Generalization of the delta-differential autotransformer for 12 and 18-pulse converters

This work proposes a methodology to generalize the A-connections for 12 and 18-pulse autotransformers. A single mathematical expression, obtained through simple trigonometric operations, represents all the connections. The proposed methodology allows choosing any ratio between the input and the output voltages. The converters can operate either as step-up or as step-down voltage. To simplify the design of the windings, graphics are generated to calculate the turn-ratio and the polarity of each secondary winding, with respect to the primary winding. A design example, followed by digital simulations, and experimental results illustrate the presented steps. The results also show that high power factor is an inherent characteristic of multi-pulse converters, without any active or passive power factor pre-regulators needs.

A 12 kW three-phase low THD rectifier with high-frequency isolation and regulated DC output

A robust 12 kW rectifier with low THD in the line currents, based on an 18-pulse transformer arrangement with reduced kVA capacities followed by a high-frequency isolation stage is presented in this work. Three full-bridge (buck-based) converters are used to allow galvanic isolation and to balance the dc-link currents, without current sensing or current controller. The topology provides a regulated dc output with a very simple and well-known control strategy and natural three-phase power factor correction. The phase-shift PWM technique, with zero-voltage switching is used for the high-frequency dc-dc stage. Analytical results from Fourier analysis of winding currents and the vector diagram of winding voltages are presented. Experimental results from a 12 kW prototype are shown in the paper to verify the efficiency, robustness and simplicity of the command circuitry to the proposed concept.

Effect of mechanical loading on the I-c degradation behavior of Bi-2223 tapes

During the winding process of HTS coils the tapes of Bi-2223 are subjected to the influence of bending strain, axial strain, compressive force and torsional deformation resulting in I-c degradation. In the literature the effects of the individual strain components are separately analyzed in spite of during coil winding and energizing the strain-stress effects are combined. In this work using commercial tapes of Bi-2223 Ag/AgMg with and without stainless steel reinforcement several samples were wound on cylindrical FRP G-10 holder in which different combined strains are applied. Measurements of I - V characteristic curves are done to determine the degree of critical current degradation and the operational limits. The results are compared with the I, values of short samples and other specimens subjected to deformation generated by loading types such as tensile and bending strain.

Thermotectonic and fault dynamic analysis of Precambrian basement and tectonic constraints with the Parana basin

The Precambrian crystalline basement of southeast Brazil is affected by many Phanerozoic reactivations of shear zones that developed during the end of the Neoproterozoic in the Brasiliano orogeny. These reactivations with specific tectonic events, a multidisciplinary study was done, involving geology, paleostress, and structural analysis of faults, associated with apatite fission track methods along the northeastern border of the Parana basin in southeast Brazil.The results show that the study area consists of three main tectonic domains, which record different episodes of uplift and reactivation of faults. These faults were brittle in character and resulted in multiple generations of fault products as pseudotachylytes and ultracataclasites, foliated cataclasites and fault gouges.Based on geological evidence and fission track data, an uplift of basement rocks and related tectonic subsidence with consequent deposition in the Parana basin were modeled.The reactivations of the basement record successive uplift events during the Phanerozoic dated via corrected fission track ages, at 387 +/- 50 Ma (Ordovician); 193 +/- 19 Ma (Triassic); 142 +/- 18 Ma (Jurassic), 126 +/- 11 Ma (Early Cretaceous); 89 +/- 10 Ma (Late Cretaceous) and 69 +/- 10 Ma (Late Cretaceous). These results indicate differential uplift of tectonic domains of basement units, probably related to Parana basin subsidence. Six major sedimentary units (supersequences) that have been deposited with their bounding unconformities, seem to have a close relationship with the orogenic events during the evolution of southwestern Gondwana. (c) 2005 Elsevier Ltd. All rights reserved.

Diamondiferous deposits in the Jequitai area (Minas Gerais, Brazil): a consequence of neotectonic processes

Diamonds obtained from small scale mining near Jequitai and surrounding villages are extracted from Tertiary conglomerates and Quaternary gravels of the Rio Jequitai. Eocretaceous conglomerates, which are locally poorly diamondiferous, cover parts of the Serra da Agua Fria and Serra do Cabral. They are of no economic importance. Analyses of neotectonic, post-Miocene features support a transpressive regime that gave rise to N-S to N25° E transcurrent faults, and WNW normal faults. The main evidence for neotectonic processes are inclined Tertiary sediments, drainage captures, striated laterites of Miocene age, and tilting of blocks that form the Rio Jequitai graben. Diamonds in the Tertiary terraces derived from the Eocretaceous conglomerates, which were affected by neotectonic processes, followed by erosion and concentration during redeposition of sediments.

Optimized Allocation of Control and Protective Devices in Electric Distribution Systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The dielectric suppress and the control of semiconductor non-Ohmic feature of CaCu3Ti4O12 by means of tin doping

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Araguaia fold belt, Brazil: A reactivated Brasiliano-Pan-African cycle (550 Ma) geosuture

The Araguaia-Tocantins geosuture, which separates the Araguaia Fold Belt (AFB) from the Archean Amazonian Craton, was active in the late Middle Proterozoic. The Baixo Araguaia Supergroup was deposited, consisting of the Estrondo Group (lower quartzites with intercalated schists), Xambioá Formation (schists), and Canto da Vazante Formation (upper feldspathic schists); and the Tocantins Group consisting of the Couto Magalhaës Formation (phyllites, quartzites, slates, limestones, and metacherts) and Pequizeiro Formation (upper chlorite schists); and associated mafic-ultramafic bodies. The deformational history includes four regional phases of deformation within this supracrustal sequence: recumbent folds with vergence to the west; refolding with a N-S trend; an intense crenulation episode; and late thrusting from east to west. Metamorphism is of intermediate or intermediate-high pressure type with garnet, biotite, chlorite, and sericite isograds succeeded by a slightly or non-metamorphosed zone, from east to west. Rocks surrounding sparse gneissic-cored domes contain isograds of staurolite, kyanite, and fibrolite. These isograds are believed to be associated with the 1100 Ma Uruaçuano event. The Brasiliano Orogeny strongly affected the AFB with displacements due to transcurrent reactivation of great and old faults of the basement, slight folding in the supracrustal sequence, intrusion of small granite bodies, and development of domes with associated normal faults. The area underlain by the Estrondo Group was uplifted at this time, causing the deposition of the Rio das Barreiras polymictic conglomerate of the central area. K-Ar and Rb-Sr analyses date this thermo-tectonic event at 550 ± 100 Ma. The Archean basement is exposed in the cores of domes as a granite-gneiss association, the Colméia complex, which shows thermo-tectonic features that may be interpreted as polycyclic imprints (Jequié, Transamazonian?, Uruaçuano, and Brasiliano Events). © 1989.

Tectonica do Complexo Varginha na regiao de Sao Joao da Boa Vista (SP)

Migmatites, high-grade gneisses and granitoids represent the most important Precambrian rocks of Sao Joao da Boa Vista region. Structures are interpreted as due to low-angle oblique non-coaxial ductile shear, developed under conditions of amphibolite facies. Transcurrent ductile shear zones and associated drags modify the foliation and lineations orientations. A first phase of migmatization related to anatexis seems to be developed before or early during the thermo-tectonic process. A second one is syntectonic, and represents the main regional phase. Joints and faults represent the brittle features, the faults marked by cataclastic rocks and intense retrometamorphism along the main zones. -from English summary

O grupo natividade e sua correlacao com o grupo bambui

The Natividade Group is a metasedimentary sequence discontinuously exposed in the southeastern region of the Tocantins State. It rests unconformably on the Archean gneissic-granitoid complex and its associated supracrustals, as well as on granite intrusives of the Lajeado Suite (1.870 Ma). It is unconformably covered by the Monte do Carmo Formation and the Serra Grande Formation. The sequence is preserved on tilted blocks and grabens. The western portion is constituted of only detritic metasediments. The intermediate outcrops presents detritic and some carbonatic metasediments. A carbonatic sequence, with some detritic levels, is recognized at the eastern area. The sections of these different domains are interpreted as constituted of fining-up sequences due to three transgressive episodes into an ensialic paleobasin, with uplifted border to the western side and a carbonate platform to the east, which represents the western extension of the Mambui Group. The Natividade Group presents folds with variable styles and no defined vergence, which are synchronous to the regional metamorphism (lower to upper greenschist facies). Two groups of faults cut the sequence. -from English summary

Electric power systems transient stability analysis by neural networks

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Middle Proterozoic vein-hosted gold deposits in the Pontes e Lacerda region, southwestern Amazonian craton, Brazil

Structural, geochemical, and isotope studies were carried out on the gold deposits of the Pontes e Lacerda region (Mato Grosso state, Brazil), where rocks of the Aguapei and Rondoniano mobile belts (southwestern Amazonian craton) occur. The orebodies are hosted in metavolcanic, gneiss-granite, quartzite, tonalite, and granite units. Tectonics involve oblique overthrusting (from northeast to southwest), which led to the formation of recumbent folds and thrusts (pathways for the mineralizing fluids), upright folds, and faults with dominant strike-slip component. These unconformities represent potential sites for mineralization. During geological mapping, it was observed that the orebodies consist of quartz, pyrite, and gold, and that the hydrothermal alteration zone contains quartz, sericite, pyrite (altered to limonite), and magnetite (altered to hematite). Chalcopyrite, galena, and sphalerite occur only in the Onça deposit. Chemical analysis of sulfides indicates high contents of Bi, Se, and Te in sulfides and gold, suggesting plutonic involvement in the origin of hydrothermal solutions. K-Ar dating of hydrothermal sericites from gold veins yielded ages in the range from 960 to 840 Ma, which may indicate the age of original crystallization of sericite. Pb-Pb dating in galenas yielded model ages in the range from 1000 to 800 Ma for the Onça deposit, which is in agreement with K-Ar ages. Pb-isotopic ratios indicate high U/Pb and low Th/Pb for the upper-crustal Pb source before incorporation in galena crystals. The Pontes e Lacerda gold deposits yielded ages correlated to the Aguapei event and probably were formed during a Proterozoic contractional tectonic period in the southwestern part of the Amazon craton, which may characterize an important metallogenic epoch in the Pontes e Lacerda region.

Well-conditioned robust observer for detection of faulty systems components

A new concept of fault detection and isolation using robust observation for systems with random noises is presented. The method selects the parameters from components that may fault during the process and constructs well conditioned robust observers, considering sensors faults. To isolate component failures via robust observation, a bank of detection observers is constructed, where each observer is only sensitive to one specified component failure while robust to all other component failures.

Geochemical Variability of the Rapakivi Itu Province, State of São Paulo, SE Brazil

This paper describes the chemical variability of the Late Precambrian Itu Rapakivi Province (IRP), State of São Paulo, SE Brazil, based on 187 selected analyses from the Itu, São Francisco, Sorocaba, Campina do Veado and Sguario/ Correa granites. The IRP has an almost uniform petrographic character conferred by the overall dominance of subalkaline biotite granites. Monzogranites (adamellites), granodiorites, quartz syenites, quartz monzonites are rare to very rare rock types and tonalites and quartz diorites are almost restricted to enclaves. Typical chemical features are the high FeO*/MgO ratio, a clustering of the K2O values between 4.5 and 6.0 wt.% and K2O/Na2O ratios which define the IRP as mildly potassic although more potassic rocks also occur. The overal Peacock Alkalinity Index is 54 defining the Province as alkali-calcic. In the Shand diagram the data cluster near the metaluminous/peraluminous boundary. Relationships between Nb, Rb and Y stress the within plate character of the IRP and the relationships between Rb, Ba and Sr reveal the importance of feldspar fractionation in magma evolution. The data also show an interbody and an intrabody chemical variability due to the variation in the composition of the crustal magma protoliths, as assigned by K/Rb relations. The presence of several magmatic cycles which built up the major intrusions reflects a magma ascent from collecting chambers successively drained and recharged, a feature in agreement with the clear link between the bodies and long lived, successively reactivated, transcurrent faults. Most of the chemical features of the IRP correspond to those of the classical Finnish rapakivi granites.

Seqüência Ordovício-Siluriana e Devoniana no Flanco Norte da Bacia do Paraná

Two stratigraphic sequences characterize the basal units of the Paraná basin. The Ordovician-Silurian sequence overlie directly the Neoproterozoic basement and consists of a 55m-thick unit of coarse-grained sandstones, diamictites, fossiliferous shales and fine-grained micaceous sandstones. The Alto Garças Formation constitutes the base of the sequence and is made of coarse-grained, massive and reddish sandstones associated with conglomeratic lenses. Diamictites with pebbles of diverse composition in siltic and arenaceous matrix were deposited during the Ordovician-Silurian glaciation. Whenever the basal sandstones are absent, the diamictites directly overlie the basement. The diamictites were previously included in the Vila Maria Formation. However our study revealed that they are part of the Iapó Formation. A transgressive event following the glaciation is marked by the deposition of the Vila Maria Formation, which is characterized by fossiliferous (mollusks, brachiopods, cryptospores and microplankton) and laminated shales and siltstones, grading upward to fine-grained micaceous sandstones with hummocky cross stratification. Layers containing trace fossils (Anthrophycus) occur at the transition between the siltstones and the sandstones. The Devonian sequence is represented by 80-170 meters thick sandstones of the Furnas Formation (lower unit) and a sucession of sandstones, siltstones and shales of the Ponta Grossa Formation (upper unit). Unlike other areas of the Paraná Basin, the Ponta Grossa Formation is characterized by coarsening-upward succession beginning with fine sandstones and grading upward to coarse and very-coarse sandstone beds. Cretaceous modifying tectonics affected the Paleozoic sequences, which are cut by a series of faults, in some cases showing displacements greater than 500 meters.