958 resultados para Soluções alternantes
Resumo:
The main purpose of this thesis is to investigate the potential of ionic liquids (ILs) as a new class of extractive solvents for added-value products from biomass. These include phenolic compounds (vanillin, gallic, syringic and vanillic acids), alkaloids (caffeine) and aminoacids (L-tryptophan). The interest on these natural compounds relies on the wide variety of relevant properties shown by those families and further application in the food, cosmetic and pharmaceutical industries. Aiming at developping more benign and effective extraction/purification techniques than those used, a comprehensive study was conducted using aqueous biphasic systems (ABS) composed of ILs and inorganic/organic salts. In addition, ILs were characterized by a polarity scale, using solvatochromic probes, aiming at providing prior indications on the ILs affinity for particular added-value products. Solid-liquid (S-L) extractions from biomass and using aqueous solution of ILs were also investigated. In particular, and applying and experimental factorial design to optimize the operational conditions, caffeine was extracted from guaraná seeds and spent coffee. With both types of extractions it was found that it is possible to recover the high-value compounds and to recycle the IL and salt solutions. Finally, aiming at exploring the recovery of added-value compounds from biomass using a simpler and more suistainable technique, the solubility of gallic acid, vanillin and caffeine was studied in aqueous solutions of several ILs and common salts. With the gathered results it was possible to demonstrate that ILs act as hydrotropes and that water can be used as an adequate antisolvent. This thesis describes the use of ILs towards the development of more effective and sustainable processes.
Resumo:
Nowadays, communication environments are already characterized by a myriad of competing and complementary technologies that aim to provide an ubiquitous connectivity service. Next Generation Networks need to hide this heterogeneity by providing a new abstraction level, while simultaneously be aware of the underlying technologies to deliver richer service experiences to the end-user. Moreover, the increasing interest for group-based multimedia services followed by their ever growing resource demands and network dynamics, has been boosting the research towards more scalable and exible network control approaches. The work developed in this Thesis enables such abstraction and exploits the prevailing heterogeneity in favor of a context-aware network management and adaptation. In this scope, we introduce a novel hierarchical control framework with self-management capabilities that enables the concept of Abstract Multiparty Trees (AMTs) to ease the control of multiparty content distribution throughout heterogeneous networks. A thorough evaluation of the proposed multiparty transport control framework was performed in the scope of this Thesis, assessing its bene ts in terms of network selection, delivery tree recon guration and resource savings. Moreover, we developed an analytical study to highlight the scalability of the AMT concept as well as its exibility in large scale networks and group sizes. To prove the feasibility and easy deployment characteristic of the proposed control framework, we implemented a proof-of-concept demonstrator that comprehends the main control procedures conceptually introduced. Its outcomes highlight a good performance of the multiparty content distribution tree control, including its local and global recon guration. In order to endow the AMT concept with the ability to guarantee the best service experience by the end-user, we integrate in the control framework two additional QoE enhancement approaches. The rst employs the concept of Network Coding to improve the robustness of the multiparty content delivery, aiming at mitigating the impact of possible packet losses in the end-user service perception. The second approach relies on a machine learning scheme to autonomously determine at each node the expected QoE towards a certain destination. This knowledge is then used by di erent QoE-aware network management schemes that, jointly, maximize the overall users' QoE. The performance and scalability of the control procedures developed, aided by the context and QoE-aware mechanisms, show the advantages of the AMT concept and the proposed hierarchical control strategy for the multiparty content distribution with enhanced service experience. Moreover we also prove the feasibility of the solution in a practical environment, and provide future research directions that bene t the evolved control framework and make it commercially feasible.
Resumo:
The production of color/flavor compounds in wine is the result of different interrelated mechanism reactions. Among these, the oxidation phenomenon and the Maillard reaction stands out with particular relevance due to their large impact on the sensory quality of wines and consequently on the product shelflife. The aim of this thesis is to achieve a global vision of wine degradation mechanisms. The identification of mediators’ reactions involved in oxidative browning and aromatic degradation will be attempted based on different detectors. Two approaches are implemented in this work: a “non-target” approach by which relevant analytical tools will be used to merge the information of cyclic voltammetry and Diode-Array (DAD) detectors, allowing a broader overview of the system and the note of interesting compounds, and a “target” approach by which the identification and quantification of the different compounds related to the wine degradation process will be performed using different detectors (HPLC-UV/Vis, LC-MS, GC-MS, and FID). Two different patterns of degradation will be used in this study: wines generated by O2 and temperature perturbations, and synthetic solutions with relevant wine constituents for mechanisms validation. Results clearly demonstrate a “convolution” of chemical mechanisms. The presence of oxygen combined with temperature had a synergistic effect on the formation of several key odorant compounds.The results of this work could be translated to the wine-making and wine-storage environment from the modelling of the analysed compounds.
Resumo:
The massive adoption of sophisticated mobile devices and applications led to the increase of mobile data in the last decade, which it is expected to continue. This increase of mobile data negatively impacts the network planning and dimension, since core networks are heavy centralized. Mobile operators are investigating atten network architectures that distribute the responsibility of providing connectivity and mobility, in order to improve the network scalability and performance. Moreover, service providers are moving the content servers closer to the user, in order to ensure high availability and performance of content delivery. Besides the e orts to overcome the explosion of mobile data, current mobility management models are heavy centralized to ensure reachability and session continuity to the users connected to the network. Nowadays, deployed architectures have a small number of centralized mobility anchors managing the mobile data and the mobility context of millions of users, which introduces issues related to performance and scalability that require costly network mechanisms. The mobility management needs to be rethought out-of-the box to cope with atten network architectures and distributed content servers closer to the user, which is the purpose of the work developed in this Thesis. The Thesis starts with a characterization of mobility management into well-de ned functional blocks, their interaction and potential grouping. The decentralized mobility management is studied through analytical models and simulations, in which di erent mobility approaches distinctly distribute the mobility management functionalities through the network. The outcome of this study showed that decentralized mobility management brings advantages. Hence, it was proposed a novel distributed and dynamic mobility management approach, which is exhaustively evaluated through analytical models, simulations and testbed experiments. The proposed approach is also integrated with seamless horizontal handover mechanisms, as well as evaluated in vehicular environments. The mobility mechanisms are also speci ed for multihomed scenarios, in order to provide data o oading with IP mobility from cellular to other access networks. In the pursuing of the optimized mobile routing path, a novel network-based strategy for localized mobility is addressed, in which a replication binding system is deployed in the mobility anchors distributed through the access routers and gateways. Finally, we go further in the mobility anchoring subject, presenting a context-aware adaptive IP mobility anchoring model that dynamically assigns the mobility anchors that provide the optimized routing path to a session, based on the user and network context. The integration of dynamic and distributed concepts in the mobility management, such as context-aware adaptive mobility anchoring and dynamic mobility support, allow the optimization of network resources and the improvement of user experience. The overall outcome demonstrates that decentralized mobility management is a promising direction, hence, its ideas should be taken into account by mobile operators in the deployment of future networks.
Resumo:
For the past decades it has been a worldwide concern to reduce the emission of harmful gases released during the combustion of fossil fuels. This goal has been addressed through the reduction of sulfur-containing compounds, and the replacement of fossil fuels by biofuels, such as bioethanol, produced in large scale from biomass. For this purpose, a new class of solvents, the Ionic Liquids (ILs), has been applied, aiming at developing new processes and replacing common organic solvents in the current processes. ILs can be composed by a large number of different combinations of cations and anions, which confer unique but desired properties to ILs. The ability of fine-tuning the properties of ILs to meet the requirements of a specific application range by mixing different cations and anions arises as the most relevant aspect for rendering ILs so attractive to researchers. Nonetheless, due to the huge number of possible combinations between the ions it is required the use of cheap predictive approaches for anticipating how they will act in a given situation. Molecular dynamics (MD) simulation is a statistical mechanics computational approach, based on Newton’s equations of motion, which can be used to study macroscopic systems at the atomic level, through the prediction of their properties, and other structural information. In the case of ILs, MD simulations have been extensively applied. The slow dynamics associated to ILs constitutes a challenge for their correct description that requires improvements and developments of existent force fields, as well as larger computational efforts (longer times of simulation). The present document reports studies based on MD simulations devoted to disclose the mechanisms of interaction established by ILs in systems representative of fuel and biofuels streams, and at biomass pre-treatment process. Hence, MD simulations were used to evaluate different systems composed of ILs and thiophene, benzene, water, ethanol and also glucose molecules. For the latter molecules, it was carried out a study aiming to ascertain the performance of a recently proposed force field (GROMOS 56ACARBO) to reproduce the dynamic behavior of such molecules in aqueous solution. The results here reported reveal that the interactions established by ILs are dependent on the individual characteristics of each IL. Generally, the polar character of ILs is deterministic in their propensity to interact with the other molecules. Although it is unquestionable the advantage of using MD simulations, it is necessary to recognize the need for improvements and developments of force fields, not only for a successful description of ILs, but also for other relevant compounds such as the carbohydrates.
Resumo:
O aquecimento do sistema climático é inequívoco e a influência humana é clara. A continuação da emissão de gases com efeito de estufa irá potenciar os impactes das alterações climáticas, representando um compromisso futuro que se perpetuará por vários séculos. As alterações climáticas não proporcionam uma experiência sensorial direta, embora as variações de temperatura e de precipitação e os extremos climáticos de vários tipos poderem ser experienciados. O cidadão comum não se apercebe do que está a acontecer, a menos que ocorram mudanças significativas, no estado normal do tempo para uma determinada época, na região do mundo onde ele vive. Mesmo para os especialistas, o problema só é cognoscível através de uma vasta rede científica, técnica e institucional. O conhecimento, é portanto, transmitido ao público em geral maioritariamente através de representações dos media sobre o discurso produzido pela comunidade científica. O principal objetivo deste trabalho é averiguar a interligação entre o discurso científico, o discurso mediático e as perceções da população portuguesa na temática das alterações climáticas. A metodologia utilizada, para a prossecução do objetivo, num trabalho que cruza o domínio científico da engenharia do ambiente com o das ciências sociais, encontra-se dividida em 3 fases principais: (1) Uma primeira fase onde se realiza uma análise ao discurso científico de produção nacional, com uma análise de conteúdo aos resumos dos artigos científicos, utilizando 884 resumos da base de dados Scopus de 1975 a 2013 com a palavra-chave ‘Climate Change’; (2) Uma segunda fase onde se analisa o conteúdo de notícias de meios de comunicação social portugueses, aplicando uma análise de conteúdo a 4340 notícias veiculadas por 4 órgãos de comunicação social (Correio da Manhã, Público, RTP e TSF) entre 2004 e 2013, utilizando os respetivos motores de busca online com a palavra-chave ‘Alterações Climáticas’; e, (3) uma terceira fase onde se compila a informação dos estudos existentes sobre a população portuguesa, utilizando os dados dos Eurobarómetros que incluem o tema das alterações climáticas de 1982 a 2014. Seguindo uma linha condutora que inclui o discurso científico, o discurso mediático e as perceções sociais, almejou-se uma abrangência do tema das alterações climáticas, investigando a existência do fenómeno e as respetivas causas, as consequências com a análise dos impactes e dos riscos associados a esses impactes e as soluções através de medidas de mitigação e de adaptação. Nos principais resultados emerge a evidência de que a intensidade de crescimento da produção científica nacional não se traduz num crescimento consistente dos índices de noticiabilidade dos órgãos de comunicação social e desde 2010 que o número de dias por ano, sem notícias sobre alterações climáticas, ultrapassa dos 50%. Em consequência, os níveis de informação da população portuguesa sobre as alterações climáticas são sistematicamente inferiores à média europeia. Em Portugal as taxas de pouco ou nulo conhecimento rondam os dois terços de inquiridos. Não obstante o seu caráter contínuo, para que as alterações climáticas se tornem alvo de interesse dos media é necessário que ocorram reuniões políticas, encontros científicos ou outros acontecimentos. A visibilidade alcançada pelos acontecimentos nacionais é muito fraca e os acontecimentos meteorológicos extremos, não são frequentemente relacionados com o fenómeno das alterações climáticas. No seio da comunidade científica portuguesa existe um claro consenso sobre a existência das alterações climáticas e das suas causas antropogénicas. No discurso mediático português não se verifica enviesamento da informação não sendo surpreendente os baixos níveis de ceticismo dos portugueses. A abordagem aos impactes das alterações climáticas, tanto no discurso científico como no discurso mediático, é robusta e em 2014, cerca de sete em dez portugueses afirma que as alterações climáticas são um problema muito sério. Contudo, Portugal apresenta a proporção mais baixa da Europa de respondentes que percepcionam as alterações climáticas como o problema mais grave que o mundo enfrenta. Para estes resultados poderá contribuir a baixa inclusão de termos relacionados com o risco, tanto no discurso científico como no mediático, não ultrapassando os 20%. Tanto o discurso científico como o discurso mediático não estão direcionados para as soluções (mencionando especificamente medidas de mitigação ou medidas de adaptação). A menção às medidas de mitigação e às medidas de adaptação não ultrapassam os 16% no discurso científico e apresentam valores ainda mais baixos no discurso mediático (13%). Em ambos os discursos existe uma clara preferência pela menção às medidas de adaptação em detrimento das medidas de mitigação. Com valores tão baixos na abordagem às soluções das alterações climáticas não surpreendem os também diminutos níveis de responsabilidade que a população portuguesa atribui a si própria no combate às alterações climáticas.
Resumo:
The planar design of solid oxide fuel cell (SOFC) is the most promising one due to its easier fabrication, improved performance and relatively high power density. In planar SOFCs and other solid-electrolyte devices, gas-tight seals must be formed along the edges of each cell and between the stack and gas manifolds. Glass and glass-ceramic (GC), in particular alkaline-earth alumino silicate based glasses and GCs, are becoming the most promising materials for gas-tight sealing applications in SOFCs. Besides the development of new glass-based materials, new additional concepts are required to overcome the challenges being faced by the currently existing sealant technology. The present work deals with the development of glasses- and GCs-based materials to be used as a sealants for SOFCs and other electrochemical functional applications. In this pursuit, various glasses and GCs in the field of diopside crystalline materials have been synthesized and characterized by a wide array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from 800−900 ºC for 1−1000 h. Furthermore, the influence of various ionic substitutions, especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties of resultant GCs has been investigated, in relevance with final application as sealants in SOFC. From the results obtained in the study of diopside-based glasses, a bilayered concept of GC sealant is proposed to overcome the challenges being faced by (SOFCs). The systems designated as Gd−0.3 (in mol%: 20.62MgO−18.05CaO−7.74SrO−46.40SiO2−1.29Al2O3 − 2.04 B2O3−3.87Gd2O3) and Sr−0.3 (in mol%: 24.54 MgO−14.73 CaO−7.36 SrO−0.55 BaO−47.73 SiO2−1.23 Al2O3−1.23 La2O3−1.79 B2O3−0.84 NiO) have been utilized to realize the bi-layer concept. Both GCs exhibit similar thermal properties, while differing in their amorphous fractions, revealed excellent thermal stability along a period of 1,000 h. They also bonded well to the metallic interconnect (Crofer22APU) and 8 mol% yttrium stabilized zirconium (8YSZ) ceramic electrolyte without forming undesirable interfacial layers at the joints of SOFC components and GC. Two separated layers composed of glasses (Gd−0.3 and Sr−0.3) were prepared and deposited onto interconnect materials using a tape casting approach. The bi-layered GC showed good wetting and bonding ability to Crofer22APU plate, suitable thermal expansion coefficient (9.7–11.1 × 10–6 K−1), mechanical reliability, high electrical resistivity, and strong adhesion to the SOFC componets. All these features confirm the good suitability of the investigated bi-layered sealant system for SOFC applications.
Resumo:
According to the World Health Organization, around 8.2 million people die each year with cancer. Most patients do not perform routine diagnoses and the symptoms, in most situations, occur when the patient is already at an advanced stage of the disease, consequently resulting in a high cancer mortality. Currently, prostate cancer is the second leading cause of death among males worldwide. In Portugal, this is the most diagnosed type of cancer and the third that causes more deaths. Taking into account that there is no cure for advanced stages of prostate cancer, the main strategy comprises an early diagnosis to increase the successful rate of the treatment. The prostate specific antigen (PSA) is an important biomarker of prostate cancer that can be detected in biological fluids, including blood, urine and semen. However, the commercial kits available are addressed for blood samples and the commonly used analytical methods for their detection and quantification requires specialized staff, specific equipment and extensive sample processing, resulting in an expensive process. Thus, the aim of this MSc thesis consisted on the development of a simple, efficient and less expensive method for the extraction and concentration of PSA from urine samples using aqueous biphasic systems (ABS) composed of ionic liquids. Initially, the phase diagrams of a set of aqueous biphasic systems composed of an organic salt and ionic liquids were determined. Then, their ability to extract PSA was ascertained. The obtained results reveal that in the tested systems the prostate specific antigen is completely extracted to the ionic-liquid-rich phase in a single step. Subsequently, the applicability of the investigated ABS for the concentration of PSA was addressed, either from aqueous solutions or urine samples. The low concentration of this biomarker in urine (clinically significant below 150 ng/mL) usually hinders its detection by conventional analytical techniques. The obtained results showed that it is possible to extract and concentrate PSA, up to 250 times in a single-step, so that it can be identified and quantified using less expensive techniques.
Resumo:
According to the World Health Organization, around 8.2 million people die each year with cancer. Most patients do not perform routine diagnoses and the symptoms, in most situations, occur when the patient is already at an advanced stage of the disease, consequently resulting in a high cancer mortality. Currently, prostate cancer is the second leading cause of death among males worldwide. In Portugal, this is the most diagnosed type of cancer and the third that causes more deaths. Taking into account that there is no cure for advanced stages of prostate cancer, the main strategy comprises an early diagnosis to increase the successful rate of the treatment. The prostate specific antigen (PSA) is an important biomarker of prostate cancer that can be detected in biological fluids, including blood, urine and semen. However, the commercial kits available are addressed for blood samples and the commonly used analytical methods for their detection and quantification requires specialized staff, specific equipment and extensive sample processing, resulting in an expensive process. Thus, the aim of this MSc thesis consisted on the development of a simple, efficient and less expensive method for the extraction and concentration of PSA from urine samples using aqueous biphasic systems (ABS) composed of ionic liquids. Initially, the phase diagrams of a set of aqueous biphasic systems composed of an organic salt and ionic liquids were determined. Then, their ability to extract PSA was ascertained. The obtained results reveal that in the tested systems the prostate specific antigen is completely extracted to the ionic-liquid-rich phase in a single step. Subsequently, the applicability of the investigated ABS for the concentration of PSA was addressed, either from aqueous solutions or urine samples. The low concentration of this biomarker in urine (clinically significant below 150 ng/mL) usually hinders its detection by conventional analytical techniques. The obtained results showed that it is possible to extract and concentrate PSA, up to 250 times in a single-step, so that it can be identified and quantified using less expensive techniques.
Resumo:
A sociedade atual requer indivíduos preparados para apresentar soluções inovadoras aos problemas encontrados nas mais variadas situações, sendo a criatividade considerada, na última década, uma competência essencial para o progresso. Neste contexto, emerge a necessidade da escola fomentar o seu desenvolvimento em qualquer área, e em particular, na Matemática. Por outro lado, não será alheio a este facto a promoção de um ensino, também ele, criativo. Tal ensino exige desde logo uma original, fluente e flexível gestão curricular envolvendo uma adequada seleção e ou (re) criação de tarefas relevantes, criteriosamente sequenciadas e autonomamente resolvidas pelos alunos, numa lógica de interdisciplinaridade e com recurso a tecnologia. No caso especifico das transformações geométricas isométricas, uma abordagem interdisciplinar reforçada com o recurso a ambientes de geometria dinâmica poderá constituir uma mais-valia nesse processo. Assim, desenvolveu-se este estudo, com o objetivo de avaliar o impacto de uma abordagem interdisciplinar, potenciada com o GeoGebra, no desenvolvimento de competências geométricas relacionadas com as isometrias, frisos e rosáceas, e em simultâneo, no desenvolvimento da criatividade e representações da mesma, de alunos do oitavo ano de escolaridade. Para isso desenvolveu-se um estudo de caso, centrado em três pares de alunos, que resolveram um conjunto de tarefas de natureza exploratória, com recurso ao GeoGebra e envolvendo a disciplina de Educação Visual. A análise dos dados recolhidos foi, essencialmente, de natureza qualitativa, tendo sido a observação, a inquirição e a análise documental,as principais técnicas de recolha de dados. A análise de conteúdo a que foram submetidos os dados, permitiu concluir que a implementação de uma abordagem interdisciplinar, centrada numa sequência de tarefas e aliada ao GeoGebra, potenciou a apropriação dos conhecimentos geométricos em causa e a sua aplicação. Contribuiu, também, para o desenvolvimento de atitudes favoráveis em relação à matemática e à geometria em particular. Por outro lado, os dados sugerem que tal abordagem permite obter indícios do desenvolvimento da criatividade nos alunos e de alterações a algumas das suas representações.
Resumo:
Significant improvements in human health have been achieved through the increased consumption of pharmaceutical drugs. However, most of these active pharmaceutical ingredients (APIs) are excreted by mammals (in a metabolized or unchanged form) into the environment. The presence of residual amounts of these contaminants was already confirmed in aqueous streams since treatment processes either wastewater treatment plants (WWTPs) or sewage treatment plants (STPs) are not specifically designed for this type of pollutants. Although they are present in aqueous effluents, they are usually at very low concentrations, most of the times below the detection limits of analytical equipment used for their quantification, hindering their accurate monitoring. Therefore, the development of a pre-concentration technique in order to accurately quantify and monitor these components in aqueous streams is of major relevance. This work addresses the use of liquid-liquid equilibria, applying ionic liquids (ILs), for the extraction and concentration of non-steroidal anti-inflammatory drugs (NSAIDs) from aqueous effluents. Particularly, aqueous biphasic systems (ABSs) composed of ILs and potassium citrate were investigated in the extraction and concentration of naproxen, diclofenac and ketoprofen from aqueous media. Both the extraction efficiency and concentration factor achievable by these systems was determined and evaluated. Within the best conditions, extraction efficiencies of 99.4% and concentration factors up to 13 times were obtained.
Resumo:
O objetivo do presente relatório de estágio é clarificar e sistematizar alguns conceitos associados à Avaliação Ambiental Estratégica (AAE) de Instrumentos de Gestão Territorial (IGT), e expor a aplicação desta ferramenta a um Plano Diretor Municipal (PDM). A Avaliação Ambiental Estratégica é um instrumento de avaliação da política de ambiente aplicado ao processo de planeamento para garantir que as considerações ambientais são integradas, a par das questões económicas e sociais, durante a fase de elaboração de planos e programas e antes da sua aprovação, com a finalidade de promover a adoção de soluções mais sustentáveis e o estabelecimento de diretrizes de seguimento que minimizem os impactes negativos. Em Portugal, a aplicação desta ferramenta de avaliação é um procedimento obrigatório desde a transposição da Diretiva 2001/42/CE, de 27 de junho para a ordem jurídica interna pelo Decreto-Lei n.º 232/2007, de 15 de junho. O processo de AAE desenvolve-se em três fases essenciais: o estabelecimento dos fatores críticos para a decisão, a avaliação e o seguimento. Este relatório de estágio analisa a aplicação da AAE à 1ª revisão do Plano Diretor Municipal de Castelo de Vide, onde se conclui que a identificação das oportunidades e riscos resultantes da estratégia de desenvolvimento territorial contribui para a prossecução do desenvolvimento sustentável e para uma tomada de decisão mais adequada.
Resumo:
O novo Regulamento das Características de Comportamento Térmico dos Edifícios (RCCTE) formula as exigências de forma que não evidencia as implicações sobre as soluções arquitectónicas e construtivas. A comunicação define um quadro de variáveis que caracterizam completamente o comportamento térmico dos edifícios e, com base nelas, constrói um modelo de cálculo que permite determinar as exigências de isolamento térmico da envolvente opaca e de protecção solar da envolvente não opaca. Considera depois gamas de valores típicos dessas variáveis e apresenta os resultados sob a forma de gráficos e de quadros. Apenas são contemplados edifícios de habitação.
Resumo:
Com o objectivo de desenvolver um sistema de monitorização de frotas de transportes públicos urbanos, cujo posicionamento de veículos seja feito com precisão superior a 10 m, a Faculdade de Ciências da Universidade de Lisboa juntamente com o Instituto das Ciências da Terra e do Espaço iniciaram o desenvolvimento de um protótipo, denominado SIMOV (Sistema de Monitorização de Veículos), com base na frota da CARRIS de Lisboa, usando o GPS (Global Positioning System) como único sistema de posicionamento. O sistema em desenvolvimento é composto por três módulos: posicionamento, comunicação e monitorização. Deste estudo apenas serão apresentadas as soluções para o posicionamento e para a monitorização. Relativamente ao posicionamento a apresentação centrar-se-á no estudo desenvolvido com vista ao uso de apenas dois satélites da constelação GPS em curtos períodos de tempo, frequente em circuitos urbanos, já que o posicionamento com três ou mais satélites é um dado adquirido, resultando fiável em termos da precisão pretendida. Para a monitorização (visualização do posicionamento) serão projectadas duas soluções, usando dados GPS recolhidos na execução do percurso habitual da carreira 38 da CARRIS, a primeira sobre uma base de dados cartográfica de eixos de via da cidade com precisão aproximada do metro e a segunda sobre a representação do trajecto como uma linha recta.
Resumo:
Dissertação mest., Ciências Biomédicas, Universidade do Algarve, 2010