L’opinion des Canadiens et des Américains au sujet des changements climatiques: un écart important?

Cette note présente des résultats de deux importants sondages menés en parallèle dans les deux pays. Au Canada, nos données sont tirées du plus récent Canadian Survey on Energy and the Environment (CSEE, Lachapelle et al. 2015) et aux États-Unis, nous rapportons les résultats du National Survey on Energy and the Environment (NSEE). Réalisés au mois de septembre 2015, ces deux sondages ont soumis les mêmes questions à des échantillons représentatifs des populations du Canada et des États-Unis.

Recycling of NR Based Cured Latex Material Reclaimed with 2,2'-Dibenzamidodiphenyldisulphide in a TruckTire Tread Compound

It is observed that reclamation of natural rubber latex based rubber using 2,2'-dibenzamidodiphenvldisulphide as reclaiming agent is an optional methodology for recycling of waste latex rubber (WLR). For progressive replacement of virgin natural rubber by the reclaim, two alternatives curing system were investigated: adjustment or reduction of the curing system with increasing reclaim content, to compensate for the extra amount of curatives brought along by the reclaim. For fixed curing system, as if the reclaim were equivalent to virgin NR. The cure behavior, final crosslink density and distribution, mechanical properties, and dynamic viscoelastic properties of the blends with reclaimed WLR are measured and compared with the virgin compound. The morphology of the blends, sulfur migration, and final distribution are analyzed.The mechanical and dynamic viscoelastic properties deteriorate for both curing systems, but to a lesser extent for fixed curing system compared to adjusted curing system. With the fixed cure system, many properties like tensile strength and compression set do still deteriorate, but tan 6 and Mrrr„/Murxr, representative for the rolling resistance of tires are improved. On the other hand, with the adjusted cure system both mechanical and dynamic properties still deteriorate.

First Example of Organocatalysis by Polystyrene-Supported PAMAM Dendrimers: Highly Efficient and Reusable Catalyst for Knoevenagel Condensations

This paper describes the first use of polystyrene-supported poly(amidoamine) (PAMAM) dendrimers as heterogeneous basic organocatalysts for carbon–carbon bond formation. Polystyrene-supported PAMAM dendrimers of first, second and third generations have been used as reusable base catalysts in Knoevenagel condensations of carbonyl compounds with active methylene compounds. The reactions proceed in short periods of time and with 100% selectivity. This novel catalyst eliminates the use of aromatic and halogenated solvents, as well as complex purification processes. The catalysts can be recycled ten times.

Recyclable Short Fibre Reinforced Plastics PP/Nylon and HDPE/Nylon composites

The study shows that standard plastics like polypropylene and high density polyethylene can be reinforced by adding nylon short fibres. Compared to the conventional glass reinforced thermoplastics this novel class of reinforced thermoplastics has the major advantage of recyclability. Hence such composites represent a new spectrum of recyclable polymer composites. The fibre length and fibre diameter used for reinforcement are critical parameters While there is a critical fibre length below which no effective reinforcement takes place, the reinforcement improves when the fibre diameter decreases due to increased surface area.While the fibres alone give moderate reinforcement, chemical modification of the matrix can further improve the strength and modulus of the composites. Maleic anhydride grafting in presence of styrene was found to be the most efficient chemical modification. While the fibre addition enhances the viscosity of the melt at lower shear rates, the enhancement at higher shear rate is only marginal. This shows that processing of the composite can be done in a similar way to that of the matrix polymer in high shear operations such as injection moulding. Another significant observation is the decrease in melt viscosity of the composite upon grafting. Thus chemical modification of matrix makes processing of the composite easier in addition to improving the mechanical load bearing capacity.For the development of a useful short fibre composite, selection of proper materials, optimum design with regard to the particular product and choosing proper processing parameters are most essential. Since there is a co-influence of many parameters, analytical solutions are difficult. Hence for selecting proper processing parameters 'rnold flow' software was utilized. The orientation of the fibres, mechanical properties, temperature profile, shrinkage, fill time etc. were determined using the software.Another interesting feature of the nylon fibre/PP and nylon fibre/HDPE composites is their thermal behaviour. Both nylon and PP degrade at the same temperature in single steps and hence the thermal degradation behaviour of the composites is also being predictable. It is observed that the thermal behaviour of the matrix or reinforcement does not affect each other. Almost similar behaviour is observed in the case of nylon fibre/HDPE composites. Another equally significant factor is the nucleating effect of nylon fibre when the composite melt cools down. In the presence of the fibre the onset of crystallization occurs at slightly higher temperature.When the matrix is modified by grafting, the onset of crystallization occurs at still higher temperature. Hence it may be calculated that one reason for the improvement in mechanical behaviour of the composite is the difference in crystallization behaviour of the matrix in presence of the fibre.As mentioned earlier, a major advantage of these composites is their recyclability. Two basic approaches may be employed for recycling namely, low temperature recycling and high temperature recycling. In the low temperature recycling, the recycling is done at a temperature above the melting point of the matrix, but below that of the fibres while in the high temperature route. the recycling is done at a temperature above the melting points of both matrix and fibre. The former is particularly interesting in that the recycled material has equal or even better mechanical properties compared to the initial product. This is possible because the orientation of the fibre can improve with successive recycling. Hence such recycled composites can be used for the same applications for which the original composite was developed. In high temperature recycling, the composite is converted into a blend and hence the properties will be inferior to that of the original composite, but will be higher than that of the matrix material alone.

Optimisation of the Mechanical Properties of HDPE/PP Blends and Their Recyclable Composites

This study was undertaken in order to upgrade blends of HDPE and PP, two of the most widely used standard plastics so as to widen their application spectrum. Dicumyl peroxide was used as the modifier for the upgradation. Optimum concentration of dicumyl peroxide required for modification was detennined by measurement of mechanical, rheological, thermal and morphological properties. Selected blends were used to prepare recyclable composites with nylon clothes by compression moulding. The composites were characterized by measurement of mechanical and thermal properties. The composites were recycled and the mechanical propertics of the recycled material were determined.

Zeolite encapsulated complexes of ruthenium: synthesis, characterisation and catalytic activity studies

The work presented in this thesis is mainly centered on the synthesis and characterization of some encapsulated transition metal complexes and the catalytic activity of the synthesized complexes in certain organic reactions.thesis deals with the catalytic activity of ruthenium-exchanged zeolite and the zeolite encapsulated complexes of SSC, SOD, SPD, AA, ABA, DMG, PCO, PCP, CPO and CPP in the hydroxylation of phenol using hydrogen peroxide. The products were analyzed with a GC to determine the percentage conversion and the chromatograms indicate the presence of different products like hydroquinone, catechol,benzoquinone, benzophenone etc. The major product formed is hydroquinone. From the screening studies, RuYSSC was found to be the most effective catalyst for phenol hydroxylation with 94.4% conversion and 76% hydroquinone selectivity. The influence of different factors like reaction time, temperature, amount of catalyst, effect of various solvents and oxidant to substrate ratio in the catalytic activity were studied in order to find out the optimum conditions for the hydroxylation reaction. The influence of time on the percentage conversion of phenol was studied by conducting the reactions for different durations varying from one hour to four hours. There is an induction period for all the complexes and the length of the induction period depends on the nature of the active components. Though the conversion of phenol and selectivity for hydroquinone. increases with time, the amount of benzoquinone formed decreases with time. This is probably due to the decomposition of benzoquinone formed during the initial stages of the reaction into other degradation products like benzophenones. The effect of temperature was studied by carrying out the reaction at three different temperatures, 30°C, 50°C and 70°C. Reactions carried at temperatures higher than 70°C result either in the decomposition of the products or in the formation of tarry products. Activity increased with increase in the amount of the catalyst up to a certain level. However further increase in the weight of the catalyst did not have any noticeable effect on the percentage conversion. The catalytic studies indicate that the oxidation reaction increases with increase in the volume of hydrogen peroxide till a certain volume. But further increase in the volume of H202 is detrimental as some dark mass is obtained after four hours of reaction. The catalytic activity is largely dependent on the nature of the solvent and maximum percentage conversion occurred when the solvent used is water. The intactness of the complexes within the zeolite cages enhances their possibility of recycling and the activities of the recycled catalysts show only a slight decrease when compared to the fresh samples .

Role of Rab5 in synaptic vesicle recycling

During synaptic transmission, NT-filled synaptic vesicles are released by Ca2+-triggered exocytosis at the active zone. Following exocytosis, SV membrane is immediately re-internalized and synaptic vesicles (SVs) are regenerated by a local recycling mechanism within the presynaptic terminal. It is debated whether an endosomal compartment is involved in this recycling process. In contrast, it is well known from cultured mammalian cells, that endocytic vesicles fuse to the early sorting endosome. The early endosome is a major sorting station of the cell where cargo is send into the degradative pathway to late endosome and lysosome or towards recycling. Each trafficking step is mediated by a certain protein of the Rab family. Rab proteins are small GTPases belonging to the Ras superfamily. They accumulate at their target compartments and have thereby been used as markers for the different endocytic organelles in cultured mammalian cells. Rab5 controls trafficking from the PM to the early endosome and has thereby been used as marker for this compartment. A second marker is based on the specific binding of the FYVE zinc finger protein domain to the lipid PI(3)P that is specifically generated at the early endosomal membrane. This study used the Drosophila NMJ as a model system to investigate the SV recycling process. In particular, three questions were addressed: First, is an endosomal compartment present at the synapse? Second, do SVs recycle through an endosome? Third, is Rab5 involved in SV recycling? We used GFP fusions of Rab5 and 2xFYVE to visualize endosomal compartments at the presynaptic terminal of Drosophila third instar larval NMJs. Furthermore, the endosomes are located within the pool of recycling SVs, labeled with the styryl-dye FM5-95. Using the temperature-sensitive mutation in Dynamin, shibirets, we showed that SV recycling involves trafficking through an intermediate endosomal compartment. In cultured mammalian cells, interfering with Rab5 function by expressing the dominant negative version, Rab5SN causes the fragmentation of the endosome and the accumulation of endocytic vesicles. In contrast, when Rab5 is overexpressed enlarged endosomal compartments were observed. In Drosophila, the endosomal compartment was disrupted when loss of function and dominant negative mutants of Rab5 were expressed. In addition, at the ultrastructural we observed an accumulation of endocytic vesicles in Rab5S43N expressing terminals and enlarged endosomes when Rab5 was overexpressed. Furthermore, interfering with Rab5 function using the dominant negative Rab5S43N caused a decrease in the SV recycling kinetics as shown by FM1-43 experiments. In contrast, overexpression of Rab5 or GFP-Rab5 caused an increase in the FM1-43 internalization rate. Finally, standard electrophysiological techniques were used to measure synaptic function. We found that the Rab5-mediated endosomal SV recycling pathway generates vesicles with a higher fusion efficacy during Ca2+-triggered release, compared to SVs recycled when Rab5 function was impaired. We therefore suggest a model in which the endosome serves as organelle to control the SV fusion efficacy and thereby the synaptic strength. Since changes in the synaptic strength are occuring during learning and memory processes, controlling endosomal SV recycling might be a new molecular mechanism involved in learning and memory.

Farmers’ desired traits and selection criteria for maize varieties and their implications for maize breeding: A case study from KwaZulu-Natal Province, South Africa

Adoption of hybrids and improved varieties has remained low in the smallholder farming sector of South Africa, despite maize being the staple food crop for the majority of households. The objective of this study was to establish preferred maize characteristics by farmers which can be used as selection criteria by maize breeders in crop improvement. Data were collected from three villages of a selected smallholder farming area in South Africa using a survey covering 300 households and participatory rural appraisal methodology. Results indicated a limited selection of maize varieties grown by farmers in the area compared to other communities in Africa. More than 97% of the farmers grew a local landrace called Natal-8-row or IsiZulu. Hybrids and improved open pollinated varieties were planted by less than 40% of the farmers. The Natal-8-row landrace had characteristics similar to landraces from eastern and southern Africa and closely resembled Hickory King, a landrace still popular in Southern Africa. The local landrace was preferred for its taste, recycled seed, tolerance to abiotic stresses and yield stability. Preferred characteristics of maize varieties were high yield and prolificacy, disease resistance, early maturity, white grain colour, and drying and shelling qualities. Farmers were willing to grow hybrids if the cost of seed and other inputs were affordable and their preferences were considered. Our results show that breeding opportunities exist for improving the farmers’ local varieties and maize breeders can take advantage of these preferred traits and incorporate them into existing high yielding varieties.

Plan exportador para la empresa DAGALA plásticos E.U

La internacionalización es un paso muy importante para las empresas que desean alcanzar mercados exteriores e incrementar ventas asegurando la sostenibilidad en el tiempo. La globalización viene siendo un tema crucial no solo para las naciones sino también para las empresas. Mientras que los gobiernos deben preocuparse por establecer políticas que los haga competitivos frente al mundo, las empresas, estando en ese lecho de políticas deben generar estrategias que garantice su perdurabilidad en los mercados. Por otro lado las empresas deben ser conscientes que las necesidades se transforman y en cuanto esto pase, las organizaciones deben tener la capacidad de respuesta oportuna para satisfacer lo que la demanda requiera, pues los consumidores de hoy, son altamente exigentes y difícilmente fieles. Las empresas que desean internacionalizarse deben ser estrategas para realizar los pasos adecuados tomando las decisiones más acertadas, por lo que esta investigación busca basarse en fuentes bibliográficas y guías en expertos para consolidar la información y traducirla en el diseño del plan exportador que busque reducir riesgos. DAGALA Plásticos E.U es la empresa en la cual esta investigación se va a basar, dicha organización es una pyme colombiana que se dedica a la producción de ganchos plásticos de excelente calidad con material reciclado (polipropileno). Por ende es una empresa que pertenece al sector de los plásticos, pero se enfoca a un nicho de mercado mucho más popular pues el producto que ofrecen es de bajo precio debido al material que usan. Su clasificación internacional industrial uniforme es 2529 que hace referencia a la fabricación de artículos de plástico, este código está acorde con el International Standard of Industrial Classification of All Economic Activities (ISIC) el cual es el código internacional desarrollado por UN como una manera estándar para la calificación de las actividades económicas. Se busca diseñar el plan exportador para dicha empresa, dividiendo el estudio en etapas. En la primera se pretende realizar un diagnóstico situacional con el fin de saber cómo está la empresa actualmente lo cual nos resolverá su potencial para exportar dado en fortalezas y debilidades. Si la primera etapa arroja resultados satisfactorios, el siguiente paso es realizar un estudio de mercado para encontrar el país más propicio a exportar, con un análisis debido de competencia y de barreras al comercio. Por el contrario, si no arrojan resultados positivos, se enfocará en las debilidades para hacer más posible en un futuro la exportación. La tercera etapa se concentrará en formular la logística del producto desde su punto de fabricación hasta el país final. Y finalmente se concluirá el trabajo. (Etapas en la redacción del estudio de caso de DAGALA Plásticos-preliminar-planeación-organización- desarrollo-conclusión)

La experiencia de los receptores en el trasplante de órganos y tejidos

El trasplante de órganos y/o tejidos es considerado como una opción terapéutica viable para el tratamiento tanto de enfermedades crónicas o en estadios terminales, como de afectaciones no vitales, pero que generen una disminución en la calidad de vida percibida por el paciente. Este procedimiento, de carácter multidimensional, está compuesto por 3 actores principales: el donante, el órgano/tejido, y el receptor. Si bien un porcentaje significativo de investigaciones y planes de intervención han girado en torno a la dimensión biológica del trasplante, y a la promoción de la donación; el interés por la experiencia psicosocial y la calidad de vida de los receptores en este proceso ha aumentado durante la última década. En relación con esto, la presente monografía se plantea como objetivo general la exploración de la experiencia y los significados construidos por los pacientes trasplantados, a través de una revisión sistemática de la literatura sobre esta temática. Para ello, se plantearon unos objetivos específicos derivados del general, se seleccionaron términos o palabras claves por cada uno de estos, y se realizó una búsqueda en 5 bases de datos para revistas indexadas: Ebsco Host (Academic Search; y Psychology and Behavioral Sciences Collection); Proquest; Pubmed; y Science Direct. A partir de los resultados, se establece que si bien la vivencia de los receptores ha comenzado a ser investigada, aún es necesaria una mayor exploración sobre la experiencia de estos pacientes; exploración que carecería de objetivo si no se hiciera a través de las narrativas o testimonios de los mismos receptores

Disseny d'un banc de proves per a poder mesurar les pèrdues de fregament i rodadura [sic] de pneumàtics

Dintre del projecte del cotxe de baix consum “Àliga”, vehicle experimental que participa en la “Eco-Shell Marathon”, una competició internacional que es realitza anualment, el projecte tracta del disseny d’un banc de proves per a poder mesurar les pèrdues de fregament dels pneumàtics provant diferents pressions, càrregues suportades, angles de la direcció, tipus de pneumàtics i diversos components del sistema de direcció

Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas

The objective of this research is to study the influence of several recycling cycles on the mechanical properties of four different materials made by the injection of polystyrene. The four materials studied have different characteristics. The first one is polystyrene (PS), the second one is polystyrene reinforced with hemp fibers (PSf), the third one is polystyrene reinforced with hemp fibers modified with AKD (PSft) and the last one is polystyrene reinforced with fiberglass (PSfv). With all these materials tensile strength, bending, hardness and impact is measured. After the measurement of these physical properties, materials are recycled to obtain new injection samples, and its physical properties are measured again. This process is repeated during 24 cycles. After each recycling cycle material physical properties are related with polystyrene molecular weight, melt flow, FTIR spectra and DSC. From reinforced materials, fibers are recovered and through microscopy and image analysis they are characterized to study the influence that recycling has on its structure.

Lugares de Memória da Escravatura e do Tráfico Negreiro (Angola, Cabo Verde, Guiné-Bissau, Moçambique, São Tomé e Príncipe)

Throughout the lengthy duration of this extremely violent slavery phenomenon where man's cruelty is made evident, it gave rise to places of memory: monuments, toponyms, ethnonymns, stories, legends and myths. Collective memory has constantly recycled this basic fabric. The aim of this Catalogue, dedicated to acknowledging the memory of places in the Portuguese-speaking African countries, is to identify, list, map and give information about the different sites of memory: those that can be seen and touched, without however forgetting those which have re-enacted the creative process thanks to oral tradition.

Joined-up archaeology at Old Scatness, Shetland: thin section analysis of the site and hinterland

Excavations on the multi-period settlement at Old Scatness, Shetland have uncovered a number of Iron Age structures with compacted, floor-like layers. Thin section analysis was undertaken in order to investigate and compare the characteristics of these layers. The investigation also draws on earlier analyses of the Iron Age agricultural soil around the settlement and the midden deposits that accumulated within the settlement, to create a 'joined-up' analysis which considers the way material from the settlement was used and then recycled as fertiliser for the fields. Peat was collected from the nearby uplands and was used for fuel and possibly also for flooring. It is suggested that organic-rich floors from the structures were periodically removed and the material was spread onto the fields as fertilisers. More organic-rich material may have been used selectively for fertiliser, while the less organic peat ash was allowed to accumulate in middens. Several of the structures may have functioned as byres, which suggests a prehistoric plaggen system.

A continuum receptor model of hepatic lipoprotein metabolism

A mathematical model describing the uptake of low density lipoprotein (LDL) and very low density lipoprotein (VLDL) particles by a single hepatocyte cell is formulated and solved. The model includes a description of the dynamic change in receptor density on the surface of the cell due to the binding and dissociation of the lipoprotein particles, the subsequent internalisation of bound particles, receptors and unbound receptors, the recycling of receptors to the cell surface, cholesterol dependent de novo receptor formation by the cell and the effect that particle uptake has on the cell's overall cholesterol content. The effect that blocking access to LDL receptors by VLDL, or internalisation of VLDL particles containing different amounts of apolipoprotein E (we will refer to these particles as VLDL-2 and VLDL-3) has on LDL uptake is explored. By comparison with experimental data we find that measures of cell cholesterol content are important in differentiating between the mechanisms by which VLDL is thought to inhibit LDL uptake. We extend our work to show that in the presence of both types of VLDL particle (VLDL-2 and VLDL-3), measuring relative LDL uptake does not allow differentiation between the results of blocking and internalisation of each VLDL particle to be made. Instead by considering the intracellular cholesterol content it is found that internalisation of VLDL-2 and VLDL-3 leads to the highest intracellular cholesterol concentration. A sensitivity analysis of the model reveals that binding, unbinding and internalisation rates, the fraction of receptors recycled and the rate at which the cholesterol dependent free receptors are created by the cell have important implications for the overall uptake dynamics of either VLDL or LDL particles and subsequent intracellular cholesterol concentration. (C) 2008 Elsevier Ltd. All rights reserved.