Preventive Effect of Commercial Desensitizing Toothpastes on Bovine Enamel Erosion in vitro

This study evaluated in vitro commercial desensitizing toothpastes with respect to the prevention of erosion and explored the effect of their agents alone or in combination with fluoride. Bovine enamel blocks were randomly allocated to five groups of 20 and exposed to: Sensodyne ProNamel (1,425 ppm F as NaF, 5% KNO(3)), Sensodyne Original (no fluoride, 10% SrCl(2)), Colgate Sensitive (1,450 ppm F as sodium monofluorophosphate, 5% K citrate), Crest (fluoride-only toothpaste, 1,100 ppm F as NaF) and water (negative control). A second experiment was conducted with experimental dentifrices containing fluoride (NaF, 1,100 ppm F), 10% SrCl(2), 5% KNO(3) or 5% K citrate alone or the latter three combined with F. The samples were submitted to four cycles, alternating demineralization (cola, 10 min) and remineralization (artificial saliva, 1 h). Before and between cyclic de- and remineralization, blocks were treated with slurries of the respective toothpastes or water (1 min). Erosive tissue loss was analyzed by profilometry. Data were analyzed by Kruskal-Wallis and Dunn`s tests (p < 0.05). The mean erosion depth (+/- SE, mu m) was significantly less for Colgate Sensitive (0.04 +/- 0.00), Sensodyne Original (0.06 +/- 0.01) and Crest (0.07 +/- 0.01) than for Sensodyne ProNamel (2.36 +/- 0.25) or water (2.92 +/- 0.24), which did not significantly differ from each other. Both F and the desensitizing agents alone reduced erosion, but no additive effect was found. In addition, the combination of F and KNO(3) did not reduce erosion. These in vitro results suggest that the presence of fluoride or desensitizing substances in toothpastes, alone or in combination, can reduce erosion of enamel, but this is not valid for all the formulations. Copyright (C) 2010 S. Karger AG, Basel

Determination of eutectic solidification mode in Sr-modified hypoeutectic Al-Si alloys by EBSD

The effect of eutectic modification by strontium on nucleation and growth of the eutectic in hypoeutectic Al-Si foundry alloys has been investigated by electron back-scattering diffraction (EBSD) mapping. Specimens were prepared from three hypoeutectic AlSi base alloys with 5, 7 and 10 mass%Si and with different strontium contents up to 740 ppm for modification of eutectic silicon. By comparing the orientation of the aluminium in the eutectic to that of the surrounding primary aluminium dendrites? the growth mode of the eutectic could be determined. The mapping results indicate that the eutectic grew from the primary phase in unmodified alloys. When the eutectic was modified by strontium, eutectic grains nucleated separately from the primary dendrites. However, in alloys with high strontium levels, the eutectic again grew from the primary phase. These observed effects of strontium additions on the eutectic solidification mode are independent of silicon content in the range between 5 and 10 mass%Si.

Eutectic solidification in hypoeutectic Al-Si alloys: electron backscatter diffraction analysis

Nucleation and growth of the eutectic, in hypoeutectic Al-Si foundry alloys has been investigated by the electron backscatter diffraction (EBSD) mapping technique using a scanning electron microscope (SEM). Sample preparation procedures for optimizing mapping have been developed. To obtain a sufficiently smooth surface from a cast Al-Si eutectic microstructure for EBSD mapping, an appropriate preparation technique by ion milling was developed and applied instead of conventional electropolishing. By comparing the orientation of the aluminum in the eutectic to that of the surrounding primary aluminum dendrites, the growth mechanism of the eutectic can be determined. Two different results were found, in isolation or sometimes together, but distinct for different strontium contents: (1) crystallographic orientations of aluminum in eutectic and surrounding primary dendrites are identical, and (2) wide variation in orientations of the aluminum in the eutectic. (C) 2001 Elsevier Science Inc. All rights reserved.

Columnar to equiaxed transition of eutectic in hypoeutectic aluminium-silicon alloys

Directional solidification of unmodified and strontium modified binary, high-purity aluminium-7 wt% silicon and commercial A356 alloys has been carried out to investigate the mechanism of eutectic solidification. The microstructure of the eutectic growth inter-face was investigated with optical microscopy and Electron Backscattering Diffraction (EBSD). In the commercial alloys, the eutectic solidification inter-face extends in the growth direction and creates a eutectic mushy zone. A planar eutectic growth front is observed in the high-purity alloys. The eutectic aluminium has mainly the same crystallographic orientation as the dendrites in the unmodified alloys and the strontium modified high-purity alloy. A more complex eutectic grain structure is found in the strontium modified commercial alloy. A mechanism involving constitutional undercooling and a columnar to equiaxed transition explains the differences between pure and commercial alloys. It is probably caused by the segregation of iron and magnesium and the activation of nucleants in the commercial alloy. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

Síntese e fotosensibilização de nanotubos de titanatos

Nesta tese é descrita a preparação de nanotubos de titanatos (TNT) via síntese hidrotérmica alcalina, usando uma nova metodologia que evita a utilização de TiO2 cristalino como precursor. Foi estudada a influência da substituição sódio/protão na estrutura, morfologia e propriedades ópticas dos materiais preparados. Os resultados mostraram que a substituição Na+ → H+ resulta numa redução na distância intercamadas dos TNTs, tendo sido medidos valores entre 1.13±0.03 nm e 0.70±0.02 nm para aquele parâmetro. O comportamento óptico dos TNTs foi estudado na região UV-vis, estimando-se um hiato óptico de energia 3.27±0.03 eV para a amostra com maior teor de sódio enquanto que para a amostra protonada foi determinado um valor de 2.81±0.02 eV. Estes valores mostram que a troca iónica Na+ → H+ teve influência no desvio da banda de absorção dos TNTs para a região do visível próximo. A actividade fotocatalítica dos TNTs na degradação do corante rodamina 6G (R6G) foi posteriormente estudada. Verificou-se que, apesar de a amostra com maior teor de sódio ter sido a que exibiu maior capacidade para adsorver o R6G, foi a amostra protonada que apresentou a actividade catalítica mais elevada na fotodegradação deste corante. Numa segunda fase, e com o objectivo de preparar novos materiais nanoestruturados fotosensíveis, procedeu-se à decoração dos TNTs protonados com semicondutores (SC) nanocristalinos usando um método novo. Para o efeito os TNTs foram decorados com nanocristalites de ZnS, CdS e Bi2S3. Foi estudada a influência do tipo de semicondutor na estrutura, morfologia e propriedades ópticas dos SC/TNTs obtidos. Verificou-se que, para qualquer dos semicondutores usados no processo de decoração, a estrutura dos TNTs é preservada e não ocorre segregação do SC. Verificou-se ainda que a morfologia dos nanocompósitos preparados depende fortemente da natureza do semicondutor. No que respeita ao comportamento óptico destes materiais, foram determinados hiatos ópticos de energia 3.67±0.03 eV, 2.47±0.03 eV e 1.35±0.01 eV para as amostras ZnS/TNT, CdS/TNT e Bi2S3/TNT, respectivamente. Estes resultados mostram que através do processo de decoração de TNTs com semicondutores podem ser preparados materiais nanocompósitos inovadores, com propriedades ópticas novas e/ou pré-definidas numa gama alargada do espectro electromagnético.

Estudo da eficiência de deteção de um monitor portátil de contaminação de superfícies em função da distância e do débito de emissão da fonte

Introdução – No caso de uma eventual contaminação radioativa esta deve ser quantificada, pelo que é necessário garantir que as condições de funcionamento de um monitor de contaminação de superfícies se encontrem adequadamente caracterizadas, através da determinação da sua eficiência de deteção. Este estudo tem como objetivo determinar a eficiência de deteção de um monitor de contaminação e analisar a influência da distância e da atividade. Metodologia – O monitor de contaminação Thermo Mini 900E e as fontes radioativas planas de referência de Carbono – 14 (C-14), Césio – 137 (Cs-137), Estrôncio – 90 (Sr-90), Cloro – 36 (Cl-36) e Amerício – 241 (Am-241) com débito de emissão superficial rastreável ao Physikalish Technischen Bundesanstalt (PTB) foram utilizadas. Fontes de Sr-90 e C-14 com dois débitos de emissão distintos para cada e distâncias de 1 a 20mm foram usados para estudar a sua influência na eficiência de deteção. Resultados – Verificou-se que as fontes radioativas emissoras de partículas de maior energia apresentam uma maior eficiência de deteção e que esta diminui com o aumento da distância do detetor à fonte, sendo que os radioisótopos de maior energia apresentam um decréscimo na eficiência de 15% ao longo de 20mm, enquanto os radioisótopos de menor energia apresentam um decréscimo de 10%. Não se verificou uma influência expressiva do débito de emissão na eficiência de deteção deste monitor de contaminação. Conclusão – A eficiência de deteção de um monitor de contaminação portátil é dependente da distância deste à contaminação bem como do tipo de radiação emitida e energia dos radioisótopos presentes na contaminação. - ABSTRACT - Introduction – A radioactive contamination needs to be quantified in case it eventually occurs. Therefore it is necessary to ensure that the operating conditions of a surface contamination monitor are characterized by determining its detection efficiency. This experimental study aims to determine the detection efficiency of a contamination monitor and evaluate the distance and surface emission rate influence on the detection efficiency. Methodology – A contamination monitor Thermo Mini 900E was tested with reference radiation sources of Carbon – 14 (C-14), Cesium – 137 (Cs-137), Strontium – 90 (Sr-90), Chlorine – 36 (Cl-36) and Americium – 241 (Am-241) with its emission rate traced to the Physikalish Technischen Bundesanstalt (PTB). Sources of Sr-90 and C-14 with two different emission rates for each one and distances of 1 to 20mm were used to study its influence in the detection efficiency. Results – With the increasing of distance, the detection efficiency decreases. The most energetic radiation sources have higher detection efficiency, boasting a 15% decrease over 20mm whereas the sources bearing a smaller efficiency decrease 10%. No influence of the surface emission rate in the detection efficiency was verified. Conclusion – Thus, it is concluded that the detection efficiency of a contamination monitor is dependent of the distance between it and the contamination as well as the type and energy of the radioisotopes present in the contamination.

A high order model for piezoelectric rods: an asymptotic approach

Preprint submitted to International Journal of Solids and Structures. ISSN 0020-7683

Modelação, simulação e implementação de agitação acústica para aplicações em microfluídica

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

Estudio de los modos de vida e historia biológica de las poblaciones humanas de la región central de argentina desde el registro bioarqueológico. Lifestyles and biological history of human populations of the central region of argentina from bioarchaeological record.

Se pretende aportar al estudio de la estructura, historia biológica y estilos de vida de las poblaciones que habitaron la región central de Argentina durante el Holoceno, desde una perspectiva que combina los aportes teóricos y metodológicos de la Genética del paisaje y la Bioarqueología. Interesa a) identificar barreras de diferenciación morfológica entre poblaciones, b) poner a prueba modelos poblacionales para explicar la variación observada e identificar las variables que contribuyan a dicha diferenciación, c) evaluar la congruencia de los resultados obtenidos, d) reconstruir los patrones de movilidad residencial de las poblaciones, e) estudiar sus patrones dietarios considerando diferencias temporales y espaciales, f) identificar indicadores de diversos tipos de estrés (nutricional, funcional), así como traumas, g) estudiar las historias tafonómicas del registro bioarqueológico regional, y h) proponer un modelo para explicar el poblamiento y la evolución local de las poblaciones que habitaron esta región, a partir de la información arqueológica y bioantropológica. Para el análisis de los patrones espaciales de variación biológica se trabajará a partir del registro de rasgos epigenéticos craneales, medidas lineales y datos obtenidos a partir de morfometría geométrica sobre fotografías en 2D sobre muestras arqueológicas procedentes de esta región y de otras regiones geográficas de la Argentina. Para el análisis de la estructura de la población se trabajará a partir del cálculo de la matriz R para datos morfológicos y sus estimaciones derivadas (distancia D², Fst, coordenadas principales) y la aplicación del modelo de Harpending y Ward. Desde la genética del paisaje, se realizarán análisis de autocorrelación espacial, barreras genéticas y análisis geoestadísticos (kriging). Para el estudio de los modos de vida a partir del registro bioarqueológico se relevarán patologías dento-alveolares y alteraciones vinculadas con la salud bucal tales como desgaste dental –a nivel micro y macroscópico- caries, abscesos, pérdidas dentales antemortem, cálculos, hipoplasias, marcadores esqueletales de salud y lesiones traumáticas. Se analizarán isótopos estables (δ13C, δ15N, 86Sr y 87Sr) en restos óseos humanos de diversos sitios arqueológicos con el objetivo de reconstruir patrones dietarios y analizar la movilidad residencial y migración de las poblaciones. Paralelamente, se establecerán procedimientos de control tafonómico de los restos óseos, y se harán análisis específicos para estudiar las historias tafonómicas y evaluar el grado de integridad de los contextos de depositación y de las colecciones en general. Estimamos que el análisis de los patrones espaciales y temporales de variabilidad morfológica craneofacial, así como el estudio de las dietas a partir de información isotópica y bioarqueológica, de las migraciones y la movilidad residencial de las poblaciones a partir de isótopos de estroncio, la reconstrucción de comportamientos y actividades cotidianas a partir de marcadores de estrés músculo-esqueletal, en un marco cronológico y espacial constituye un aporte novedoso y eficaz que permitirá incrementar de manera substancial la información sobre la evolución de las poblaciones originarias del centro del territorio argentino. The aim of this project is to study the structure, biological history and lifestyles of the people that inhabitated the central region of Argentina during the Holocene, from a perspective that combines theoretical and methodological contributions of Landscape Genetics and Bioarchaeology. To analyze the spatial patterns of biological variation we consider epigenetic cranial traits, linear measurements and data obtained from geometric morphometric on 2D photographs. Morphological variation will be focused on landscape genetics (autocorrelation, genetic barriers and geostatistical analysis –kriging-) and population structure (matrix R, D², Fst, principal coordinates, Harpendig and Ward model). For the study of lifestyles from bioarchaeological record we consider alveolar pathologies and disorders related to oral health such as tooth wear, micro and macroscopic level, caries, abscesses, antemortem tooth loss, hypoplasia, markers skeletal health and traumatic injuries, as well as taphonomic processes. Stable isotopes will be analyzed (δ13C, d15N, 86Sr and 87Sr) in human skeletal remains from various archaeological sites in order to reconstruct and analyze dietary patterns of residential mobility and migration of populations. It will be established procedures of taphonomic control on skeletal remains, analysis to study taphonomic histories and assess the degree of completeness of depositional context and collection, in general terms. We consider that analysis of spatial and temporal patterns of variability in craniofacial morphology and the study of health and diets from isotopic and bioarchaeological data, migration and residential mobility patterns from strontium isotopes, as well as activity patterns from stress markers is a novel and effective contribution that will substantially increase the information about the local evolution of populations that inhabitated the center of Argentina.

The role of a transcrustal shear zone in orogenic gold mineralization at the Aijanahalli Mine, Dharwar Craton, South India

The Ajjanahalli gold mine is spatially associated with a Late Archean craton-scale shear zone in the eastern Chitradurga greenstone belt of the Dharwar craton, India. Gold mineralization is hosted by an similar to100-m-wide antiform in a banded iron formation. Original magnetite and siderite are replaced by a peak metamorphic alteration assemblage of chlorite, stilpnomelane, minnesotaite, sericite, ankerite, arsenopyrite, pyrite, pyrrhotite, and gold at ca. 300degrees to 350degreesC. Elements enriched in the banded iron formation include Ca, Mg, C, S, An, As, Bi. Cu, Sb, Zn, Pb, Se, Ag, and Te, whereas in the wall rocks As, Cu, Zn, Bi, Ag, and An are only slightly enriched. Strontium correlates with CaO, MgO, CO2, and As, which indicates cogenetic formation of arsenopyrite and Mg-Ca carbonates. The greater extent of alteration in the Fe-rich banded iron formation layers than in the wall rock reflects the greater reactivity of the banded iron formation layers. The ore fluids, as interpreted from their isotopic composition (delta(18)O = 6.5-8.5parts per thousand; initial Sr-87/Sr-86 = 0.7068-0.7078), formed by metamorphic devolatilization of deeper levels of the Chitradurga greenstone belt. Arsenopyrite, chalcopyrite, and pyrrhotite have delta(34)S values within a narrow range between 2.1 and 2.7 per mil, consistent with a sulfur source in Chitradurga greenstone belt lithologies. Based on spatial and temporal relationships between mineralization, local structure development, and sinistral strike-slip deformation in the shear zone at the eastern contact of the Chitradurga greenstone belt, we suggest that the Ajjanahalli gold mineralization formed by fluid infiltration into a low strain area within the first-order structure. The ore fluids were transported along this shear zone into relatively shallow crustal levels during lateral terrane accretion and a change from thrust to transcurrent tectonics. Based on this model of fluid flow, exploration should focus on similar low strain areas or potentially connected higher order splays of the first-order shear zone.

Plutonium from above-ground nuclear tests in milk teeth: investigation of placental transfer in children born between 1951 and 1995 in Switzerland.

BACKGROUND: Occupational risks, the present nuclear threat, and the potential danger associated with nuclear power have raised concerns regarding the metabolism of plutonium in pregnant women. OBJECTIVE: We measured plutonium levels in the milk teeth of children born between 1951 and 1995 to assess the potential risk that plutonium incorporated by pregnant women might pose to the radiosensitive tissues of the fetus through placenta transfer. METHODS: We used milk teeth, whose enamel is formed during pregnancy, to investigate the transfer of plutonium from the mother's blood plasma to the fetus. We measured plutonium using sensitive sector field inductively coupled plasma mass spectrometry techniques. We compared our results with those of a previous study on strontium-90 ((90)Sr) released into the atmosphere after nuclear bomb tests. RESULTS: Results show that plutonium activity peaks in the milk teeth of children born about 10 years before the highest recorded levels of plutonium fallout. By contrast, (90)Sr, which is known to cross the placenta barrier, manifests differently in milk teeth, in accordance with (90)Sr fallout deposition as a function of time. CONCLUSIONS: These findings demonstrate that plutonium found in milk teeth is caused by fallout that was inhaled around the time the milk teeth were shed and not from any accumulation during pregnancy through placenta transfer. Thus, plutonium may not represent a radiologic risk for the radiosensitive tissues of the fetus.

Environmental and biological controls on the geochemistry (δ18O, δ13C, Mg/Ca, and Sr/Ca) of living ostracods from Lake Geneva

ABSTRACT : Ostracods are benthic microcrustaceans enclosed in low-Mg calcite bivalves. Stable isotope compositions, Mg/Ca, and Sr/Ca ratios of ostracod fossil valves have proven useful to reconstruct past environmental conditions. Yet, several discrepancies persist and the influence of many factors remains unclear. It is the aim of this study to improve the use of ostracod valve geochemistry as palaeoenvironmental proxies by examining the extent of isotope fractionation and trace element partitioning during valve calcification. To achieve this, the environmental parameters (pH, temperature) and chemical composition of water (C-and O-isotope composition and calcium, magnesium, and strontium content) were measured at sites where living ostracods were sampled. The sampling was on a monthly basis over the course of one year at five different water depths (2, 5, 13, 33, and 70 m) in Lake Geneva, Switzerland. The one-year sampling enabled collection of environmental data for bottom and interstitial pore water. In littoral to sublittoral zones, C-isotope composition of DIC and the Mg/Ca and Sr/Ca ratios of water are found to vary concomitantly with water temperature. This is due to the precipitation of calcite, which is induced by higher photosynthetic activity as temperature and/or solar radiation intensify in summer. In deeper zones, environmental parameters remain largely constant throughout the year. Variations of pH, DIC concentrations and C-isotope compositions in interstitial water result from aerobic as well as anaerobic respiration, calcite dissolution and methanogenesis. Bathymetric distribution, life cycles, and habitats were derived for 15 ostracod species and are predominantly related to water temperature and sediment texture. O-isotope compositions of ostracod valves in Lake Geneva reflect that of water and temperature. However, offsets of up to 3 permil are observed in comparison with proposed inorganic calcite precipitation equilibrium composition. Deprotonation of HCO3- and/or salt effect at crystallisation sites may explain the disequilibrium observed for O-isotopic compositions. C-isotope compositions of ostracod valves are not as well constrained and appear to be controlled by a complex interaction between habitat preferences and seasonal as well as spatial variations of the DIC isotope composition. For infaunal forms, C-isotope compositions reflect mainly the variation of DIC isotope composition in interstitial pore waters. For epifaunal forms, C-isotope compositions reflect the seasonal variation of DIC isotope compositions. C-isotope compositions of ostracod valves is at equilibrium with DIC except for a small number of species (L. inopinata, L. sanctipatricii and possibly C. ophtalmica, and I. beauchampi). Trace element uptake differs considerably from species to species. For most epifaunal forms, trace element content follows the seasonal cycle, recording temperature increases and/or variations of Mg/Ca and Sr/Ca ratios of water. In contrast, infaunal forms are predominantly related to sediment pore water chemistry. RÉSUMÉ EN FRANÇAIS : Les ostracodes sont de petits crustacés benthiques qui possèdent une coquille faite de calcite à faible teneur en magnésium. La composition isotopique et les rapports Mg/Ca et Sr/Ca d'ostracodes fossiles ont été utilisés maintes fois avec succès pour effectuer des reconstructions paléoenvironnementales. Néanmoins, certains désaccords persistent sur l'interprétation de ces données. De plus, l'influence de certains facteurs pouvant biaiser le signal reste encore inconnue. Ainsi, le but de cette étude est de rendre plus performant l'emploi de la composition géochimique des ostracodes comme indicateur paléoenvironnemental. Pour réaliser cela, cinq sites situés dans le Léman à 2, 5, 13, 33 et 70 m de profondeur ont été choisis pour effectuer les échantillonnages. Chaque site a été visité une fois par mois durant une année. Les différents paramètres environnementaux (pH, température) ainsi que la composition géochimique de l'eau (composition isotopique de l'oxygène et du carbone ainsi que teneur en calcium, magnésium et strontium) ont été déterminés pour chaque campagne. Des ostracodes vivants ont été récoltés au cinq sites en même temps que les échantillons d'eau. Ce travail de terrain a permis de caractériser la géochimie de l'eau se trouvant juste au-dessus des sédiments ainsi que celle de l'eau se trouvant dans les interstices du sédiment. Dans les zones littorales à sublittorales, la composition isotopique du carbone inorganique dissout (CID) ainsi que les rapports Mg/Ca et Sr/Ca de l'eau varient linéairement avec la température. Ceci peut être expliqué par la précipitation de calcite qui est contrôlée par l'activité photosynthétique, variant elle même linéairement avec la température. Dans les zones plus profondes, les paramètres environnementaux restent relativement constants tout au long de l'année. Les variations du pH, de la concentration et de la composition isotopique du CID dans les sédiments résultent de la libération de carbone engendrée par la dégradation de la matière organique avec présence d'oxygène ou via réduction de nitrates et de sulfates, par la dissolution de carbonates, ainsi que par la méthanogenèse. La distribution bathymétrique, le cycle de vie ainsi que l'habitat de 15 espèces ont été déterminés. Ceux-ci sont principalement reliés à la température de l'eau et à la texture des sédiments. La composition isotopique de l'oxygène des valves d'ostracodes reflète celle de l'eau et la température qui régnait lors de la calcification. Néanmoins, des écarts pouvant aller jusqu'à 3 0/00 par rapport à l'équilibre théorique ont été obtenus. La déprotonation de HCO3 ou un 'effet de sel' pourrait être à l'origine du déséquilibre observé. La composition isotopique du carbone des valves d'ostracodes n'est pas aussi bien cernée. Celle-ci semble être principalement contrôlée par une interaction complexe entre l'habitat des ostracodes et les variations saisonnières et spatiales de la composition isotopique du CID. Pour les espèces endofaunes, la composition isotopique du carbone reflète principalement la variation de la composition isotopique du CID à l'intérieur des sédiments. Pour les formes épifaunes, c'est la variation saisonnière de la composition du CID qui contrôle celle de la coquille des ostracodes. En général, la composition isotopique du carbone des valves d'ostracodes est en équilibre avec celle de CID, hormis pour quelques rares espèces (L. inopinata, L. sanctipatricii et peut-être C. ophtalmica et I. beauchampi). L'incorporation des éléments traces diffère passablement d'une espèce à l'autre. Pour la plupart des espèces épifaunes, la teneur en éléments traces des coquilles reflète les variations saisonnières. Ces espèces semblent enregistrer les variations soit de la température soit des rapports Mg/Ca et Sr/Ca de l'eau. La teneur en élément traces des formes infaunales, au contraire, est principalement reliée à la chimie de l'eau interstitielle. RÉSUMÉ GRAND-PUBLIC : La connaissance de l'évolution du climat dans le futur est primordiale pour notre société, car elle permet de développer différentes stratégies pour faire face aux problèmes engendrés pas le changement climatique : stratégies environnementale, humanitaire, ou encore économique. Cette problématique est actuellement, à juste titre, sujet d'une vive préoccupation. La géologie peut-elle contribuer à l'effort communautaire entrepris? Naturellement, ce sont les climatologues qui sont sur le devant de la scène. Il n'empêche que ces derniers, pour pouvoir prédire l'avenir, doivent s'appuyer sur le passé. La géologie est alors d'un grand intérêt car c'est effectivement la seule science qui permette d'estimer les variations climatiques à grande échelle sur de longues périodes. Ainsi, voulant moi-même contribuer aux recherches menées dans ce domaine, je me suis tourné à la fin de mes études vers la paléoclimatologie, science qui a pour but de reconstruire le climat des temps anciens. Nous nous sommes rendu compte que l'évolution climatique de la région où nous habitons n'avait pas encore fait le sujet d'études approfondies. Il est pourtant important de connaître la variation locale des changements climatiques pour obtenir des modèles climatiques fiables. En conséquence, un vaste projet a vu le jour : reconstruire, à l'aide des sédiments du lac Léman, les variations paléoclimatiques et paléo-environnementales depuis le retrait du Glacier de Rhône, il y a environ 15'000 ans, jusqu'à nos jours. Pour ce genre de travail, la géochimie, qui est une forme de chimie, utilisée en science de la terre regroupant la chimie classique et la chimie isotopique, est une alliée particulièrement efficace. Elle permet en effet, via différentes mesures faites sur des archives géologiques (par exemple des fossiles ou des sédiments) d'obtenir des informations, souvent quantitatives, sur les conditions (le climat, la flore ou encore la bio productivité, etc...) qui régnaient il y a fort longtemps. Les coquilles d'ostracodes, qui sont de petits animaux vivant au fond des lacs, sont une des archives les plus prometteuses. Ces animaux sont des petits crustacés s'entourant d'une coquille calcaire qu'ils sécrètent eux-mêmes. A la mort de l'animal, la coquille est intégrée dans les sédiments et reste intacte à travers les âges. Des études ont montré qu'en analysant la géochimie de ces coquilles fossiles, il est possible de reconstruire les conditions environnementales qui régnaient à l'époque de vie de ces fossiles. Cette démarche nécessite qu'une condition bien précise soit remplie: la composition géochimique de la coquille doit enregistrer de manière fidèle la chimie de l'eau et/ou la température de l'eau présentes au moment de la sécrétion de la coquille. Le but spécifique de notre recherche a précisément été d'étudier la façon dont la chimie de l'eau ainsi que sa température sont enregistrées dans la coquillé des ostracodes. Une fois les relations entre ces divers paramètres dans l'étant actuel du système établies, il sera alors possible de les utiliser pour interpréter des données issues de coquilles fossiles. Pour ce faire, nous avons mesuré la température de l'eau de manière continue et récolté mensuellement des échantillons d'eau et des ostracodes vivants pendant une année. Cinq sites situés à 2, 5, 13, 33 et 70 mètres de profondeur ont été choisis pour effectuer ces échantillonnages dans le Léman. Le travail de terrain nous a amené à étudier la biologie de 15 espèces. Nous avons pu établir la profondeur à laquelle vivent ces animaux, leur période de développement ainsi que leur habitat respectifs. Ces résultats ont permis de mieux cerner la relation qu'il existe entre la chimie de l'eau, sa température et la composition géochimique des coquilles d'ostracodes. Nous avons ainsi pu confirmer que les coquilles d'ostracodes enregistrent de manière fidèle la composition chimique et isotopique de l'eau. De même, nous avons pu établir de manière plus précise l'effet de la température sur la géochimie des coquilles. Néanmoins, les relations trouvées entre ces trois éléments sont plus complexes pour certaines espèces, cette complexité étant souvent liée à un caractère spécifique de leur écologie. Nous avons mis en lumière certains effets qui biaisent les résultats et défini précisément les conditions dans lesquelles on peut s'attendre à avoir des difficultés dans leur interprétation. Maintenant que nous avons établi les relations entre le climat actuel et la composition géochimique des coquilles d'ostracodes actuels, nous pouvons, sur la base de ce modèle, reconstruire le climat depuis le retrait du Glacier du Rhône jusqu'à nos jours à l'aide d'ostracodes fossiles. Mais cela est une autre histoire et fera, je l'espère, le sujet de nos futures recherches.

Binding of ²³⁹Pu and ⁹⁰Sr to organic colloids in soil solutions: evidence from a field experiment.

Colloidal transport has been shown to enhance the migration of plutonium in groundwater downstream from contaminated sites, but little is known about the adsorption of ⁹⁰Sr and plutonium onto colloids in the soil solution of natural soils. We sampled soil solutions using suction cups, and separated colloids using ultrafiltration to determine the distribution of ²³⁹Pu and ⁹⁰Sr between the truly dissolved fraction and the colloidal fraction of the solutions of three Alpine soils contaminated only by global fallout from the nuclear weapon tests. Plutonium was essentially found in the colloidal fraction (>80%) and probably associated with organic matter. A significant amount of colloidal ⁹⁰Sr was detected in organic-rich soil solutions. Our results suggest that binding to organic colloids in the soil solutions plays a key role with respect to the mobility of plutonium in natural alpine soils and, to a lesser extent, to the mobility of ⁹⁰Sr.

Assessing sedimentary evolution by means of Sr-isotope ratios : 3 case studies on the Caribbean plate : (Cretaceous: Nicoya Peninsula, Costa Rica, Tertiary: Hess Rise, and La Désirade, Guadeloupe, France)

The understanding of sedimentary evolution is intimately related to the knowledge of the exact ages of the sediments. When working on carbonate sediments, age dating is commonly based on paleontological observations and established biozonations, which may prove to be relatively imprecise. Dating by means of strontium isotope ratios in marine bioclasts is the probably best method in order to precisely date carbonate successions, provided that the sample reflects original marine geochemical characteristics. This requires a precise study of the samples including its petrography, SEM and cathodoluminescence observations, stable carbon and oxygen isotope geochemistry and finally the strontium isotope measurement itself. On the Nicoya Peninsula (Northwestern Costa Rica) sediments from the Piedras Blancas Formation, Nambi Formation and Quebrada Pavas Formation were dated by the means of strontium isotope ratios measured in Upper Cretaceous Inoceramus shell fragments. Results have shown average 87Sr/86Sr values of 0.707654 (middle late Campanian) for the Piedras Blancas Formation, 0.707322 (Turonian-Coniacian) for the Nambi Formation and 0.707721 (late Campanian-Maastrichtian) for the Quebrada Pavas Formation. Abundant detrital components in the studied formations constitute a difficulty to strontium isotope dating. In fact, the fossil bearing sediments can easily contaminate the target fossil with strontium mobilized form basalts during diagenesis and thus the obtained strontium isotope ratios may be influenced significantly and so will the obtained ages. The new and more precise age assignments allow for more precision in the chronostratigraphic chart of the sedimentary and tectonic evolution of the Nicoya Peninsula, providing a better insight on the evolution of this region. Meteor Cruise M81 dredged shallow water carbonates from the Hess Rise and Hess Escarpment during March 2010. Several of these shallow water carbonates contain abundant Larger Foraminifera that indicates an Eocene-Oligocene age. In this study the strontium isotope values ranging from 0.707847 to 0.708238 can be interpreted as a Rupelian to Chattian age of these sediments. These platform sediments are placed on seamounts, now located at depths reaching 1600 m. Observation of sedimentologic characteristics of these sediments has helped to resolve apparent discrepancies between fossil and strontium isotope ages. Hence, it is possible to show that the subsidence was active during early Miocene times. On La Désirade (Guadeloupe France), the Neogene to Quaternary carbonate cover has been dated by microfossils and some U/Th-ages. Disagreements subsisted in the paleontological ages of the formations. Strontium isotope ratios ranging from 0.709047 to 0.709076 showed the Limestone Table of La Désirade to range from an Early Pliocene to Late Pliocene/early Pleistocene age. A very late Miocene age (87Sr/86Sr =0.709013) can be determined to the Detrital Offshore Limestone. The flat volcanic basement had to be eroded by wave-action during a long-term stable relative sea-level. Sediments of the Table Limestone on La Désirade show both low-stand and high-stand facies that encroach on the igneous basement, implying deposition during a major phase of subsidence creating accommodation space. Subsidence is followed by tectonic uplift documented by fringing reefs and beach rocks that young from the top of the Table Limestone (180 m) towards the present coastline. Strontium isotope ratios from two different fringing reefs (0.707172 and 0.709145) and from a beach rock (0.709163) allow tentative dating, (125ky, ~ 400ky, 945ky) and indicate an uplift rate of about 5cm/ky for this time period of La Désirade Island. The documented subsidence and uplift history calls for a new model of tectonic evolution of the area.

The hypogene iron oxide copper-gold mineralization in the Mantoverde District, Northern Chile

The Mantoverde iron oxide copper-gold (IOCC) district, northern Chile, is known for its Cu production from supergene ores. Recently, exploration outlined an additional hypogene ore resource of 440 Mt with 0.56 percent Cu, and 0.12 g/t An. The hypogene sulfide mineralization occurs mainly as chalcopyrite and pyrite, typically in specularite or magnetite-cemented breccias and associated stockworks. The host rocks underwent variably intense K feldspar alteration, chloritization, sericitization, silicification, and/or carbonatization. A district scale Na(-Ca) alteration is absent. The IOCC mineralization in the district shows a strong tectonic control by northwest- to north-northwest-trending brittle structures. Large Cu sulfide-rich veins or Cu sulfide-cemented breccias are absent. Therefore, head grades of 4 percent Cu are an exception. There is a positive correlation between Cu and An grades. Gold is probably contained mostly in chalcopyrite and pyrite. Elevated concentrations of light rare-earth elements (LREE) occur locally but are attributed to redistribution of LREE within the deposits rather than to derivation from external sources. The Cu-Au ores in the Mantoverde district are low in and have relatively low contents in heavy metals that are potentially hazardous to the environment, such as As (avg 14 ppm), Hg (<5 ppm), or Cd (<0.2 ppm). The sulfur isotope ratios of chalcopyrite from the IOCC deposits lie between -5.6 and 8.9 per mil delta(34)S(VCDT). They show systematic variations within the district, which are interpreted to reflect relative distance to inferred fluid conduits and the level of deposition within the hydrothermal system. Most initial (87)Sr/(86)Sr values of altered volcanic rocks and hydrothermal calcite from the Mantoverde district are between 0.7031 and 0.7060 and are similar to those of the igneous rocks of the region. Lead isotope ratios of chalcopyrite are consistent with Pb (and by inference Cu) derived from Early Cretaceous magmatism. The sulfur, strontium, and lead isotope data of chalcopyrite, calcite gangue, or altered host rocks, respectively, are compatible with a genetic model that involves cooling of metal and sulfur-bearing magmatic-hydrothermal fluids that mix with meteoric waters or seawater at relatively shallow crustal levels. An additional exotic sulfur input is likely, though not required, for the copper mineralization. Apart from the IOCC. deposits, there are a number of smaller magnetite(-apatite) bodies in the district. These are geologically similar to the Cu-Au-bearing magnetite bodies, but are related to splays of the north-south-trending Atacama fault zone and differ in alteration and texture.