Analytical and semi-analytical analysis of an artificial satellite's rotational motion

The rotational motion of an artificial satellite is studied by considering torques produced by gravity gradient and direct solar radiation pressure. A satellite of circular cylinder shape is considered here, and Andoyers variables are used to describe the rotational motion. Expressions for direct solar radiation torque are derived. When the earth's shadow is not considered, an analytical solution is obtained using Lagrange's method of variation of parameters. A semi-analytical procedure is proposed to predict the satellite's attitude under the influence of the earth's shadow. The analytical solution shows that angular variables are linear and periodic functions of time while their conjugates suffer only periodic variations. When compared, numerical and analytical solutions have a good agreement during the time range considered.

Adsorption of Cu(II) and Co(II) complexes on a silica gel surface chemically modified with 2-mercaptoimidazole

The isotherms of adsorption of MeX2 (Me = Cu2+, Co2+; X = Cl-, Br-, ClO4-) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 degrees C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX2 from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu2+ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO4)(2) complex, the peak of absorption did not change for any degree of metal loading and for Cl- and Br- complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX2(X = Cl-, Br-, ClO4-) analogues possess a distorted-tetrahedral field.

Preparation, characterization, and CuX2 and CoX2 (X = Cl-, Br-, ClO4-) adsorption behavior of a polyhedral oligomer silsesquioxane functionalized with an organic base

In this paper we report on the synthesis, characterization, and adsorption properties of the first 3-amino-1,2,4-triazole-modified porous silsesquioxane (ATPS). The isotherms of adsorption of MX2 (M = Cu(II), Co(II); X = Cl-, Br-, ClO4-) by ATPS were studied in ethanol and aqueous solutions at 298 K. The results showed that there is a good fit between the experimental data and the Langmuir isotherm. The adsorption capacity in both solvents followed the sequence Cu(II) >> Co(II). The lowest adsorption for Co(II) should be related to the largest hydration volume, which obstructs the adsorption capacity of the surface, and consequently causes a decrease in the number of cations adsorbed. For the salts with different anions the sequence was MCl2 > MBr2 > M(ClO4)2 in both solvents. The low affinity for M(ClO4)(2) toward the solid phase is a consequence of the poorer coordination ability of the ClO4-. Adsorptions from ethanol solutions were higher than those from aqueous solutions due to the higher polarity of water, which can more strongly solvate the solute and the basic sites on the surface. The following adsorption capacities (in mmol g(-1)) were determined: 0.24 (aq) and 0.84 (eth) for CuCl2, 0.09 (aq) and 0.16 (eth) for CuBr2, and 0.08 (aq) and 0.11 (eth) for Cu(ClO4)(2); 0.02 (aq) and 0.07 (eth) for CoCl2, 0.02 (aq) and 0.06 (eth) for CoBr2, and 0.01 (aq) and 0.05 (eth) for Co(ClO4)(2). (c) 2007 Elsevier B.V. All rights reserved.

Adsorption of copper(II) and cobalt(II) complexes on a silica gel surface chemically modified with 3-amino-1,2,4-triazole

The isotherms of adsorption of MX2 (M = Cu2+, Co2+; X = Cl-, Br-, ClO4) by silica gel chemically modified with 3-amino-1,2,4-triazole (SiATR) were studied in acetone and ethanol solutions, at 25 degrees C. The 3-amino-1,2,4-triazole molecule, covalently bound to the silica gel surface, adsorbs MX2 from solvent by forming a surface complex. At low loading, the electronic and electron spin resonance spectral parameters indicated that the Cu2+ complexes have distorted tetragonal symmetry. The CoX2 (X = Cl-, Br-) analogues exhibit a distorted-tetrahedral geometry, whilstthe (SiATR)mCo)ClO4)(2) complex has a tetragonally distorted octahedral geometry, with four equatorial nitrogen atoms around the cobalt. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Approach combining on-line metal exchange and tangential-flow ultrafiltration for in-situ characterization of metal species in humic hydrocolloids

This paper deals with the development and optimization of an analytical procedure using ultrafiltration and a flow-injection system, and its application in in-situ experiments to characterize the lability and availability of metal species in humic-rich hydrocolloids. The on-line system consists of a tangential flow ultrafiltration device equipped with a 3-kDa filtration membrane. The concentration of free ions in the filtrate was determined by atomic-absorption spectrometry, assuming that metals not complexed by aquatic humic substances (AHS) were separated from the complexed species (M-AHS) retained by the membrane. For optimization, exchange experiments using Cu(II) solutions and AHS solutions doped with the metal ions Ni(II), Mn(II), Fe(III), Cd (II), and Zn(II) were carried out to characterize the stability of the metal-AHS complexes. The new procedure was then applied in-situ at a tributary of the Ribeira do Iguape river (Iguape, São Paulo State, Brazil) and evaluated using the ions Fe(III) and Mn(II), which are considered to be essential constituents of aquatic systems. From the exchange between metal-natural organic matter (M-NOM) and the Cu(II) ions it was concluded that Cu(II) concentrations > 485 mu g L(-1) were necessary to obtain maximum exchange of the complexes Mn-NOM and Fe-NOM, corresponding to 100% Mn and 8% Fe. Moreover, the new analytical procedure is simple and opens up new perspectives for understanding the complexation, transport, stability, and lability of metal species in humic-rich aquatic environments.

Lymphatic drainage on healthy and neoplasic mammary glands in female dogs: Can it really be altered?

The purpose of this research was to study the mammary lymphatic drainage under a macroscopic and mesoscopic view, comparing the vascular pattern of healthy and neoplasic mammary glands injected with drawing ink alcoholic and fluorescein solutions, in 46 mongrel female dogs. The results pointed out that the thoracic gland is drained by the axillary lymph centre, but in mammary neoplasia either superficial cervical or ventral thoracic lymph centres can be involved. Cranial and caudal abdominal glands may be drained by the axillary, inguinofemoral and popliteal lymph centres. However, the popliteal drainage is specific for the healthy caudal abdominal mammary gland. The inguinal gland can be drained by both inguinofemoral and popliteal lymph centres in both neoplasic and healthy conditions. Regarding the mammary lymphatic communications, this research demonstrated that neoplasic glands present more types of anastomosis (40.9%), than healthy glands (33.33%), and an increase in contralateral anastomosis (50%) compared with healthy ones (33%). Given the data, the mammary neoplasia can change the lymphatic drainage pattern in terms of lymph centres and vascular arborization, thus forming new drainage channels and recruiting a larger number of lymph nodes. Lastly, some comments were made about the severity of a specific neoplasic mammary gland and conditions to be considered before making a decision in terms of the most adequate operative procedure, and suggestions for further investigations.

The early systemic and gastrointestinal oxygenation effects of hemorrhagic shock resuscitation with hypertonic saline and hypertonic saline 6% dextran-70: A comparative study in dogs

The smaller volemic state from hypertonic (7.5%) saline (HS) solution administration in hemorrhagic shock can determine lesser systemic oxygen delivery and tissue oxygenation than conventional plasma expanders. In a model of hemorrhagic shock in dogs, we studied the systemic and gastrointestinal oxygenation effects of HS and hyperoncotic (6%) dextran-70 in combination with HS (HSD) solutions in comparison with lactated Ringer's (LR) and (6%) hydroxyethyl starch (HES) solutions. Forty-eight mongrel dogs were anesthetized, mechanically ventilated, and subjected to splenectomy. A gastric air tonometer was placed. in the stomach for intramucosal gastric CO2 (Pgco(2)) determination and for the calculation of intramucosal. pH (pHi):[pHi = pHa - log(Pgco(2)/Paco(2))].The dogs were hemorrhaged (42% of blood volume) to hold mean arterial blood pressure at 40-50 mm Hg over 30 min and were then resuscitated with LR (n = 12) in a 3:1 relation to removed blood volume; HS (n = 12), 6 mL / kg; HSD (n = 12), 6 mL / kg; and HES (mean molecular weight, 200 kDa; degree of substitution, 0.5) (n = 12) in a 1:1 relation to the removed blood volume. Hemodynamic, systemic, and gastric oxygenation variables were measured at baseline, after 30 min of hemorrhage, and 5, 60, and 120 min after intravascular fluid resuscitation. After fluid resuscitation, HS showed significantly lower arterial pH and mixed venous Po-2 and higher systemic oxygen uptake index and systemic oxygenation extraction than LR and HES (P < 0.05), whereas HSD showed significantly lower arterial pH than LR and HES (P < 0.05). Only HS and HSD did not return arterial pH and pHi to control levels (P < 0.05). In conclusion, all solutions improved systemic and gastrointestinal oxygenation after hemorrhagic shock in dogs. However, the HS solution showed the worst response in comparison to LR and HES solutions in relation to systemic oxygenation, whereas HSD showed intermediate values. HS and HSD solutions did not return regional oxygenation to control values.

Genotypic characterization of Toxoplasma gondii in sheep from Brazilian slaughterhouses: New atypical genotypes and the clonal type II strain identified

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Colour change of soft denture liners after storage in coffee and coke

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface roughness and hardness of a composite resin: influence of finishing and polishing and immersion methods

This study evaluated the finishing and polishing effect on the surface roughness and hardness of the Filtek Supreme XT, in fluoride solutions. Specimens were prepared (n = 140) with half of the samples finished and polished with Super-Snap (R) disks. The experimental groups were divided according to the presence or absence of finishing and polishing and immersion solutions (artificial saliva, sodium fluoride solution at 0.05%-manipulated, Fluordent Reach, Oral B, Fluorgard). The specimens remained immersed in artificial saliva for 24 hours and were then subjected to initial analysis (baseline) of surface roughness and Vickers microhardness. Next, they were immersed in different fluoride solutions for 1 min/day, for 60 days. Afterwards, a new surface roughness and microhardness reading was conducted. The data were submitted to a two-way ANOVA and Tukey's test (5% significance level). For the comparison of mean roughness and hardness at baseline and after 60 days, the paired Student t test was used. The results showed that the surface roughness and microhardness of the Filtek Supreme XT were influenced by the finishing and polishing procedure, independently of the immersion methods.

Cytotoxic effects and pulpal response caused by a mineral trioxide aggregate formulation and calcium hydroxide

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion

Statement of the problem. In selecting a disinfectant for dental prostheses, compatibility between the disinfectant and the type of denture base material must be considered to avoid adverse effects on the hardness of the acrylic resin.Purpose. This study investigated the hardness of 2 denture base resins after disinfection and long-term water immersion.Material and methods. Thirty-two disk-shaped specimens (13 mm in diameter and 8 mm thick) were fabricated from each resin (Lucitone 550 and QC-20), polished, stored in water at 37degreesC for 48 hours, and submitted to hardness tests (Vickers hardness number [VHN]) before disinfection. Disinfection methods included scrubbing with 4% chlorhexidine gluconate for 1 minute, immersion for 10 minutes in I of the tested disinfectant Solutions (n=8) (3.78% sodium perborate, 4% chlorhexidine gluconate, or 1% sodium hypochorite), and immersion in water for 3 minutes. The disinfection procedures were repeated 4 times, and 12 hardness measurements were made on each specimen. Control specimens (not disinfected) were stored in water for 56 minutes. Hardness tests (VHN) were also performed after 15, 30, 60, 90, and 120 days of storage in water. Statistical analyses of data were conducted with a repeated measures 3-way analysis of variance (ANOVA) and Tukey post-hoc test (alpha=.05).Results. Mean values +/- SD for Lucitone 550 (16.52 +/- 0.94 VHN) and QC-20 (9.61 +/- 0.62 VHN) demonstrated a significant (P<.05) decrease in hardness after disinfection, regardless of material and disinfectant solutions used (Lucitone 550: 15.25 +/- 0.74; QC-20: 8.09 +/- 0.39). However, this effect was reversed after 15 days of storage in water. Both materials exhibited a continuous increase (P<.05) in hardness values for up to 60 days of water storage, after which no significant change was observed.Conclusion. Within the limitations of this in vitro study, QC-20 and Lucitone 550 specimens exhibited significantly lower hardness values after disinfection regardless of the disinfectant solution used.

The effect of disinfectant solutions on the hardness of acrylic resin denture teeth

This investigation studied the effects of disinfectant solutions on the hardness of acrylic resin denture teeth. The occlusal surfaces of 64 resin denture teeth were ground flat with abrasives up to 400-grit silicon carbide paper. Measurements were made after polishing and after the specimens were stored in water at 37 degreesC for 48 h. The specimens were then divided into four groups and immersed in chemical disinfectants (4% chlorhexidine; 1% sodium hypochlorite and sodium perborate) for 10 min. The disinfection methods were performed twice to simulate clinical conditions and hardness measurements were made. Specimens tested as controls were immersed in water during the same disinfection time. Eight specimens were produced for each group. After desinfection procedures, testing of hardness was also performed after the samples were stored at 37 degreesC for 7, 30, 60, 90 and 120 days. Data were analysed using two-way analysis of variance (anova) and Tukey's test at 95% confidence level. According to the results, no significant differences were found between materials and immersion solutions (P > 0.05). However, a continuous decrease in hardness was noticed after ageing (P < 0.05). It was conclude that the surfaces of both acrylic resin denture teeth softened upon immersion in water regardless the disinfecting solution.

Presence and morphology of the molar tubercle according to dentition, hemi-arch and sex

The purpose of this study was to assess the presence and the degree of expression of the molar tubercle according to sex, dentition and hemi-arches. Study casts of 126 patients were assessed, and those were under orthodontic treatment at the University of Franca, UNIFRAN; they were from both sexs, from 4 to 13 years old. The upper second primary molars and the upper first permanent molars, from both sides, were evaluated regarding the presence and the degree of expression of the molar tubercle. For an association study, the qui-square test was utilized. The concordance about the presence or absence of the molar tubercle according to dentition, hemi-arch and sex, was estimated by the Kappa Statistics. There was a sexual dimorphism concerning the presence/absence of the molar tubercle (p=0.009), however there was no significant association between the degree of expression of the tubercle and the sex (p=0.791). The molar tubercle was more frequently observed in the male sex, in upper second primary molars and in the form of depression. There was a significant and "moderate" concordance between the left and right sides in primary dentition (k=0.596), there was a "good" concordance in permanent dentition (k=0.708) and a "weak" and significant concordance between the presence of the molar tubercle and dentition (k=0.207).

Periacinar Retraction Clefting in Nonneoplastic and Neoplastic Prostatic Glands: Artifact or Molecular Involvement

A space between neoplastic acini and prostatic stroma is not rare and studies have interpreted this as an artifact, considering the absence of endothelial cells indicating vascular invasion. Thus, the aims of this work were to characterize and correlate the occurrence and extent of retraction clefting with the reactivities of alpha and beta dystroglycan (alpha DG, beta DG), laminin, matrix metalloproteinase 2 (MMP-2), p63, insulin-like growth factor 1(IGF-1), vimentin, and fibroblast growth factor 2 (FGF-2). The study was based on nonneoplastic and neoplastic prostatic tissues obtained from necropsies and retropubic radical prostatectomies. The results showed that periacinar retraction clefting was significantly more frequent in prostatic carcinoma samples than in normal prostatic acini. Most of the neoplastic acini (72.0%) showed retraction clefting of more than 50% of circumference, which were significantly more frequent in Gleason score 7 and 6. Decreased collagen and reticular and elastic fibers were verified in the stroma around neoplastic acini. Weak and discontinuous alpha DG, beta DG, and laminin immunoreactivities and intensified MMP-2, vimentin, IGF-1 and FGF-2 immunoreactivities were verified in the neoplastic acini; p63 immunoreactivity was negative in all carcinomas. Thus, these findings showed that the lack of epithelial basal cells, DGs, and laminin and increased MMP-2, IGF-1, and FGF-7 could be considered important pathways in periacinar retraction occurrence. This study demonstrated the origin of and the biological mechanisms responsible for periacinar retraction clefting in prostatic carcinoma.