Extended use of gamma irradiation in wild mushrooms conservation: validation of 2 kGy dose to preserve their chemical characteristics

Irradiation is recognized by international organizations as a conservation technology, and its application to wild mushrooms has been tested in some species. Our research group evaluated the effectiveness of gamma irradiation to conserve different samples of highly appreciated species, particularly, Lactarius deliciosus, Macrolepiota procera, Boletus edulis and Hydnum repandum. From those results and considering also international recommendations on this subject, the 2 kGy dose was chosen for further studies. Therefore, the application of gamma irradiation at 2 kGy dose was extended to Boletus pinophilus Pilát & Dermek and Clitocybe subconnexa Murrill to validate the proposed technology. Considering the obtained results, some of the analysed chemical parameters (specially sugars and fatty acids), as well as the antioxidant activity, showed significant changes after irradiation treatment, particularly in B. pinophillus, probably due to its higher water content. Nevertheless, the obtained differences did not seem to be sufficient to change the organoleptic characteristics of these mushrooms. Furthermore, the antioxidant activity was generally higher in irradiated samples. In conclusion, the detected chemical changes might be considered as acceptable, when considering the high advantages of gamma irradiation at decontamination and/or disinfestation level.

Preliminary Validation of the "Plausibility of Intraracial Marriage Scale": A Study of Upwardly Mobile African American Women

Like many Americans, African American women often view marriage as an important life goal; however, it is likely that many also view it as one that is out of reach (Dixon, 2009; Wallace, 2014). The present study sought to address this issue by developing a new measure to assess African American women’s experiences in this regard in hopes of shedding light on how it impacts their dating and mating experiences. A total of 251 heterosexual African American women who were either enrolled in college or who had completed some form of postsecondary education completed an online survey assessing a variety of topics including their attitudes and emotions regarding a shortage of marriageable men, their standards to marry, and their willingness to date interracially. Results from this study established preliminary construct validity for a new scale assessing African American women’s attitudes and emotions about the shortage of “marriageable” African American men.

Validation of the Spanish version of Soane's ISA Engagement Scale

The interest in the study of engagement in the academic field can be seen through the increasing number of results in Google Scholar and in Scopus, going from barely 20 results between 2000 and 2005 to more than 500 in Scopus and more than 1100 in Google Scholar between 2011 and 2015. Soane et al. (2012) propose a unified theoretical framework as the basis of the psychological mechanism of engagement, grounded on the approach of Kahn (1990). The aim of this paper is to analyze the psychometric properties of the Spanish version of the ISA engagement scale in a sample of 477 employees of the administration and services sector in a Spanish public university. Keeping the original design of the English version of the scale, the proposed factorial structure is validated with the good fit of the data according to the revised goodness of fit indices; reliability and the results of the analysis of construct validity.

VALIDATION OF A 'DISPLACEMENT TOMOGRAPHY' INVERSION METHOD FOR MODELING SHEET INTRUSIONS

The study of volcano deformation data can provide information on magma processes and help assess the potential for future eruptions. In employing inverse deformation modeling on these data, we attempt to characterize the geometry, location and volume/pressure change of a deformation source. Techniques currently used to model sheet intrusions (e.g., dikes and sills) often require significant a priori assumptions about source geometry and can require testing a large number of parameters. Moreover, surface deformations are a non-linear function of the source geometry and location. This requires the use of Monte Carlo inversion techniques which leads to long computation times. Recently, ‘displacement tomography’ models have been used to characterize magma reservoirs by inverting source deformation data for volume changes using a grid of point sources in the subsurface. The computations involved in these models are less intensive as no assumptions are made on the source geometry and location, and the relationship between the point sources and the surface deformation is linear. In this project, seeking a less computationally intensive technique for fracture sources, we tested if this displacement tomography method for reservoirs could be used for sheet intrusions. We began by simulating the opening of three synthetic dikes of known geometry and location using an established deformation model for fracture sources. We then sought to reproduce the displacements and volume changes undergone by the fractures using the sources employed in the tomography methodology. Results of this validation indicate the volumetric point sources are not appropriate for locating fracture sources, however they may provide useful qualitative information on volume changes occurring in the surrounding rock, and therefore indirectly indicate the source location.

Development and validation of a computationally efficient pseudo 3D model for planar SOFC integrated with a heating furnace

Efficient numerical models facilitate the study and design of solid oxide fuel cells (SOFCs), stacks, and systems. Whilst the accuracy and reliability of the computed results are usually sought by researchers, the corresponding modelling complexities could result in practical difficulties regarding the implementation flexibility and computational costs. The main objective of this article is to adapt a simple but viable numerical tool for evaluation of our experimental rig. Accordingly, a model for a multi-layer SOFC surrounded by a constant temperature furnace is presented, trained and validated against experimental data. The model consists of a four-layer structure including stand, two interconnects, and PEN (Positive electrode-Electrolyte-Negative electrode); each being approximated by a lumped parameter model. The heating process through the surrounding chamber is also considered. We used a set of V-I characteristics data for parameter adjustment followed by model verification against two independent sets of data. The model results show a good agreement with practical data, offering a significant improvement compared to reduced models in which the impact of external heat loss is neglected. Furthermore, thermal analysis for adiabatic and non-adiabatic process is carried out to capture the thermal behaviour of a single cell followed by a polarisation loss assessment. Finally, model-based design of experiment is demonstrated for a case study.

An inter-laboratory validation of a real time PCR assay to measure host excretion of bacterial pathogens, particularly of Mycobacterium bovis

Advances in the diagnosis of Mycobacterium bovis infection in wildlife hosts may benefit the development of sustainable approaches to the management of bovine tuberculosis in cattle. In the present study, three laboratories from two different countries participated in a validation trial to evaluate the reliability and reproducibility of a real time PCR assay in the detection and quantification of M. bovis from environmental samples. The sample panels consisted of negative badger faeces spiked with a dilution series of M. bovis BCG Pasteur and of field samples of faeces from badgers of unknown infection status taken from badger latrines in areas with high and low incidence of bovine TB (bTB) in cattle. Samples were tested with a previously optimised methodology. The experimental design involved rigorous testing which highlighted a number of potential pitfalls in the analysis of environmental samples using real time PCR. Despite minor variation between operators and laboratories, the validation study demonstrated good concordance between the three laboratories: on the spiked panels, the test showed high levels of agreement in terms of positive/negative detection, with high specificity (100%) and high sensitivity (97%) at levels of 10(5) cells g(-1) and above. Quantitative analysis of the data revealed low variability in recovery of BCG cells between laboratories and operators. On the field samples, the test showed high reproducibility both in terms of positive/negative detection and in the number of cells detected, despite low numbers of samples identified as positive by any laboratory. Use of a parallel PCR inhibition control assay revealed negligible PCR-interfering chemicals co-extracted with the DNA. This is the first example of a multi-laboratory validation of a real time PCR assay for the detection of mycobacteria in environmental samples. Field studies are now required to determine how best to apply the assay for population-level bTB surveillance in wildlife.

Proposal and Validation of a Scale of Composite Measure Reactivity Score to Characterize the Reactivity in Horses During Handling

This study aimed to identify the parameters related to the expression of the reactivity in horses during handling and based on that proposed and validated a scale of composite measure reactivity score to characterize horse's reactivity. To this end, the first stage (S1) proposed the scale and the second (S2) validated it. In S1, 364 Lusitano horses were evaluated, 188 were adult breeding mares (4–12 years old), and 176 were foals (males/females, aged from 2 months to 2 years). During hooves trimming, vermifuge application, palpation scores were assigned to behaviors of movement, ears and eyes position, breathing, vocalization, and urination. A response parameter called reactivity was attributed to each animal, ranging from score 1 (nonreactive/calm) to score 4 (very reactive/aggressive). The verification of the possible parameters (age, behavior), which explains the response parameter (reactivity), was taken using ordinal proportional odds model. Movement, breathing, ears and eyes position, vocalization, and age appear to explain the reactivity of horses during handling (P < .01). Therefore, based on these parameters, it was possible to propose two scales of composite measure reactivity score: one to characterize the mares and another the foals. On S2, the proposed scale was validated by the simultaneous application of Forced Human Approach Test, another commonly used test to evaluate the reactivity in horses, with a correlation of 0.97 (P < .05). The assessment of the reactivity of horses during handling by a composite measure reactivity score scale is valid, and easy to apply, without disrupting daily routine and override the impact of individual differences.

Social competence and career development: validation of a scale with secondary students

This paper presents a validation study of the Perceived Social Competence in Career Scale (SCCarS). The sample included 571 adolescents, 283 girls (49.6%) and 287 boys (50.3%), aged 14 to 25 years old (ì=16.33±1.41), 10th and 11th grade students attending secondary schools in the northern, central and southern Portugal. Exploratory factor analysis indicates the presence of eight factors, with eigenvalues superior to 1.00, explaining 79.16% of the total variance of the items. Confirmatory factor analysis provided support to the factorial structure of eight factors, with adequate fit indices (X2/df=4.229, CFI= 0.909, GFI= 0.869, RMSEA= 0.079, p= 0.000). These results are consistent with the factorial structure found in previous studies carried out with Portuguese samples from 8th grade. Implications are drawn related to the need for further study of the psychometric characteristics of the SCCarS with young people from different age groups

Development and experimental validation of a knock induced damage model and real-time implementation of model-based strategies to control knock intensity in boosted gasoline engines

This PhD thesis reports the main activities carried out during the 3 years long “Mechanics and advanced engineering sciences” course, at the Department of Industrial Engineering of the University of Bologna. The research project title is “Development and analysis of high efficiency combustion systems for internal combustion engines” and the main topic is knock, one of the main challenges for boosted gasoline engines. Through experimental campaigns, modelling activity and test bench validation, 4 different aspects have been addressed to tackle the issue. The main path goes towards the definition and calibration of a knock-induced damage model, to be implemented in the on-board control strategy, but also usable for the engine calibration and potentially during the engine design. Ionization current signal capabilities have been investigated to fully replace the pressure sensor, to develop a robust on-board close-loop combustion control strategy, both in knock-free and knock-limited conditions. Water injection is a powerful solution to mitigate knock intensity and exhaust temperature, improving fuel consumption; its capabilities have been modelled and validated at the test bench. Finally, an empiric model is proposed to predict the engine knock response, depending on several operating condition and control parameters, including injected water quantity.

Model-Based validation of Driver Drowsiness Detection System for ADAS

The work described in this Master’s Degree thesis was born after the collaboration with the company Maserati S.p.a, an Italian luxury car maker with its headquarters located in Modena, in the heart of the Italian Motor Valley, where I worked as a stagiaire in the Virtual Engineering team between September 2021 and February 2022. This work proposes the validation using real-world ECUs of a Driver Drowsiness Detection (DDD) system prototype based on different detection methods with the goal to overcome input signal losses and system failures. Detection methods of different categories have been chosen from literature and merged with the goal of utilizing the benefits of each of them, overcoming their limitations and limiting as much as possible their degree of intrusiveness to prevent any kind of driving distraction: an image processing-based technique for human physical signals detection as well as methods based on driver-vehicle interaction are used. A Driver-In-the-Loop simulator is used to gather real data on which a Machine Learning-based algorithm will be trained and validated. These data come from the tests that the company conducts in its daily activities so confidential information about the simulator and the drivers will be omitted. Although the impact of the proposed system is not remarkable and there is still work to do in all its elements, the results indicate the main advantages of the system in terms of robustness against subsystem failures and signal losses.

Numerical modeling and experimental validation of the recrystallization behaviour in the extrusion of 6XXX aluminum alloys

The microstructure of 6XXX aluminum alloys deeply affects mechanical, crash, corrosion and aesthetic properties of extruded profiles. Unfortunately, grain structure evolution during manufacturing processes is a complex phenomenon because several process and material parameters such as alloy chemical composition, temperature, extrusion speed, tools geometries, quenching and thermal treatment parameters affect the grain evolution during the manufacturing process. The aim of the present PhD thesis was the analysis of the recrystallization kinetics during the hot extrusion of 6XXX aluminum alloys and the development of reliable recrystallization models to be used in FEM codes for the microstructure prediction at a die design stage. Experimental activities have been carried out in order to acquire data for the recrystallization models development, validation and also to investigate the effect of process parameters and die design on the microstructure of the final component. The experimental campaign reported in this thesis involved the extrusion of AA6063, AA6060 and AA6082 profiles with different process parameters in order to provide a reliable amount of data for the models validation. A particular focus was made to investigate the PCG defect evolution during the extrusion of medium-strength alloys such as AA6082. Several die designs and process conditions were analysed in order to understand the influence of each of them on the recrystallization behaviour of the investigated alloy. From the numerical point of view, innovative models for the microstructure prediction were developed and validated over the extrusion of industrial-scale profiles with complex geometries, showing a good matching in terms of the grain size and surface recrystallization prediction. The achieved results suggest the reliability of the developed models and their application in the industrial field for process and material properties optimization at a die-design stage.

Development of JADE, a new software for the verification and validation of nuclear data libraries

Nuclear cross sections are the pillars onto which the transport simulation of particles and radiations is built on. Since the nuclear data libraries production chain is extremely complex and made of different steps, it is mandatory to foresee stringent verification and validation procedures to be applied to it. The work here presented has been focused on the development of a new python based software called JADE, whose objective is to give a significant help in increasing the level of automation and standardization of these procedures in order to reduce the time passing between new libraries releases and, at the same time, increasing their quality. After an introduction to nuclear fusion (which is the field where the majority of the V\&V action was concentrated for the time being) and to the simulation of particles and radiations transport, the motivations leading to JADE development are discussed. Subsequently, the code general architecture and the implemented benchmarks (both experimental and computational) are described. After that, the results coming from the major application of JADE during the research years are presented. At last, after a final discussion on the objective reached by JADE, the possible brief, mid and long time developments for the project are discussed.

Analysis, Design, and Hardware-in-the-Loop Validation of Multi-Active Bridge Converters

This master's thesis investigates different aspects of Dual-Active-Bridge (DAB) Converter and extends aspects further to Multi-Active-Bridges (MAB). The thesis starts with an overview of the applications of the DAB and MAB and their importance. The analytical part of the thesis includes the derivation of the peak and RMS currents, which is required for finding the losses present in the system. The power converters, considered in this thesis are DAB, Triple-Active Bridge (TAB) and Quad-Active Bridge (QAB). All the theoretical calculations are compared with the simulation results from PLECS software for identifying the correctness of the reviewed and developed theory. The Hardware-in-the-Loop (HIL) simulation is conducted for checking the control operation in real-time with the help of the RT box from the Plexim. Additionally, as in real systems digital signal processor (DSP), system-on-chip or field programmable gate array is employed for the control of the power electronic systems, and the execution of the control in the real-time simulation (RTS) conducted is performed by DSP.

Validation of an intermediate-complexity flood risk model for climate change adaptation

In questo lavoro di tesi viene presentato e validato un modello di rischio di alluvione a complessità intermedia per scenari climatici futuri. Questo modello appartiene a quella categoria di strumenti che mirano a soddisfare le esigenze identificate dal World Climate Research Program (WRCP) per affrontare gli effetti del cambiamento climatico. L'obiettivo perseguito è quello di sviluppare, seguendo un approccio ``bottom-up" al rischio climatico regionale, strumenti che possano aiutare i decisori a realizzare l'adattamento ai cambiamenti climatici. Il modello qui presentato è interamente basato su dati open-source forniti dai servizi Copernicus. Il contributo di questo lavoro di tesi riguarda lo sviluppo di un modello, formulato da (Ruggieri et al.), per stimare i danni di eventi alluvionali fluviali per specifici i livelli di riscaldamento globale (GWL). Il modello è stato testato su tre bacini idrografici di medie dimensioni in Emilia-Romagna, Panaro, Reno e Secchia. In questo lavoro, il modello viene sottoposto a test di sensibilità rispetto a un'ipotesi enunciata nella formulazione del modello, poi vengono effettuate analisi relative all'ensemble multi-modello utilizzato per le proiezioni. Il modello viene quindi validato, confrontando i danni stimati nel clima attuale per i tre fiumi con i danni osservati e confrontando le portate simulate con quelle osservate. Infine, vengono stimati i danni associati agli eventi alluvionali in tre scenari climatici futuri caratterizzati da GWL di 1.5° C, 2.0° C e 3.0°C.

The Burden Of Eclampsia: Results From A Multicenter Study On Surveillance Of Severe Maternal Morbidity In Brazil.

Maternal mortality (MM) is a core indicator of disparities in women's rights. The study of Near Miss cases is strategic to identifying the breakdowns in obstetrical care. In absolute numbers, both MM and occurrence of eclampsia are rare events. We aim to assess the obstetric care indicators and main predictors for severe maternal outcome from eclampsia (SMO: maternal death plus maternal near miss). Secondary analysis of a multicenter, cross-sectional study, including 27 centers from all geographic regions of Brazil, from 2009 to 2010. 426 cases of eclampsia were identified and classified according to the outcomes: SMO and non-SMO. We classified facilities as coming from low- and high-income regions and calculated the WHO's obstetric health indicators. SPSS and Stata softwares were used to calculate the prevalence ratios (PR) and respective 95% confidence interval (CI) to assess maternal characteristics, clinical and obstetrical history, and access to health services as predictors for SMO, subsequently correlating them with the corresponding perinatal outcomes, also applying multiple regression analysis (adjusted for cluster effect). Prevalence of and mortality indexes for eclampsia in higher and lower income regions were 0.2%/0.8% and 8.1%/22%, respectively. Difficulties in access to health care showed that ICU admission (adjPR 3.61; 95% CI 1.77-7.35) and inadequate monitoring (adjPR 2.31; 95% CI 1.48-3.59) were associated with SMO. Morbidity and mortality associated with eclampsia were high in Brazil, especially in lower income regions. Promoting quality maternal health care and improving the availability of obstetric emergency care are essential actions to relieve the burden of eclampsia.