Enhancing the Usability of Drug Materials by Electrostatic Atomisation

Electrospraying or electrostatic atomisation is a process of liquid disruption by electrostatic forces. When liquid is brought into an electric field, charge is induced to its surface. Once the repulsive electrostatic force exceeds the liquid surface tension, the liquid disrupts into small highly charged droplets. The size of the electrosprayed droplets can range from hundreds of micrometers down to a few tens of nanometers. Electrospraying can be used not only to produce droplets, but also solid particles. The research presented in this thesis concentrates on producing drug particles by this method. In the experiments, a drug powder was dissolved in a convenient solvent and the solution was atomised. The solvent was then evaporated from the formed droplets in a drying medium and inside each droplet, a dense cluster of the dissolved drug remained. From the pharmaceutical point of view, the most important characteristics of the produced particles are size distribution, porosity, crystal form and degree of crystallinity. These properties affect the dissolution behaviour and ultimately the drug bioavailability in the body. The effects of electrostatic atomization on the aforementioned characteristics are generally not well understood. The research focused on studying these particle properties and finding possible correlations with the spraying parameters. The produced droplets were dried either under atmospheric or reduced pressure, the latter in order to improve the drying process. Special emphasis was put on implementing the spraying under reduced pressure, and the effects of the drying pressure on particle properties. Based on the results, the possibilities to enhance the dissolution of poorly soluble drugs by this method were estimated. In the course of experiments, it was also discovered that electrospraying may have a profound effect on the polymorphic form of the produced drug particles. In the light of the obtained results, it was concluded that electrospraying may offer a valuable tool to overcome some of the challenges met in modern drug development and formulation.

Spectroscopic Studies of III-V Semiconductor Materials for Improved Devices

Defects in semiconductor crystals and at their interfaces usually impair the properties and the performance of devices. These defects include, for example, vacancies (i.e., missing crystal atoms), interstitials (i.e., extra atoms between the host crystal sites), and impurities such as oxygen atoms. The defects can decrease (i) the rate of the radiative electron transition from the conduction band to the valence band, (ii) the amount of charge carriers, and (iii) the mobility of the electrons in the conduction band. It is a common situation that the presence of crystal defects can be readily concluded as a decrease in the luminescence intensity or in the current flow for example. However, the identification of the harmful defects is not straightforward at all because it is challenging to characterize local defects with atomic resolution and identification. Such atomic-scale knowledge is however essential to find methods for reducing the amount of defects in energy-efficient semiconductor devices. The defects formed in thin interface layers of semiconductors are particularly difficult to characterize due to their buried and amorphous structures. Characterization methods which are sensitive to defects often require well-defined samples with long range order. Photoelectron spectroscopy (PES) combined with photoluminescence (PL) or electrical measurements is a potential approach to elucidate the structure and defects of the interface. It is essential to combine the PES with complementary measurements of similar samples to relate the PES changes to changes in the interface defect density. Understanding of the nature of defects related to III-V materials is relevant to developing for example field-effect transistors which include a III-V channel, but research is still far from complete. In this thesis, PES measurements are utilized in studies of various III-V compound semiconductor materials. PES is combined with photoluminescence measurements to study the SiO2/GaAs, SiNx/GaAs and BaO/GaAs interfaces. Also the formation of novel materials InN and photoluminescent GaAs nanoparticles are studied. Finally, the formation of Ga interstitial defects in GaAsN is elucidated by combining calculational results with PES measurements.

Track of HSMS Sophia tracing the extent of navigable water along the main northern ice between Spitzbergen and Greenland September 1868 : also showing the nature of the ice and temperature and depth of the sea

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Geological map of Europe exhibiting the different systems of rocks according to the most recent researches and inedited materials by Roderick I. Murchison and James Nicol ; constructed by A. Keith Johnston

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Johdon mittariston kehittäminen

Tämän diplomityön tarkoituksena on tarjota yritykselle ratkaisu talouden seu-rantaan reaaliaikaisesti. Nykyaikaisessa maailmassa yrityksen on kehitettävä toimintaansa jatkuvasti toimintaansa pysyäkseen kilpailussa mukana. Yrityksen toiminnan kehittämisen taustalla ovat myös muuttuneet omistussuhteet ja yri-tyksen uuden pääomistajan kiinnostus seurata taloutta reaaliaikaisemmin. Diplomityössä yritykselle tarjottavat ratkaisut tuotetaan teorian ja yritykseltä saadun tiedon yhdistämisellä. Teoriaosuudessa käydään erilaiset ratkaisumallit perusteluineen läpi. Empiirisessä osassa sovelletaan teoriaosa käytäntöön. Lop-putuloksena yrityksen johdolle tarjotaan valmiita työkaluja talouden seurantaan. Työn tulosten luotettavuus perustuu kirjoittajan laajaan yrityksen tuntemukseen, sekä avoimiin keskusteluihin yrityksen ylimmän johdon kanssa. Yritysjohto an-toi työssä käyttöön kaiken mahdollisen, hyvin salaisenkin materiaalin käyttöön, työn mahdollisimman hyvän lopputuloksen saamiseksi. Pääasiallisen lopputuloksena luotiin sähköinen tuntiseurantalomake, jota nimetyt henkilöt pystyvät seuraamaan reaaliaikaisesti internetin avulla. Yritykselle mää-ritettiin olennaisimmat taloudenmittarit, joita yrityksen tulee seurata ja päivittää määritellyin aikavälein, lisäksi määrättiin vastuu alueet, kenelle asioiden päivitys kuuluu. Lisäksi luotiin avainlukujen seurantatyökalupohja, jonne on kerätty kaikki yrityksen toiminnan kannalta tärkeimmät tiedot. Työkalut ovat valmiina käyttöönotettavaksi. Lopullinen luodun ohjelman hyödyntäminen ja käyttöönot-to tapahtuu myöhemmin.

Weld joint characteristics by nano-materials addition

The need for industries to remain competitive in the welding business, has created necessity to develop innovative processes that can exceed customer’s demand. Significant development in improving weld efficiency, during the past decades, still have their drawbacks, specifically in the weld strength properties. The recent innovative technologies have created smallest possible solid material known as nanomaterial and their introduction in welding production has improved the weld strength properties and to overcome unstable microstructures in the weld. This study utilizes a qualitative research method, to elaborate the methods of introducing nanomaterial to the weldments and the characteristic of the welds produced by different welding processes. The study mainly focuses on changes in the microstructural formation and strength properties on the welded joint and also discusses those factors influencing such improvements, due to the addition of nanomaterials. The effect of nanomaterial addition in welding process modifies the physics of joining region, thereby, resulting in significant improvement in the strength properties, with stable microstructure in the weld. The addition of nanomaterials in the welding processes are, through coating on base metal, addition in filler metal and utilizing nanostructured base metal. However, due to its insignificant size, the addition of nanomaterials directly to the weld, would poses complications. The factors having major influence on the joint integrity are dispersion of nanomaterials, characteristics of the nanomaterials, quantity of nanomaterials and selection of nanomaterials. The addition of nanomaterials does not affect the fundamental properties and characteristics of base metals and the filler metal. However, in some cases, the addition of nanomaterials lead to the deterioration of the joint properties by unstable microstructural formations. Still research are ongoing to achieve high joint integrity, in various materials through different welding processes and also on other factors that influence the joint strength.

Nichesourcing The Uralic Languages For The Benefit Of Linguistic Research And Lingual Societies

The emerging technologies have recently challenged the libraries to reconsider their role as a mere mediator between the collections, researchers, and wider audiences (Sula, 2013), and libraries, especially the nationwide institutions like national libraries, haven’t always managed to face the challenge (Nygren et al., 2014). In the Digitization Project of Kindred Languages, the National Library of Finland has become a node that connects the partners to interplay and work for shared goals and objectives. In this paper, I will be drawing a picture of the crowdsourcing methods that have been established during the project to support both linguistic research and lingual diversity. The National Library of Finland has been executing the Digitization Project of Kindred Languages since 2012. The project seeks to digitize and publish approximately 1,200 monograph titles and more than 100 newspapers titles in various, and in some cases endangered Uralic languages. Once the digitization has been completed in 2015, the Fenno-Ugrica online collection will consist of 110,000 monograph pages and around 90,000 newspaper pages to which all users will have open access regardless of their place of residence. The majority of the digitized literature was originally published in the 1920s and 1930s in the Soviet Union, and it was the genesis and consolidation period of literary languages. This was the era when many Uralic languages were converted into media of popular education, enlightenment, and dissemination of information pertinent to the developing political agenda of the Soviet state. The ‘deluge’ of popular literature in the 1920s to 1930s suddenly challenged the lexical orthographic norms of the limited ecclesiastical publications from the 1880s onward. Newspapers were now written in orthographies and in word forms that the locals would understand. Textbooks were written to address the separate needs of both adults and children. New concepts were introduced in the language. This was the beginning of a renaissance and period of enlightenment (Rueter, 2013). The linguistically oriented population can also find writings to their delight, especially lexical items specific to a given publication, and orthographically documented specifics of phonetics. The project is financially supported by the Kone Foundation in Helsinki and is part of the Foundation’s Language Programme. One of the key objectives of the Kone Foundation Language Programme is to support a culture of openness and interaction in linguistic research, but also to promote citizen science as a tool for the participation of the language community in research. In addition to sharing this aspiration, our objective within the Language Programme is to make sure that old and new corpora in Uralic languages are made available for the open and interactive use of the academic community as well as the language societies. Wordlists are available in 17 languages, but without tokenization, lemmatization, and so on. This approach was verified with the scholars, and we consider the wordlists as raw data for linguists. Our data is used for creating the morphological analyzers and online dictionaries at the Helsinki and Tromsø Universities, for instance. In order to reach the targets, we will produce not only the digitized materials but also their development tools for supporting linguistic research and citizen science. The Digitization Project of Kindred Languages is thus linked with the research of language technology. The mission is to improve the usage and usability of digitized content. During the project, we have advanced methods that will refine the raw data for further use, especially in the linguistic research. How does the library meet the objectives, which appears to be beyond its traditional playground? The written materials from this period are a gold mine, so how could we retrieve these hidden treasures of languages out of the stack that contains more than 200,000 pages of literature in various Uralic languages? The problem is that the machined-encoded text (OCR) contains often too many mistakes to be used as such in research. The mistakes in OCRed texts must be corrected. For enhancing the OCRed texts, the National Library of Finland developed an open-source code OCR editor that enabled the editing of machine-encoded text for the benefit of linguistic research. This tool was necessary to implement, since these rare and peripheral prints did often include already perished characters, which are sadly neglected by the modern OCR software developers, but belong to the historical context of kindred languages and thus are an essential part of the linguistic heritage (van Hemel, 2014). Our crowdsourcing tool application is essentially an editor of Alto XML format. It consists of a back-end for managing users, permissions, and files, communicating through a REST API with a front-end interface—that is, the actual editor for correcting the OCRed text. The enhanced XML files can be retrieved from the Fenno-Ugrica collection for further purposes. Could the crowd do this work to support the academic research? The challenge in crowdsourcing lies in its nature. The targets in the traditional crowdsourcing have often been split into several microtasks that do not require any special skills from the anonymous people, a faceless crowd. This way of crowdsourcing may produce quantitative results, but from the research’s point of view, there is a danger that the needs of linguists are not necessarily met. Also, the remarkable downside is the lack of shared goal or the social affinity. There is no reward in the traditional methods of crowdsourcing (de Boer et al., 2012). Also, there has been criticism that digital humanities makes the humanities too data-driven and oriented towards quantitative methods, losing the values of critical qualitative methods (Fish, 2012). And on top of that, the downsides of the traditional crowdsourcing become more imminent when you leave the Anglophone world. Our potential crowd is geographically scattered in Russia. This crowd is linguistically heterogeneous, speaking 17 different languages. In many cases languages are close to extinction or longing for language revitalization, and the native speakers do not always have Internet access, so an open call for crowdsourcing would not have produced appeasing results for linguists. Thus, one has to identify carefully the potential niches to complete the needed tasks. When using the help of a crowd in a project that is aiming to support both linguistic research and survival of endangered languages, the approach has to be a different one. In nichesourcing, the tasks are distributed amongst a small crowd of citizen scientists (communities). Although communities provide smaller pools to draw resources, their specific richness in skill is suited for complex tasks with high-quality product expectations found in nichesourcing. Communities have a purpose and identity, and their regular interaction engenders social trust and reputation. These communities can correspond to research more precisely (de Boer et al., 2012). Instead of repetitive and rather trivial tasks, we are trying to utilize the knowledge and skills of citizen scientists to provide qualitative results. In nichesourcing, we hand in such assignments that would precisely fill the gaps in linguistic research. A typical task would be editing and collecting the words in such fields of vocabularies where the researchers do require more information. For instance, there is lack of Hill Mari words and terminology in anatomy. We have digitized the books in medicine, and we could try to track the words related to human organs by assigning the citizen scientists to edit and collect words with the OCR editor. From the nichesourcing’s perspective, it is essential that altruism play a central role when the language communities are involved. In nichesourcing, our goal is to reach a certain level of interplay, where the language communities would benefit from the results. For instance, the corrected words in Ingrian will be added to an online dictionary, which is made freely available for the public, so the society can benefit, too. This objective of interplay can be understood as an aspiration to support the endangered languages and the maintenance of lingual diversity, but also as a servant of ‘two masters’: research and society.

Nichesourcing for the benefit of linguistic research and native speakers

The National Library of Finland is implementing the Digitization Project of Kindred Languages in 2012–16. Within the project we will digitize materials in the Uralic languages as well as develop tools to support linguistic research and citizen science. Through this project, researchers will gain access to new corpora 329 and to which all users will have open access regardless of their place of residence. Our objective is to make sure that the new corpora are made available for the open and interactive use of both the academic community and the language societies as a whole. The project seeks to digitize and publish approximately 1200 monograph titles and more than 100 newspapers titles in various Uralic languages. The digitization will be completed by the early of 2015, when the Fenno-Ugrica collection would contain around 200 000 pages of editable text. The researchers cannot spend so much time with the material that they could retrieve a satisfactory amount of edited words, so the participation of a crowd in editing work is needed. Often the targets in crowdsourcing have been split into several microtasks that do not require any special skills from the anonymous people, a faceless crowd. This way of crowdsourcing may produce quantitative results, but from the research’s point of view, there is a danger that the needs of linguistic research are not necessarily met. Also, the number of pages is too high to deal with. The remarkable downside is the lack of shared goal or social affinity. There is no reward in traditional methods of crowdsourcing. Nichesourcing is a specific type of crowdsourcing where tasks are distributed amongst a small crowd of citizen scientists (communities). Although communities provide smaller pools to draw resources, their specific richness in skill is suited for the complex tasks with high-quality product expectations found in nichesourcing. Communities have purpose, identity and their regular interactions engenders social trust and reputation. These communities can correspond to research more precisely. Instead of repetitive and rather trivial tasks, we are trying to utilize the knowledge and skills of citizen scientists to provide qualitative results. Some selection must be made, since we are not aiming to correct all 200,000 pages which we have digitized, but give such assignments to citizen scientists that would precisely fill the gaps in linguistic research. A typical task would editing and collecting the words in such fields of vocabularies, where the researchers do require more information. For instance, there’s a lack of Hill Mari words in anatomy. We have digitized the books in medicine and we could try to track the words related to human organs by assigning the citizen scientists to edit and collect words with OCR editor. From the nichesourcing’s perspective, it is essential that the altruism plays a central role, when the language communities involve. Upon the nichesourcing, our goal is to reach a certain level of interplay, where the language communities would benefit on the results. For instance, the corrected words in Ingrian will be added onto the online dictionary, which is made freely available for the public and the society can benefit too. This objective of interplay can be understood as an aspiration to support the endangered languages and the maintenance of lingual diversity, but also as a servant of “two masters”, the research and the society.

Fiber-reinforced composite fixed dental prostheses: Studies of the materials used as pontics

Fiber-reinforced composite fixed dental prostheses – Studies of the materials used as pontics University of Turku, Faculty of Medicine, Institute of Dentistry, Department of Biomaterials Science, Finnish Doctoral Program in Oral Sciences – FINDOS, Annales Universitatis Turkuensis, Turku, Finland 2015 Fiber-reinforced composites (FRC), a non-metallic biomaterial, represent a suitable alternative in prosthetic dentistry when used as a component of fixed dental prostheses (FDPs). Some drawbacks have been identified in the clinical performance of FRC restorations, such as delamination of the veneering material and fracture of the pontic. Therefore, the current series of studies were performed to investigate the possibilities of enhancing the mechanical and physical properties of FRC FDPs by improving the materials used as pontics, to then heighten their longevity. Four experiments showed the importance of the pontic design and surface treatment in the performance of FRC FDPs. In the first, the load-bearing capacities of inlay-retained FRC FDPs with pontics of various materials and thicknesses were evaluated. Three different pontic materials were assessed with different FRC framework vertical positioning. Thicker pontics showed increased load-bearing capacities, especially ceramic pontics. A second study was completed investigating the influence of the chemical conditioning of the ridge-lap surface of acrylic resin denture teeth on their bonding to a composite resin. Increased shear bond strength demonstrated the positive influence of the pretreatment of the acrylic surfaces, indicating dissolution of the denture surfaces, and suggesting potential penetration of the monomer systems into the surface of denture teeth. A third study analyzed the penetration depth of different monomer systems on the acrylic resin denture teeth surfaces. The possibility of establishing a durable bond between acrylic pontics and FRC frameworks was demonstrated by the ability of monomers to penetrate the surface of acrylic resin denture teeth, measured by a confocal scanning type microscope. A fourth study was designed to evaluate the load-bearing capacities of FRC FDPs using the findings of the previous three studies. In this case, the performance of pre-shaped acrylic resin denture teeth used as pontics with different composite resins as filling materials was evaluated. The filling material influenced the load-bearing capacities, providing more durable FRC FDPs. It can be concluded that the mechanical and physical properties of FRC FDPs can be improved as has been shown in the development of this thesis. The improvements reported then might provide long lasting prosthetic solutions of this kind, positioning them as potentially permanent rehabilitation treatments. Key words: fiber-reinforced composite, fixed dental prostheses, inlay-retained bridges, adhesion, acrylic resin denture teeth, dental material.

A method to determine volatile contaminants in polyethylene terephthalate (PET) packages by HDC-GC-FID and its application to post-consumer materials

A simple and low cost method to determine volatile contaminants in post-consumer recycled PET flakes was developed and validated by Headspace Dynamic Concentration and Gas Chromatography-Flame Ionization Detection (HDC-GC-FID). The analytical parameters evaluated by using surrogates include: correlation coefficient, detection limit, quantification limit, accuracy, intra-assay precision, and inter-assay precision. In order to compare the efficiency of the proposed method to recognized automated techniques, post-consumer PET packaging samples collected in Brazil were used. GC-MS was used to confirm the identity of the substances identified in the PET packaging. Some of the identified contaminants were estimated in the post-consumer material at concentrations higher than 220 ng.g-1. The findings in this work corroborate data available in the scientific literature pointing out the suitability of the proposed analytical method.

Effect of adding unconventional raw materials on the technological properties of rice fresh pasta

The aim of this study was to develop fettuccini type rice fresh pasta by cold extrusion. To produce the pasta, a 2² Central Composite Rotational Design was used, in which the effects of the addition of pre-gelatinized rice flour - PGRF (0-60%) and modified egg albumin - MEA (0-10%) were studied. The dependent variables were the results of the cooking test and of the instrumental texture. The optimum cooking time for all of the formulations of rice fresh pasta was 3 minutes. MEA had a greater effect on increasing the weight of the pasta when compared to that of PGRF. It was found that with the addition of PGRF increase in loss of solids in cooking water, whereas MEA exerted the opposite effect on this parameter. Moreover, the maximum value of MEA (10%) had an optimum effect on pasta firmness, while PGRF had a negative effect on this parameter. The maximum values of PGRF and MEA reduced the stickiness of the pasta. Based on these results and on the parameters considered as most important, the rice pasta with the best technological characteristics was that with the maximum levels of MEA (10%) and no addition of PGRF (0%). This product was submitted to sensory and microbiological analyses, with good results.

Characterization of new sources of derivative starches as wall materials of essential oil by spray drying

Starch derivatives of taro (Colocasia esculenta L. Schott) and rice were characterized as wall materials of orange oil (d-limonene) by spray drying. Native starches were initially hydrolyzed with HCl and then esterified. Succinylated starches were modified using a conventional method in a slurry and were extruded; whereas, the phosphorylated starches were modified using the extrusion process. Viscosity and solubility of starches reduced after acid hydrolysis, derivatization, and extrusion. The particle size of the wall materials ranged between 20.05 and 31.81 µm. The encapsulation efficiency of the phosphorylated taro, rice, and waxy corn starches was 96.9, 96.8 and 97.1% respectively, and 98.6, 98.1, and 98.8% for succynilated taro, rice, and waxy corn starches, respectively. Starch derivatives of taro and rice could potentially be used as wall materials of orange oil d-limonene.

Effect of different covering materials used during the pre-harvest stage on the quality and storage life of 'Sultana Seedless' grapes

Covering the grapevine rows to delay the maturity and harvest date became widely practiced in 'Sultana Seedless' vineyards. The research work was conducted to test different cover materials (polypropylene cross-stitch, life pack, mogul and transparent polyethylene) in respect to their effects on grape quality and storability. Harvest was delayed for one month in covered plots. Harvested grapes were packed and transferred to storage rooms after pre-cooling. During packing, the grape clusters were sealed in PE bags with sulphur dioxide pads. The grapes were stored for 90 days in the first year and 120 days in the second year, at -0.5ºC and 90% RH. All the grape clusters were healthy and of marketable quality after 90 days of storage period. In the first year, at the end of the storage, only those grapes harvested from the rows covered with polypropylene cross-stitch showed fungal growth. The sensory quality scores revealed a lower level of preference after 120 days of storage. The effects of the covering materials tested were similar regarding grape quality and storage performance except the transparent polyethylene that damaged the grapevine leaves.