Ecology and conservation of the jacutinga Pipile jacutinga in the Atlantic Forest of Brazil

The jacutinga Pipile jacutinga was formerly one of the most abundant game bird cracids in the Atlantic forest of Brazil. Nowadays this species is vulnerable to extinction due to hunting and habitat loss. The ecology of the jacutinga was studied at Parque Estadual Intervales, Sao Paulo, Brazil from October 1993 to December 1995 and in adjacent areas. Jacutingas were observed to feed mainly on the sugar-rich fruit of 41 species. We recorded a low index of abundance for the jacutinga (0.018) or c.1.7 birds/km2 at Intervales, one of the best protected areas within their range. Surveys carried out in the Atlantic forest of Sao Paulo found jacutinga populations in 14 localities. Probably < 1500 birds survive in the best protected areas. The species' stronghold in southeastern Brazil is in the mountains of Serra de Paranapiacaba, an area protected by several parks suffering from hunting and palm heart harvesting and threatened by a hydroelectric project.

Frugivory in cotingas of the Atlantic Forest of southeast Brazil

In this paper we present a list of plant species whose fruits are eaten by eight cotinga species (Carpornis cucullatus, C. melanocephalus, Laniisoma elegans, Lipaugus lanioides, Oxyruncus cristatus, Phibalura flavirostris, Procnias nudicollis, and Pyroderus scutatus) at Parque Estadual Intervales (PEI), an Atlantic Forest reserve in southeast Brazil. Besides providing a list of fruits eaten by cotingas, our goal is to allow insights into fruit use by these birds whose ecology is poorly known. From 1990 to 2001 four sites located within PEI were regularly visited. These sites form an altitudinal gradient (70-800 m a.s.l.) and also a gradient of forest disturbance (second-growth to old-growth vegetation). Feeding records were made along several trails and dirt roads that crossed the study sites. Cotingas ate a variety of fruits (99 species in 34 families) that ranged from small (< 5 mm diameter) to large (up to 37 mm) and included some non-ornithochorous ones. With the exception of P. nudicollis, cotingas exploited not only fruits typical of the forest interior but also fruits of secondary vegetation, suggesting that concerning fruit exploitation early successional vegetation does not represent a barrier for the survival of these cotingas.

Inter and intraspecific variation on reproductive phenology of the Brazilian Atlantic forest Rubiaceae: Ecology and phylogenetic constraints

The reproductive phenology of seven species of Rubiaceae from the Brazilian Atlantic rain forest was compared to evaluate the occurrence of phylogenetic constraints on flowering and fruiting phenologies. Since phenological patterns can be affected by phylogenetic constraints, we expected that reproductive phenology would be similar among plants within a family or genus, occurring during the same time (or season) of the year. Observations on flowering and fruiting phenology were carried out monthly, from December 1996 to January 1998, at Núcleo Picinguaba, Parque Estadual da Serra do Mar, Ubatuba, São Paulo State, Brazil. Nine phenological variables were calculated to characterize, quantify and compare the reproductive phenology of the Rubiaceae species. The flowering patterns were different among the seven species studied, and the Kruskal-Wallis test indicated significant differences in flowering duration, first flowering, peak flowering and flowering synchrony. The peaks and patterns of fruiting intensity were different among the Rubiaceae species studied and they differed significantly from conspecifics in the phenological variables fruiting duration, fruiting peak date, and fruiting synchrony (Kruskal-Wallis test). Therefore, we found no evidence supporting the phylogenetic hypotheses, and climate does not seem to constrain flowering and fruiting patterns of the Rubiaceae species in the understory of the Atlantic forest.

Relationship between Constrictotermes cyphergaster and Inquiline Termites in the Cerrado (Isoptera: Termitidae)

Constrictotermes cyphergaster builds arboreal nests in Cerrado sensu stricto of Brazil; inquiline termites and termitophiles frequently inhabit their nests. Measurements of the nests and the support trees (nest width and diameter; tree trunk circumference and inclination), colony size of C. cyphergaster and of Inquilinitermes and number of termitophiles were studied at the Parque Estadual da Serra de Caldas Novas. These variables were subjected to a Principal Component Analysis, producing four principal components. The first principal component refers to a multidimensional axis of nest size, encompassing variables related to nest and colony size, such as abundance per caste of C. cyphergaster and I. microcerus, number of termitophile species and the measurements of the nest. The number of soldiers and workers of C. cyphergaster and soldiers of Inquilinitermes increased proportionally to the axis of nest size, while the number of Inquilinitermes workers increased more quickly then the increase in the nest size. Both Inquilinitermes occurred mainly in larger nests. Almost half of the nests (47,5%) were inhabited by I. microcerus and 10% by I. fur.

Análise dos parâmetros morfométricos da bacia do Rio Preto, Serra do Espinhaço (Minas Gerais, Brasil)

The Rio Preto Hydrographic Basin (RPHB) is located in the North-central portion of the state of Minas Gerais, Brazil, 30 km ENE of the city of Diamantina. The sources of the stream of that name are found in the Rio Preto State Park, which has an area of 10,755 hectares. The total area, perimeter, extension, and axial length of the RPHB, as well as other morphometric characteristics, with emphasis on shape indexes, were obtained with the help of the ArcGis 9.2 program. The cartographic data were taken from digitalized topographic charts in a scale of 1:100,000 of the Brazilian Geographical Institute (IBGE). The measured drainage area is of 389.3 km2 and the perimeter is 136.9 km. Due to structural influence, the shape of the RPHB is irrgular and elongated, with drainage developed in a dendritic and parallel pattern. Those characteristics were checked by means of the compaxity coefficient and the shape factor. The first one was estimated in 1.94, what implies that the basin is not subject to fast flooding in years with normal precipitation. The high degree of fluvial downcutting of the basin is confirmed by the fact that it is a 5th order basin, it presents a significant branching rate and a medium drainage density.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

Bonding all-ceramic restorations with two resins cement techniques: A clinical report of three-year follow-up

Ceramics have been widely used for esthetic and functional improvements. The resin cement is the material of choice for bonding ceramics to dental substrate and it can also dictate the final esthetic appearance and strength of the restoration. The correct use of the wide spectrum of resin luting agents available depends on the dental tooth substrate. This article presents three-year clinical results of a 41 years old female patient B.H.C complaining about her unattractive smile. Two all-ceramic crowns and two laminates veneers were placed in the maxillary incisors and cemented with a self-adhesive resin luting cement and conventional resin luting cement, respectively. After a three-year follow-up, the restorations and cement/teeth interface were clinically perfect with no chipping, fractures or discoloration. Proper use of different resin luting cements shows clinical appropriate behavior after a three-year follow-up. Self-adhesive resin luting cement may be used for cementing all-ceramic crowns with high predictability of success, mainly if there is a large dentin surface available for bonding and no enamel at the finish line. Otherwise, conventional resin luting agent should be used for achieving an adequate bonding strength to enamel.

Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Prosthetic approaches for immediate implants in esthetic areas: Aliterature review and clinical cases

The placement of implants in fresh extraction sockets followed for provisionalization allows soft tissues preservation and alveolar ridge, however for this some requisites are necessary. This article describe the factors involved in immediate implants and the prosthetic approachs for this type of therapy. Addtionaly two clinicals case were presented showing diferents approachs for in prosthetic stage for maintenance the aesthetic aperance of soft tissues of the immediate implants.

Mechanical Property Assessment of Bone Healing around a Titanium-Zirconium Alloy Dental Implant

Background: It has been reported that titanium-zirconium alloy with 13-17% zirconium (TiZr1317) implants show higher biomechanical stability and bone area percentage relative to commercially pure titanium (cpTi) grade 4 fixtures. Purpose: This study aimed to determine whether the higher stability for TiZr1317 implants is associated with higher mechanical properties of remodeling bone in the areas around the implants. Materials and Methods: This study utilized 36 implants (n=18: TiZr1317, n=18: cpTi), which were placed in the healed ridges of the mandibular premolar and first molar of 12 mini pigs (n=3 implants/animal). After 4 weeks in vivo, the samples were retrieved, and resin-embedded histologic sections of approximately 100μm in thickness were prepared. In order to determine the nanomechanical properties, nanoindentation (n=30 tests/specimen) was performed on the bone tissue of the sections under wet conditions with maximum load of 300μN (loading rate: 60μN/s). Results: The mean (±standard deviation) elastic modulus (E) and hardness (H) for the TiZr1317 group were 2.73±0.50GPa and 0.116±0.017GPa, respectively. For the cpTi group, values were 2.68±0.51GPa and 0.110±0.017GPa for E and H, respectively. Although slightly higher mechanical properties values were observed for the TiZr1317 implants relative to the cpTi for both elastic modulus and hardness, these differences were not significant (E=p>0.75; H=p>0.59). Conclusions: The titanium-zirconium alloy used in this study presented similar degrees of nanomechanical properties to that of the cpTi implants. © 2013 Wiley Periodicals, Inc.

Pollination ecology of the Cerrado species Eschweilera nana (Lecythidaceae subfam. Lecythidoideae)

Eschweilera nana is pollinated by a guild of pollinators consisting of mostly bees. Effective pollinators are large bees able to force their way into the closed androecium to access nectar. The morphology of the flowers diminishes self pollination and promotes cross-pollination. Although many pollinators make diurnal visits to the flowers, fruit set was very low in comparison with the number of flowers produced. Breeding system tests yielded only two fruits, one produced by xenogamy and another one in the control test. The results of this study are consistent with studies of other Cerrado plants pollinated by guilds of insects and support the conclusion of other pollination studies of Lecythidaceae that fruit set is low in comparison with the high numbers of flowers produced. © 2013 The New York Botanical Garden.

Teste de submersão em água para avaliação do vigor de sementes de milho

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação da qualidade de efluentes na criação de rã-touro (Lithobates catesbeianus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Validade e aplicabilidade do questionário internacional de atividade física aplicado via e-mail em adultos

Pós-graduação em Ciências da Motricidade - IBRC

Processos ecológicos e filogenéticos na estruturação de comunidades de girinos

Pós-graduação em Biologia Animal - IBILCE