Assessment of Energy Conservation in Indian Cement Industry and Forecasting of Co2 Emissions

Cement industry ranks 2nd in energy consumption among the industries in India. It is one of the major emitter of CO2, due to combustion of fossil fuel and calcination process. As the huge amount of CO2 emissions cause severe environment problems, the efficient and effective utilization of energy is a major concern in Indian cement industry. The main objective of the research work is to assess the energy cosumption and energy conservation of the Indian cement industry and to predict future trends in cement production and reduction of CO2 emissions. In order to achieve this objective, a detailed energy and exergy analysis of a typical cement plant in Kerala was carried out. The data on fuel usage, electricity consumption, amount of clinker and cement production were also collected from a few selected cement industries in India for the period 2001 - 2010 and the CO2 emissions were estimated. A complete decomposition method was used for the analysis of change in CO2 emissions during the period 2001 - 2010 by categorising the cement industries according to the specific thermal energy consumption. A basic forecasting model for the cement production trend was developed by using the system dynamic approach and the model was validated with the data collected from the selected cement industries. The cement production and CO2 emissions from the industries were also predicted with the base year as 2010. The sensitivity analysis of the forecasting model was conducted and found satisfactory. The model was then modified for the total cement production in India to predict the cement production and CO2 emissions for the next 21 years under three different scenarios. The parmeters that influence CO2 emissions like population and GDP growth rate, demand of cement and its production, clinker consumption and energy utilization are incorporated in these scenarios. The existing growth rate of the population and cement production in the year 2010 were used in the baseline scenario. In the scenario-1 (S1) the growth rate of population was assumed to be gradually decreasing and finally reach zero by the year 2030, while in scenario-2 (S2) a faster decline in the growth rate was assumed such that zero growth rate is achieved in the year 2020. The mitigation strategiesfor the reduction of CO2 emissions from the cement production were identified and analyzed in the energy management scenarioThe energy and exergy analysis of the raw mill of the cement plant revealed that the exergy utilization was worse than energy utilization. The energy analysis of the kiln system showed that around 38% of heat energy is wasted through exhaust gases of the preheater and cooler of the kiln sysetm. This could be recovered by the waste heat recovery system. A secondary insulation shell was also recommended for the kiln in the plant in order to prevent heat loss and enhance the efficiency of the plant. The decomposition analysis of the change in CO2 emissions during 2001- 2010 showed that the activity effect was the main factor for CO2 emissions for the cement industries since it is directly dependent on economic growth of the country. The forecasting model showed that 15.22% and 29.44% of CO2 emissions reduction can be achieved by the year 2030 in scenario- (S1) and scenario-2 (S2) respectively. In analysing the energy management scenario, it was assumed that 25% of electrical energy supply to the cement plants is replaced by renewable energy. The analysis revealed that the recovery of waste heat and the use of renewable energy could lead to decline in CO2 emissions 7.1% for baseline scenario, 10.9 % in scenario-1 (S1) and 11.16% in scenario-2 (S2) in 2030. The combined scenario considering population stabilization by the year 2020, 25% of contribution from renewable energy sources of the cement industry and 38% thermal energy from the waste heat streams shows that CO2 emissions from Indian cement industry could be reduced by nearly 37% in the year 2030. This would reduce a substantial level of greenhouse gas load to the environment. The cement industry will remain one of the critical sectors for India to meet its CO2 emissions reduction target. India’s cement production will continue to grow in the near future due to its GDP growth. The control of population, improvement in plant efficiency and use of renewable energy are the important options for the mitigation of CO2 emissions from Indian cement industries

Community Participation in Ecotourism: An Inclusive Development Option for Kerala

The inferences obtained from the study are presented in coherent area-specific levels so as to understand the ecotourism and its sub-sector areas for the researchers and policy makers about the issues, importances and potentialities of the sector. An analysis of the tourism sector in Kerala has shown tremendous growth both in terms of tourist arrivals and in terms of revenue generation from direct and indirect sources. The foreign tourist visitors in Kerala in 2014 was 9,23,336 which shows 7.60 percent increase from the last year and the domestic tourist visitors were 1,16,95,411 which again shows 7.71 percent increase, is a clear evidence of its potential. In 2014 the industry contributed revenue of 24885.44 crores from direct and indirect sources giving rise to an increase of 12.11 percent from the last year. A dichotomy of tourists and ecotourists shows that tourists in the ecotourism destinations come to 42.6 percent of the total, shows the scope, significance and its potential. Correlation of zone-wise tourist arrivals based on the ecotourism destinations highlights the fact that with only 19 of the 64 destinations that come in the central zone are the most preferred centres (around 54 percent) for the domestic as well as foreign tourists. The north zone encompassing 6 districts with rich biodiversity shows that the tourists‟ arrival patterns exhibit less promising results. Though the north zone has 31 ecotourism destinations of the state receives only 6.19 percent of the foreign visitors. The ecotourism activities in the state are primarily managed by the Eco-Development Committees (EDCs) and the Vana Samrakshana Samithies (VSS) under the Forest Development Agency of Kerala. Social class-wise categorization of membership shows that 13142 families have membership in 190 EDCs with SC (28 percent), ST (33 percent) and other marginalised communities (39 percent). But this in the VSS shows that 400 VSS have 59085 members actively engaged in ecotourism activities and social category of the VSS makes clear that majority are from the other marginalized fringe households with 62 percent where as the participation of SC is 12 percent and ST is 26 percent. An evaluation of the socio-economic and demographic matrix of the community members involved in ecotourism activities brings out region specific differences. About 75.70 percent of the respondents are males and the rest are females. Majority of the respondents (about 60 percent) are in the age group of 20 to 40 years, followed by the age group of 40-50 (20 percent). The average age of respondents in the three zones is between 35 and 37 years. The majority of the respondents are married, a few are unmarried. Average family size is 4-5 members and differences are identified among zones. Average number of adults per household is 3 and child per household is 2. Majority have an education of 10th class and below i.e. about 60 percent of the sample have only basic school education like primary, secondary and high school (i.e. up to SSLC but not passed) level. About 18 percent are SSLC passed, 10 percent are undergraduates whereas 6 percent constitute respondents having qualification of graduation and above. Majority of the „graduates and above‟ are from south and central zone. Inter-zone differences in educational profile are also identified with lesser number of „graduates and above‟ are identified in the north zone compared to the other two zones. Investigating into the income and livelihood options of the respondents gives insight about the prominence of ecotourism as an employment and livelihood option for the community members, as more than 90 percent of the respondents have cited tourism sector as their main employment option. Most (49.30 percent) of respondents get 100 percent income from tourism related activities, followed by 37.30 percent of community members have income between 75-99 percent from tourism whereas the rest (13 percent) have less than 74 percent of their income from tourism and there exists difference between zones and percentage of income. Financial habit shows that about 49.7 percent hold active bank accounts, 61 percent have savings behaviour and 73.8 percent have indebtedness. Analysis about the ownership of house brings to light that 37 percent of respondents live in their own house followed by 25.7 percent in government funded/provided house and 21 percent in their parent‟s house and 3.5 percent in rented house. About 12 percent of the respondents have other kinds of accommodation facilities such as staff quarters, etc. But in the case of north zone majority i.e. 52 percent primarily depend on the government funded house indicating the effectiveness of government housing programme. Standard of living measured in SLI frameworks shows that majority of the respondents have medium SLI values (42.3 percent); the remaining 47.7 percent have low SLI and 10 percent have high SLI. The community members have been benefitted immensely from forest and its resources. Since the ecotourism destinations are located amidst the wildlife settings, majority of them depend on forest for their livelihood. The information on the tourist‟s demographic characteristics like age, sex, educational qualification and annual income show that the age category of domestic and foreign tourists falls below the age group of less than 35 years (about 65 percent), whereas only 16 percent of tourists are aged above 46 years. The age group below 25 years consists of more international tourists (31.3 percent) compared to the proportion of domestic tourists (12.5 percent). Male-female ratio shows that the males constitute 56 percent of the sample and females with 44 percent. The factors determining the impact of ecotourism programmes in the community was evaluated with the aid of a factor analysis with 12 selected statements. The worries and concerns of the community members about the impact of ecotourism on the environment are well understood from this analysis. It can be drawn that environment protection and the role of ecotourism in improving the income and livelihood options of the local communities is the most important factor concerning the community members.

Doing Time in the Retail Industry

This paper uses survey data to explore employee satisfaction with working time arrangements within a large supermarket chain in Queensland. The findings confirm those in the literature that employees have a diverse range of working time preferences, and that employees will be more satisfied if those preferences are met by their employer. In general, many full-time employees wanted shorter hours and a sizeable proportion of part-time employees wanted longer working hours. This paper is a preliminary attempt at teasing out the explanations behind working time preferences.

An investigation into the barriers to the implementation of automation and robotics technologies in the construction industry

The rising problems associated with construction such as decreasing quality and productivity, labour shortages, occupational safety, and inferior working conditions have opened the possibility of more revolutionary solutions within the industry. One prospective option is in the implementation of innovative technologies such as automation and robotics, which has the potential to improve the industry in terms of productivity, safety and quality. The construction work site could, theoretically, be contained in a safer environment, with more efficient execution of the work, greater consistency of the outcome and higher level of control over the production process. By identifying the barriers to construction automation and robotics implementation in construction, and investigating ways in which to overcome them, contributions could be made in terms of better understanding and facilitating, where relevant, greater use of these technologies in the construction industry so as to promote its efficiency. This research aims to ascertain and explain the barriers to construction automation and robotics implementation by exploring and establishing the relationship between characteristics of the construction industry and attributes of existing construction automation and robotics technologies to level of usage and implementation in three selected countries; Japan, Australia and Malaysia. These three countries were chosen as their construction industry characteristics provide contrast in terms of culture, gross domestic product, technology application, organisational structure and labour policies. This research uses a mixed method approach of gathering data, both quantitative and qualitative, by employing a questionnaire survey and an interview schedule; using a wide range of sample from management through to on-site users, working in a range of small (less than AUD0.2million) to large companies (more than AUD500million), and involved in a broad range of business types and construction sectors. Detailed quantitative (statistical) and qualitative (content) data analysis is performed to provide a set of descriptions, relationships, and differences. The statistical tests selected for use include cross-tabulations, bivariate and multivariate analysis for investigating possible relationships between variables; and Kruskal-Wallis and Mann Whitney U test of independent samples for hypothesis testing and inferring the research sample to the construction industry population. Findings and conclusions arising from the research work which include the ranking schemes produced for four key areas of, the construction attributes on level of usage; barrier variables; differing levels of usage between countries; and future trends, have established a number of potential areas that could impact the level of implementation both globally and for individual countries.

Evaluating equal employment opportunity and its impact on the increased participation of men and women in the transport industry

This paper seeks to identify the approaches undertaken in implementing equal employment opportunity in the transport industry in Australia and the links between these approaches and indicators of increased participation of women. This male dominated industry employs limited numbers of women with fewer numbers of women in management. The study analyses data from a unique set of equal opportunity progress reports from all organisations in the transport industry that are required to provide public reports under Australian legislation. The findings indicate a correlation between some approaches to equal opportunity and increased numbers of women in some areas. The study is equally remarkable for what it does not find. Despite widespread equal opportunity implementation across a broad number of employment measures there are limited measures that predict increases in the numbers of women in management or in non-traditional roles. This study differs from others in that it identifies issues specific to one industry and links organisational approach to equal opportunity with the employment status of both women and men.

Uptake of an OHS code of practice by construction firms : barriers and enablers in an Australian industry

The Australian construction industry, reflecting a global trend, is moving towards the implementation of a voluntary code of practice (hereafter VCP) for occupational health and safety. The evidence suggests that highlyvisible clients and project management firms, in addition to their subcontractors, look set to embrace such a code. However, smaller firms not operating in high-profile contracting regimes may prove reticent to adopt a VCP. This paper incorporates qualitative data from a high-profile research project commissioned by Engineers Australia and supported by the Australian Contractors’ Association, Property Council of Australia, Royal Australian Institute of Architects, Association of Consulting Engineers Australia, Australian Procurement and Construction Council, Master Builders Australia and the Australian CRC for Construction Innovation. The paper aims to understand the factors that facilitate or prevent the uptake of the VCP by smaller firms, together with pathways to the adoption of a VCP by industry.

Safer construction : the development of a voluntary code of practice to improve safety performance in the Australian construction industry

In Australia, between 1994 and 2000, 50 construction workers were killed each year as a result of their work, the industry fatality rate, at 10.4 per 100,000 persons, is similar to the national road toll fatality rate and the rate of serious injury is 50% higher than the all industries average. This poor performance represents a significant threat to the industry’s social sustainability. Despite the best efforts of regulators and policy makers at both State and Federal levels, the incidence of death, injury and illness in the Australian construction industry has remained intransigently high, prompting an industry-led initiative to improve the occupational health and safety (OHS) performance of the Australian construction industry. The ‘Safer Construction’ project involves the development of an evidence-based Voluntary Code of Practice for OHS in the industry.

Investigating the role of ICT in improving productivity in construction supply chains in Australian construction industry.

The Australian construction industry is a fragmented and profoundly competitive industry with high levels of subcontracting resulting in complex supply chain formations. Traditional methods and forms of communication are being proven as inefficient and losing their charm while participants face heavy volumes of communications that often occurs on a daily basis between trading partners in a supply chain on projects. Information Communication Technologies (ICT), due to their robustness and the ability to quickly disseminate data/information, have the capacity to address highlighted communication issues in a structured and an efficient manner. Timesavings produced by these can be directly translated in terms of productivity gain. This paper presents perceptions of subcontractors working in the construction industry in Melbourne Australia on the use of ICT obtained through an exploratory study.

Discourse practice gaps in work life balance : comparative case studies in the Australian construction industry

Perspectives on work-life balance (WLB) reflected in political, media and organisational discourse, would maintain that WLB is on the agenda because of broad social, economic and political factors (Fleetwood 2007). In contrast, critical scholarship which examines work-life balance (WLB) and its associated practices maintains that workplace flexibility is more than a quasi-functionalist response to contemporary problems faced by individuals, families or organisations. For example, the literature identifies where flexible work arrangements have not lived up to expectations of a panacea for work-home conflicts, being characterised as much by employer-driven working conditions that disadvantage workers and constrain balance, as they are by employee friendly practices that enable it (Charlesworth 1997). Further, even where generous organisational work-life balance policies exist, under-utilisation is an issue (Schaefer et al, 2007). Compounding these issues is that many employees perceive their paid work as becoming more intense, pressured and demanding (Townsend et al 2003).

Innovative Practices in the Australian Built Environment Sector : An Information Resource for Industry

PROJECT BRIEF Information provided by the Built Environment Industry Innovation Council as background to this project includes the following information on construction and innovation within the industry. • The construction industry contributes around $67 billion to GDP and employs around 970,000 and generates exports of nearly $150 million. • The industry has one of the lowest innovation rates of any industry in Australia, ranking third last across all Australian industries in terms of its proportion of business expenditure on innovation, and second last in terms of the proportion of income generated from innovation (ABS, 2006). • Key innovation challenges include addressing energy and water use efficiency, and housing costs in preparing for the implementation of the Carbon Pollution Reduction Scheme. The sector will need to build its capability and capacity to deliver the technical and operational expertise required.The broader Built Environment Innovation Project aims to address the following two objectives: 1. Identify current innovative practice across the Built Environment industry. 2. Develop a knowledge exchange strategy for this information to be disseminated to all industry stakeholders. Industry practice issues are critical to the built environment industry’s ability to innovate, and the BRITE project from the CRC for Construction Innovation has previously undertaken work to identify the key factors that drive innovation. Part 1 of the current project aims to extend this work by conducting a stocktake of current and emerging innovative practices within the built environment industry. Part 2 of the project addresses the second of these objectives, that is, to recommend a knowledge exchange strategy for promoting the wider uptake of innovative practices that makes the information identified in Part 1 of the study (on emerging innovative practices) accessible to Australian built environment industry stakeholders. The project brief was for the strategy to include a mechanism to enable this information resource to be updated as new initiatives/practices are developed. A better understanding of the built environment industry’s own knowledge infrastructure also has the potential to enhance innovation outcomes for the industry. This project will develop a coordinated knowledge exchange strategy, informed by the best available information on current innovation practices within the industry and suggest directions for gaining a better understanding of: the industry contexts that lead to innovative practices; the industry (including enterprise and individual) drivers for innovation; and appropriate knowledge exchange pathways for delivering future industry innovation. A deliverable of Part 2 will be a recommendation for a knowledge exchange strategy to accelerate adoption of innovative practices in the built environment industry, including resource implications and how such a recommendation could be taken forward as an ongoing resource.