflection from the whole to the part and back to the whole was an important aspect of the data analyses. Four members of the Foundation Department at The Ontario College of Art were the key participants. A series of conversational interviews was the primary source of data collection, this was augmented by observation, fie,ldnotes, and follow up telephone interviews. Transcripts of interviews were returned to participants for reflection and the telephone was used to discuss any additional -points raised. Analysis consisted of coding and organizing data according to emerging themes. These themes formed the basis for the narrative stories. The text of the narrative stories were given back to each participant for further comment. Revisions were made until both the researcher and the participants felt that the stories reflected reality. The resultant whole was critiqued from the researcher's perspective. The significance of this study was discussed as it pertains to the working artist/teacher and areas in need of further study are pointed out.