Summary of research on "Parlons français." First-year program.

Includes bibliography.

Trees, prairies, and people : a history of tree planting in the Plains States /

Bicentennial project of the Texas Woman's University and Forest Service, U. S. Dept. of Agriculture."

European Elites and the Idea of Europe after the End of Empire /

A study of the genesis of ‘European civilisation’ as a concept of 20th-C EU political practice & as a specific project of a transnational network of EU elites, examining how they sought to rehabilitate EU identity as a response to a crisis of belonging following the 1917-1920 revolutions & the collapse of the Hohenzollern, Habsburg & RU Empires.

Geomorphic Impacts of the 2013 Colorado Front Range Flood on Black Canyon Creek and North Fork Big Thompson River

In September 2013, the Colorado Front Range experienced a five-day storm that brought record-breaking precipitation to the region. As a consequence, many Front Range streams experienced flooding, leading to erosion, debris flows, bank failures and channel incision. I compare the effects that debris flows and flooding have on the channel bar frequency, frequency and location of wood accumulation, and on the shape and size of the channel along two flood impacted reaches located near Estes Park and Glen Haven, Colorado within Rocky Mountain National Park and Arapaho-Roosevelt National Forest: Black Canyon Creek (BCC) and North Fork Big Thompson River (NFBT). The primary difference between the two study areas is that BCC was inundated by multiple debris flows, whereas NFBT only experienced flooding. Fieldwork consisted of recording location and size of large wood and channel bars and surveying reaches to produce cross-sections. Additional observations were made on bank failures in NFBT and the presence of boulders in channel bars in BCC to determine sediment source. The debris flow acted to scour and incise BCC causing long-term alteration. The post-flood channel cross-sectional area is as much as 7 to 23 times larger than the pre-flood channel, caused by the erosion of the channel bed to bedrock and the elimination of riparian vegetation. Large wood was forced out of the stream channel and deposited outside of the bankfull channel. Flooding in NFBT caused bank erosion and widening that contributed sediment to channel bars, but accomplished little stream-bed scour. As a result, there was relatively little damage to mid-channel and riparian vegetation, and most large wood remained within the wetted channel.

Ablative Pyrolysis of Beetle-killed Trees

Thesis (Ph.D.)--University of Washington, 2016-06

The Thelastomatoidea (Nematoda : Oxyurida) of two sympatric Panesthiinae (Insecta : Blattodea) from southeastern Queensland, Australia: taxonomy, species richness and host specificity

The thelastomatoid fauna of two species of wood-burrowing cockroach (Blattodea, Blaberidae), Panesthia cribrata and Panesthia tryoni tryoni, from Lamington National Park, Australia, is described. The following eight new species and three new genera of thelastomatid are proposed: Bilobostoma exerovulva n. g., n. sp.; Cordonicola gibsoni n. sp.; Coronostoma australiae n. sp.; Desmicola ornata n. sp.; Hammerschmidtiella hochi n. sp.; Malaspinanema goateri n. g., n. sp.; Travassosinema jaidenae n. sp.; and Tsuganema cribratum n. g., n. sp. Additional data are given for Blattophila sphaerolaima and Leidynemella fusiformis. Of the 11 species reported, nine were found in P. cribrata and ten in P. tryoni tryoni. Such levels of thelastomatoid species richnessness in single host species are exceptional. Only the mole cricket, Gryllotalpa africana (23), and the domestic cockroach, Periplaneta americana (20), have higher reported richness. Three species, T jaidenae, C. australiae and D. ornata, were found either exclusively or significantly more prevalently in P tryoni tryoni than in R cribrata. Species of Travassosinema, Coronostoma and Desmicola have been found previously only in millipedes (Diplopoda), a fact that suggests that there is a greater degree of niche overlap between R tryoni tryoni and millipedes than for R cribrata.

Dimensional change behavior of caribbean pine using an environmental scanning electron microscope

Moisture transport and dimensional change during wood drying or wetting processes were analyzed based on pictures from an environmental scanning electron microscope (ESEM). This provides quantitative relationships between dimensional changes of total area, cell wall, and lumen, and moisture content for earlywood and latewood. Earlywood and latewood behave similarly but show some quantitative differences. The overall outcome for sections containing both kinds of wood seems to be dominated by the latewood behavior. The observed strain behavior of wood during drying is anisotropic in ways that are inconsistent with explanations solely related to microfibril orientation or earlywood/latewood interactions and more likely may be influenced by ray tracheids.

Journey to work:exploring difficulties, solutions and the impact of aging

A study was conducted in the UK, as part of the New Dynamics of Ageing Working Late project, of the journey to work among 1215 older workers (age groups 45-49, 50-55, 56-60 and 60 + ). The aim was to identify problems or concerns that they might have with their commute, strategies that have been adopted to address them, and the role that employers can play to assist them. Follow-up interviews with 36 employees identified many strategies for assisting with the problems of journeys to work, ranging from car share and using public transport to flexible working and working some days from home. Further interviews with a sample of 12 mainly larger companies showed that employers feel a responsibility for their workers’ commute, with some offering schemes to assist them, such as adjusting work shift timings to facilitate easier parking. The research suggests that the journey to work presents difficulties for a significant minority of those aged over 45, including issues with cost, stress, health, fatigue and journey time. It may be possible to reduce the impact of these difficulties on employee decisions to change jobs or retire by assisting them to adopt mitigating strategies. It does not appear that the likelihood of experiencing a problem with the journey to work increases as the employee approaches retirement; therefore, any mitigating strategy is likely to help employees of all ages. These strategies have been disseminated to a wider audience through an online resource at www.workinglate.org.

Students interviewing students: the Aston-Hong Kong Project

This article provides an account of undergraduate sociology students conducting indepth interviews with international students from Hong Kong. The research is locating in a broader project of identifying rationales for the recruitment of international students. One of the shortcomings of previous research was that the student voice and rationale were missing. We have addressed this by involving undergraduate researchers in the collection and analysis of data. This project report draws on one of the reflections of the student researcher.

Kinetic study on thermal decomposition of woods in oxidative environment

The purpose of this work is to gain knowledge on kinetics of biomass decomposition under oxidative atmospheres, mainly examining effect of heating rate on different biomass species. Two sets of experiments are carried out: the first set of experiments is thermal decomposition of four different wood particles, namely aspens, birch, oak and pine under an oxidative atmosphere and analysis with TGA; and the second set is to use large size samples of wood under different heat fluxes in a purpose-built furnace, where the temperature distribution, mass loss and ignition characteristics are recorded and analyzed by a data post-processing system. The experimental data is then used to develop a two-step reactions kinetic scheme with low and high temperature regions while the activation energy for the reactions of the species under different heating rates is calculated. It is found that the activation energy of the second stage reaction for the species with similar constituent fractions tends to converge to a similar value under the high heating rate.

Effect of sample preparation on the thermal degradation of metal-added biomass

The present study investigates the effect of different sample preparation methods on the pyrolysis behaviour of metal-added biomass; Willow samples were compared in the presence of two salts of zinc and lead containing sulphate and nitrate anions which were added to the wood samples with three different techniques as dry-mixing, impregnation and ion-exchange. The effect of acid and water wash as common demineralisation pre-treatments were also analysed to evaluate their roles in the thermal degradation of the biomass. Results from thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and pyrolysis-mass spectrometry (Py-MS) measurements indicated that these pre-treatments change the matrix and the physical-chemical properties of wood. Results suggested that these structural changes increase the thermal stability of cellulose during pyrolysis. Sample preparation was also found to be a crucial factor during pyrolysis; different anions of metal salts changed the weight loss rate curves of wood material, which indicates changes in the primary degradation process of the biomass. Results also showed that dry-mixing, impregnation or ion-exchange influence the thermal behaviour of wood in different ways when a chosen metal salt was and added to the wood material. © 2011 Elsevier B.V. All rights reserved.

Numerical Comparison of the Drag Models of Granular Flows Applied to the Fast Pyrolysis of Biomass

The paper presents a comparison between the different drag models for granular flows developed in the literature and the effect of each one of them on the fast pyrolysis of wood. The process takes place on an 100 g/h lab scale bubbling fluidized bed reactor located at Aston University. FLUENT 6.3 is used as the modeling framework of the fluidized bed hydrodynamics, while the fast pyrolysis of the discrete wood particles is incorporated as an external user defined function (UDF) hooked to FLUENT’s main code structure. Three different drag models for granular flows are compared, namely the Gidaspow, Syamlal O’Brien, and Wen-Yu, already incorporated in FLUENT’s main code, and their impact on particle trajectory, heat transfer, degradation rate, product yields, and char residence time is quantified. The Eulerian approach is used to model the bubbling behavior of the sand, which is treated as a continuum. Biomass reaction kinetics is modeled according to the literature using a two-stage, semiglobal model that takes into account secondary reactions.

Gasification of rubberwood in a downdraft gasifier

The objectives of this research were to investigate the perforamnce of a rubberwood gasifier and engine with electricity generation and to identify opportunities for the implementation of such a system in Malaysia. The experimental work included the design, fabrication and commissioning of a throated downdraft gasifier in Malaysia. The gasifier was subsequently used to investigate the effect of moisture content, dry wood capacity and particle size of rubberwood on gasifier performance. Additional experiments were also conducted to investigate the influence of two different nozzle numbers and two different throat diameters on tar cracking. A total of 101 runs were completed during the duration of the research. From the experimental data, the average mass balance was found to be 92.65%. The average energy balance over the gasifier to hot raw gas was 98.7%, to cold clean gas was 102.4% and over the complete system was 101.9%. The heat loss from the gasifier was estimated to range from 10-26% of the chemical energy of the feedstock. From the downstream operation, the heat loss was estimated to range from 17-37% of the chemical energy of rubberwood feedstock. The maximum throughput for stable operation was found to be 60-70% of the maximum dry wood capacity. The gasifier was found to have a maximum turndown ratio of 5:1. It is also postulated that the phenomenon of turndown of the gasifier is due to a `bubble theory' occurring at the gasification zone, and this hypothesis is explained. For stable power output, the working range of the engine was found to be 5-33.5 kWe. The thermal efficiency and diesel displacement of the engine was found to be 17-18% and 65-70% respectively. The research also showed that rubberwood gasification in Malaysia is feasible if the price of diesel is above MR35/l and the price of wood is below MR120/tonne.

The Legitimation of authority in the European Union

The founding Treaties of the European Union (EU) provide the Commission with bureaucratic structures and functions, and the authority to take a political leadership role in the integration process. However, the legitimacy of the Commission's authority to act either as a bureaucracy or as a political institution is periodically contested, as is the authority and leadership of its President. Max Weber's theory of the legitimation of authority suggests itself in this context as a working tool for assessing the nature of institutional and individual authority and leadership in the Commission and the broader EU context. Weber's typology of authority offers both an understanding of the changes in the Commission's fortunes within the 'would-be polity' of the European institutions, and an appraisal of claims to authority at the individual level by the Commission President. When applied to two contrasting moments in the Commission's life during the presidency of Jacques Delors (the generating of the White Papers of 1985 and 1993), Weber's typology provides an explanation for the evolution of the legitimation of these forms of authority in terms of, first, the Union's imperfect provisions for legitimate claims to leadership authority on 'charismatic' grounds and, second, the absence in the Union of resources for leadership legitimacy based on 'traditional'-type authority, such as explicit, popular, or party political European-wide support for the project of European union. These are resources which, if present in the EU, would legitimise calls to reform the EU's institutions in the direction of more integration and a more federal polity. The case studies offer an appraisal of the functioning and malfunctioning of authority within the Union, as well as a critical assessment of the applicability of the Weberian model to the legitimation of authority in the EU.