Agents, nodes & resources: Universal naming system for a coordination middleware

La tesi si propone di sviluppare un modello, l'architettura e la tecnologia per il sistema di denominazione del Middleware Coordinato TuCSoN, compresi gli agenti, i nodi e le risorse. Identità universali che rappresentano queste entità, sia per la mobilità fisica sia per quella virtuale, per un Management System (AMS, NMS, RMS) distribuito; tale modulo si occupa anche di ACC e trasduttori, prevedendo questioni come la tolleranza ai guasti, la persistenza, la coerenza, insieme con il coordinamento disincarnata in rete, come accade con le tecnologie Cloud. All’interno dell’elaborato, per prima cosa si è fatta una introduzione andando a descrivere tutto ciò che è contenuto nell’elaborato in modo da dare una visione iniziale globale del lavoro eseguito. Di seguito (1° capitolo) si è descritta tutta la parte relativa alle conoscenze di base che bisogna avere per la comprensione dell’elaborato; tali conoscenze sono relative a TuCSoN (il middleware coordinato con cui il modulo progettato dovrà interfacciarsi) e Cassandra (sistema server distribuito su cui si appoggia la parte di mantenimento e salvataggio dati del modulo). In seguito (2° capitolo) si è descritto JADE, un middleware da cui si è partiti con lo studio per la progettazione del modello e dell’architettura del modulo. Successivamente (3° capitolo) si è andati a spiegare la struttura e il modello del modulo considerato andando ad esaminare tutti i dettagli relativi alle entità interne e di tutti i legami fra esse. In questa parte si è anche dettagliata tutta la parte relativa alla distribuzione sulla rete del modulo e dei suoi componenti. In seguito (4° capitolo) è stata dettagliata e spiegata tutta la parte relativa al sistema di denominazione del modulo, quindi la sintassi e l’insieme di procedure che l’entità consumatrice esterna deve effettuare per ottenere un “nome universale” e quindi anche tutti i passaggi interni del modulo per fornire l’identificatore all’entità consumatrice. Nel capitolo successivo (5° capitolo) si sono descritti tutti i casi di studio relativi alle interazioni con le entità esterne, alle entità interne in caso in cui il modulo sia o meno distribuito sulla rete, e i casi di studio relativi alle politiche, paradigmi e procedure per la tolleranza ai guasti ed agli errori in modo da dettagliare i metodi di riparazione ad essi. Successivamente (6° capitolo) sono stati descritti i possibili sviluppi futuri relativi a nuove forme di interazione fra le entità che utilizzano questo modulo ed alle possibili migliorie e sviluppi tecnologici di questo modulo. Infine sono state descritte le conclusioni relative al modulo progettato con tutti i dettagli in modo da fornire una visione globale di quanto inserito e descritto nell’elaborato.

Traduzione del primo canto dell'inferno dantesco in arabo

In this thesis, I have chosen to translate from Italian into Arabic Canto I of the Inferno, from Dante Alighieri’s epic poem the Divine Comedy (La Divina Commedia) because it’s a masterpiece in both Italian and world literature. Also I have selected it for its artistic value and the universal themes that it depicts. In fact, my purpose in translating this great work into Arabic is to extol the cultural and universal aspects that can be common to human beings everywhere. My paper is written in Arabic and has six sections: A brief introduction on Dante’s life, an introduction to the Divine Comedy, a summary of Canto 1 of the Inferno and its analysis, Canto I of the Inferno in Italian, its translation into Arabic and finally a comment on the translation. The first part -a summary of Dante’s life was presented. The second part of my paper is an introduction to the Divine Comedy, the allegorical epic poem, consisting of three parts: The Inferno (Hell), Purgatorio (Purgatory), and Paradiso (Paradise). The third part is a summary and analysis of Canto 1 of the Inferno, Dante’s most renowned verses. The analysis of Canto highlights the everlasting conflict of man– sinning and giving in to temptation but then trying to repent and search for his soul’s salvation. He reflects on sin, existence, truth, God, love and salvation in his struggle through the dark and gloomy forest which symbolizes conflict and temptations man may succumb to. The influence of Christianity and the Middle ages here shows his commitment to religion and faith. Moreover, his meeting of Virgil, who guides him to the mountain during his journey to salvation, reflects the positive impact of Virgil’s philosophy on Dante. The fourth part presents the Italian version of Canto 1 of the Inferno. The fifth section of my paper is the translation of Canto 1 of the Inferno from Italian to Arabic. Translating an excerpt of Dante’s masterpiece was not an easy task: I had to consult several critique texts besides the Italian source text with explanations, and also some English versions to overcome any translation difficulties. As a student of translation, my goal was to be faithful in relaying to the Arabic audience the authenticity of Dante’s work, his themes, passions and aesthetic style. Finally, I present a conclusion including a comment on the translation and the bibliography of the sources I have consulted.

The quality of primary care in a country with universal health care coverage

Standard indicators of quality of care have been developed in the United States. Limited information exists about quality of care in countries with universal health care coverage.

Strong Dynamical Heterogeneity and Universal Scaling in Driven Granular Fluids

Large-scale simulations of two-dimensional bidisperse granular fluids allow us to determine spatial correlations of slow particles via the four-point structure factor S-4 (q, t). Both cases, elastic (epsilon = 1) and inelastic (epsilon < 1) collisions, are studied. As the fluid approaches structural arrest, i.e., for packing fractions in the range 0.6 <= phi <= 0.805, scaling is shown to hold: S-4 (q, t)/chi(4)(t) = s(q xi(t)). Both the dynamic susceptibility chi(4)(tau(alpha)) and the dynamic correlation length xi(tau(alpha)) evaluated at the alpha relaxation time tau(alpha) can be fitted to a power law divergence at a critical packing fraction. The measured xi(tau(alpha)) widely exceeds the largest one previously observed for three-dimensional (3d) hard sphere fluids. The number of particles in a slow cluster and the correlation length are related by a robust power law, chi(4)(tau(alpha)) approximate to xi(d-p) (tau(alpha)), with an exponent d - p approximate to 1.6. This scaling is remarkably independent of epsilon, even though the strength of the dynamical heterogeneity at constant volume fraction depends strongly on epsilon.

Maintenance of skills, competencies, and performance in allergy and clinical immunology: time to lay the foundation for a universal approach

Allergist/clinical immunologist maintenance of certification and training program reaccreditation are mandatory in some countries. The World Allergy Organization conducted surveys in 2009 and 2011 to assess where such programs were available and to promote the establishment of such programs on a global level. This was done with the presumption that after such an "inventory," World Allergy Organization could offer guidance to its Member Societies on the promotion of such programs to assure the highest standards of practice in the field of allergy and clinical immunology. This review draws on the experience of countries where successful programs are in place and makes recommendations for those wishing to implement such programs for the specialty.

A STUDY ON THE FEASIBILITY OF UNIVERSAL CHIP CONTROL IN MACHINING

A novel solution to the long standing issue of chip entanglement and breakage in metal cutting is presented in this dissertation. Through this work, an attempt is made to achieve universal chip control in machining by using chip guidance and subsequent breakage by backward bending (tensile loading of the chip's rough top surface) to effectively control long continuous chips into small segments. One big limitation of using chip breaker geometries in disposable carbide inserts is that the application range is limited to a narrow band depending on cutting conditions. Even within a recommended operating range, chip breakers do not function effectively as designed due to the inherent variations of the cutting process. Moreover, for a particular process, matching the chip breaker geometry with the right cutting conditions to achieve effective chip control is a very iterative process. The existence of a large variety of proprietary chip breaker designs further exacerbates the problem of easily implementing a robust and comprehensive chip control technique. To address the need for a robust and universal chip control technique, a new method is proposed in this work. By using a single tool top form geometry coupled with a tooling system for inducing chip breaking by backward bending, the proposed method achieves comprehensive chip control over a wide range of cutting conditions. A geometry based model is developed to predict a variable edge inclination angle that guides the chip flow to a predetermined target location. Chip kinematics for the new tool geometry is examined via photographic evidence from experimental cutting trials. Both qualitative and quantitative methods are used to characterize the chip kinematics. Results from the chip characterization studies indicate that the chip flow and final form show a remarkable consistency across multiple levels of workpiece and tool configurations as well as cutting conditions. A new tooling system is then designed to comprehensively break the chip by backward bending. Test results with the new tooling system prove that by utilizing the chip guidance and backward bending mechanism, long continuous chips can be more consistently broken into smaller segments that are generally deemed acceptable or good chips. It is found that the proposed tool can be applied effectively over a wider range of cutting conditions than present chip breakers thus taking possibly the first step towards achieving universal chip control in machining.