Physical characterization of particleboard produced with waste from ethanol and sugar mill

The problem of proper disposal of solid waste generated in different industrial processes is one of worldwide environmental concerns nowadays. Thus, this study aimed to establish a new alternative for the disposal of two agro-industrial residues employing them to produce particleboard for different purposes in building construction. The focus was given to the reuse of the sugarcane bagasse (SB) originated during the processing of Saccharum officinarum for sugar and ethanol production, and bamboo stem leaves of Dendrocalamus giganteus(BB). For this, six particleboards were produced in the following compositions: with 100% SB, 75% SB + 25% BB, 50% SB+50% BB, 40% SB +60 BB, 25% SB+ 75% BB and 100% BB in the total mass of the composites. The particleboards physical characterization followed Brazilian Standard ABNT NBR 14810-3 to density, moisture content and water absorption. Results showed these raw materials are compatible to particleboard production.

Study of the feasibility of mix of species from sawmill waste and limiting for particleboard

This study aims to determine physical properties of particleboard made of sawmill waste, as a mix of several wood species, and two adhesives: urea-formaldehyde, usually employed in industry (even with drawbacks or formaldehyde emission during pressing) and FASTBOND®, water based resin, still poorly referenced in literature. Sixteen panels have been produced, in four experimental conditions, defined by using two adhesives and a 12 mm thick limiter (or not). Variance analysis was adopted to evaluate influence of experimental conditions on physical properties of produced panels, manufactured in nominal dimensions 350x350mm; 10% resin related to particles mass (at 5% moisture); 3.5 MPa compaction pressure, temperature 130°C, in a 10 min cycle. Tests to determine density, moisture content, swelling and water absorption were carried out based on normative parameters of ABNT NBR 14810:2006. Results have been satisfactory to panels produced with urea-formaldehyde but those manufactured with polychloroprene based resin (FASTBOND®) not meet regulatory requirements. Best results have been obtained without limiter.

Uprecycling leater waste

Incorporating contaminated leather waste into natural rubber improves the rubber's mechanical properties and avoids improper disposal of toxins.

Addition of lipolytic enzyme in anaerobic co-digestion of swine manure and inclusion levels of waste vegetable oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Orange and mango byproducts: agro-industrial waste as source of bioactive compounds and botanical versus commercial description: a review

Vegetal origin agro-industrial wastes are seen as a problem since the beginning of the industrial processes; however, they are becoming attractive as raw material for numerous purposes such as active enzymes and in the molecule bioprospecting area. Moreover, it is difficult to understand what the studied residue is consisted of in studies on agro-industrial waste, since the wastes names and constituents may vary according to the used equipment, as for waste from orange and mango processing. Thus, defining a specific waste, including comparisons between botanical and industrial descriptions, can help in understanding studies about wastes. The current review sought to contextualize such a scenario by gathering definitions, relevant information and studies on agro-industrial wastes and by-products, international enzymes market, and recent studies on bioactive compounds. In this context, waste from orange and mango are interesting because of the expression of these fruits on the world market; moreover, the processing does not include steps that could disrupt these biomolecules.

Influência do desgaste das garras dos pneus e das condições superficiais do solo nas operações de campo de um trator agrícola

The objective of this work was to compare the performance of a tractor equipped with used and new bias-ply tires (63.4% and 41.2%, front and rear tire waste, respectively), in three surface conditions: tillage soil, vegetal covered soil and firm soil. Field data were collected to calculate: forward speed, front and rear slippage tires, drawbar pull, available power at drawbar bar and fuel consumption. Results showed that both, tires and soil conditions, changed tractor capacity on developing drawbar traction. The worst performance was observed on tillage soil. The best performance of the tractor was observed at firm soil track. On the track with tilled soil, results showed that the forward speed was the lowest among the three soil conditions due to the front and rear slippage tires which was higher than vegetal covered and firm soil tracks. Fuel consumption results showed higher values on tilled tracks when compared with firm and vegetal covered tracks. The fuel consumption levels evaluated on bias-ply tires lead to significant changes on tractor’s performance at tilled soil, indicating that, at this condition, it’s necessary to replace the used tires by new tires. For vegetal covered soil operations, and also on firm soil conditions, used tires, at studied levels, indicated that these tires might still be used without tractor performance changing.

Cultivation and bromatological analysis of the medicinal mushroom Ganoderma lucidum (Curt.: Fr.) P. Karst cultivated in agricultural waste

The objective of the study was to evaluate the production of two strains of Ganoderma lucidum on agricultural waste and carry out bromatological analyses of the basidiomata obtained from the cultivation. The experiment was carried out at the Mushroom Module at the School of Agronomic Sciences of the São Paulo State University (FCA/UNESP - Botucatu, SP, Brazil) and two strains were used (GLM-09/01 and GLM-10/02) which were cultivated on waste, oat straw, bean straw, brachiaria grass straw, Tifton grass straw and eucalyptus sawdust under two situations: with (20%) and without (0%) supplementation with wheat bran. All the waste was taken from dumps of agricultural activities in Botucatu-SP. Both treatments were carried out in 10 repetitions, totaling 200 packages. The mushrooms cultivation took 90 days. Next, the biological efficiency of the treatments and the bromatological analysis of the basidiomata were evaluated. The biological efficiency (BE) values (%) varied from 0.0 to 6.7%. In the mushroom bromatological analyses, the results ranged from 8.7 to 13.7%, from 2.0 to 6.7%, from 0.83 to 1.79% and from 38.8 to 54.5%, for total protein, ethereal extract, ash and crude fiber, respectively. Thus, we conclude that the substrates which presented the greater yield were the brachiaria straw, 20% in both strains tested (GLM-09/01 and GLM-10/02) and the bean straw, 20% in the strain GLM-10/02. The mushrooms showed high levels of ethereal extract, fibers and ashes and a low level of proteins.

Never Let a Crisis Go to Waste

The phrase, “never let a crisis go to waste” may take frugality to a whole new level! That’s the sentiment of Lynda Applegate, Professor of Business Administration at the Harvard Business School, in a recent on-line article, Building Businesses in Turbulent Times.

NF99-403 Livestock Waste Management Act (Revised March 2001)

The Livestock Waste Management Act requires all livestock operations with 300 animal units or more to be inspected by the Nebraska Department of Environmental Quality (DEQ) to determine whether livestock wastes contaminate surface or ground water. This NebFact discusses the following parts of the Livestock Waste Management Act: Act (how cited); Terms (defined); Livestock operation, exemption, livestock waste control facility, permit, restriction; Construction permit or operating permit (when required), livestock waste control facilities, classification, restrictions; Section (how construed); Cold water class A streams (designation); Permit (acknowledgment required); Livestock operation (request inspection, when, fees, department, duties); Permits (duration, modification); Permit (application and modification fees, Livestock Waste Management Cash Fund (created, use, investment, report, legislative intent); Applicant (rejection, grounds, application, information required, certification required); Postconstruction inspection requirement; Department (contracts authorized, permit application, notice required); Permit application (approval from Department of Natural Resources and Department of Environmental Quality, powers); Council (rules and regulations); and Enforcement of act (legislative intent).

A Fixed Netting System as a Means of Excluding Birds From a Domestic Waste Landfill

Many bird species are attracted to landfills which take domestic or putrescible waste. These sites provide a reliable, rich source of food which can attract large concentrations of birds. The birds may cause conflicts with human interest with respect to noise, birds carrying litter off site, possible transmission of pathogens in bird droppings and the potential for birdstrikes. In the UK there is an 8 mile safeguarding radius around an airfield, within which any planning applications must pass scrutiny from regulatory bodies to show they will not attract birds into the area and increase the birdstrike risk. Peckfield Landfill site near Leeds, West Yorkshire was chosen for a trial of a netting system designed to exclude birds from domestic waste landfills. The site was assessed for bird numbers before the trial, during the netting trial and after the net had been removed. A ScanCord net was installed for 6 weeks, during which time all household waste was tipped inside the net. Gull numbers decreased on the site from a mean of 1074 per hourly count to 29 per hourly count after two days. The gull numbers increased again after the net had been removed. Bird concentrations in the surroundings were also monitored to assess the effect of the net. Bird numbers in the immediate vicinity of the landfill site were higher than those further away. When the net was installed, the bird concentrations adjacent to the landfill site decreased. Corvids were not affected by the net as they fed on covered waste which was available outside the net throughout the trial. This shows that bird problems on a landfill site are complex, requiring a comprehensive policy of bird control. A supporting bird scaring system and clear operating policy for sites near to airports would be required.

Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil

A contaminated site from a downstream municipal solid waste disposal site in Brazil was investigated by using a 3D resistivity and induced polarization (IP) imaging technique. This investigation purpose was to detect and delineate contamination plume produced by wastes. The area was selected based on previous geophysical investigations, and chemical analyses carried out in the site, indicating the presence of a contamination plume in the area. Resistivity model has successfully imaged waste presence (rho < 20 Omega m), water table depth, and groundwater flow direction. A conductive anomaly (rho < 20 Omega m) outside wastes placement was interpreted as a contamination plume. Chargeability model was also able to imaging waste presence (m > 31 mV/V), water table depth, and groundwater flow direction. A higher chargeability zone (m > 31 mV/V) outside wastes placement and following conductive anomaly was interpreted as a contamination plume. Normalized chargeability (MN = m/rho) confirmed polarizable zone, which could be an effect of a salinity increase (contamination plume), and the clay presence in the environment.

Synthesis of carbon nanomaterials from corn waste (DDGS)

Syntesis of carbon nanomaterials from corn waste (DDGS). The world's largest ethanol producer (USA) uses corn as feedstock. DDGS (distillers dried grains with solubles) is the main waste generated from this process (around 32 million t/year). DDGS samples were pyrolyzed at 1000 degrees C in a furnace with controlled atmosphere. The effluent was channeled to a second furnace, in which catalyst substrates were placed. Chromatographic analysis was used to evaluate the gaseous effluents, showing that the catalyst reduced hydrocarbon emissions. The solid products formed were analyzed by SEM and TEM. Graphitic structures and carbon nanofibers, 50 mu m in length and with diameters of 80-200 nm, were formed.

Rice husk derived waste materials as partial cement replacement in lightweight concrete

In this study rice husk ash (RHA) and broiler bed ash from rice husk (BBA), two agricultural waste materials, have been assessed for use as partial cement replacement materials for application in lightweight concrete. Physical and chemical characteristics of RHA and BBA were first analyzed. Three similar types of lightweight concrete were produced, a control type in which the binder was just CEMI cement (CTL) and two other types with 10% cement replacement with, respectively, RHA and BBA. All types of similar lightweight concrete were prepared to present the same workability by adjusting the amount of superplasticizer. Properties of concrete investigated were compressive and flexural strength at different ages, absorption by capillarity, resistivity and resistance to chloride ion penetration (CTH method) and accelerated carbonation. Test results obtained for 10% cement replacement level in lightweight concrete indicate that although the addition of BBA conducted to lower performance in terms of the degradation indicative tests, RHA led to the enhancement of mechanical properties, especially early strength and also fast ageing related results, further contributing to sustainable construction with energy saver lightweight concrete.

Critical analysis of the regulations regarding the disposal of medication waste

Expired or unused medication at people's homes is normally disposed of in normal garbage, sewage system or, in certain cases, returned to the public health system. There is still no specific legislation regarding this leftover medication to regulate and orient the handling and correct disposal of medication waste. However, there is defined regulation regarding health services' solid waste. This article has the objective of discussing management models for the disposal of medication waste and the recommendations made by pertinent national and international legislation. By means of literature reviews, the management structure for medication waste of international legislation and the regulations regarding the environment, as well as the national legislation for the solid waste from health services was analyzed. Through the analysis it was possible to present better clarifications as to the possible impacts to the environment, to the public's health and alternatives in order to obtain the efficient disposal of medication, reducing and/or avoiding sanitary risk, guaranteeing the quality and safety of public health.

Hot metal desulfurization by marble waste and fluorspar

The objective of this paper is to present an analysis of the use of residual marble mixtures in the pig iron desulfurization process. The study involved the use of: marble waste, fluorspar, lime, and hot metal. Four mixtures were made and added to a liquid hot metal - with known chemical composition - at a temperature of 1450ºC. The mass of each element was calculated from its chemical analysis and compared with an industrial mixture. All of the four mixtures used in the experiments were stirred by a mechanical stirrer. Samples were collected by vacuum sampling for times of 5, 10, 15, 20, and 30 minutes, and analysis was performed to check sulfur variation in the bath with time. The results were analyzed and they verified that it was possible to use marble waste as a desulfurizer.