Modified Blalock Taussig shunt: a not-so-simple palliative procedure.

OBJECTIVES: Thirty-two consecutive isolated modified Blalock Taussig (BT) shunts performed in infancy since 2004 were reviewed and analysed to identify the risk factors for shunt intervention and mortality. METHODS: Sternotomy was the only approach used. Median age and weight were 10.5 (range 1-74) days and 2.9 (1.9-4.4) kg, respectively. Shunt palliation was performed for biventricular hearts (Tetralogy of Fallot/double outlet right ventricle/transposition of great arteries_ventricular septal defect_pulmonary stenosis/pulmonary atresia_ventricular septal defect/others) in 21, and univentricular hearts in 11, patients. Hypoplastic left heart syndrome patients were excluded. Two procedures required cardiopulmonary bypass. Median shunt size was 3.5 (3-4) mm and median shunt size/kg body weight was 1.2 (0.9-1.7) mm/kg. Reduction in shunt size was necessary in 5 of 32 (16%) patients. RESULTS: Three of 32 (9%) patients died after 3 (1-15) days due to cardiorespiratory decompensation. Lower body weight (P = 0.04) and bigger shunt size/kg of body weight (P = 0.004) were significant risk factors for mortality. Acute shunt thrombosis was observed in 3 of 32 (9%), none leading to death. Need for cardiac decongestive therapy was associated with univentricular hearts (P < 0.001), bigger shunt size (P = 0.054) and longer hospital stay (P = 0.005). Twenty-eight patients have undergone a successful shunt takedown at a median age of 5.5 (0.5-11.9) months, without late mortality. CONCLUSIONS: Palliation with a modified BT shunt continues to be indicated despite increased thrust on primary corrective surgery. Though seemingly simple, it is associated with significant morbidity and mortality. Effective over-shunting and acute shunt thrombosis are the lingering problems of shunt therapy.

Evolution of the Pelagonian carbonate platform complex and the adjacent oceanic realm in response to plate tectonic forcing (Late Triassic and Jurassic), Evvoia, Greece

The Late Triassic and Jurassic platform and the oceanic complexes in Evvoia, Greece, share a complementary plate-tectonic evolution. Shallow marine carbonate deposition responded to changing rates of subsidence and uplift, whilst the adjacent ocean underwent spreading, and then convergence, collision and finally obduction over the platform complex. Late Triassic ocean spreading correlated with platform subsidence and the formation of a long-persisting peritidal passive-margin platform. Incipient drowning occurred from the Sinemurian to the late Middle Jurassic. This subsidence correlated with intra-oceanic subduction and plate convergence that led to supra-subduction calc-alkaline magmatism and the formation of a primitive volcanic arc. During the Middle Jurassic, plate collision caused arc uplift above the carbonate compensation depth (CCD) in the oceanic realm, and related thrust-faulting, on the platform, led to sub-aerial exposures. Patch-reefs developed there during the Late Oxfordian to Kimmeridgian. Advanced oceanic nappe-loading caused platform drowning below the CCD during the Tithonian, which is documented by intercalations of reefal turbidites with non-carbonate radiolarites. Radiolarites and bypass-turbidites, consisting of siliciclastic greywacke, terminate the platform succession beneath the emplaced oceanic nappe during late Tithonian to Valanginian time.

Upper Triassic to Cretaceous radiolaria from Nicaragua and northern Costa Rica - The Mesquito composite oceanic terrane

We propose a new terrane subdivision of Nicaragua and Northern Costa Rica, based on Upper Triassic to Upper Cretaceous radiolarian biochronology of ribbon radiolarites, the newly studied Siuna Serpentinite Mélange, and published 40Ar/39Ar dating and geochemistry of mafic and ultramafic igneous rock units of the area. The new Mesquito Composite Oceanic Terrane (MCOT) comprises the southern half of the Chortis Block, that was assumed to be a continental fragment of N-America. The MCOT is defined by 4 corner localities characterized by ultramafic and mafic oceanic rocks and radiolarites of Late Triassic, Jurassic and Early Cretaceous age: 1. The Siuna Serpentinite Mélange (NE-Nicaragua), 2. The El Castillo Mélange (Nicaragua/Costa Rica border), 3.The Santa Elena Ultramafics (N-Costa Rica) and, 4. DSDP Legs 67/84. 1. The Siuna Serpentinite Mélange contains, high pressure metamorphic mafics and Middle Jurassic (Bajocian-Bathonian) radiolarites in original, sedimentary contact with arc-metandesites. The Siuna Mélange also contains Upper Jurassic black detrital chert formed in a marginal (fore-arc?) basin shortly before subduction. A phengite 40Ar/39Ar -cooling age dates the exhumation of the high pressure rocks as 139 Ma (earliest Cretaceous). 2. The El Castillo Mélange comprises a radiolarite block tectonically embedded in serpentinite that yielded a diverse Rhaetian (latest Triassic) radiolarian assemblage, the oldest fossils recovered so far from S-Central America. 3. The Santa Elena Ultramafics of N-Costa Rica together with the serpentinite outcrops near El Castillo (2) in Southern Nicaragua, are the southernmost outcrops of the MCOT. The Santa Elena Unit (3) itself is still undated, but it is thrust onto the middle Cretaceous Santa Rosa Accretionary Complex (SRAC), that contains Lower to Upper Jurassic, highly deformed radiolarite blocks, probably reworked from the MCOT, which was the upper plate with respect to the SRAC. 4. Serpentinites, metagabbros and basalts have long been known from DSDP Leg 67/84 (3), drilled off Guatemala in the Nicaragua-Guatemala forearc basement. They have been restudied and reveal 40Ar/39Ar dated Upper Triassic to middle Cretaceous enriched Ocean Island Basalts and Jurassic to Lower Cretaceous depleted Island arc rocks of probable Pacific origin. The area between localities 1-4 is largely covered by Tertiary to Recent arcs, but we suspect that its basement is made of oceanic/accreted terranes. Earthquake seismic studies indicate an ill-defined, shallow Moho in this area. The MCOT covers most of Nicaragua and could extend to Guatemala to the W and form the Lower (southern) Nicaragua Rise to the NE. Some basement complexes of Jamaica, Hispaniola and Puerto Rico may also belong to the MCOT. The Nicoya Complex s. str. has been regarded as an example of Caribbean crust and the Caribbean Large Igneous Province (CLIP). However, 40Ar/39Ar - dates on basalts and intrusives indicate ages as old as Early Cretaceous. Highly deformed Jurassic and Lower Cretaceous radiolarites occur as blocks within younger intrusives and basalts. Our interpretation is that radiolarites became first accreted to the MCOT, then became reworked into the Nicoya Plateau in Late Cretaceous times. This implies that the Nicoya Plateau formed along the Pacific edge of the MCOT, independent form the CLIP and most probably unrelated with he Galapagos hotspot. No Jurassic radiolarite, no older sediment age than Coniacian-Santonian, and no older 40Ar/39Ar age than 95 Ma is known from S-Central America between SE of Nicoya and Colombia. For us this area represents the trailing edge of the CLIP s. str.

Geology of the NW Indian Himalaya

This review paper deals with the geology of the NW Indian Himalaya situated in the states of Jammu and Kashmir, Himachal Pradesh and Garhwal. The models and mechanisms discussed, concerning the tectonic and metamorphic history of the Himalayan range, are based on a new compilation of a geological map and cross sections, as well as on paleomagnetic, stratigraphic, petrologic, structural, metamorphic, thermobarometric and radiometric data. The protolith of the Himalayan range, the North Indian flexural passive margin of the Neo-Tethys ocean, consists of a Lower Proterozoic basement, intruded by 1.8-1.9 Ga bimodal magmatites, overlain by a horizontally stratified sequence of Upper Proterozoic to Paleocene sediments, intruded by 470-500 Ma old Ordovician mainly peraluminous s-type granites, Carboniferous tholeiitic to alkaline basalts and intruded and overlain by Permian tholeiitic continental flood basalts. No elements of the Archaen crystalline basement of the South Indian shield have been identified in the Himalayan range. Deformation of the Himalayan accretionary wedge resulted from the continental collision of India and Asia beginning some 65-55 Ma ago, after the NE-directed underthrusting of the Neo-Tethys oceanic crust below Asia and the formation of the Andean-type 103-50 (-41) Ma old Ladakh batholith to the north of the Indus Suture. Cylindrical in geometry, the Himalayan range consists, from NE to SW, from older to younger tectonic elements, of the following zones: 1) The 25 km wide Ladakh batholith and the Asian mantle wedge form the backstop of the growing Himalayan accretionary wedge. 2) The Indus Suture zone is composed of obducted slices of the oceanic crust, island arcs, like the Dras arc, overlain by Late Cretaceous fore arc basin sediments and the mainly Paleocene to Early Eocene and Miocene epi-sutural intra-continental Indus molasse. 3) The Late Paleocene to Eocene North Himalayan nappe stack, up to 40 km thick prior to erosion, consists of Upper Proterozoic to Paleocene rocks, with the eclogitic and coesite bearing Tso Morari gneiss nappe at its base. It includes a branch of the Central Himalayan detachment, the 22-18 Ma old Zanskar Shear zone that is intruded and dated by the 22 Ma Gumburanjun leucogranite; it reactivates the frontal thrusts of the SW-verging North Himalayan nappes. 4) The late Eocene-Miocene SW-directed High Himalayan or ``Crystalline'' nappe comprises Upper Proterozoic to Mesozoic sediments and Ordovician granites, identical to those of the North Himalayan nappes. The Main Central thrust at its base was created in a zone of Eocene to Early Oligocene anatexis by ductile detachment of the subducted Indian crust, below the pre-existing 25-35 km thick NE-directed Shikar Beh and SW-directed North Himalayan nappe stacks. 5) The late Miocene Lesser Himalayan thrust with the Main Boundary Thrust at its base consists of early Proterozoic to Cambrian rocks intruded by 1.8-1.9 Ga bimodal magmatites. The Subhimalaya is a thrust wedge of Himalayan fore deep basin sediments, composed of the Early Eocene marine Subathu marls and sandstones as well as the up to 8'000 m-thick Miocene to recent Ganga molasse, a coarsening upwards sequence of shales, sandstones and conglomerates. The active frontal thrust is covered by the sediments of the Indus-Ganga plains.

Plate tectonics of the Altaids

Abstract: The Altaids consist in a huge accretionary-type belt extending from Siberia through Mon-golia, northern China, Kyrgyzstan and Kazakhstan. They were formed from the Vendian through the Jurassic by the accretion of numerous displaced and exotic terranes (e.g. island arc, ribbon microcontinent, seamount, basaltic plateau, back-arc basin). The number, nature and origin of the terranes differ according to the palaeotectonic models of the different authors. Thanks to a geo- dynamic study (i.e. definition of tectonic settings and elaboration of geodynamic scenarios) and plate tectonics modelling, this work aims to present an alternative model explaining the Palaeozoic palaeotectonic evolution of the Altaids. Based on a large set of compiled geological data related to palaeogeography and geodyna¬mic (e.g. sedimentology, stratigraphy, palaeobiogeography, palaeomagnetism, magmatism, me- tamorphism, tectonic...), a partly new classification of the terranes and sutures implicated in the formation of the Altaids is proposed. In the aim to elaborate plate tectonics reconstructions, it is necessary to fragment the present arrangement of continents into consistent geological units. To avoid confusion with existing terminology (e.g. tectonic units, tectono-stratigraphic units, micro- continents, terranes, blocks...), the new concept of "Geodynamic Units (GDU)" was introduced. A terrane may be formed by a set of GDUs. It consists of a continental and/or oceanic fragment which has its own kinematic and geodynamic evolution for a given period. With the same ap-proach, the life span and type of the disappeared oceans is inferred thanks to the study of the mate-rial contained in suture zones. The interpretation of the tectonic settings within the GDUs comple-ted by the restoration of oceans leads to the elaboration of geodynamic scenarios. Since the Wilson cycle was presented in 1967, numerous works demonstrated that the continental growth is more complex and results from diverse geodynamic scenarios. The identification of these scenarios and their exploitation enable to elaborate plate tectonics models. The models are self-constraining (i.e. space and time constraints) and contest or confirm in turn the geodynamic scenarios which were initially proposed. The Altaids can be divided into three domains: (1) the Peri-Siberian, (2) the Kazakhstan, and (3) the Tarim-North China domains. The Peri-Siberian Domain consists of displaced (i.e. Sayan Terrane Tuva-Mongolian, Lake-Khamsara Terrane) and exotic terranes (i.e. Altai-Mongolian and Khangai-Argunsky Terrane) accreted to Siberia from the Vendian through the Ordovician. Fol-lowing the accretion of these terranes, the newly formed Siberia active margin remained active un-til its part collision with the Kazakhstan Superterrane in the Carboniferous. The eastern part of the active margin (i.e. East Mongolia) continued to act until the Permian when the North-China Tarim Superterrane collided with it. The geodynamic evolution of the eastern part of the Peri-Siberian Domain (i.e. Eastern Mongolia and Siberia) is complicated by the opening of the Mongol-Okhotsk Ocean in the Silurian. The Kazakhstan Domain is composed of several continental terranes of East Gondwana origin amalgamated together during the Ordovician-Silurian time. After these different orogenic events, the Kazakhstan Superterrane evolved as a single superterrane until its collision with a Tarim-North China related-terrane (i.e. Tianshan-Hanshan Terrane) and Siberian Continent during the Devonian. This new organisation of the continents imply a continued active margin from Siberia, to North China through the Kazakhstan Superterrane and the closure of the Junggar- Balkash Ocean which implied the oroclinal bending of the Kazakhstan Superterrane during the entire Carboniferous. The formation history of the Tarim-North China Domain is less complex. The Cambrian northern passive margin became active in the Ordovician. In the Silurian, the South Tianshan back-arc Ocean was open and led to the formation of the Tianshan-Hanshan Terrane which collided with the Kazakhstan Superterrane during the Devonian. The collision between Siberia and the eastern part of the Tarim-North China continents (i.e. Inner Mongolia), implied by the closure of the Solonker Ocean, took place in the Permian. Since this time, the major part of the Altaids was formed, the Mongol-Okhotsk Ocean only was still open and closed during the Jurassic. Résumé: La chaîne des Altaïdes est une importante chaîne d'accrétion qui s'étend en Sibérie, Mon-golie, Chine du Nord, Kirghizstan et Kazakhstan. Elle s'est formée durant la période du Vendian au Jurassique par l'accrétion de nombreux terranes déplacés ou exotiques (par exemple arc océa-nique, microcontinent, guyot, plateau basaltique, basin d'arrière-arc...). Le nombre, la nature ou encore l'origine diffèrent selon les modèles paléo-tectoniques proposés par les différents auteurs. Grâce à une étude géodynamique (c'est-à-dire définition des environnements tectoniques et éla-boration de scénarios géodynamiques) et à la modélisation de la tectonique des plaques, ce travail propose un modèle alternatif expliquant l'évolution paléo-tectonique des Altaïdes. Basé sur une large compilation de données géologiques pertinentes en termes de paléo-géographie et de géodynamique (par exemple sédimentologie, stratigraphie, paléo-biogéographie, paléomagnétisme, magmatisme, métamorphisme, tectonique...), une nouvelle classification des terranes et des sutures impliqués dans la formation des Altaïdes est proposée. Dans le but d'élabo¬rer des reconstructions de plaques tectoniques, il est nécessaire de fragmenter l'arrangement actuel des continents en unités tectoniques cohérentes. Afin d'éviter les confusions avec la terminolo¬gie existante (par exemple unité tectonique, unité tectono-stratigraphique, microcontinent, block, terrane...), le nouveau concept d' "Unité Géodynamique (UGD)" a été introduit. Un terrane est formé d'une ou plusieurs UGD et représente un fragment océanique ou continental défini pas sa propre cinétique et évolution géodynamique pour une période donnée. Parallèlement, la durée de vie et le type des océans disparus (c'est-à-dire principal ou secondaire) est déduite grâce à l'étude du matériel contenu dans les zones de sutures. L'interprétation des environnements tectoniques des UGD associés à la restauration des océans mène à l'élaboration de scénarios géodynamiques. Depuis que le Cycle de Wilson a été présenté en 1967, de nombreux travaux ont démontré que la croissance continentale peut résulter de divers scénarios géodynamiques. L'identification et l'ex-ploitation de ces scénarios permet finalement l'élaboration de modèles de tectonique des plaques. Les modèles sont auto-contraignants (c'est-à-dire contraintes spatiales et temporelles) et peuvent soit contester ou confirmer les scénarios géodynamiques initialement proposés. Les Altaïdes peuvent être divisées en trois domaines : (1) le Domaine Péri-Sibérien, (2) le Domaine Kazakh, et (3) le Domaine Tarim-Nord Chinois. Le Domaine Péri-Sibérien est composé de terranes déplacés (c'est-à-dire Terrane du Sayan, Tuva-Mongol et Lake-Khamsara) et exotiques (c'est-à-dire Terrane Altai-Mongol et Khangai-Argunsky) qui ont été accrétés au craton Sibérien durant la période du Vendien à l'Ordovicien. Suite à l'accrétion de ces terranes, la marge sud-est de la Sibérie nouvellement formée reste active jusqu'à sa collision partielle avec le Superterrane Ka-zakh au Carbonifère. La partie est de la marge active (c'est-à-dire Mongolie de l'est) continue son activité jusqu'au Permien lors de sa collision avec le Superterrane Tarim-Nord Chinois. L'évolu¬tion géodynamique de la partie est du Domaine Sibérien est compliquée par l'ouverture Silurienne de l'Océan Mongol-Okhotsk qui disparaîtra seulement au Jurassique. Le Domaine Kazakh est composé de plusieurs terranes d'origine est-Gondwanienne accrétés les uns avec les autres avant ou pendant le Silurien inférieur et leurs evolution successive sous la forme d'un seul superterrane. Le Superterrane Kazakh collisione avec un terrane Tarim-Nord Chinois (c'est-à-dire Terrane du Tianshan-Hanshan) durant le Dévonien et le continent Sibérien au Dévonien supérieur. Ce nouvel agencement des plaques induit une marge active continue le long des continents Sibérien, Kazakh et Nord Chinois et la fermeture de l'Océan Junggar-Balkash qui provoque le plissement oroclinal du Superterrane Kazakh durant le Carbonifère. L'histoire de la formation du Domaine Tarim-Nord Chinois est moins complexe. La marge passive nord Cambrienne devient active à l'Ordovicien et l'ouverture Silurienne du bassin d'arrière-arc du Tianshan sud mène à la formation du terrane du Tianshan-Hanshan. La collision Dévonienne entre ce dernier et le Superterrane Kazakh provoque la fermerture de l'Océan Tianshan sud. Finalement, la collision entre la Sibérie et la partie est du continent Tarim-Nord Chinois (c'est-à-dire Mongolie Intérieure) prend place durant le Permien suite à la fermeture de l'Océan Solonker. La majeure partie des Altaïdes est alors formée, seul l'Océan Mongol-Okhotsk est encore ouvert. Ce dernier se fermera seulement au Jurassique.

The Upper Oligocene of Montgat (Catalan Coastal Ranges, Spain): new age constraints to the western Mediterranean Basin opening

The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.

Origin of a restraining bend in an evolving strike-slip system: The Cenozoic As Pontes basin (NW Spain)

The As Pontes basin (12 km2), NW Iberian Peninsula, is bounded by a double restraining bend of a dextral strike-slip fault, which is related to the western onshore end of the Pyrenean belt. Surface and subsurface data obtained from intensive coal exploration and mining in the basin since the 1960s together with additional structural and stratigraphic sequence analysis allowed us to determine the geometric relationships between tectonic structures and stratigraphic markers. The small size of the basin and the large amount of quality data make the As Pontes basin a unique natural laboratory for improving our understanding of the origin and evolution of restraining bends. The double restraining bend is the end stage of the structural evolution of a compressive underlapping stepover, where the basin was formed. During the first stage (stepover stage), which began ca. 30 Ma ago (latest Rupelian) and lasted 3.4 My, two small isolated basins bounded by thrusts and normal faults were formed. For 1.3 My, the strike-slip faults, which defined the stepover, grew towards each other until joining and forming the double restraining bend, which bounds one large As Pontes basin (transition stage). The history of the basin was controlled by the activity of the double restraining bend for a further 3.4 My (restraining bend stage) and ended in mid-Aquitanian times (ca. 22 Ma).

Stratigraphie, morphodynamique, paléoenvironnements des terrains sédimentaires meubles à forte déclivité du domaine périglaciaire alpin

Dans le contexte d'un climat de plus en plus chaud, une étude « géosystémique » de la répartition du pergélisol dans l'ensemble d'un versant périglaciaire alpin, de la paroi rocheuse jusqu'au glacier rocheux, s'avère primordiale. S'insérant dans cette problématique, ce travail de thèse vise comme objectif général l'étude des versants d'éboulis situés à l'intérieur de la ceinture du pergélisol discontinu selon deux volets de recherche différents : une étude de la stratigraphie et de la répartition du pergélisol dans les éboulis de haute altitude et des processus qui lui sont associés ; une reconstitution de l'histoire paléoenvironnementale du domaine périglaciaire alpin pendant le Tardiglaciaire et l'Holocène. La stratigraphie et la répartition spatiale du pergélisol a été étudiée dans cinq éboulis des Alpes Valaisannes (Suisse), dont trois ont fait l'objet de forages profonds, grâce à la prospection géophysique de détail effectuée à l'aide de méthodes thermiques, de résistivité, sismiques et nucléaires. Les mesures effectuées ont permis de mettre en évidence que, dans les cinq éboulis étudiés, la répartition du pergélisol est discontinue et aucun des versants n'est intégralement occupé par du pergélisol. En particulier, il a été possible de prouver de manière directe que, dans un éboulis, le pergélisol est présent dans les parties inférieures du versant et absent dans les parties supérieures. Trois facteurs de contrôle principaux de la répartition du pergélisol déterminée au sein des éboulis étudiés ont été individualisés, pouvant agir seuls ou de manière combinée : la ventilation ascendante, l'augmentation de la granulométrie en direction de l'aval et la redistribution de la neige par le vent et les avalanches. Parmi ceux-ci, la relation ventilation-granulométrie semble être le facteur de contrôle principal permettant d'expliquer la présence de pergélisol dans les parties inférieures d'un éboulis et son absence dans les parties supérieures. Enfin, l'analyse de la structure des éboulis périglaciaires de haute altitude a permis de montrer que la stratigraphie du pergélisol peut être un élément important pour l'interprétation de la signification paléoclimatique de ce type de formes. Pour le deuxième volet de la recherche, grâce aux datations relatives effectuées à l'aide de l'utilisation conjointe de la méthode paléogéographique et du marteau de Schmidt, il a été possible de définir la chrono-stratigraphie du retrait glaciaire et du développement des glaciers rocheux et des versants d'éboulis des quatre régions des Alpes suisses étudiées (régions du Mont Gelé - Mont Fort, des Fontanesses et de Chamosentse, dans les Alpes Valaisannes, et Massif de la Cima di Gana Bianca, dans les Alpes Tessinoises). La compilation de toutes les datations effectuées a permis de montrer que la plupart des glaciers rocheux actifs étudiés se seraient développés soit juste avant et/ou pendant l'Optimum Climatique Holocène de 9.5-6.3 ka cal BP, soit au plus tard juste après cet évènement climatique majeur du dernier interglaciaire. Parmi les glaciers rocheux fossiles datés, la plupart aurait commencé à se former dans la deuxième moitié du Tardiglaciaire et se serait inactivé dans la première partie de l'Optimum Climatique Holocène. Pour les éboulis étudiés, les datations effectuées ont permis d'observer que leur surface date de la période entre le Boréal et l'Atlantique récent, indiquant que les taux d'éboulisation après la fin de l'Optimum Climatique Holocène ont dû être faibles, et que l'intervalle entre l'âge maximal et l'âge minimal est dans la plupart des cas relativement court (4-6 millénaires), indiquant que les taux d'éboulisation durant la période de formation des éboulis ont dû être importants. Grâce au calcul des taux d'érosion des parois rocheuses sur la base du volume de matériaux rocheux pour quatre des éboulis étudiés, il a été possible mettre en évidence l'existence d'une « éboulisation parapériglaciaire » liée à la dégradation du pergélisol dans les parois rocheuses, fonctionnant principalement durant les périodes de réchauffement climatique rapide comme cela a été le cas au début du Bølling, du Préboréal à la fin de l'Atlantique récent et, peut-être, à partir des années 1980. - In the context of a warmer climate, a « geosystemical » study of the permafrost distribution in a whole alpine periglacial hillslope, from the rockwall to the rockglacier, is of great importance. With respect to this problem, the general objective of this PhD thesis is the global study of talus slopes located within the alpine periglacial belt following two different research axes: the analysis of the internal structure and of the permafrost distribution of high altitude talus slopes and of the related processes; the reconstruction of the palaeoenvironmental history of the alpine periglacial belt during the Lateglacial and the Holocene. The stratigraphy and the permafrost distribution were studied in five talus slopes of the Valais Alps (Switzerland) with the analysis of borehole data (on three of the five talus slopes) and other methods of permafrost prospecting: Electrical Resistivity Tomography (ERT), Refraction Seismic Tomography (RST) and nuclear well logging. The collected data shows that, in all of the studied talus slopes, permafrost distribution is discontinuous and that neither of the hillslopes is integrally characterised by permafrost. In particular, this data proves by direct investigations that, in talus slopes, permafrost is present in the lower parts of the hillslope, whereas it is absent in the upper parts. Permafrost distribution in alpine talus slopes is depending of the combination of almost three controlling factors, whose respective importance is variable: the chimney effect, the increase of grain size downslope and the redistribution of snow by avalanches. Depending on the size of the talus and on topographical and geomorphological heterogeneities, various cases are possible: one dominant controlling factor or the combination of various factors. Nevertheless, it would be an error to consider each controlling factor independently, without considering their relationships. Between these controlling factors, the relationship chimney effect/grain size seems to be the most important factor controlling the presence of permafrost in the lowest part of periglacial talus slopes, and its absence in the upper parts. Finally, the analysis of the talus structure shows that the permafrost stratigraphy may be an important element of interpretation of the palaeoclimatic significance of an alpine talus slope. The second research axe focused on the establishment of a chronology of the Lateglacial glacier retreat and the dating of rockglaciers and talus slopes development in four studied regions of the Swiss Alps (Mont Gelé - Mont Fort, Fontanesses and Chamosentse regions, in the Valais Alps, and the Cima di Gana Bianca Massif, in the Ticino Alps). The compilation of the dates acquired through the combination of the palaeogeographical method and of the Schmidt hammer indicates that most of the investigated active rockglaciers started to evolve during the early phases of the Holocene or, at the latest, after the early-to-mid Holocene Climatic Optimum (ending around 6.3 ka cal BP). For the dated relict rockglaciers, most of them started to evolve in the second half of the Lateglacial, and probably became inactive at the beginning of the Holocene Climatic Optimum. For the investigated talus slopes, the relative dating carried out allowed to show that their surface date from the period included between the Boreal and the end of the Atlantic, pointing out that the rockwall retreat after the end of the Holocene Climatic Optimum was weak, and that the interval between maximal and minimal ages is in most cases relatively short (4-6 millennia). Therefore, the rockwall retreat during the development period of the talus slopes must has been considerable. Thanks to the calculation of rockwall erosion rates based on the volume of talus accumulations for four of the investigated hillslopes, it was possible to find evidences of the existence of "paraperiglacial rockfall phases" related to the permafrost degradation in rockwalls. These phases coincide with rapid climate warming periods, as at the beginning of the Bølling, during the Preboreal or, maybe, since 1980.

Inverse metamorphic zonation in very low-grade Tibetan zone series of SE Zanskar and its tectonic consequences (NW India, Himalaya)

The metamorphism of the carbonate rocks of the SE Zanskar Tibetan zone has been studied by `'illite crystallinity'' and calcite-dolomite thermometry. The epizonal Zangla unit overlies the anchizonal Chumik unit. This discontinuous inverse zonation demonstrates a late to post-metamorphic thrust of the first unit over the second. The studied area underwent a complex tectonic history: - The tectonic units were stacked from the NE to the SW, generating recumbent folds, NE dipping thrusts and the regional metamorphism. The compressive movements were active under lower temperature conditions, resulting in late thrusts that disturbed the metamorphic zonation. The discontinuous inverse metamorphic zonation dates from this phase. - A NE vergent backfolding phase occurred at lower temperature conditions. It caused the uplift of more metamorphic levels. - A late extensional phase is revealed by the presence of NE dipping low angle normal faults, and a major high angle fault, the Sarchu fault. The low angle normal faults locally run along earlier thrusts (composite tectonic contacts). Their throw has been sufficient to reset a normal stratigraphic superposition (young layers overlying old ones), but insufficient to erase the inverse metamorphic relationship. However, the combined action of backfolding and normal faulting can locally lessen, or even cancel, the inverse metamorphic superposition. After deduction of the normal fault translation, the vertical component of the original thrust displacement through stratigraphy is 400 m, which is a value far too low to explain the temperature difference between the two units. The horizontal component of displacement is therefore far more important than the vertical one. The regional distribution of metamorphism within the Zangla unit points out to an anchizonal front and an epizonal inner part. This fact is in agreement with nappe tectonics.

The Upper Oligocene of Montgat (Catalan Coastal Ranges, Spain): new age constraints to the western Mediterranean Basin opening

The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.

Radiometric age constraints on mineral growth, metamorphism, and tectonism of the Gummfluh klippe, Brianconnais domain of the Prealpes, Switzerland

A combined Ar-40/Ar-39, K/Ar, Rb/Sr and stable isotope study has been made of white micas from the Gummfluh klippe (Brianconnais domain of the Prealpes), Switzerland. The klippe consists mainly of Mesozoic to early Tertiary carbonate rocks metamorphosed from anchizonal to epizonal conditions. At the base of the klippe is a 10-50 m thick, ductilely deformed marble mylonite containing deformed authigenic quartz segregations. Stable isotope measurements of the coexisting calcite (deltaO-18SMOW=24.5) and quartz (deltaO-18SMOW=28.4) from the mylonite indicate relatively low temperatures (< 300-degreesC) during mylonitization. Analyses of white mica separates of varying size fractions from the mylonitic rocks by K/Ar and Rb/Sr techniques yield ages between 57 and 103 Ma. This variation is correlated with two parameters, the size of the mineral fraction, and the proportion of 2M1 (more phengitic) to 1M (more muscovitic) polytype in the sample. The K/Ar and Rb/Sr ages are generally younger in the smaller size fractions, which also containless 2M1 phengite. High precision Ar-40/Ar-39 age spectra from different size fractions of these micas record three distinct components, a small Hercynian component (ca. 200-300 Ma), a significant Eoalpine component (64-80 Ma) forming Ar-40/Ar-39 age plateaus, and a very minor Tertiary component (ca. 20-40 Ma). Characterization of the samples by SEM indicates the presence of two white mica populations, a coarser grained, deformed, detrital mica that probably corresponds to the 2M1 phengite and a finer grained neoformed 1M mica. Collectively these observations suggest that the Gummfluh samples contain a mixture of detrital phengites of Hercynian age together with neocrystallized muscovites grown during the late Eoalpine metamorphic event followed by minor argon loss during the Tertiary. The main geologic episode recorded in the Ar-40/Ar-39 age spectra of white micas in the mylonite is of Late Cretaceous/Early Tertiary age (64-80 Ma), representing the first reliable Eoalpine ages ever to be reported from the Prealpes. Contrary to tectonic models, the marble mylonite at the base of the Gummfluh klippe appears to be a Cretaceous thrust plane and not the thrust surface formed during transport of the klippe into its present position from the Penninic Alps during the Tertiary. The late Cretaceous thrust developed during marine sedimentation at a depth of 800 m below the seafloor at temperatures of approximately 280-degrees-C, facilitated by warm fluids along the tectonic discontinuity.

Climate and vegetation history of western Portugal inferred from Albian near-shore deposits (Gale Formation, Lusitanian Basin)

The late Early Cretaceous greenhouse climate has been studied intensively based on proxy data derived essentially from open marine archives. In contrast, information on continental climatic conditions and on the accompanying response of vegetation is relatively scarce, most notably owing to the stratigraphic uncertainties associated with many Lower Cretaceous terrestrial deposits. Here, we present a palynological record from Albian near-shore deposits of the Lusitanian Basin of W Portugal, which have been independently dated using Sr-isotope signals derived from low-Mg oyster shell calcite. Sr-87/Sr-86 values fluctuate between 0.707373 +/- 0.00002 and 0.707456 +/- 0.00003; absolute values and the overall stratigraphic trend match well with the global open marine seawater signature during Albian times. Based on the new Sr-isotope data, existing biostratigraphic assignments of the succession are corroborated and partly revised. Spore-pollen data provide information on the vegetation community structure and are flanked by sedimentological and clay mineralogical data used to infer the overall climatic conditions prevailing on the adjacent continent. Variations in the distribution of climate-sensitive pollen and spores indicate distinct changes in moisture availability across the studied succession with a pronounced increase in hygrophilous spores in late Early Albian times. Comparison with time-equivalent palynofloras from the Algarve Basin of southern Portugal shows pronounced differences in the xerophyte/hygrophyte ratio, interpreted to reflect the effect of a broad arid climate belt covering southern and southeastern Iberia during Early Albian times.

Evidence for middle Cretaceous accretion at Santa Elena Peninsula (Santa Rosa Accretionary Complex), Costa Rica

An oceanic assemblage of alkaline basalts, radiolarites and polymictic breccias forms the tectonic substratum of the Santa Elena Nappe, which is constituted by extensive outcrops of ultramafic and mafic rocks of the Santa Elena Peninsula (NW Costa Rica). The undulating basal contact of this nappe defines several half-windows along the south shores of the Santa Elena Peninsula. Lithologically it is constituted by vesicular pillowed and massive alkaline basaltic flows, alkaline sills, ribbon-bedded and knobby radiolarites, muddy tuffaceous and detrital turbidites, debris flows and polymictic breccias and megabreccias. Sediments and basalt flows show predominant subvertical dips and occur in packages separated by roughly bed-parallel thrust planes. Individual packages reveal a coherent internal stratigraphy that records younging to the east in all packages and shows rapid coarsening upwards of the detrital facies. Alkaline basalt flows, pillow breccias and sills within radiolarite successions are genetically related to a mid-Cretaceous submarine seamount. Detrital sedimentary facies range form distal turbidites to proximal debris flows and culminate in megabreccias related to collapse and mass wasting in an accretionary prism. According to radiolarian dating, bedded radiolarites and soft-sediment- deformed clasts in the megabreccias formed in a short, late Aptian to Cenomanian time interval. Middle Jurassic to Lower Cretaceous radiolarian ages are found in clasts and blocks reworked from an older oceanic basement. We conclude that the oceanic assemblage beneath the Santa Elena Nappe does not represent a continuous stratigraphic succession. It is a pile of individual thrust sheets constituting an accretionary sequence, where intrusion and extrusion of alkaline basalts, sedimentation of radiolarites, turbidites and trench fill chaotic sediments occurred during the Aptian-Cenomanian. These thrust sheets formed shortly before the off-scraping and accretion of the complex. Here we define the Santa Rosa Accretionary Complex and propose a new hypothesis not considered in former interpretations. This hypothesis would be the basis for further research.

The Hercynian structure of the Catalonian Coastal Ranges (NE Spain)

In the Catalonian Coastal Ranges, Paleozoic sedimentary and meta-sedimentary rocks crop out in severa1 areas, intruded by late tectonic Hercynian granitoids and separated by Mesozoic and Tertiary cover sediments. Large structures are often difficult to recognize, although a general east-west trend can be observed on the geological map. Deformation was accompanied by the development of cleavages and regional metamorphism. Green-schist facies rocks are prominent throughout the Ranges, while amphibolite facies are restricted to small areas. In low-grade areas, the main deformation phase generated south-facing folds with an axial plane cleavage (slaty cleavage in metapelitic rocks). The intersection lineation (Ss/Sl) and the axes of minor folds trend cast-west, as do all mapable structures. Late deformations generated coarse crenulations, small chevrons and kink-bands, all intersecting the slaty cleavage at high angles. In medium- to high-grade areas no major folds have been observed. In these areas, the main foliation is a schistosity and is often folded, giving centimetric to decimetric, nearly isoclinal intrafolial folds. In schists, these folds aremuchmore common than inother lithologies, and can be associated with a crenulation cleavage. All these planar structures in high-grade rocks are roughly parallel. The late Hercynian deformational events, which gave rise to the crenulations and small chevrons, also produced large (often kilometric) open folds which fold the slaty cleavage and schistosity. As aconsequence, alternating belts with opposite dip (north and south) of the main foliation were formed. With respect to the Hercynian orogenic belt, the Paleozoic outcrops of the Catalonian Coastal Ranges are located within the northern branch of the Ibero-Armorican arc, and have a relatively frontal position within the belt. The Carboniferous of the Priorat-Prades area, together with other outcrops in the Castellón Province, the Montalbán massif (Iberian Chain) and the Cantabrian zone (specially the Pisuerga-Carrión Province) probably form part of a wide area of foreland Carboniferous deposition placed at the core of the arc.

The use of uniaxial accelerometry for the assessment of physical-activity-related energy expenditure: a validation study against whole-body indirect calorimetry.

Assessing the total energy expenditure (TEE) and the levels of physical activity in free-living conditions with non-invasive techniques remains a challenge. The purpose of the present study was to investigate the accuracy of a new uniaxial accelerometer for assessing TEE and physical-activity-related energy expenditure (PAEE) over a 24 h period in a respiratory chamber, and to establish activity levels based on the accelerometry ranges corresponding to the operationally defined metabolic equivalent (MET) categories. In study 1, measurement of the 24 h energy expenditure of seventy-nine Japanese subjects (40 (SD 12) years old) was performed in a large respiratory chamber. During the measurements, the subjects wore a uniaxial accelerometer (Lifecorder; Suzuken Co. Ltd, Nagoya, Japan) on their belt. Two moderate walking exercises of 30 min each were performed on a horizontal treadmill. In study 2, ten male subjects walked at six different speeds and ran at three different speeds on a treadmill for 4 min, with the same accelerometer. O2 consumption was measured during the last minute of each stage and was expressed in MET. The measured TEE was 8447 (SD 1337) kJ/d. The accelerometer significantly underestimated TEE and PAEE (91.9 (SD 5.4) and 92.7 (SD 17.8) % chamber value respectively); however, there was a significant correlation between the two values (r 0.928 and 0.564 respectively; P<0.001). There was a strong correlation between the activity levels and the measured MET while walking (r(2) 0.93; P<0.001). Although TEE and PAEE were systematically underestimated during the 24 h period, the accelerometer assessed energy expenditure well during both the exercise period and the non-structured activities. Individual calibration factors may help to improve the accuracy of TEE estimation, but the average calibration factor for the group is probably sufficient for epidemiological research. This method is also important for assessing the diurnal profile of physical activity.