Optimum Evaluation of Reactive Power Requirements in Power Distribution-Systems

This paper presents three methodologies for determining optimum locations and magnitudes of reactive power compensation in power distribution systems. Method I and Method II are suitable for complex distribution systems with a combination of both radial and ring-main feeders and having different voltage levels. Method III is suitable for low-tension single voltage level radial feeders. Method I is based on an iterative scheme with successive powerflow analyses, with formulation and solution of the optimization problem using linear programming. Method II and Method III are essentially based on the steady state performance of distribution systems. These methods are simple to implement and yield satisfactory results comparable with the results of Method I. The proposed methods have been applied to a few distribution systems, and results obtained for two typical systems are presented for illustration purposes.

Statistical modelling and power analysis for detecting trends in total suspended sediment loads

The export of sediments from coastal catchments can have detrimental impacts on estuaries and near shore reef ecosystems such as the Great Barrier Reef. Catchment management approaches aimed at reducing sediment loads require monitoring to evaluate their effectiveness in reducing loads over time. However, load estimation is not a trivial task due to the complex behaviour of constituents in natural streams, the variability of water flows and often a limited amount of data. Regression is commonly used for load estimation and provides a fundamental tool for trend estimation by standardising the other time specific covariates such as flow. This study investigates whether load estimates and resultant power to detect trends can be enhanced by (i) modelling the error structure so that temporal correlation can be better quantified, (ii) making use of predictive variables, and (iii) by identifying an efficient and feasible sampling strategy that may be used to reduce sampling error. To achieve this, we propose a new regression model that includes an innovative compounding errors model structure and uses two additional predictive variables (average discounted flow and turbidity). By combining this modelling approach with a new, regularly optimised, sampling strategy, which adds uniformity to the event sampling strategy, the predictive power was increased to 90%. Using the enhanced regression model proposed here, it was possible to detect a trend of 20% over 20 years. This result is in stark contrast to previous conclusions presented in the literature. (C) 2014 Elsevier B.V. All rights reserved.

Statistical power calculation and sample size determination for environmental studies with data below detection limits

Power calculation and sample size determination are critical in designing environmental monitoring programs. The traditional approach based on comparing the mean values may become statistically inappropriate and even invalid when substantial proportions of the response values are below the detection limits or censored because strong distributional assumptions have to be made on the censored observations when implementing the traditional procedures. In this paper, we propose a quantile methodology that is robust to outliers and can also handle data with a substantial proportion of below-detection-limit observations without the need of imputing the censored values. As a demonstration, we applied the methods to a nutrient monitoring project, which is a part of the Perth Long-Term Ocean Outlet Monitoring Program. In this example, the sample size required by our quantile methodology is, in fact, smaller than that by the traditional t-test, illustrating the merit of our method.

Optimal scheduling of hydro-thermal power systems under shortage

The problem of optimal scheduling of the generation of a hydro-thermal power system that is faced with a shortage of energy is studied. The deterministic version of the problem is first analyzed, and the results are then extended to cases where the loads and the hydro inflows are random variables.

Nuclear power and Japan's collective future: Understanding beliefs about how nuclear policies will affect society

Despite ongoing controversies regarding possible directions for the nuclear plants program throughout Japan since the Fukushima disaster, little has been researched about people's belief structure about future society and what may affect their attitudes toward different policy options. Beyond policy debates, the present study focused on how people see a future society according to the assumptions of different policy options. A total of 125 students at Japanese universities were asked to compare a future society with society today in which one of alternative policies was adopted (i.e., shutdown or expansion of nuclear reactors) in terms of characteristics of individuals and society in general. While perceived dangerousness of nuclear power predicted attitudes and behavioural intentions to make personal sacrifices for nuclear power policies, beliefs about the social consequences of the policies, especially on economic development and dysfunction, appeared to play stronger roles in predicting those measures. The importance of sociological dimensions in understanding how people perceive the future of society regarding alternative nuclear power policies, and the subtle discrepancies between attitudes and behavioural intentions, are discussed.

The impact of global positioning systems and plotters on fishing power in the northern prawn fishery, Australia

The impact of global positioning systems (GPS) and plotter systems on the relative fishing power of the northern prawn fishery fleet on tiger prawns (Penaeus esculentus Haswell, 1879, and P. semisulcatus de Haan, 1850) was investigated from commercial catch data. A generalized linear model was used to account for differences in fishing power between boats and changes in prawn abundance. It was found that boats that used a GPS alone had 4% greater fishing power than boats without a CPS. The addition of a plotter raised the power by 7% over boats without the equipment. For each year between the first to third that a fisher has been working with plotters, there is an additional 2 or 3% increase. It appears that when all boats have a GPS and plotter for at least 3 years, the fishing power of the fleet will increase by 12%. Management controls have reduced the efficiency of each boat and lowered the number of days available to fish, but this may not have been sufficient to counteract the increases. Further limits will be needed to maintain the desired levels of mortality.

Single-Symbol ML Decodable Distributed STBCs for Partially-Coherent Cooperative Networks

A relay network with N relays and a single source-destination pair is called a partially-coherent relay channel (PCRC) if the destination has perfect channel state information (CSI) of all the channels and the relays have only the phase information of the source-to-relay channels. In this paper, first, a new set of necessary and sufficient conditions for a space-time block code (STBC) to be single-symbol decodable (SSD) for colocated multiple antenna communication is obtained. Then, this is extended to a set of necessary and sufficient conditions for a distributed STBC (DSTBC) to be SSD for. a PCRC. Using this, several SSD DSTBCs for PCRC are identified. It is proved that even if a SSD STBC for a co-located MIMO channel does not satisfy the additional conditions for the code to be SSD for a PCRC, single-symbol decoding of it in a PCRC gives full-diversity and only coding gain is lost. It is shown that when a DSTBC is SSD for a PCRC, then arbitrary coordinate interleaving of the in-phase and quadrature-phase components of the variables does not disturb its SSD property for PCRC. Finally, it is shown that the possibility of channel phase compensation operation at the relay nodes using partial CSI at the relays increases the possible rate of SSD DSTBCs from (2)/(N) when the relays do not have CSI to(1)/(2), which is independent of N.

A Current Source Inverter Fed Induction Motor Drive with Power Factor Angle Control Using Microprocessor

This paper describes a method of adjusting the stator power factor angle for the control of an induction motor fed from a current source inverter (CSI) based on the concept of space vectors (or park vectors). It is shown that under steady state, if the torque angle is kept constant over the entire operating range, it has the advantage of keeping the slip frequency constant. This can be utilized to dispose of the speed feedback and simplify the control scheme for the drive, such that the stator voltage integral zero crossings alone can be used as a feedback for deciding the triggering instants of the CSI thyristors under stable operation of the system. A closed-loop control strategy is developed for the drive based on this principle, using a microprocessor-based control system and is implemented on a laboratory prototype CSI fed induction motor drive.

Community, Power, and Colonialism: The U.S. Army in Southern Arizona and New Mexico, 1866-1886

Empire is central to U.S. history. When we see the U.S. projecting its influence on a global scale in today s world it is important to understand that U.S. empire has a long history. This dissertation offers a case study of colonialism and U.S. empire by discussing the social worlds, labor regimes, and culture of the U.S. Army during the conquest of southern Arizona and New Mexico (1866-1886). It highlights some of the defining principles, mentalities, and characteristics of U.S. imperialism and shows how U.S. forces have in years past constructed their power and represented themselves, their missions, and the places and peoples that faced U.S. imperialism/colonialism. Using insights from postcolonial studies and whiteness studies, this work balances its attention between discursive representations (army stories) and social experience (army actions), pays attention to silences in the process of historical production, and focuses on collective group mentalities and identities. In the end the army experience reveals an empire in denial constructed on the rule of difference and marked by frustration. White officers, their wives, and the white enlisted men not only wanted the monopoly of violence for the U.S. regime but also colonial (mental/cultural) authority and power, and constructed their identity, authority, and power in discourse and in the social contexts of the everyday through difference. Engaged in warfare against the Apaches, they did not recognize their actions as harmful or acknowledge the U.S. invasion as the bloody colonial conquest it was. White army personnel painted themselves and the army as liberators, represented colonial peoples as racial inferiors, approached colonial terrain in terms of struggle, and claimed that the region was a terrible periphery with little value before the arrival of white civilization. Officers and wives also wanted to place themselves at the top of colonial hierarchies as the refined and respectable class who led the regeneration of the colony by example: they tried to turn army villages into islands of civilization and made journeys, leisure, and domestic life to showcase their class sensibilities and level of sophistication. Often, however, their efforts failed, resulting in frustration and bitterness. Many blamed the colony and its peoples for their failures. The army itself was divided by race and class. All soldiers were treated as laborers unfit for self-government. White enlisted men, frustrated by their failures in colonial warfare and by constant manual labor, constructed worlds of resistance, whereas indigenous soldiers sought to negotiate the effects of colonialism by working in the army. As colonized labor their position was defined by tension between integration and exclusion and between freedom and colonial control.

On an unexpected career path? Using Wittgenstein’s Family Resemblance concept to determine the power of projects to transform project management careers

The power of projects has been demonstrated by the growth in their use across an increasing range of industries and workplaces in recent years. Not only has the number of people involved in project management increased, but the qualifications and backgrounds of those people have also broadened, with engineering no longer being the only path to project management (PM). Predicting the career trajectories in Project Management has become more important for both organisations employing project managers and project managers building career portfolios. Our research involved interviewing more than 75 project officers and project managers across a range of industries to explore their career journey. We used Wittgenstein’s family resemblance theory is to analyse the information from the transcripts to identify the extent to which the roles of participants fit with the commonly accepted definition of project management. Findings demonstrate diversity of project manager backgrounds and experiences and relational competencies across these backgrounds that form and shape PM careers.

A collaborative design to adaptively manage for landscape sustainability in north Australia: lessons from a decade of cooperative research

Approaches to manage for the sustainable use of natural and cultural resources in a landscape can have many different designs. One design is adaptive collaborative landscape management (ACLM) where research providers and users work closely together on projects to develop resources while adaptively managing to sustain or maintain landscapes in the long term. We propose that collaborative projects are more useful for achieving outcomes than integrative projects where participants merely join their separate contributions. To foster collaborative research projects to adaptively manage landscapes in northern Australia, a Tropical Savannas Cooperative Research Centre (TSCRC) was established in 1995. The TSCRC is a joint venture of major organizations involved in research and land management. This paper is our perspective on the four most important 'lessons learned' after using a ACLM-type approach for over 10 y. We learnt that collaboration (working in combination) not necessarily integration (combining parts into a whole) achieved sustainable outcomes. We found that integration across culturally diverse perspectives seldom achieved sustainable solutions because it devalued the position of the less empowered participants. In addition, positive outcomes were achieved when participants developed trust and respect for each other by embracing and respecting their differences and by sharing unifying concepts such as savanna health. Another lesson learned was that a collaborative organization must act as an honest broker by resisting advocacy of one view point over another. Finally, we recognized the importance of strongly investing in communication and networking so that people could adaptively learn from one another's experiences, understand each other's challenges and respect each other's choices. Our experience confirms the usefulness of the ACLM approach and highlights its role in the process of sustaining healthy landscapes.

An adaptive power-system stabiliser which cancels the negative damping torque of a synchronous generator

The paper presents a new criterion for designing a power-system stabiliser, which is that it should cancel the negative damping torque inherent in a synchronous generator and automatic voltage regulator. The method arises from analysis based on the properties of tensor invariance, but it is easily implemented, and leads to the design of an adaptive controller. Extensive computations and simulation have been performed, and laboratory tests have been conducted on a computer-controlled micromachine system. Results are presented illustrating the effectiveness of the adaptive stabiliser.

Evaluation of Charges for Power Transmission and Losses in Bilateral Power Contracts

The paper presents a method for transmission loss charge allocation in deregulated power systems based on Relative Electrical Distance (RED) concept. Based on RED between the generator and load nodes and the predefined bilateral power contracts, charge evaluation is carried out. Generally through some power exchange mechanism a set of bilateral contracts are determined that facilitate bilateral agreements between the generation and distribution entities. In this paper the possible charges incurred in meeting loads like generation charge, transmission charge and charge due to losses are evaluated. Case studies have been carried out on a few practical equivalent systems. Due to space limitation results for a sample 5 bus system are presented considering ideal load/generation power contracts and deviated load/generation power contracts. Extensive numerical testing indicates that the proposed allocation scheme produces loss allocations that are appropriate and that behave in a physically reasonable manner.