Assessing the sustainability of brackish water aquaculture systems in the Phillipines. Working Paper 1: A typology of brackish-water pond aquaculture systems in the Philippines

Aquaculture in the Philippines is a long-standing activity but has witnessed relatively recent, rapid, technical change with the introduction of hatchery technology and commercial feed-mills changing the production possibilities for a fishpond operator. We are confronted with a diversity of aquaculture practices in the coastal areas of the Philippines, with new technologies being incorporated into more traditional systems. As a first step to understanding the sector, we therefore present a typology of farming systems with the motivation of generating domains (farm “types”) over which we can compare performance on a number of indicators. Our typology, restricted to brackish-water pond systems, is constructed using multivariate methods (principal components analysis, cluster analysis). Eight variables are used relating to the management of the farm across all the major factors of production. A stratified net sample of 136 observations provides the data for the analysis, from a farm-level survey carried out between January and June 2003 in the two main brackish-water production regions in the Philippines. We define five farm types from this analysis. In later work we will show how the use of this typology can be used for comparative study of economic, social and ecological performance at the farm-level. [PDF contains 42 pages]

Assessing the sustainability of brackish water aquaculture systems in the Philippines. Working Paper 4: Aquaculture and poverty - a case study of five coastal communities in the Philippines

After reviewing the rather thin literature on the subject, we investigate the relationship between aquaculture and poverty based on a case study of five coastal communities in the Philippines. The analysis relies on a data set collated through a questionnaire survey of 148 households randomly selected in these five communities. The methodological approach combines the qualitative analysis of how this relationship is perceived by the surveyed households and a quantitative analysis of the levels and determinants of poverty and inequality in these communities. There is overwhelming evidence that aquaculture benefits the poor in important ways and that it is perceived very positively by the poor and non-poor alike. In particular, the poor derive a relatively larger share of their income from aquaculture than the rich, and a lowering of the poverty line only reinforces this result. Further, a Gini decomposition exercise shows unambiguously that aquaculture represents an inequality-reducing source of income. We believe that the pro-poor character of brackish water aquaculture in the study areas is explained by the fact that the sector provides employment to a large number of unskilled workers in communities characterized by large surpluses of labour. Our results also suggest that the analysis of the relationship between aquaculture and poverty should not focus exclusively on the socio-economic status of the farm operator/owner, as has often been the case in the past. [PDF contains 51 pages]

Technologies and Methodologies for the Detection of Harmful Algae and Their Toxins, St Petersburg, Florida, Oct 22-24 2008 : workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop "Technologies and Methodologies for the Detection of Harmful Algae and their Toxins" convened in St. Petersburg, Florida, October 22- 24, 2008 and was co-sponsored by ACT (http://act-us.info); the Cooperative Institute for Coastal and Estuarine Environmental Technology (CICEET, http://ciceet.unh.edu); and the Florida Fish and Wildlife Conservation Commission (FWC, http://www.myfwc.com). Participants from various sectors, including researchers, coastal decision makers, and technology vendors, collaborated to exchange information and build consensus. They focused on the status of currently available detection technologies and methodologies for harmful algae (HA) and their toxins, provided direction for developing operational use of existing technology, and addressed requirements for future technology developments in this area. Harmful algal blooms (HABs) in marine and freshwater systems are increasingly common worldwide and are known to cause extensive ecological, economic, and human health problems. In US waters, HABs are encountered in a growing number of locations and are also increasing in duration and severity. This expansion in HABs has led to elevated incidences of poisonous seafood, toxin-contaminated drinking water, mortality of fish and other animals dependent upon aquatic resources (including protected species), public health and economic impacts in coastal and lakeside communities, losses to aquaculture enterprises, and long-term aquatic ecosystem changes. This meeting represented the fourth ACT sponsored workshop that has addressed technology developments for improved monitoring of water-born pathogens and HA species in some form. A primary motivation was to assess the need and community support for an ACT-led Performance Demonstration of Harmful Algae Detection Technologies and Methodologies in order to facilitate their integration into regional ocean observing systems operations. The workshop focused on the identification of region-specific monitoring needs and available technologies and methodologies for detection/quantification of harmful algal species and their toxins along the US marine and freshwater coasts. To address this critical environmental issue, several technologies and methodologies have been, or are being, developed to detect and quantify various harmful algae and their associated toxins in coastal marine and freshwater environments. There are many challenges to nationwide adoption of HAB detection as part of a core monitoring infrastructure: the geographic uniqueness of primary algal species of concern around the country, the variety of HAB impacts, and the need for a clear vision of the operational requirements for monitoring the various species. Nonetheless, it was a consensus of the workshop participants that ACT should support the development of HA detection technology performance demonstrations but that these would need to be tuned regionally to algal species and toxins of concern in order to promote the adoption of state of the art technologies into HAR monitoring networks. [PDF contains 36 pages]

State of Technology for In Situ Measures of Salinity Using Conductive Temperature Sensors, Savannah, Georgia, December 3-5, 2007: workshop proceedings

This Alliance for Coastal Technologies (ACT) workshop was convened to assess the availability and state of development of conductivity-temperature sensors that can meet the needs of coastal monitoring and management communities. Rased on the discussion, there are presently a number of commercial sensor options available, with a wide range of package configurations suitable for deployment in a range of coastal environments. However, some of the central questions posed in the workshop planning documents were left somewhat unresolved. The workshop description emphasized coastal management requirements and, in particular, whether less expensive, easily deployed, lower-resolution instruments might serve many management needs. While several participants expressed interest in this class of conductivity-temperature sensors, based on input from the manufacturers, it is not clear that simply relaxing the present level of resolution of existing instruments will result in instruments of significantly lower unit cost. Conductivity-temperature sensors are available near or under the $1,000 unit cost that was operationally defined at the workshop as a breakpoint for what might be considered to be a "low cost" sensor. For the manufacturers, a key consideration before undertaking the effort to develop lower cost sensors is whether there will be a significant market. In terms of defining "low cost," it was also emphasized that the "life cycle costs" for a given instrument must be considered (e.g., including personnel costs for deployment and maintenance). An adequate market survey to demonstrate likely applications and a viable market for lower cost sensors is needed. Another topic for the workshop was the introduction to the proposed ACT verification for conductivity-temperature sensors. Following a summary of the process as envisioned by ACT, initial feedback was solicited. Protocol development will be pursued further in a workshop involving ACT personnel and conductivity-temperature sensor manufacturers.[PDF contains 28 pages]

Recent Developments in In Situ Nutrient Sensors: applications and future directions, Savannah, Georgia, December 11-13, 2006: workshop proceedings

The Alliance for Coastal Technologies (ACT) convened a Workshop on "Recent Developments in In Situ Nutrient Sensors: Applications and Future Directions" from 11-13 December, 2006. The workshop was held at the Georgia Coastal Center in Savannah, Georgia, with local coordination provided by the ACT partner at the Skidaway Institute of Oceanography (University System of Georgia). Since its formation in 2000, ACT partners have been conducting workshops on various sensor technologies and supporting infrastructure for sensor systems. This was the first workshop to revisit a topic area addressed previously by ACT. An earlier workshop on the "State of Technology in the Development and Application of Nutrient Sensors" was held in Savannah, Georgia from 10-12 March, 2003. Participants in the first workshop included representatives from management, industry, and research sectors. Among the topics addressed at the first workshop were characteristics of "ideal" in situ nutrient sensors, particularly with regard to applications in coastal marine waters. In contrast, the present workshop focused on the existing commercial solutions. The in situ nutrient sensor technologies that appear likely to remain the dominant commercial options for the next decade are reagent-based in situ auto-analyzers (or fluidics systems) and an optical approach (spectrophotometric measurement of nitrate). The number of available commercial systems has expanded since 2003, and community support for expanded application and further development of these technologies appears warranted. Application in coastal observing systems, including freshwater as well as estuarine and marine environments, was a focus of the present workshop. This included discussion of possible refinements for sustained deployments as part of integrated instrument packages and means to better promote broader use of nutrient sensors in observing system and management applications. The present workshop also made a number of specific recommendations concerning plans for a demonstration of in situ nutrient sensor technologies that ACT will be conducting in coordination with sensor manufacturers.[PDF contains 40 pages]

Smaller Deborah number inducing more serrated plastic flow of metallic glass

Spherical nano-indentations of Cu46Zr54 bulk metallic glass (BMG) model systems were performed using molecular dynamics (MD) computer simulations, focusing specifically on the physical origin of serrated plastic flow. The results demonstrate that there is a direct correlation between macroscopic flow serration and underlying irreversible rearrangement of atoms, which is strongly dependent on the loading (strain) rate and the temperature. The serrated plastic flow is, therefore, determined by the magnitude of such irreversible rearrangement that is inhomogeneous temporally. A dimensionless Deborah number is introduced to characterize the effects of strain rate and temperature on serrations. Our simulations are shown to compare favorably with the available experimental observations.

A universal Biot number determining the susceptibility of ceramics to quenching

A universal Biot number of ceramics, which not only determines the susceptibility of the ceramics to quenching but also indicates the duration that the ceramics fail during thermal shock, is theoretically obtained. The present analysis shows that the thermal shock failure of the ceramics with a Biot number greater than this universal value is a very rapid process that just occurs in the initial regime of the heat conduction of the ceramics. This universal Biot number provides a guide to the selection of the ceramics applying to the thermostructural engineering including thermal shock.

Potential Application of Adsorptive Media to Enhance Phosphorus Uptake in Stormwater Basins and Wetlands at Lake Tahoe : literature review. Report to the University of California Davis Tahoe Research Group

Phosphorus removal by wetlands and basins in Lake Tahoe may be improved through designing these systems to filter storm water through media having higher phosphorus removal capabilities than local parent material. Substrates rich in iron, aluminum and calcium oftentimes have enhanced phosphorus removal. These substrates can be naturally occurring, byproducts of industrial or water treatment processes, or engineered. Phosphorus removal fundamentally occurs through chemical adsorption and/or precipitation and much of the phosphorus can be irreversibly bound. In addition to these standard media, other engineered substrates are available to enhance P removal. One such substrate is locally available in Reno and uses lanthanum coated diatomaceous earth for arsenate removal. This material, which has a high positive surface charge, can also irreversibly remove phosphorus. Physical factors also affect P removal. Specifically, specific surface area and particle shape affect filtration capacity, contact area between water and the surface area, and likelihood of clogging and blinding. A number of substrates have been shown to effectively remove P in case studies. Based upon these studies, promising substrates include WTRs, blast furnace slag, steel furnace slag, OPC, calcite, marble Utelite and other LWAs, zeolite and shale. However, other nonperformance factors such as environmental considerations, application logistics, costs, and potential for cementification narrow the list of possible media for application at Tahoe. Industrial byproducts such as slags risk possible leaching of heavy metals and this potential cannot be easily predicted. Fly ash and other fine particle substrates would be more difficult to apply because they would need to be blended, making them less desirable and more costly to apply than larger diameter media. High transportation costs rule out non-local products. Finally, amorphous calcium products will eventually cementify reducing their effectiveness in filtration systems. Based upon these considerations, bauxite, LWAs and expanded shales/clays, iron-rich sands, activated alumina, marble and dolomite, and natural and lanthanum activated diatomaceous earth are the products most likely to be tested for application at Tahoe. These materials are typically iron, calcium or aluminum based; many have a high specific surface area; and all have low transportation costs. (PDF contains 21 pages)

Estimation of the number of purse-seiner sets on tuna associated with dolphins in the Eastern Pacific Ocean during 1959-1980

ENGLISH: Annual estimates of the number of purse-seine sets made on tunas associated with dolphins are needed to estimate the total number of dolphins killed incidentally by the eastern Pacific tuna fishery. The most complete source of data, the Inter-American Tropical Tuna Commission's logbook data base, was used in this study. In the logbook data base, most sets are identified as being either associated with dolphins or not associated with dolphins. Some sets are not identified in this respect. However, the number of these unidentified sets which were associated with dolphins have been estimated by stratifying the logbook data according to whether or not any tuna were caught, whether or not the nearest identified set was associated with dolphins, and the distance to the nearest identified set. Most of the unidentified sets fell in strata characterized by a proportion of sets on tuna associated with dolphins that was lower than the overall unstratified proportion. Landings data were used to estimate the number of sets on tunas associated with dolphins from fishing trips not included in the logbook data base. SPANISH: Se necesitan las estimaciones anuales de la cantidad de lances realizados sobre atunes asociados con delfines para calcular todo el número de delfines muertos accidentalmente en la pesca atunera del Pacífico oriental. Se empleó en este estudio la fuente más completa-los datos de la Comisión Interamericana del Atún Tropical, proveniente de los cuadernos de bitácora. En éstos, la mayoría de los lances han sido identificados ya sea como asociados o no asociados con delfines. Algunos de los lances no han sido identificados a este respecto. Sin embargo, se ha estimado el número de estos lances asociados con delfines que no se habían identificado, al estratificar los datos de bitácora de acuerdo a si se había o no capturado atún, a si el lance identificado más próximo era o no un lance asociado con delfines y al averiguar la distancia del lance identificado más cercano. La mayoría de los lances sin identificar se colocan en los estratos caracterizados por una proporción de lances sobre atunes asociados con delfines, inferior a la proporción general sin estratificar. Se usaron los datos de los desembarques para calcular la cantidad de lances sobre atunes asociados con delfines en viajes pesqueros que no fueron incluídos en la base de los datos de bitácora. (PDF contains 73 pages.)

The survey of Lake Victoria's fishers

The findings are presented of a survey conducted regarding the fishers of Lake Victoria, which examined the relationships affecting supply flows of raw material on to the market, and also the characteristics of fishing activities and their effects on fish quality and distribution. Fish marketing plays a vital role in the lives of much of the lake basin's population, both in terms of employment and nutrition. The results of the survey comprise, in part, a base-line data set which will facilitate further research, analysis and management decision-making in relation to stakeholders of the lake's resources. Data collection, methods and research difficulties encountered are described and details given of a profile of a boat owner/renter and aslo of a profile of a crew member. The survey shows that Lake Victoria's fishery is one of very limited diversity. The fishers recount that they consistently target one or more of the 3 most common species within the lake (Nile perch, tilapia and dagaa) and very rarely consider any other species type. The largest proportion of fishers on the lake are Nile perch fishers; there is considerable demand for this species, and hence fishers have little incentive to either target alternative fish species, not to try and establish firm marketing outlets through the creation of arrangements with their principal buyers. In Kenyan waters, however, the number of Nile perch fishers is equaled by the number of dagaa fishers; this fish now commands a considerable portion of the market for fish from Lake Victoria through its availability as well as its relatively low prices. The tilapia fishery is in decline, and all 3 riparian states would not appear to be attracting investment almost certainly as a result of declining catches. For many of those working in Lake Victoria's fishery, the problems faced appear most often to be associated with the vagaries of an unstable market which may rise or fall depending on the state of the international market or the state of access roads to fish landings. (PDF contains 42 pages)

Intermediate serial cost-sharing rules

In this paper we give a generalization of the serial cost-sharing rule defined by Moulin and Shenker (1992) for cost sharing problems. According to the serial cost sharing rule, agents with low demands of a good pay cost increments associated with low quantities in the production process of that good. This fact might not always be desirable for those agents, since those cost increments might be higher than others, for example with concave cost functions. In this paper we give a family of cost sharing rules which allocates cost increments in all the possible places in the production process. And we characterize axiomatically each of them by means of an axiomatic characterization related to the one given for the serial cost-sharing rule by Moulin and Shenker (1994).

Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

Frame survey of Kainji Lake, northern Nigeria, 1996

Since 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gearSince 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gear. (PDF contains 44 pages)