Eficiência energética no sector residencial aplicada a consumos em modo de vigilância - o caso de estudo EcoFamílias

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente

Contribuição para o estudo da influência da recirculação de lixiviados no comportamento de aterros de resíduos sólidos urbanos

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, perfil em Engenharia Sanitária

Hospitalizations for ambulatory care-sensitive conditions, Minas Gerais, Southeastern Brazil, 2000 and 2010

OBJECTIVE To analyze hospitalization rates and the proportion of deaths due to ambulatory care-sensitive hospitalizations and to characterize them according to coverage by the Family Health Strategy, a primary health care guidance program. METHODS An ecological study comprising 853 municipalities in the state of Minas Gerais, under the purview of 28 regional health care units, was conducted. We used data from the Hospital Information System of the Brazilian Unified Health System. Ambulatory care-sensitive hospitalizations in 2000 and 2010 were compared. Population data were obtained from the demographic censuses. RESULTS The number of ambulatory care-sensitive hospitalizations declined from 20.75/1,000 inhabitants [standard deviation (SD) = 10.42) in 2000 to 14.92/thousand inhabitants (SD = 10.04) in 2010 Heart failure was the most frequent cause in both years. Hospitalizations rates for hypertension, asthma, and diabetes mellitus, decreased, whereas those for angina pectoris, prenatal and birth disorders, kidney and urinary tract infections, and other acute infections increased. Hospitalization durations and the proportion of deaths due to ambulatory care-sensitive hospitalizations increased significantly. CONCLUSIONS Mean hospitalization rates for sensitive conditions were significantly lower in 2010 than in 2000, but no correlation was found with regard to the expansion of the population coverage of the Family Health Strategy. Hospitalization rates and proportion of deaths were different between the various health care regions in the years evaluated, indicating a need to prioritize the primary health care with high efficiency and quality.

Miocene lithological, foraminiferal and palynological data from the Belverde borehole (Portugal)

XVIII Jornadas de Paleontología, 2002

Fuzzy clustering applied to a demand response model in a smatr grid contingency scenario

This paper focus on a demand response model analysis in a smart grid context considering a contingency scenario. A fuzzy clustering technique is applied on the developed demand response model and an analysis is performed for the contingency scenario. Model considerations and architecture are described. The demand response developed model aims to support consumers decisions regarding their consumption needs and possible economic benefits.

Development of a platform for lean manufacturing simulation games

More than ever, the economic globalization is creating the need to increase business competitiveness. Lean manufacturing is a management philosophy oriented to the elimination of activities that do not create any type of value and are thus considered a waste. One of the main differences from other management philosophies is the shop-floor focus and the operators' involvement. Therefore, the training of all organization levels is crucial for the success of lean manufacturing. Universities should also participate actively in this process by developing students' lean management skills and promoting a better and faster integration of students into their future organizations. This paper proposes a single realistic manufacturing platform, involving production and assembly operations, to learn by playing many of the lean tools such as VSM, 5S, SMED, poke-yoke, line balance, TPM, Mizusumashi, plant layout, and JIT/kanban. This simulation game was built in tight cooperation with experienced lean companies under the international program “Lean Learning Academy,”http://www.leanlearningacademy.eu/ and its main aim is to make bachelor and master courses in applied sciences more attractive by integrating classic lectures with a simulated production environment that could result in more motivated students and higher study yields. The simulation game results show that our approach is efficient in providing a realistic platform for the effective learning of lean principles, tools, and mindset, which can be easily included in course classes of less than two hours.

Citologia da cúpula vaginal com suspeita de lesão intraepitelial de grau indeterminado: estudo de caso

No presente artigo é relatado um caso de uma paciente de 42 anos, diagnosticada em 2011 com Adenocarcinoma in situ e displasia grave do epitélio de revestimento pavimentoso, que foi tratada por traquelectomia. Em Novembro de 2013, a paciente realizou uma citologia da cúpula vaginal, onde se observaram achados citológicos compatíveis com lesão intraepitelial de baixo grau mas também a presença de células que favorecem o diagnóstico de lesão intraepitelial de alto grau. Não sendo possível classificar a lesão intraepitelial como sendo claramente baixo ou alto grau, atribuiu-se a interpretação de lesão intraepitelial de grau indeterminado. Para confirmação e esclarecimento do diagnóstico foi efetuada biopsia com resultado de displasia grave do epitélio de revestimento pavimentoso vaginal sem evidência de invasão do estroma. Por fim foi indicada a pesquisa e tipificação de vírus do papiloma humano, com resultado positivo para o tipo 16. Diagnósticos citológicos de lesão intraepitelial de grau indeterminado apresentam um follow-up histológico estatisticamente diferente das lesões intraepiteliais de alto e baixo grau, e estão na sua maioria associadas a infeção por vírus do papiloma humano de alto risco. Os achados citológicos do presente estudo apoiam a necessidade de se estabelecer esta lesão como categoria de diagnóstico no Sistema de Bethesda, com um follow-up definido.

Contribuição para o estudo de compostos desreguladores endócrinos (EDC) em estações de tratamento de águas residuais (ETAR): estudo da remoção de EDC`S numa etar com tratamento terciário

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente – Perfil Engenharia Sanitária

Vulnerabilities in snakebites in Sao Paulo, Brazil

ABSTRACT OBJECTIVE To describe elements of vulnerability of victims of snakebite. METHODS This qualitative, descriptive, cross-sectional study had, as theoretical framework, the concept of vulnerability in individual, social, and programmatic dimensions. We interviewed 21 patients admitted into a hospital specialized in the care of accidents caused by venomous animals. The interviews were analyzed according to a discourse analysis technique. RESULTS Patients were mainly young men, living in remote countryside areas, where health services frequently have limited resources. We found social and individual conditions of vulnerability, such as precarious schooling, low professional qualification, housing without access to piped water, no sewage treated, and no regular garbage collection, and lack of knowledge on this health problem. Regarding the programmatic dimension, we found limited accessibility to the health services that could affect the prognosis and the frequency of sequelae and deaths. CONCLUSIONS Considering such vulnerabilities evoke the need to improve the program for control the Accidents by Venomous Animals and the training of health workers, we highlight the potential use of the concept of vulnerability, which may amplify the understanding and the recommendations for the practice and education related to snakebites.

Evaluation of the role of glutathione in the lead-induced toxicity in saccharomyces cerevisiae

The effect of intracellular reduced glutathione (GSH) in the lead stress response of Saccharomyces cerevisiae was investigated. Yeast cells exposed to Pb, for 3 h, lost the cell proliferation capacity (viability) and decreased intracellular GSH level. The Pb-induced loss of cell viability was compared among yeast cells deficient in GSH1 (∆gsh1) or GSH2 (∆gsh2) genes and wild-type (WT) cells. When exposed to Pb, ∆gsh1 and ∆gsh2 cells did not display an increased loss of viability, compared with WT cells. However, the depletion of cellular thiols, including GSH, by treatment of WT cells with iodoacetamide (an alkylating agent, which binds covalently to thiol group), increased the loss of viability in Pb-treated cells. In contrast, GSH enrichment, due to the incubation of WT cells with amino acids mixture constituting GSH (l-glutamic acid, l-cysteine and glycine), reduced the Pb-induced loss of proliferation capacity. The obtained results suggest that intracellular GSH is involved in the defence against the Pb-induced toxicity; however, at physiological concentration, GSH seems not to be sufficient to prevent the Pb-induced loss of cell viability.

Adapting remote labs to learning scenarios: case studies using VISIR and RemotElectLab

Remote laboratories are an emergent technological and pedagogical tool at all education levels, and their widespread use is an important part of their own improvement and evolution. This paper describes several issues encountered on laboratorial classes, on higher education courses, when using remote laboratories based on PXI systems, either using the VISIR system or an alternate in-house solution. Three main issues are presented and explained, all reported by teachers, that gave support to students' use of remote laboratories. The first issue deals with the need to allow students to select the actual place where an ammeter is to be inserted on electric circuits, even incorrectly, therefore emulating real-world difficulties. The second one deals with problems with timing when several measurements are required at short intervals, as in the discharge cycle of a capacitor. In addition, the last issue deals with the use of a multimeter in dc mode when reading ac values, a use that collides with the lab settings. All scenarios are presented and discussed, including the solution found for each case. The conclusion derived from the described work is that the remote laboratories area is an expanding field, where practical use leads to improvement and evolution of the available solutions, requiring a strict cooperation and information-sharing between all actors, i.e., developers, teachers, and students.

IX International conference on Remote Engineering and Virtual instrumentation REV 2012

THE ninth edition of the International Conference on Remote Engineering and Virtual Instrumentation (REV) [1] was held at the Faculty of Engineering of the University of Deusto, Bilbao (Spain), from the 4th to the 6th of July, 2012. A world-class research community in the subject of remote and virtual laboratories joined the event.

X Radiation dose implications in screening patients with ferromagnetic IOFBs prior to MRI: a literary review

Patients scheduled for a magnetic resonance imaging (MRI) scan sometimes require screening for ferromagnetic Intra Orbital Foreign Bodies (IOFBs). To assess this, they are required to fill out a screening protocol questionnaire before their scan. If it is established that a patient is at high risk, radiographic imaging is necessary. This review examines literature to evaluate which imaging modality should be used to screen for IOFBs, considering that the eye is highly sensitive to ionising radiation and any dose should be minimised. Method: Several websites and books were searched for information, these were as follows: PubMed, Science Direct, Web of Knowledge and Google Scholar. The terms searched related to IOFB, Ionising radiation, Magnetic Resonance Imaging Safety, Image Quality, Effective Dose, Orbits and X-ray. Thirty five articles were found, several were rejected due to age or irrelevance; twenty eight were eventually accepted. Results: There are several imaging techniques that can be used. Some articles investigated the use of ultrasound for investigation of ferromagnetic IOFBs of the eye and others discussed using Computed Tomography (CT) and X-ray. Some gaps in the literature were identified, mainly that there are no articles which discuss the lowest effective dose while having adequate image quality for orbital imaging. Conclusion: X-ray is the best method to identify IOFBs. The only problem is that there is no research which highlights exposure factors that maintain sufficient image quality for viewing IOFBs and keep the effective dose to the eye As Low As Reasonably Achievable (ALARA).

A balance between image quality and effective dose in orbital X-ray screening for ferromagnetic IOFBs: a pilot study

Purpose: To investigate whether standard X-ray acquisition factors for orbital radiographs are suitable for the detection of ferromagnetic intra-ocular foreign bodies in patients undergoing MRI. Method: 35 observers, at varied levels of education in radiography, attending a European Dose Optimisation EURASMUS Summer School were asked to score 24 images of varying acquisition factors against a clinical standard (reference image) using two alternative forced choice. The observers were provided with 12 questions and a 5 point Likert scale. Statistical tests were used to validate the scale, and scale reliability was also measured. The images which scored equal to, or better than, the reference image (36) were ranked alongside their corresponding effective dose (E), the image with the lowest dose equal to or better than the reference is considered the new optimum acquisition factors. Results: Four images emerged as equal to, or better than, the reference in terms of image quality. The images were then ranked in order of E. Only one image that scored the same as the reference had a lower dose. The reference image had a mean E of 3.31μSv, the image that scored the same had an E of 1.8μSv. Conclusion: Against the current clinical standard exposure factors of 70kVp, 20mAs and the use of an anti- scatter grid, one image proved to have a lower E whilst maintaining the same level of image quality and lesion visibility. It is suggested that the new exposure factors should be 60kVp, 20mAs and still include the use of an anti-scatter grid.