Structural definition of the low-temperature phase transition of tris(ethane-1,2-diamine)zinc(II) dinitrate

The 93 K X-ray crystal structure of tris(ethane-1,2-diamine)zinc(II) dinitrate is reported. As predicted by the spectroscopic studies of other workers, there is a reversible phase transition of the structure at low temperature. We have determined this temperature to be 143 K. The structure at this temperature and below resembles that of the room temperature structure, except the crystallographic D-3 symmetry of the complex cation (296 K) is lowered to C-2 ( below 144 K) by subtle changes in cation-anion hydrogen bonding. No change in the conformation of the cation or its bond lengths and angles was found.

A yield architecture framework to explain adaptation of pearl millet to environmental stress

Functional knowledge of the physiological basis of crop adaptation to stress is a prerequisite for exploiting specific adaptation to stress environments in breeding programs. This paper presents an analysis of yield components for pearl millet, to explain the specific adaptation of local landraces to stress environments in Rajasthan, India. Six genotypes, ranging from high-tillering traditional landraces to low-tillering open-pollinated modern cultivars, were grown in 20 experiments, covering a range of nonstress and drought stress patterns. In each experiment, yield components (particle number, grain number, 100 grain mass) were measured separately for main shoots, basal tillers, and nodal tillers. Under optimum conditions, landraces had a significantly lower grain yield than the cultivars, but no significant differences were observed at yield levels around 1 ton ha(-1). This genotype x environment interaction for grain yield was due to a difference in yield strategy, where landraces aimed at minimising the risk of a crop failure under stress conditions, and modem cultivars aimed at maximising yield potential under optimum conditions. A key aspect of the adaptation of landraces was the small size of the main shoot panicle, as it minimised (1) the loss of productive tillers during stem elongation; (2) the delay in anthesis if mid-season drought occurs; and (3) the reduction in panicle productivity of the basal tillers under stress. In addition, a low investment in structural panicle weight, relative to vegetative crop growth rate, promoted the production of nodal tillers, providing a mechanism to compensate for reduced basal tiller productivity if stress occurred around anthesis. A low maximum 100 grain mass also ensured individual grain mass was little affected by environmental conditions. The strategy of the high-tillering landraces carries a yield penalty under optimum conditions, but is expected to minimise the risk of a crop failure, particularly if mid-season drought stress occurs. The yield architecture of low-tillering varieties, by contrast, will be suited to end-of-season drought stress, provided anthesis is early. Application of the above adaptation mechanisms into a breeding program could enable the identification of plant types that match the prevalent stress patterns in the target environments. (C) 2003 E.J. van Oosterom. Published by Elsevier Science B.V. All rights reserved.

Basis set convergence in Hartree-Fock calculations of some diatomic molecules containing first and second-row atoms

Investiga-se a convergência de conjuntos de bases em direção ao limite numérico da energia Hartree-Fock (HF) total para as seqüências hierárquicas dos conjuntos de bases XZP e ccpVXZ. Para as duas hierarquias, melhoramentos significativos são obtidos com cada incremento em X. Para estimar o limite do conjunto de base completo, uma forma exponencial foi usada. Entre as várias aproximações consideradas aqui, uma extrapolação exponencial de três parâmetros aplicada aos resultados TZP, QZP e 5ZP deu os limites do conjunto de bases mais precisos. Em adição, energias HF dos orbitais moleculares ocupados mais altos de algumas moléculas diatômicas foram calculadas com o conjunto 5ZP e comparadas com as correspondentes obtidas com o conjunto cc-pV5Z e com um método numérico HF.

Adapted Gaussian basis sets for atoms from Li through Xe generated with the generator coordinate Hartree-Fock method

Utiliza-se o método coordenada geradora Hartree-Fock para gerar bases Gaussianas adaptadas para os átomos de Li (Z=3) até Xe (Z=54). Neste método, integram-se as equações de Griffin-Hill-Wheeler-Hartree-Fock através da técnica de discretização integral. Comparam-se as funções de ondas geradas neste trabalho com as funções de ondas Roothaan-Hartree-Fock de Clementi e Roetti (1974) e com outros conjuntos de bases relatados na literatura. Para os átomos estudados aqui, os erros em nossas energias totais relativos aos limites numéricos Hartree-Fock são sempre menores que 7,426 milihartree.

Capital Intelectual: sua divulgação no setor bancário em Portugal

The importance of intangible resources has increased dramatically in recent years comparing to tangible ones. The economy in which we live is the result of competitive pressures that have imposed the implementation of business at an international level as well as a requirement in the application of sophisticated technologies that allow us to follow this fast evolution. In this age of information and innovation organizations will only survive if they are inserted in a global network of strategic relations, generically called as the network economy by Lev (2003). The service sector has stood out against the more traditional sectors of the economy. The intensive use of knowledge and a strong customer orientation created a new reality in today’s organizations: a growing importance attached to innovation, to the quality of products and services offered, to the information and communication technologies adopted, and to the creativity and particular abilities of human resources. The concept of intangible assets is more common in an accounting language and intellectual capital is most often applied in the context of management, being associated with a more comprehensive, multidimensional approach, representing all the knowledge that the institution owns and that it applies in the form of expertise, the creativity and organizational competencies that lead to innovation and to the sustained attainment of future economic benefits. An analysis of the scope of intellectual capital is fundamental to take more appropriate management decisions so that a more appropriate accounting treatment could be given by the accounting standardization organizations. This study intends to analyse the practices of information disclosure of the intellectual capital in the banking sector in Portugal, complementing the analysis of the disclosure of intangible assets in the context of accounting standards with the disclosure of intellectual capital in the context of organizational management. In particular, our main aims are to identify the extent of disclosure of intellectual capital made by banks in Portugal and also to identify the factors that determine such a disclosure. The disclosure in the context of accounting standards will be studied by checking the disclosure of intangible assets through the items listed in the International Accounting Standard 38 developed by the International Accounting Standards Board. The context of management was analysed by means of creating a voluntary disclosure index based on assumptions of the model Intellectus, developed by the Centro de Investigación sobre la Sociedad del Conocimiento – Instituto de Administración de Empresas (CIC-IADE) of the Universidad Autónoma of Madrid, and of the model Intellectual Capital Statement (made in Europe) (InCaS), both promoted by the European Commission and that we have adapted to the banking sector. When analysing the disclosure of intangible assets based on the context of accounting standards and the voluntary disclosure of intellectual capital, this study has tried to raise awareness about the importance of issuing reports on the intellectual capital as an alternative tool to take management decisions in the existing organizations and reflects the transparency and legitimacy that these institutions seek through a more extensive and more detailed information disclosure of their intellectual capital. Based on a complimentarily of economic theories, together with social and political theories, we tried to check the extent, evolution and tendencies of the compulsory disclosure of intangible assets and of the voluntary disclosure of the intellectual capital analysed in the period 2001-2011. Banks characteristics were also analysed in order to deduce those factors that determine or promote a larger disclosure in this sector. Based on these objectives, we adopted a longitudinal approach to explore the extent and the development of the disclosure of intangible assets as well as the factors that have determined it. Furthermore, we sought to assess the impact of the adoption of IAS 38 in the financial statements of the organizations in this sector. The disclosure index created on the basis of the disclosure requirements stated in IAS 38 from IASB was applied to the consolidated financial statements of the seventeen banks that rendered their statements in Portugal from 2001 to 2009. Since the information disclosed in the context of accounting standards may not have an important role as a management tool once it was not able to reflect what really contributes to the competitiveness and organizational growth, the voluntary disclosure of the intellectual capital was analysed according to the information obtained from the 2010 annual individual reports of the banks operating in Portugal in that year and from their respective websites in 2011. We tried to analyse the extent of the voluntary disclosure of the intellectual capital and of each of its components, human capital, structural capital and relational capital. The comparative analysis of their annual reports and their web pages allowed us to assess the incidence of the disclosure and discover what channel the banking sector focuses on when disclosing their intellectual capital. Also in this analysis the study of the disclosure determinants has allowed us to conclude about the influence of particular characteristics in the voluntary disclosure of the intellectual capital. The results of the analysis to the extent of the disclosure of intangible assets in the consolidated financial statements of the banking groups in Portugal in the period 2001-2009 have shown an average information disclosure of 0.24. This information disclosure evolved from an average value of 0.1940 in 2001 to 0.2778 in 2009. The average value is 0.8286 if it is only considered the disclosure of the intangible assets that the banks possessed. The evolution of this index means an increase in the average disclosure from 0.7852 in 2001 to 0.8788 in 2009. From the first results that are related to the extent of the disclosure of intangible assets in the financial statements, we can verify that the banking groups present a low disclosure level of these resources. However, when considering the disclosure of only the intangible assets that each institution owns, the disclosure level appears to be in compliance with the disclosure requirements for this sector. An evolution in the disclosure of intangible assets for the period considered was confirmed, showing an increase in the information disclosure of intangible assets in 2005, the year in which the accounting rules for intangible assets changed. The analysis that focused on the disclosure in the context of management tried to understand the extent, the incidence and the determinants of the voluntary information disclosure of intellectual capital in the annual reports of 2010 and on their web pages in 2011, studying the 32 banks operating in Portugal in this period. The average voluntary disclosure of the intellectual capital in the 2010 annual reports is 0.4342 while that in web pages is 0.2907. A review of the components of the intellectual capital allowed us to assess the importance that the banks confer to each of these components. The data obtained show that the relational capital, and more specifically the business capital, is the most disclosed component by banks in Portugal both in the annual reports and in their institutional web pages, followed by the structural capital and, finally, by the human capital. The disclosure of the human capital and the structural capital is higher in the annual reports than that in the websites, while the relational capital is more disclosed in the websites than in the annual reports. The results have also shown that the banks make a complementary use of both sources when disclosing information about their structural capital and relational capital but they do not show any information about their human capital in their websites. We tried to prove the influence of factors that could determine the accounting disclosure and the voluntary disclosure of the intellectual capital in this sector. The change in the IASB accounting rules as from January 1st 2005 gave a greater disclosure of accounting information of intangible assets in the financial statements of banks. The bank size and corporate governance measures have statistically proved to have an influence on the extent of the accounting disclosure of intangible assets and on the voluntary disclosure of the intellectual capital. Economic and financial variables such as profitability, operating efficiency or solvency were not determinants of information disclosure. The instability that the banking sector has experienced in economic and financial indicators in recent years as a result of the global financial markets imbalance has worsen indicators such as profitability, efficiency and solvency and caused major discrepancies in the economic situation between banks in Portugal. This empirical analysis has contributed to confront the disclosure required by accounting rules performed in the financial statements of organizations with that performed in the main disclosure media which is available for entities and which is increasingly requested in the process of taking management decisions. It also allowed us to verify whether there is homogeneity between institutions in the fulfilment of the requirements for information disclosure of intangible assets. However, as for voluntary disclosure of intellectual capital, there are large disparities in the disclosure extent between organizations. Regardless of this sector specific characteristics, the voluntary disclosure of intellectual capital made by banks in Portugal follows the trends in other sectors and the practices adopted in other countries, namely regarding the amount of information disclosed, the incidence of the disclosure on the indicators of relational capital and the importance of variables such as size as determinants of disclosure of intellectual capital. For a further knowledge in this field, we created a specific index for the banking sector, considering appropriate indicators for an incisive, comprehensive analysis in order to consider the most relevant indicators of intellectual capital components. Besides, confronting the analysis of disclosure in the context of accounting standards with the study of voluntary disclosure brought a new analysis approach to the research on intellectual capital disclosure. With this study, we have also intended to raise greater awareness of the need for harmonization in the intellectual capital disclosure on the part of the regulatory banking authority by means of a demanding, consistent and transparent report of intellectual capital with simple, clear, objective indicators so that those interested in disclosing intellectual capital information in the organizations in this sector may obtain more harmonized and comparable information. A research on the disclosure quality of intellectual capital, together with the application of other analysis methodologies in this sector, might be a promising approach for future research. Applying the voluntary disclosure index to the same sector in other countries may also contribute to the knowledge of disclosure practices in different geographical environments. We highlight the relevance of further studies contributing to the harmonization and consistency in the presentation of an intellectual capital report so as to enable organizations to disclose the resources that contribute most to their competitiveness and growth.

The portuguese insurance industry: basis for strategic process decision

Nowadays, the Portuguese insurance industry operates in a market with a much more aggressive structure than a few decades ago. Markets and the economy have become globalised since the last decade of the 20th century. Market forces have gradually shifted – power is now mainly on the demand side. In order to meet the new requirements, the insurance industry must develop a strong strategic ability to respond to constant changes of the new international economic order.One of the basic aspects of this strategic development will focus on the ability to predict the future. We introduce the subject by briefly describing the sector, its organisational structure in the Portuguese market, and challenges arising from the development of the European Union. We then analyse the economic and financial structure of the sector. From this point of view, we aim at the possibility of designing models that could explain the demand for insurance, claims and technical reserves evolution. Such models, (even if based on the past), would resolve, at least partly, one of the greatest difficulties experienced by insurance companies when estimating the budget. Thus, we examine the existence of variables that explain the previous points, which are capable of forming a basis for designing models that are simple but efficient, and can be used for strategic planning.

Basis invariant conditions for supersymmetry in the two-Higgs-doublet model

The minimal supersymmetric standard model involves a rather restrictive Higgs potential with two Higgs fields. Recently, the full set of classes of symmetries allowed in the most general two-Higgs-doublet model was identified; these classes do not include the supersymmetric limit as a particular class. Thus, a physically meaningful definition of the supersymmetric limit must involve the interaction of the Higgs sector with other sectors of the theory. Here we show how one can construct basis invariant probes of supersymmetry involving both the Higgs sector and the gaugino-Higgsino-Higgs interactions.

Modification of MOR by desilication treatments: Structural, textural and acidic characterization

The effect of several desilication experimental parameters (base concentration, temperature and time) on the characteristics of MOR zeolite was studied. The samples were characterized by X-ray diffraction, Al-27 and Si-29 MAS-NMR, chemical analysis, and FTIR (framework vibration region). The textural characterization was made by N-2 adsorption and the acidity was evaluated by pyridine adsorption followed by FTIR and by the catalytic model reaction of n-heptane cracking. The alkaline treatments promoted the Si extraction from the zeolite framework, without considerable loss of crystallinity and, as it was envisaged, an important increase of the mesoporous structure was attained. A linear correlation between the number of framework Si per unit cell. N-Si and the asymmetric stretching wavenumber, nu(i), was observed. The acidity characterization shows that the desilicated samples exhibit practically the same acid properties than the parent HMOR zeolite. The optimum desilication conditions were those used to obtain sample M/0.2/85/2, i.e., sample treated with 0.2 M NaOH solution at 85 degrees C for 2 h.

Utilização dos eurocódigos na construção metálica

Os Eurocódigos estruturais são um conjunto de normas técnicas que têm como objectivo abranger o projecto e verificação de qualquer tipo de construção para os países membros da União Europeia. O objectivo deste trabalho é sistematizar todos os procedimentos que estão presentes nos Eurocódigos e que são aplicáveis, de uma forma geral, à construção metálica. Foi feito o desenvolvimento de uma solução estrutural para o caso concreto de uma estrutura metálica de uma ponte rolante com o objectivo de se fazer o levantamento dos normativos estabelecidos para o projecto de estruturas metálicas. Este trabalho foi desenvolvido considerando fundamentalmente três Eurocódigos. O Eurocódigo 0 que estabelece o princípio e bases para o projecto de estruturas, o Eurocódigo 1 que define as acções em estruturas e o Eurocódigo 3 que estabelece as regras gerais, de verificação ao fogo, de projecto de ligações e de verificação à fadiga. O trabalho desenvolvido consistiu em projectar a estrutura metálica da ponte rolante considerada e para tal foram feitos os seguintes passos. - Determinação das acções na estrutura e das situações de projecto; - Projecto da estrutura considerando a verificação de cedência ou deformação excessiva dos seus elementos; - Projecto da estrutura considerando a perda de equilíbrio estático da estrutura; - Projecto da estrutura considerando a verificação da sua resistência ao fogo; - Projecto das ligações aparafusadas; - Verificação da resistência à fadiga.

Influência da modelação de núcleos de betão armado no cálculo automático de estruturas de edifícios

O presente trabalho aborda a questão do comportamento e influência estrutural da modelação de um núcleo de secção aberta de parede fina no modelo tridimensional de elementos finitos de um edifício de betão armado, composto por 5 pisos sujeito à acção sísmica regulamentar. Para o efeito, foram considerados os Eurocódigos estruturais, nomeadamente o Eurocódigo 0, Eurocódigo 1 e Eurocódigo 8. A fim de avaliar a importância do tipo de modelação destes elementos estruturais, elemento fundamental para a caracterização da resposta dinâmica, foi desenvolvido um estudo paramétrico, fazendo-se a análise de quatro formas distintas de modelação do mesmo núcleo. Para os mesmos casos de carregamento, é feita uma análise comparativa entre os resultados obtidos a nível de períodos, percentagem de armadura nos pilares e no próprio núcleo bem como os deslocamentos para os modelos em estudo, com recurso a um programa de cálculo automático. O edifício considerado neste trabalho foi modelado com base no programa comercial de cálculo automático SAP 2000 versão 14.4. Posteriormente apresentam-se e discutem-se os resultados obtidos nos vários modelos em causa e para as várias situações propostas ao longo do trabalho.

Elements of a methodology to assess the alignment of core-values in collaborative networks

Collaborative networks are typically formed by heterogeneous and autonomous entities, and thus it is natural that each member has its own set of core-values. Since these values somehow drive the behaviour of the involved entities, the ability to quickly identify partners with compatible or common core-values represents an important element for the success of collaborative networks. However, tools to assess or measure the level of alignment of core-values are lacking. Since the concept of 'alignment' in this context is still ill-defined and shows a multifaceted nature, three perspectives are discussed. The first one uses a causal maps approach in order to capture, structure, and represent the influence relationships among core-values. This representation provides the basis to measure the alignment in terms of the structural similarity and influence among value systems. The second perspective considers the compatibility and incompatibility among core-values in order to define the alignment level. Under this perspective we propose a fuzzy inference system to estimate the alignment level, since this approach allows dealing with variables that are vaguely defined, and whose inter-relationships are difficult to define. Another advantage provided by this method is the possibility to incorporate expert human judgment in the definition of the alignment level. The last perspective uses a belief Bayesian network method, and was selected in order to assess the alignment level based on members' past behaviour. An example of application is presented where the details of each method are discussed.

Thick dyke emplacement and internal flow: A structural and magnetic fabric study of the deep-seated dolerite dyke of Foum Zguid (southern Morocco)

Knowledge on forced magma injection and magma flow in dykes is crucial for the understanding of how magmas migrate through the crust to the Earth's surface. Because many questions still persist, we used the long, thick, and deep-seated Foum Zguid dyke (Morocco) to investigate dyke emplacement and internal flow by means of magnetic methods, structural analysis, petrography, and scanning electron microscopy. We also investigated how the host rocks accommodated the intrusion. Regarding internal flow: 1. Important variations of the rock magnetic properties and magnetic fabric occur with distance from dyke wall; 2. anisotropy of anhysteretic remanent magnetization reveals that anisotropy of magnetic susceptibility (AMS) results mainly from the superposition of subfabrics with distinct coercivities and that the imbrication between magnetic foliation and dyke plane is more reliable to deduce flow than the orientation of the AMS maximum principal axis; and 3. a dominant upward flow near the margins can be inferred. The magnetic fabric closest to the dyke wall likely records magma flow best due to fast cooling, whereas in the core the magnetic properties have been affected by high-temperature exsolution and metasomatic effects due to slow cooling. Regarding dyke emplacement, this study shows that the thick forceful intrusion induced deformation by homogeneous flattening and/or folding of the host sedimentary strata. Dewatering related to heat, as recorded by thick quartz veins bordering the dyke in some localities, may have also helped accommodating dyke intrusion. The spatial arrangement of quartz veins and their geometrical relationship with the dyke indicate a preintrusive to synintrusive sinistral component of strike slip.

Projecto de fundações e estrutura de um edifício de 4 pisos em Lisboa, destinado a habitação

O objectivo deste trabalho consiste na elaboração de um projecto de estruturas de um edifício, desde a fase de concepção estrutural até à fase de pormenorização, passando obviamente pelo dimensionamento. O trabalho foi motivo para aplicação dos conhecimentos adquiridos durante o curso, na prática de projecto de estruturas, nomeadamente na utilização da regulamentação europeia de estruturas que está para entrar em vigor. O projecto foi elaborado a partir do projecto base de arquitectura e diz respeito a um conjunto de 4 edifícios de habitação separados por junta de dilatação, a construir em Lisboa. A estrutura em betão armado constituída por lajes fungiformes maciças apoiadas em pilares, paredes de betão e vigas, foi analisada com recurso a um programa de cálculo automático de elementos finitos SAP 200 V14.2.4. Para a execução deste trabalho recorreu-se à regulamentação europeia, nomeadamente o Eurocódigo 0, o Eurocódigo 1, o Eurocódigo 2 e o Eurocódigo 8, na sua versão final de Norma Portuguesa. Os critérios de dimensionamento bem como as disposições construtivas relativas a armaduras de betão são detalhadamente referidos ao longo do trabalho. Embora a análise estrutural tenha sido efectuada para quatro edifícios, os desenhos de pormenorização de betão armado são apresentados relativamente apenas ao edifício Nº1. Optou-se por esta solução em virtude de os edifícios serem semelhantes.

Intervenções em estruturas antigas

O presente relatório de estágio, definido como Trabalho Final de Mestrado, surge como resultado de um estágio profissional realizado no âmbito do Mestrado em Engenharia Civil do Instituto Superior de Engenharia de Lisboa, e tem como objectivos primordiais, expor as actividades realizadas e reflectir os conhecimentos adquiridos durante o período de estágio. Após uma formação académica maioritariamente vocacionada para os aspectos teóricos e de natureza científica, tornou-se fundamental ao estagiário garantir um contacto real com a profissão de Engenheiro Civil antes do ingresso no mercado de trabalho. Foi com base nesse pressuposto que a opção do Trabalho Final de Mestrado incidiu sobre a realização de um estágio curricular em detrimento das restantes possibilidades. O período de estágio iniciou-se a 14 de Março de 2011 e incidiu sobre a área de Conservação, Restauro e Reabilitação de edifícios com valor patrimonial, sendo feito referência no capítulo 2 aos princípios importantes da intervenção neste tipo de edifícios. O capítulo 3 faz uma abordagem geral do que são as coberturas servindo de complemento ao capítulo 4, onde são abordados e analisados os processos e métodos construtivos envolvidos, contemplando a evolução construtiva da cobertura do Cruzeiro, no Convento de Cristo em Tomar. Nos restantes capítulos, 5 e 6, é feita a caracterização e constituição da estrutura de um edifício da segunda metade do século XVIII, e a análise estrutural feita ao edifício no Antigo Convento do Santíssimo Sacramento, em Lisboa, respectivamente. O capítulo 4 é complementado pelo Anexo A, sendo utilizado como referência ao esquema da estrutura artesanal encontrada na cobertura do Cruzeiro.

CVD of CrO2 thin films: Influence of the deposition parameters on their structural and magnetic properties

This work reports on the synthesis of CrO2 thin films by atmospheric pressure CVD using chromium trioxide (CrO3) and oxygen. Highly oriented (100) CrO2 films containing highly oriented (0001) Cr2O3 were grown onto Al2O3(0001) substrates. Films display a sharp magnetic transition at 375 K and a saturation magnetization of 1.92 mu(B)/f.u., close to the bulk value of 2 mu(B)/f.u. for the CrO2.