933 resultados para Syntactic foams


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Foam was developed as a novel vehicle for streptokinase with the purpose of increasing the contact time and area between the fibrinolytic and the target thrombus, which would lead to a greater therapeutic efficacy at lower doses, decreasing the drug s potential to cause bleeding. Fibrinolytic foams were prepared using CO2 and human albumin (at different v:v ratios), as the gas and liquid phases, respectively, and streptokinase at a low total dose (100,000 IU) was used as fibrinolytic agent conveyed in 1 mL of foam and in isotonic saline solution. The foams were characterized as foam stability and apparent viscosity. The thrombolytic effect of the streptokinase foam was determined in vitro as thrombus lysis and the results were compared to those of a fibrinolytic solution (prepared using the same dose of streptokinase) and foam without the fibrinolytic. In vitro tests were conducted using fresh clots were weighed and placed in test tubes kept at 37 ° C. All the samples were injected intrathrombus using a multiperforated catheter. The results showed that both foam stability and apparent viscosity increased with the increase in the CO2:albumin solution ratio and therefore, the ratio of 3:1 was used for the incorporation of streptokinase. The results of thrombus lysis showed that the streptokinase foam presented the highest thrombolytic activity (44.78 ± 9.97%) when compared to those of the streptokinase solution (32.07 ± 3.41%) and the foam without the drug (19.2 ± 7.19%). We conclude that fibrinolytic foam showed statistically significant results regarding the enhancement of the lytic activity of streptokinase compared to the effect of the prepared saline solution, thus it can be a promising alternative in the treatment of thrombosis. However, in vivo studies are needed in order to corroborate the results obtained in vitro

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In order to guarantee database consistency, a database system should synchronize operations of concurrent transactions. The database component responsible for such synchronization is the scheduler. A scheduler synchronizes operations belonging to different transactions by means of concurrency control protocols. Concurrency control protocols may present different behaviors: in general, a scheduler behavior can be classified as aggressive or conservative. This paper presents the Intelligent Transaction Scheduler (ITS), which has the ability to synchronize the execution of concurrent transactions in an adaptive manner. This scheduler adapts its behavior (aggressive or conservative), according to the characteristics of the computing environment in which it is inserted, using an expert system based on fuzzy logic. The ITS can implement different correctness criteria, such as conventional (syntactic) serializability and semantic serializability. In order to evaluate the performance of the ITS in relation to others schedulers with exclusively aggressive or conservative behavior, it was applied in a dynamic environment, such as a Mobile Database Community (MDBC). An MDBC simulator was developed and many sets of tests were run. The experimentation results, presented herein, prove the efficiency of the ITS in synchronizing transactions in a dynamic environment

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work presents the specification and the implementation of a language of Transformations in definite Models specification MOF (Meta Object Facility) of OMG (Object Management Group). The specification uses a boarding based on rules ECA (Event-Condition-Action) and was made on the basis of a set of scenes of use previously defined. The Parser Responsible parser for guaranteeing that the syntactic structure of the language is correct was constructed with the tool JavaCC (Java Compiler Compiler) and the description of the syntax of the language was made with EBNF (Extended Backus-Naur Form). The implementation is divided in three parts: the creation of the interpretative program properly said in Java, the creation of an executor of the actions specified in the language and its integration with the type of considered repository (generated for tool DSTC dMOF). A final prototype was developed and tested in the scenes previously defined

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of impregnation of a sponge (usually polymer) with ceramic slurry, followed by a heat treatment, which will happen the decomposition of organic material and sintering the ceramic material, resulting in a ceramic structure which is a replica of impregnated sponge. Knowledge of the mechanical properties of these ceramics is important for these materials can be used commercially. Gibson and Ashby developed a mathematical model to describe the mechanical behavior of cellular solids. This model wasn´t for describing the ceramics behavior produced by the replica method, because it doesn´t consider the defects from this type of processing. In this study were researched mechanical behavior of porous alumina ceramics obtained by the replica method and proposed modifications to the model of Gibson and Ashby to accommodate this material. The polymer sponge used in processing was characterized by thermogravimetric analysis and scanning electron microscopy. The materials obtained after sintering were characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a correction of this model through a factor related to struts integrity degree, which consider fissures present in the structure of these materials besides defects geometry within the struts

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O trabalho teve como objetivo estudar o desempenho de pontas de pulverização na deposição da calda inseticida para o controle de ninfas de cigarrinhas das pastagens em Brachiaria brizantha cv. MG-4. Doze tratamentos foram estudados em esquema fatorial 6x2, constituídos pelo contraste de seis pontas de pulverização e pressões de 196 e 392 kPa: TF-VP2 (336 L ha-1 e 467 L ha-1); AI11002-VS (184 L ha-1 e 200 L ha-1); XR11002-VS (200 L ha-1 e 280 L ha-1); TT11002-VP (200 L ha-1 e 280 L ha-1); TJ60-11002VS (208 L ha-1 e 280 L ha-1) e TX-VK4 (72 L ha-1 e 97 L ha-1). Para monitorar a deposição das caldas de pulverização, utilizaram-se os traçadores Azul Brilhante FD&C-1 (0,3% p/v) e Amarelo de Tartrasina FD&C-5 (0,6% p/v). Alvos artificiais, constituídos de lâminas de vidro, foram posicionados na base das plantas, próximos à superfície do solo, e os depósitos por unidade de área das soluções pulverizadas foram quantificados por espectrofotometria. As pontas TF-VP2, XR11002-VS e AI11002-VS, nas pressões de 196 e 392 kPa, proporcionam as maiores deposições da calda de pulverização na região das espumas das cigarrinhas das pastagens, apesar de apresentarem menor uniformidade na distribuição dos depósitos em relação a TX-VK4, XR110.02-VS e TJ110.02-VS. O aumento da pressão de 196 para 392 kPa promoveu aumento na deposição da calda de pulverização sobre a Brachiaria brizantha e na região onde se encontram as espumas das cigarrinhas para todos os tipos de pontas estudadas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aimed to investigate the foam mat drying process of pineapple and mango pulp, as well as to evaluate the final product quality. Initially, the selection of fruit and additives was conducted based on density and stability determinations of mango, seriguela, umbu and pineapple foams. After selecting pineapple and mango for further studies, the fruit pulps and fruit foams were characterized in regard to their physicochemical composition. The temperature (60oC or 70oC) and the foam thickness (4 and 11 mm) were evaluated in accordance to the obtained drying curves and after model adjustment. Mango and pineapple powders obtained at the best process conditions were characterized in regard to their physicochemical composition, solubility, reconstitution time. Yoghurts were prepared with the addition of pineapple and mango powders and they were evaluated for their sensory acceptance. Results show that the best drying rates were achieved by using 70o C and layers 4mm thick for both fruits. The Page model successfully fitted the drying experimental data and it can be used as a predictive model. Pineapple and mango powders showed acid pH, high soluble solids content, low water activity (approx. 0.25), lipids between 1.46% and 2.03%, protein around 2.00%, and ascorbic acid content of 17,73 mg/100g and 14.32 mg/100g, for mango and pineapple, respectively. It was observed higher ascorbic acid retention for pineapple and mango powders processed at 70o C, which would be explained by the lower drying time applied. The fruit powders exhibited high solubility and fast reconstitution in water. The sensory acceptance indexes for yoghurts with the addition of both fruit powders were higher than 70%, which reflect the satisfactory product acceptance

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This body of work aims to describe and analyze the behavior of the Aí specificity marker of indefinite Noun Phrases (NP), one of the many functions this linguistic item is developing in contemporary Brazilian Portuguese. From the Functional Linguistic theory perspective, the North American declivity, this project intends to outline the possible grammaticalization trajectory taken by the Aí specificity marker. It will be followed from its function as a spatial deitic up to its integration of indefinite NP, and the action of the fundamental principles of the theory, such as iconicity and informativity, will be observed on the use of this item. Following this, Aí specificity marker behavior will be described in respect to various linguistic and social factors: type of text where the occurrence is encountered, language modality in which the latter is produced, syntactic function developed by the NP specified by Aí , the existence or lack of material intervening between Aí and the NP nuclear noun, informational status of the NP adjugated to Aí , and finally, sex, education and age of the speaker. The occurrence of conversational implicatures will also be verified (GRICE, 1982) within the contexts of Aí specificity marker use. Reflections on the teaching of grammar will be made, as well as on the possibility and validity of working with noun phrase specificity markers in elementary and high school Portuguese language classes. The data used in this research project stem from Corpus Discurso & Gramática A língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998), and from Corpus Discurso & Gramática A língua falada e escrita na cidade do Rio de Janeiro (VOTRE; OLIVEIRA, 1995)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This present work has as objective to analyze the interpretation of the syntactic and semantic meaning performed by third graders in the nominal groups (NGs) with attributive adjectives in the English language in a text of the final exam in the ESP (English for Specific Purposes) discipline. The corpus is made up of 30 exams of two classes from a third grade institution of the biomedical area, corresponding to the basic and advanced levels of the second term in 2006. The text has 24 NGs of different lexical content, a total of 27 NGs in the whole text summing up to 810 analyzed occurrences. The analysis is carried out at the morphologic, syntactic and semantic levels using as theoretical background the traditional and functional grammars (QUIRK et al, 1985; CELSE-MURCIA et al, 1998; TUCKER, 1998), in their semantic aspects, the Semantics (FRAWLEY, 1992) and the Cognitive Linguistics (TAYLOR, 2002). We concluded that the main difficulties were due to the lack of vocabulary and to the use of mother tongue strategies instead of using the top-down strategies for reading a text in English to compensate this gap. We also observed that even when the vocabulary was known, there were difficulties in establishing the semantic and syntactic relations between modifier and noun head. We suggested improvements for the teaching of reading English texts at the third grade grounded in the obtained results such as a more comprehensive study of the several different morphologic and syntactic structures of the NGs with premodifiers and their semantic consequences, an approach of the morphologic, syntactic and semantic aspects of the NGs and the use of both top-down and bottom-up strategies when reading a NG in the English language

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on North American Functional Linguistic Theory, our proposal is to describe and analyze the use of verb CHEGAR in verbal periphrasis such as [CHEGAR (E) + V2], where CHEGAR does not demonstrate a significance linked to physical movement. In linguistic literature, such periphrasis has been attributed several functions, related to aspectualization, emphasis of negative segments, and construction of mental spaces, among others. This study considers that the function of verb CHEGAR in the periphrasis in question is to indicate a global aspect, emphasizing a range of semantic-pragmatic nuances such as the sudden, instantaneous, or even abrupt character of the events refered to by the principal verb of the construction (V2), and/or the taking of initiative (sudden) by the agent (in the syntactic role of periphrastic subject), and/or subjective evaluations which go from surprise to frustration. Our objectives are the following: i) to describe and analyze the semanticpragmatic, morphosyntactic and social relationships which characterize the use of CHEGAR in verbal periphrases like [CHEGAR (E) + V2] and in coordinated/juxtaposed speech in which CHEGAR is the principal verb of the first utterance and is an elocution verb and the principal verb of the second; ii) identify, based on this description and analysis, synchrony proof in the grammaticalization of CHEGAR as an auxiliary verb in the periphrasis refered to. There was observed to be a strong similarity between coordinate/juxtaposed and periphrastic constructions. Such similarities strengthen the hypothesis that the use of CHEGAR as a lexical verb in coordinate/juxtaposed structures is the origin of the use of CHEGAR in the periphrastic structure, since the many properties encountered with higher frequency in lexical use are also just as frequently used as auxiliaries. Nevertheless, between the two constructions being studied, sufficient difference can be observed to see that CHEGAR, in the periphrasis [CHEGAR (E) V2], is behaving like an auxiliary verb, and shows typical properties of these types of verbs: i) in 100% of occurrences, it does not have a complement;ii) it has a co-referential subject in 100% of cases; iii) it does not appear with intervening material between it and V2. Besides this, CHEGAR, in periphrases, is predominant in nonneutral evaluation contexts, denoted by V2. Inspired by the results obtained, we propose strategies for the discussion of the [CHEGAR (E) V2] periphrases in both elementary and high schools.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper attempts to investigate the discourse manifestations of the grammatical relation direct object with respect to the syntactic, semantic and pragmatic properties that underlie this element. The research adopts theoretical orientation of the functionalism from North American and Brazilian schools inspired in Givón (1995, 2001), Hopper and Thompson (1980), Chafe (1979), Furtado da Cunha, Oliveira, Martelotta (2003) inter alia. From functionalism, the research uses principles of iconicity, markedness and informativity and it analize categories of transitivity, grounding and animacy. This research is anchored in prototype model (TAYLOR 1995); construction grammar model (GOLDBERG 1996, 2002). Both theoretical orientations share the view that language is a malleable living organism subject to socio-cultural context. Grammar is then the result of created, maintained, and systematized linguistic patterns developed from and used for language use. According to a functional linguistics and cognitivist linguistics verbs are stored in the speakers lexicon in syntactic-semantic frames which are more frequent. These frames carry information concerning obligatory and optional arguments and the semantic roles these arguments take in the clause. The analysis focuses on the semantic type of the verbs and its relationship with the argument encoded as a direct object observing the aspectual nature of verbs. Direct objects are classified according to their morphology (lexical or pronominal noun phrase), semantic role, informational content and animacy. This study discusses pedagogical implications with relation to how the grammatical concepts touched on this paper are treated in school textbooks. The empirical data come from Corpus Discurso & Gramática: a língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998). This corpus is composed of texts that contain spoken and written modalities. These modalities are in turn organized according to different types: personal narratives, retold narrative, description of preferred place, procedural place, procedural description and report on argumentation. The sample data totals 40 texts produced by four language consultants of the last graduation date. The paper shows that the same syntactic structures (formed through Subject-Verb-Object) correspond to different semantic-pragmatic structures in relation to specific communicative purposes even verb is an event, process or state. The argument structure are not aleatory but are related to experience; that is the way humans conceptualize the world and talk about it

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work aims at under the cognitive-functional perspective describing, inside the vast domain of the linguistic prefabs, the structure and the functioning of the Idiomatic Verb Phrases (SVIs), produced by speakers of the Portuguese from Brazil, located in Natal (RN). From the functionalist presupposition that the language is used essentially to assist to communicative demands, it is observed that its morphologic-syntactic structure is conditioned to the inherent pragmatic vicissitudes to the verbal interaction of subjects, socially heterogeneous and historically established. It is focalized, in the composition of SVIs, the relationships VT + OD (transitive verb + direct object), characterizing the syntactic-semantic nature of the verb and of the respective verbal complement. Those verb combinations + complement can be interpreted as lexical structures, reflexes of the idiomaticity inherent to conventional constructions already systematized in the users' of the language cultural repertoire. It is sought, still, to glimpse the cognitive and discursive motivations pertinent to that linguistic phenomenon. In the investigative process, are analyzed exclusive data of speech collected in Corpus Discurso & Gramática a lingua falada e escrita na cidade do Natal, organized by Furtado da Cunha (1998). The adopted methodological procedures configure as methods of empiric analysis and use of the intuition, being emphasized the qualitative approach (explanatory) of the data with quantitative support of statistical indicators. It shows, finally, a grating of didactic suggestions on SVIs, for Portuguese's classes, as subsidies to the educational practice in the Medium Teaching and in the course of Letters.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work analyzes deverbal nominalizations with the sufix dor in Brazilian Portuguese, under the perspective of Cognitive Linguistics, more specifically, the Construction Grammar. The aim is to determine the general features of interpretation that characterize this deverbal construction and its use in formal writing. Based on the cognitive assumption that grammatical structure is motivated, explained, and determined by the structure of cognitive patterns, created from our experience in the world, and by the communicative function of language, the dor deverbal is treated as a polysemic grammatical construction. In the composition of V+dor, the relation rootsuffix is focused, through a characterization of the syntactic-semantic nature of the verb and the values of the suffix. Among the different values conventionally related to the XDOR construction, the agentive is considered as the prototypical sense. The relation between the other values and the prototype is explained by cognitive abilities and discourse motivations. The deverbal construction X-DOR is also interpreted as a valency noun that, like an action nominal, retains the argument structure of the deriving predicate. It is also intended to demonstrate the textual function of this deverbal construction, as a device of information condensing and anaphoric recovery. The data were taken from Veja magazine and the approach is qualitative (explicative), with quantitative support

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the light of the Functional Linguistic Theory, in its North-American version (HOPPER, 1987, 1991, 1998, 2008, 2010; GIVÓN, 2001; LEHMANN, 2002; HOPPER; TRAUGOTT, 2003; FURTADO DA CUNHA; OLIVEIRA; MARTELOTTA, 2003, among others), the general objective of this research is to demonstrate, based on morphosyntactic and semantic-pragmatic properties, that AQUI (HERE), AÍ, ALI and LÁ (THERE) are part of an emerging paradigm in Brazilian Portuguese recently constituted and still developing of forms indicating specificity in indefinite noun phrases (NP). The data that make up the corpus of this research were collected in the following large Brazilian oral corpora: the Corpus Discurso & Gramática: a língua falada e escrita na cidade de Natal (FURTADO DA CUNHA, 1998), the Banco Conversacional de Natal (FURTADO DA CUNHA, 2010), the Projeto Variação Linguística no Estado da Paraíba VALPB (HORA, 2005) and the Projeto Variação Linguística Urbana na Região Sul do Brasil VARSUL (VANDRESEN, 2002). Firstly, the behavior of the specificity markings AQUI, AÍ, ALI and LÁ is described with respect to many factors of morphosyntactic and semantic-pragmatic nature: type of construction in which the markers appeared; existence or not of intervening material between the specificity marker item and the NP s nuclear noun; type of noun to which AQUI, AÍ, ALI and LÁ are linked; syntactic function of the specified SN; informational status of the NP to which the specificity markers AQUI, AÍ, ALI and LÁ are attached; occurrence of conversational implicatures (GRICE, 1982) in the context of use of these specificity markers. Next, a possible grammaticalization trajectory is outlined, according to which AQUI, AÍ, ALI and LÁ would had gone from an early spatial deictic indication to the specificity indication. The results point to the existence of forms with varying degree of emergence in this new paradigm of nominal specification, with AÍ being, probably, the item most grammaticalized, followed by LÁ, then ALI and AQUI, which permanence in the paradigm do not yet appear to be consolidated