Alcohol and other drug use disorders among older-aged people

In Australia people aged 65 years or older currently comprise 12.1% of the population. This has been estimated to rise to 24.2% by 2051. Until recently there has been relatively little research on alcohol and other drug use disorders among these individuals but, given the ageing population, this issue is likely to become of increasing importance and prominence. Epidemiological research shows a strong age-related decline in the prevalence of alcohol and other drug use disorders with age. Possible reasons for this include: age-related declines in the use and misuse of alcohol and other drugs; increased mortality among those with a lifetime history of alcohol and other drug use disorders; historical differences in exposure to and use of alcohol and other drugs. Despite the age-related decline in the prevalence of these disorders, they do still occur among those aged 65 years or older and, given historical changes in exposure to and use of illicit drugs, it likely that the prevalence of these disorders among older-aged individuals will rise. Specific issues faced by older-aged individuals with alcohol and other drug use problems are discussed. These include: interactions with prescribed medications, under-recognition and treatment of alcohol and drug problems, unintentional injury and social isolation. Finally, a brief discussion of treatment issues is provided.

Low input tillage/cropping systems for limited resource areas

Agriculture in limited resource areas is characterized by small farms which an generally too small to adequately support the needs of an average farm family. The farming operation can be described as a low input cropping system with the main energy source being manual labor, draught animals and in some areas hand tractors. These farming systems are the most important contributor to the national economy of many developing countries. The role of tillage is similar in dryland agricultural systems in both the high input (HICS) and low input cropping systems (LICS), however, wet cultivation or puddling is unique to lowland rice-based systems in low input cropping systems. Evidence suggest that tillage may result in marginal increases in crop yield in the short term, however, in the longer term it may be neutral or give rise to yield decreases associated with soil structural degradation. On marginal soils, tillage may be required to prepare suitable seedbeds or to release adequate Nitrogen through mineralization, but in the longer term, however, tillage reduces soil organic matter content, increases soil erodibility and the emission of greenhouse gases. Tillage in low input cropping systems involves a very large proportion of the population and any changes: in current practices such as increased mechanization will have a large social impact such as increased unemployment and increasing feminization of poverty, as mechanization may actually reduce jobs for women. Rapid mechanization is likely to result in failures, but slower change, accompanied by measures to provide alternative rural employment, might be beneficial. Agriculture in limited resource areas must produce the food and fiber needs of their community, and its future depends on the development of sustainable tillage/cropping systems that are suitable for the soil and climatic conditions. These should be based on sound biophysical principles and meet the needs of and he acceptable to the farming communities. Some of the principle requirements for a sustainable system includes the maintenance of soil health, an increase in the rain water use efficiency of the system, increased use of fertilizer and the prevention of erosion. The maintenance of crop residues on the surface is paramount for meeting these requirements, and the competing use of crop residues must be met from other sources. These requirements can be met within a zonal tillage system combined with suitable agroforestry, which will reduce the need for crop residues. It is, however, essential that farmers participate in the development of any new technologies to ensure adoption of the new system. (C) 2001 Elsevier Science B.V. All rights reserved.

Stereological and other methods applied to rock joint size estimation - Does Crofton's theorem apply?

A number of authors concerned with the analysis of rock jointing have used the idea that the joint areal or diametral distribution can be linked to the trace length distribution through a theorem attributed to Crofton. This brief paper seeks to demonstrate why Crofton's theorem need not be used to link moments of the trace length distribution captured by scan line or areal mapping to the moments of the diametral distribution of joints represented as disks and that it is incorrect to do so. The valid relationships for areal or scan line mapping between all the moments of the trace length distribution and those of the joint size distribution for joints modeled as disks are recalled and compared with those that might be applied were Crofton's theorem assumed to apply. For areal mapping, the relationship is fortuitously correct but incorrect for scan line mapping.

Laws of nature and laws of ecology

We address the question of whether there are laws in ecology. Although there has been a great deal of recent interest in this topic, much of the relevant debate has been conducted under some common misconceptions about what laws of nature are. Once these misconceptions are cleared up, the case for ecology having laws is much stronger. Indeed, we suggest that the case for laws in ecology is no better or worse than the case for laws in physics.

Lectures and other types of teaching

A questionnaire on lectures was completed by 351 students (84% response) and 35 staff (76% response) from all five years of the veterinary course at the University of Queensland. Staff and students in all five years offered limited support for a reduction in the number of lectures in the course and the majority supported a reduction in the number of lectures in the clinical years. Students in the clinical years only and appropriate staff agreed that the number of lectures in fifth year should be reduced but were divided as to whether lectures in fifth year should be abolished. There was limited support for replacement of some lectures by computer assisted learning (CAL) programs, but strong support for replacement of some lectures by subject-based problem based learning (PBL) and strong support for more self-directed learning by students. Staff and students strongly supported the inclusion of more clinical problem solving in lectures in the clinical years and wanted these lectures to be more interactive. There was little support for lectures in the clinical years to be of the same type as in the preclinical years.

Synthesis of optically complex core-shell colloidal suspensions: Pathways to multiplexed biological screening

The ability to generate enormous random libraries of DNA probes via split-and-mix synthesis on solid supports is an important biotechnological application of colloids that has not been fully utilized to date. To discriminate between colloid-based DNA probes each colloidal particle must be 'encoded' so it is distinguishable from all other particles. To this end, we have used novel particle synthesis strategies to produce large numbers of optically encoded particle suitable for DNA library synthesis. Multifluorescent particles with unique and reproducible optical signatures (i.e., fluorescence and light-scattering attributes) suitable for high-throughput flow cytometry have been produced. In the spectroscopic study presented here, we investigated the optical characteristics of multi-fluorescent particles that were synthesized by coating silica 'core' particles with up to six different fluorescent dye shells alternated with non-fluorescent silica 'spacer' shells. It was observed that the diameter of the particles increased by up to 20% as a result of the addition of twelve concentric shells and that there was a significant reduction in fluorescence emission intensities from inner shells as an increasing number of shells were deposited.

New structure formation on gamma-irradiation of poly(chlorotrifluoroethylene)

The radiation chemistry of PCTFE at different temperatures has been studied. The polymer was irradiated under vacuum to absorbed doses of up to 1500 kGy. Three irradiation temperatures were chosen. These included ambient temperature, a temperature well above the T, and a temperature above the crystalline melting temperature. These were 298, 423 and 493 K, respectively. The formation of new structures was identified by solid-state FTIR and F-19 NMR. No branching was observed below the melting temperature, but branches were observed above the melting temperature. G-values for chain-end formation were 1.5 and 2.4 at room temperature and 423 K, respectively and the G-value for the formation of double bonds was found to be < 0.1. For the irradiations at 493 K, the G-values for the formation of chain ends, double bonds and branching points were 3.6, 0.2 and 0.5, respectively. The presence of long-chain branches within the polymer structure could not be proven for radiolysis at 493 K, but scission predominates and network formation does not occur upon irradiation. DSC studies of the polymers irradiated at ambient temperature were consistent with chain scission leading to an increase in the percentage crystallinity, as observed for other fluoropolymers. (C) 2003 Elsevier Science Ltd. All rights reserved.

Magnetic polarization currents in double quantum dot devices

We investigate coherent electron transport through a parallel circuit of two quantum dots (QDs), each of which has a single tunable. energy level. Electrons tunnelling via each dot from the left lead interfere with each other at the right lead. It is shown that due to the quantum interference of tunnelling electrons the double QD device is magnetically polarized by coherent circulation of electrons on the closed path through the dots and the leads. By varying the energy level of each dot one can make the magnetic states of the device be up-, non- or down-polarized. It is shown that for experimentally accessible temperatures and applied biases the magnetic polarization currents Should be sufficiently large to observe with current nanotechnology.

In search of the ultimate ionosonde deduced equator

A further progress has been made in defining the ionosonde deduced equator (IDE) which characterises a latitudinal transition from the northern to southern hemisphere. It is now possible to define the global IDE location as the locus of the average position between geographic and geomagnetic equators. A more complete insight to the phenomenon of the third equator (i.e. after geographic and geomagnetic equators) was made possible due to availability of ionospheric height (h'F) data from three stations positioned close to the IDE in the American and the far-east sectors. The IDE ionospheric signature (or E-type signature), detected at these stations, consists of bi-annual h'F height increases. This signature however is not consistently observed during solar cycle and at times, particularly at sunspot minimum, a weak hemispheric signature is observed (i.e. the northern or southern hemisphere signature). In general, the height increase at the IDE are considerably smaller (by a factor of 4) than at other equatorial locations, indicating that the ionosphere at the IDE location becomes less disturbed. It is suggested that the equatorial longitudinal regions which can be associated with more consistent E-type signature are located in the central Pacific and at the east coast of America, close to the intersection points of the geographic and geomagnetic equators. (C) 2003 Elsevier Ltd. All rights reserved.

Method for determining the shear stress in cylindrical systems

We develop a method for determining the elements of the pressure tensor at a radius r in a cylindrically symmetric system, analogous to the so-called method of planes used in planar systems [B. D. Todd, Denis J. Evans, and Peter J. Daivis, Phys. Rev. E 52, 1627 (1995)]. We demonstrate its application in determining the radial shear stress dependence during molecular dynamics simulations of the forced flow of methane in cylindrical silica mesopores. Such expressions are useful for the examination of constitutive relations in the context of transport in confined systems.

Mapping the royal road and other hierarchical functions

In this paper we present a technique for visualising hierarchical and symmetric, multimodal fitness functions that have been investigated in the evolutionary computation literature. The focus of this technique is on landscapes in moderate-dimensional, binary spaces (i.e., fitness functions defined over {0, 1}(n), for n less than or equal to 16). The visualisation approach involves an unfolding of the hyperspace into a two-dimensional graph, whose layout represents the topology of the space using a recursive relationship, and whose shading defines the shape of the cost surface defined on the space. Using this technique we present case-study explorations of three fitness functions: royal road, hierarchical-if-and-only-if (H-IFF), and hierarchically decomposable functions (HDF). The visualisation approach provides an insight into the properties of these functions, particularly with respect to the size and shape of the basins of attraction around each of the local optima.

Wall mediated transport in confined spaces: Exact theory for low density

We present a theory for the transport of molecules adsorbed in slit and cylindrical nanopores at low density, considering the axial momentum gain of molecules oscillating between diffuse wall reflections. Good agreement with molecular dynamics simulations is obtained over a wide range of pore sizes, including the regime of single-file diffusion where fluid-fluid interactions are shown to have a negligible effect on the collective transport coefficient. We show that dispersive fluid-wall interactions considerably attenuate transport compared to classical hard sphere theory.

Molecular transport in nanopores

Simulation of the transport of methane in cylindrical silica mesopores have been performed using equilibrium and nonequilibrium molecular dynamics (NEMD) as well as dual control volume grand canonical molecular dynamics methods. It is demonstrated that all three techniques yield the same transport coefficient even in the presence of viscous flow. A modified locally averaged density model for viscous flow, combined with consideration of wall slip through a frictional condition, gives a convincing interpretation of the variation of the transport coefficient over a wide range of densities, and for various pore sizes and temperatures. Wall friction coefficients extracted from NEMD simulations are found to be consistent with momentum transfer arguments, and the approach is shown to be more meaningful than the classical slip length concept. (C) 2003 American Institute of Physics.

Conceitos de eletricidade e suas aplicações tecnológicas : uma unidade de ensino potencialmente significativa

O presente trabalho teve como objetivo central a elaboração de uma unidade de ensino sobre conceitos de eletricidade e validação desse material como uma Unidade de Ensino Potencialmente Significativa (UEPS). Assim, foi desenvolvida uma unidade de ensino sobre os temas diferença de potencial, corrente elétrica e suas aplicações sob a luz da Teoria da Aprendizagem Significativa de Ausubel e aplicada em seis turmas do terceiro ano do ensino médio de uma escola estadual do Espírito Santo. A fim de investigação das potencialidades desse método de ensino, utilizou-se metodologias de pesquisa qualitativa descritiva interpretativa e quantitativa préexperimental. Tendo em vista a importância dos conhecimentos prévios dos estudantes para promover aprendizagem significativa, no início do estudo foram aplicados questionários de opinião, realizados diálogos prévios e construções de mapas conceituais, sendo esses importantes instrumentos para a adequação do material apresentado ao aluno em relação ao seu perfil e à sua estrutura cognitiva. Para coleta de dados da pesquisa foram feitas gravações em áudio das principais etapas, diários de bordo, fotografias dos trabalhos, questionários e mapas conceituais prévios e finais e, finalmente, avaliação escrita. A análise dos mapas conceituais constituiu um dos principais instrumentos para avaliação sob o ponto de vista do desenvolvimento cognitivo dos estudantes, no sentido de classificar os mapas, associá-los às estruturas cognitivas de quem os construiu e identificar variações estatisticamente válidas em relação às construções de novos significados. A investigação revelou que, de modo geral, a unidade foi responsável por melhorias significativas na predisposição dos alunos em aprender e na promoção da aprendizagem significativa, possibilitando sua a validação como uma UEPS.