Anterior Tooth Rehabilitation With Frozen Homogenous Bone Graft and Immediately Loaded Titanium Implant Using Computer-Guided Surgery

Computed tomographic scanning is a precise, noinvasive surveying technique that enables the professionals to improve the precision of implant placement by building a prototype that allows the confection of surgical guides. The authors present a clinical case of anterior tooth rehabilitation with frozen homogenous bone graft and immediately loaded titanium implant using computer-guided surgery. A multislice computed tomography was realized, and a prototype was built. All the procedures were previously realized in the prototype before started in the patient. This technique allows a better surgical planning, makes the procedures more accurate, and reduces surgery time.

Success rate of immediate nonfunctional loaded single-tooth implants: Immediate versus delayed implantation

Purpose: The aim of this study was to evaluate the success rate of maxillary immediate nonfunctional single-tooth loaded implants used into fresh extraction sites (immediate placement condition) or healed ridge (delayed placement condition).Materials and Methods: Eighty-two dental implants were placed in the maxilla of 64 consecutive patients from Private practice office and from a specialization course in Implantology. Forty-six implants were inserted under immediate placement condition, and 36 were inserted under delayed placement condition. The criteria used to evaluate success rate were those previously described by Albrektsson and Zarb (Int J Prosthodont 1993;6: 95-105), and follow-up period ranged from 18.0 to 39.7 months.Results: Seventy-nine implants fulfilled the success rate criteria (96.3%). Moreover, differences concerning implantation condition were not significant (P = 0.33, Qui-square test): three of the failed implants were from immediate placement group (success rate of 93.5%), and none was from delayed placement group (success rate of 100.0%).Conclusion: In the present sample, no statistically significant differences were detected for immediate nonfunctional single-tooth loaded implants under immediate placement condition in comparison with those inserted under delayed placement condition; both protocols had high success rate in maxillary incisors, canines, and premolars areas.

Biologic width changes around loaded implants inserted in different levels in relation to crestal bone: histometric evaluation in canine mandible

Objectives: The aim of the present study was to evaluate histometric changes around dental implants inserted at different levels in relation to the crestal bone, under different loading conditions.Material and methods: Thirty-six implants were inserted in the edentulous mandible of six mongrel dogs. Each implant was assigned to an experimental group according to the distance from the top of the implant to the crestal bone: Bone Level (at the crestal bone level), Minus 1 (1 mm below the crestal bone) or Minus 2 group (2 mm below the crestal bone). Each hemimandible was submitted to a loading protocol: conventional or immediate restoration. After 90 days, the animals were killed. Specimens were processed, and measurements were performed concerning the length of soft and hard peri-implant tissues. Data were analyzed using ANOVA and Student's t test (alpha=5%).Results: Among conventionally restored sites, the distance from the most coronal position of soft tissue margin (PSTM) and first bone-implant contact (fBIC) was greater for Minus 2 than for Bone Level and Minus 1 sites (P=0.03), but significant differences were not observed among immediately restored sites. Differences among groups were not observed concerning the PSTM, and the distance from the implant-abutment junction to fBIC. Greater amounts of lateral bone loss were observed for conventionally than for immediately restored sites (P=0.006).Conclusions: These findings suggest that the apical positioning of the top of the implant may not jeopardize the position of soft peri-implant tissues, and that immediate restoration can be beneficial to minimize lateral bone loss. Further studies are suggested to evaluate the clinical significance of these results in longer healing periods.

Long-Term Exogenous Melatonin Treatment Modulates Overall Feed Efficiency and Protects Ovarian Tissue Against Injuries Caused by Ethanol-Induced Oxidative Stress in Adult UChB Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Messenger ribonucleic acid abundance of intestinal enzymes and transporters in feed-restricted and refed chickens at different ages

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Knockdown resistance in pyrethroid-resistant horn fly (Diptera: Muscidae) populations in Brazil

Com o objetivo de verificar a ocorrência e determinar a frequência da mutação kdr (knock down resistance) em populações de Haematobia irritans (mosca-dos-chifres) resistentes aos piretróides, foram analisados 1.804 indivíduos de 37 populações de todas as Regiões do Brasil. Com exceção da Região Nordeste, o kdr (knock down resistance gene) foi encontrado em populações de todas as regiões. A mutação não foi detectada em 87,08% dos indivíduos. Entretanto, o gene foi amplificado de 12,92% das moscas, das quais 11,70% se mostraram heterozigotas resistentes e 1,22% homozigotas resistentes. em todas as populações verificou-se equilíbrio de acordo com a Lei de Hardy e Weinberg, exceto uma com excesso de heterozigotos. Entretanto, quando agrupamos diferentes populações numa metapopulação de acordo com a região geográfica, é possível observar um desvio nas populações Centro-Oeste, Sul e Sudeste, indicando isolamento populacional e que a ocorrência do kdr é provavelmente um efeito independente, talvez refletindo a estratégia de uso do inseticida de cada produtor. Apesar da resistência aos piretróides estar disseminada por todo o país, apenas 48% das populações resistentes apresentaram o kdr, e a frequência de indivíduos kdr nas populações resistentes se mostrou bastante baixa. À exceção da Região Nordeste, o mecanismo de resistência ligado ao kdr ocorre em todo o país.

GFAAS Determination of Zinc in Fish Feed and Feces Using Slurry Sampling

This paper presents a simple, fast, and sensitive method to determine zinc in samples of feces and fish feed by electrothermal atomic absorption spectrometry through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The procedure is based on the injection of 10 mu L of an acidified aqueous solution containing 0.50% w/v of feces or feed and 0.50% v/v HNO(3) into graphite tube. The limits of detection and quantification calculated for 20 readings of the blank of the standard slurries (0.50% w/v of feces or feed devoid of zinc) were 0.04 and 0.13 mu g L(-1) for the standard feces slurries and 0.05 and 0.17 mu g L(-1) for the standard feed slurries. The proposed method was applied in studies of digestibility of zinc in different fish feeds, and their results proved compatible with that obtained from samples mineralized by acid digestion using microwave oven.

Feed restriction and a diet's caloric value: The influence on the aerobic and anaerobic capacity of rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular characterization and relatedness of Haematobia irritans (horn fly) populations, by RAPD-PCR

Haematobia irritans is a hematophagous parasite of cattle that causes significant economic losses in many parts of the world, including Brazil. In the present work, one American and four Brazilian populations of this species were studied by Random Amplified Polymorpht DNA (RAPD) to assess basically genetic variability within and between populations. Ten different decamer random primers were employed in the genomic DNA amplification, yielding 117 fragments in the five H.. irritans populations. In Drosophila prosaltans, used as an outgroup, 81 fragments were produced. Forty-three of these fragments were shared by both species. Among the H. irritans samples, that from Rio Branco (Acre State, Brazil) produced the smallest numbers of fragments and polymorphic bands. This high genetic homogenity may be ascribed to its geographic origin (in the Northwest of Brazil), which causes high isolation and low gene flow, unlike the other Brazilian populations, from the South Central region, in which cattle trade is very intensive. Marker fragments (exclusive bands) detected in every sample enabled the population origin to be characterized, but they are also potentially useful for further approaches such as the putative origin of Brazilian populations from North America. Similarity indices [Nei & Li, 1979, Proc. Natl. Acad. Sci. USA 76: 5269-5273] and phylogenetic trees, rooted by using the outgroup and produced by the Phylogenetic Analysis using Parsimony (PAUP 4.0-Swofford, 2001) program showed the closest relationships between flies from Sao Jose do Rio Preto and Turiuba (both from São Paulo State, Brazil) while flies from the geographically distant Rio Branco showed the greatest differentiation relative to the others.

Modal analysis of anisotropic diffused-channel waveguide by a scalar finite element method

A procedure to model optical diffused-channel waveguides is presented in this work. The dielectric waveguides present anisotropic refractive indexes which are calculated from the proton concentration. The proton concentration inside the channel is calculated by the anisotropic 2D-linear diffusion equation and converted to the refractive indexes using mathematical relations obtained from experimental data, the arbitrary refractive index profile is modeled by a. nodal expansion in the base functions. The TE and TM-like propagation properties (effective index) and the electromagnetic fields for well-annealed proton-exchanged (APE) LiNbO3 waveguides are computed by the finite element method.

Commissioning and performance of the CMS silicon strip tracker with cosmic ray muons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Solid-phase peptide synthesis in highly loaded conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimisation of the glycerol-to-ornithine molar ratio in the feed medium for the continuous production of clavulanic acid by Streptomyces clavuligerus

Amino acids are well metabolized by Streptomyces clavuligerus during the production of clavulanic acid using glycerol as main carbon and energy source. However, only a few amino acids such as arginine and ornithine are favorable for CA biosynthesis. The aim of this work was to optimize the glycerol:ornithine molar ratio in the feed medium containing only these compounds to maximize CA production in continuous cultivation. A minimum number of experiments were performed by means of a simple two-level full-factorial central composite design to investigate the combined effect of glycerol and ornithine feeding on the CA concentration during the intermittent and continuous process in shake-flasks. Statistical analysis of the experimental data using the response surface methodology showed that a glycerol-to-ornithine molar ratio of approximately 40:1 in the feed medium resulted in the highest CA concentration when fermentation was stopped. Under these optimized conditions, in bench-scale fermentor runs, the CA concentration reached more than double the concentration obtained in shake-flasks runs. (C) 2009 Elsevier B.V. All rights reserved.

Feed efficiency of Nellore cattle selected for postweaning weight

Foram comparados dois rebanhos Nelore, um selecionado para maior peso pós-desmame e outro controle, selecionado para a média de peso pós-desmame, para avaliar os efeitos de 29 anos de seleção sobre a eficiência alimentar. Sessenta machos Nelore com 205 kg e 267 dias de idade (41 selecionados e 19 controle), foram avaliados em baias individuais durante a prova de ganho de peso. O desempenho e o consumo de matéria seca foram utilizados para determinar as seguintes medidas de eficiência: conversão alimentar; consumo alimentar residual; ganho residual; eficiência parcial de crescimento; taxa de crescimento relativo; e taxa de Kleiber. Após o período experimental de 112 dias, os animais controle apresentaram menor peso vivo final em comparação aos selecionados, contudo, não diferiram quanto ao consumo de matéria seca (% do peso vivo), à área de olho-de-lombo e às espessuras de gordura subcutânea na altura da 12ª costela e na região da picanha. O consumo de matéria seca (kg/dia) e o ganho médio diário dos animais selecionados foram, respectivamente, 19,4 e 26,4% superiores aos dos controle. O maior ganho médio diário dos animais selecionados promoveu melhora significativa, em torno de 6%, na conversão alimentar; 70 g/dia no ganho residual; e de 17% na taxa de Kleiber. As demais medidas de eficiência (consumo alimentar residual, eficiência parcial de crescimento e taxa de crescimento relativo) não diferiram entre os rebanhos. Os 29 anos de seleção para peso pós-desmame não afetaram a eficiência alimentar de bovinos Nelore.

Test post-weaning duration for performance, feed intake and feed efficiency in Nellore cattle

O objetivo neste estudo foi determinar o melhor período de avaliação para medidas de desempenho, consumo e eficiência alimentar. Durante 112 dias, 60 machos da raça Nelore, recém-desmamados, submetidos à prova de ganho de peso, foram alimentados em baias individuais para determinação do consumo alimentar e do desempenho. O peso corporal dos animais foi determinado a cada 28 dias, depois de jejum de 16 horas de líquidos e sólidos. As alterações na variância, variância relativa e correlações de Pearson e Spearman entre os dados dos períodos de avaliação reduzidos (28, 56 e 84 dias) e período total (112 dias) foram usados para determinar a melhor duração do período de avaliação. A duração do período de avaliação para ganho médio diário, consumo de matéria seca, conversão alimentar e consumo alimentar residual pode ser reduzida para 84, 28, 84 e 84 dias, respectivamente, pois tal redução não diminui significativamente a confiabilidade das avaliações em animais alimentados em baias individuais.