Conservação de goiabas ‘Pedro Sato’ minimamente processadas e irradiadas

The aim of this study was to evaluate the effect of gamma irradiation associated with modified atmosphere in cold storage of guava ‘Pedro Sato’ minimally processed, checking their physical-chemical characteristics. Were used guavas from the region of Vista Alegre do Alto/São Paulo/Brazil. After harvest, fruits were immediately transported to the Fruit and Vegetables Laboratory from the Agroindustrial Management and Technology Department, Agronomic Sciences College - UNESP - Botucatu / SP, where they were kept at 10 ° C and 90-95% RH in cold storage, for 12 days. In the laboratory, fruits were selected by size and lack of defects in order to standardize the lot and then were cut into slices 0.5 cm thick. We used the completely randomized design, with factorial design 5 x 5, with three replications. The first factor consisted of the following effects: control 1 (without package or irradiation), control 2 (polystyrene package/PS + package low density polyethylene/LDPE and without irradiation), treatment 1 (PS + LDPE and 0.2 kGy ), treatment 2 (PS + LDPE and 0.6 kGy) and treatment 3 (PS + LDPE and 1.0 kGy). The second factor consisted of the evaluation periods: 0, 3, 6, 9 and 12 days. The analyses were: firmness, soluble solids (SS), titratable acidity (TA), maturity index, pH, breathing behavior. In the end of this work it was concluded that the lower dose of radiation associated with modified atmosphere promoted positive effect on physical-chemical characteristics of guava ‘Pedro Sato’, providing fruits with higher quality and durability, due to higher maintenance of pulp firmness, the highest pH and soluble solids obtained. Regarding the storage days, there were no beneficial effect of the treatments during storage, mainly due to the sensitivity of fruits submitted to gamma irradiation, where only the early days provided better values for the variables.

Fisiologia e bioquímica do tomateiro submetido à irrigação salina parcial do sistema radicular

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Avaliação do hidróxido de cálcio associado à própole com agitação ultrassônica como curativo intracanal em reimplante dentário tardio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fibra, metabolismo ácido-básico e balanço de macroelementos em gatos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Remoção de elementos potencialmente tóxicos em resíduo sólido da indústria canavieira para utilização como condicionador de solo na agricultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da combinação de antibióticos e sinvastatina sobre microrganismos de interesse endodôntico e na expressão de marcadores odontoblásticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da espessura do substrato dental sobre a eficácia clareadora e citotoxicidade de diferentes protocolos de clareamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da sanitização e do armazenamento nos compostos bioativos de manga 'palmer' in natura e processada

Pós-graduação em Agronomia (Horticultura) - FCA

Influência da sanitização e do armazenamento nos compostos bioativos de manga 'palmer' in natura e processada

Pós-graduação em Agronomia (Horticultura) - FCA

Escrubagem da bauxita de Paragominas - PA. Parte 1: influência de variáveis operacionais na desagregação da bauxita

The aim of this study was to investigate the bauxite scrubbing process on samples from Miltonia 3, a Vale operation in the State of Para, Brazil. The experimental program included the design of a standard laboratory test, from which parameters were derived for predicting the operation of a scrubber in steady state conditions. Three main variables were selected for the laboratory experimental program using the factorial design technique. These were load fraction, residence time and rotation speed. The amount of fines was determined through screening both the feed and the product of the scrubbing test. The former was considered to be a characteristic material, while the second was the dependent variable, i.e. the result of the scrubbing process. According to experiments, the load fraction was the most important variable for the scrubbing process.

Terapia pulpar em dentes decíduos: possibilidades terapêuticas baseadas em evidências

Introduction: Pulpotomy of primary teeth has been the treatment of choice in cases of inflammation of the coronal pulp caused by caries or trauma with no involvement of the radicular pulp, thus avoiding the premature loss of the teeth. Not only is the diagnosis of the inflamed dental pulp required for this therapy to succeed, but also the selection of an effective and biocompatible medicament. However, none of the drugs available and recommended for pulpotomy therapy present all the requirements of an ideal pulp capping agent. Objective: Through a systematic literature review, between the years of 2000 and 2011, focusing in randomized clinical trials, systematic reviews and meta-analysis, aiming to analyze and discuss based on alternatives for the treatment of pulpotomy in human deciduous teeth. Conclusion: Scientific evidences showed that the medicaments and techniques influence were few. Thus, further and well-designed studies are suggested for clarification. The information generated in such experiments may contribute to a better understanding of the mechanisms of pulp therapy to new therapeutic approaches aimed at improving pulp therapy in deciduous teeth.

CCL3 and CXCL12 production in vitro by dental pulp fibroblasts from permanent and deciduous teeth stimulated by Porphyromonas gingivalis LPS

Objective: The aim of this study was to compare the production of the chemokines CCL3 and CXCL12 by cultured dental pulp fibroblasts from permanent (PDPF) and deciduous (DDPF) teeth under stimulation by Porphyromonas gingivalis LPS (PgLPS). Material and Methods: Primary culture of fibroblasts from permanent (n=3) and deciduous (n=2) teeth were established using an explant technique. After the fourth passage, fibroblasts were stimulated by increasing concentrations of PgLPS (0 – 10 µg/mL) at 1, 6 and 24 h. The cells were tested for viability through MTT assay, and production of the chemokines CCL3 and CXCL12 was determined through ELISA. Comparisons among samples were performed using One-way ANOVA for MTT assay and Two-way ANOVA for ELISA results. Results: Cell viability was not affected by the antigen after 24 h of stimulation. PgLPS induced the production of CCL3 by dental pulp fibroblasts at similar levels for both permanent and deciduous pulp fibroblasts. Production of CXCL12, however, was significantly higher for PDPF than DDPF at 1 and 6 h. PgLPS, in turn, downregulated the production of CXCL12 by PDPF but not by DDPF. Conclusion: These data suggest that dental pulp fibroblasts from permanent and deciduous teeth may present a differential behavior under PgLPS stimulation.

Physical and chemical characterization of the pulp of different varieties of avocado targeting oil extraction potential

The aim of this study was to evaluate the physicochemical properties of avocado pulp of four different varieties (Avocado, Guatemala, Dickinson, and Butter pear) and to identify which has the greatest potential for oil extraction. Fresh avocado pulp was characterized by moisture, protein, fat, ash, carbohydrates and energy contents were determined. The carotenoids and chlorophyll contents were determined by the organic solvent extraction method. The results showed significant differences in the composition of the fruit when varieties are compared. However, the striking feature in all varieties is high lipid content; Avocado and Dickinson are the most suitable varieties for oil extraction, taking into account moisture content and the levels of lipids in the pulp. Moreover, it could be said that the variety Dickinson is the most affected by the parameters evaluated in terms of overall quality. Chlorophyll and carotenoids, fat-soluble pigments, showed a negative correlation with respect to lipids since it could be related to its function in the fruit. The varieties Avocado and Dickinson are an alternative to oil extraction having great commercial potential to be exploited thus avoiding waste and increasing farmers income.

Efeito de revestimentos comestíveis na conservação de mamões minimamente processados

Avaliou-se o efeito de revestimentos à base de carboidratos nas características microbiológicas, físicas, físico-químicas e sensoriais de mamão Formosa minimamente processado (MP), armazenado sob refrigeração. Após tratamento com cloreto de cálcio, os frutos descascados e cortados foram imersos em soluções de amido de arroz (AA) 3%; alginato de sódio (AS) 0,5%; carboximetilcelulose (CMC) 0,25%, e armazenados a 5 ºC e 90% de UR. Os produtos foram avaliados nos dias 1, 3, 6, 9, 12 e 15. O uso de revestimentos à base de AA, AS e CMC em mamões MP resultou em menor contagem de coliformes totais que o controle. Mamões revestidos com AA e CMC apresentaram redução e aumento do processo respiratório, respectivamente. Os frutos revestidos apresentaram menores teores de sólidos solúveis e seus valores de pH se tornaram menores após o 9º dia de armazenamento. O uso da CMC como revestimento proporcionou, no 15º dia, maior firmeza da polpa. As variações nos parâmetros de cor (Luminosidade, Hue e Croma) não comprometeram a qualidade sensorial do mamão MP. Os atributos sensoriais dos mamões com revestimentos não diferiram do controle durante os 15 dias de estudo. Como a maioria dos efeitos positivos das coberturas ocorreu aos 12º e 15º dias e, considerando-se o custo da tecnologia e o preço dos revestimentos, a melhor opção, até 9 dias de armazenamento, consiste em apenas sanitizar os frutos, como feito no controle. Se o interesse for preservar a vida útil por um período maior, até 15 dias, os revestimentos utilizados podem ter resultados satisfatórios, desde que respeitadas as condições de estocagem utilizadas no estudo.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.