report of the workshop on boosting SME development and competitiveness in the Caribbean

The Economic Commission for Latin America and the Caribbean (ECLAC) Subregional Headquarters for the Caribbean, in collaboration with the Division of Production, Productivity and Management at ECLAC Headquarters in Chile, convened a one-day workshop on “Boosting SME Development and Competitiveness in the Caribbean”, at the Subregional Headquarters for the Caribbean in Port of Spain on 14 May 2009. The workshop was the culmination of country studies that were carried out under an Italian Government-funded project to assess the policies, institutions and instruments for dynamic Small and Medium Enterprises (SME) development and competitiveness in Jamaica, Suriname and Trinidad and Tobago. The aim was to use the lessons learned from the three country studies to inform policy and practice in the other member countries of the Caribbean Development and Cooperation Committee (CDCC). The main objectives of the workshop were to: (a) share and discuss the findings of the country studies and lessons learned; (b) provide a forum for high quality discussion of the policy environment, instruments, business development and support services required for successful SME development in the Caribbean; and (c) map out a strategy for moving from analysis and recommendation to policy implementation and business changes in order to promote a dynamic and competitive SME sector. The workshop aimed to arrive at practical solutions to major constraints and a weighting of key actions in order of priority of implementation, by adopting a problem-solving approach. Participants at the workshop included representatives of key SME support institutions in the region, actual SMEs and academic researchers. The list of participants and provisional programme are annexed to this report.

Seleção de fornecedores e gestão logística nas importações da China: uma abordagem de processos e custos para pequenas e médias empresas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identificação dos fatores para o processo de formação e gestão de alianças estratégicas do tipo consórcio em pequenas e médias empresas construtoras: um estudo de caso

Estudo realizado em um consórcio de sociedades formado por pequenas e médias empresas construtoras para executar obras de saneamento na ilha do Marajó PA. O trabalho objetivou identificar fatores para o processo de formação e gestão de alianças estratégicas do tipo consórcio. A pesquisa teve caráter descritivo, com perspectiva sincrônica e nível de análise organizacional. Buscou descrever e interpretar as considerações analíticas e políticas relacionadas ao fenômeno em questão. Foram aplicadas entrevistas semi-estruturadas na coleta dos dados e utilizou-se o método de análise do conteúdo no tratamento das informações. A pesquisa permitiu identificar um conjunto de fatores, dentre eles: a perspectiva de complementaridade, o desejo da qualificação empresarial, a capacidade de gerar abertura de mercado, a aprendizagem organizacional, o estudo da combinação estratégica, a deliberação conjunta, a igualdade da propriedade e a conciliação das visões empresariais.

Memória organizacional e a constituição de bases de conhecimento

Pós-graduação em Ciência da Informação - FFC

A cultura informacional como alicerce de gestão contábil nas pequenas e médias empresas

Pós-graduação em Ciência da Informação - FFC

O uso do marketing B2B em pequenas e médias empresas: um estudo exploratório no setor de automação industrial do Vale do Paraíba paulista

Pós-graduação em Engenharia Mecânica - FEG

Dimensões de competitividade para a empresa Brasileira: informação e conhecimento, qualidade, tecnologia e meio ambiente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reposição florestal obrigatória no município de Presidente Venceslau

The growing concern over deforestation of native forests from Brazil to the marketing of wood in various sectors had made greater attention from lawmakers. In this context, did the reforestation, which came into existence to meet the demand for forest raw material. This paper attempts to make a survey, focusing on the interplay between small and medium producers, consumers of forest products and reforestation associations. For this, we conducted a survey of legislation at the federal and state since the emergence, evolution and current context for understanding the legal basis on the subject. In addition, literature reviews have been made seeking to direct the concepts and importance of reforestation, reforestation, forest plantations and productive use of the species Eucalyptus sp for the supply of forest raw material. Approach was also sought on the structure of the system of reforestation of the state of Sao Paulo and their assignments. We also present an in loco study of Chairman Wenceslas municipality in order to analyze the participation of the municipality in the reforest the region of Pontal Paranapanema and actions of regulatory agencies. As a result presents a survey of consumers of timber enterprises in the municipality of President Wenceslas based on the resolution SMA No. 082/2008, which describes the characteristics of these companies and their fields of activity

Análise da ABNT NBR ISO 14005:2012 como instrumento de implementação de sistemas de gestão ambiental em pequenas e médias empresas

The use of environmental management systems - EMS has shown to be a key tool for addressing the environmental aspects and impacts of an organization. The vast majority of EMS based on the requirements of ISO 14001:2004, as it is a globally recognized standard and adopt its recommendations is considered to be a guarantee of fulfilling the basic requirements of an EMS. Despite all the benefits that the system provides, we still find many problems in the implementation of EMS, especially in small and medium enterprises or SME. Most of the difficulties of implementation is related to intrinsic factors that companies of this size have, and issues related to the models and methods used to implement an EMS. Thus, this work aimed to assess whether the guidelines of ISO 14005:2012 meet the needs of SMEs for the effective implementation of an environmental management system. For it has been identified in the relation between SMEs and EMS the majof intrinsic problems of SMEs to implement (PII), such as lack of financial and human resources, and lack of commitment from top management to the SGA. Also was also pointed the main implementation issues related to ISO 14001 (ABNT, 2004) or the models or methods (PIM), highlighting the lack of environmental performance criteria, and the need for a path or sequence of steps for implementation. The study of ISO 14005 (ABNT, 2012) showed that the standard guidelines and implementation examples proposed, include solutions for all problems related to EMS implementation SMEs

Microbiota contaminante em bebidas lácteas fermentadas comerciais

Lately, the acceptability of fermented dairy beverages has been increased, due to the nutritional benefits, the practical consumption and the low cost of product for the manufacturers, and consequently for final market price to the consumers. During the manufacturing process, these products can be susceptible to microbiological contamination. The present study investigated the contaminant microbiota in fermented dairy beverages produced by small- and medium-sized companies, by means of analyses on moulds and yeasts counting, determination of the Most Probable Number (MPN) of total and thermo tolerant coliforms, Escherichia coli and Salmonella spp. detection, and determination of pH value. In spite of the absence of Salmonella spp., a high counts of yeasts and moulds were found, and E. coli was detected in five samples (16.67 %); and the sample were classified as “products in poor sanitary conditions”, because they showed thermo-tolerant coliforms counting higher than the standard established by the legislation in force. Therefore, quality programs such as Good Manufacturing Practices (GMP) and Hazard Analysis and Critical Control Points (HACCP) should be employed to prevent any contamination risk, in order to provide safe products to consumers.

Utilização dos sistemas integrados de gestão - ERP: estudo de múltiplos casos em pequenas e médias empresas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of CT numbers in limited and medium field-of-view scans taken using Accuitomo 170 and Veraviewepocs 3De cone-beam computed tomography scanners

To assess the influence of anatomic location on the relationship between computed tomography (CT) number and X-ray attenuation in limited and medium field-of-view (FOV) scans. Materials and Methods Tubes containing solutions with different concentrations of K2HPO4 were placed in the tooth sockets of a human head phantom. Cone-beam computed tomography (CBCT) scans were acquired, and CT numbers of the K2HPO4 solutions were measured. The relationship between CT number and K2HPO4 concentration was examined by linear regression analyses. Then, the variation in CT number according to anatomic location was examined. Results The relationship between K2HPO4 concentration and CT number was strongly linear. The slopes of the linear regressions for the limited FOVs were almost 2-fold lower than those for the medium FOVs. The absolute CT number differed between imaging protocols and anatomic locations. Conclusion There is a strong linear relationship between X-ray attenuation and CT number. The specific imaging protocol and anatomic location of the object strongly influence this relationship.

Green supply chain management and environmental performance of firms in the bioenergy sector in Brazil: an exploratory survey

To achieve sustainable development, supply chains must become greener. In this context, the importance of green supply chain management (GSCM) increases because it can contribute to improving firms'environmental performance (EP). However, little is known about these subjects in the context of firms in the bioenergy sector (sugarcane and ethanol production in Brazil). Thus, the objective of this work is to present the results of a survey conducted on 80 micro-, small-, and medium-sized firms that are suppliers in the Brazilian bioenergy sector (sugarcane and ethanol production). These results indicate that GSCM practices strengthen the EP of firms in the sector. Therefore, this article contributes to the existing literature because it addresses the relationship between GSCM and EP in an understudied sector (sugarcane and ethanol production). (C) 2014 Elsevier Ltd. All rights reserved.

Genomic analysis for managing small and endangered populations: a case study in Tyrol Grey cattle

Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (F ROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13-0.91 and 0.12-0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations.