An exploratory taxonomic study of IMP Group conference papers

The paper describes exploratory research into the nature of IMP conference papers with particular focus on content. A qualitative analysis of the proceedings of the 16th annual IMP conference is presented. The results provide insights into the diversity of academic thought that fuels the development of the IMP network and allows us to begin charting the development of knowledge structures within past IMP conferences. Of particular interest are, firstly, the tentative knowledge structure that emerges, secondly, the depth of analysis that emerges from using multi dimension coding and thirdly the utility of the process of successive categorisation.

Examining Chinese Tourists’ Nature-based Tourism Participantion Behavior: Incorporating Environmental Concern into a Constraint-Negotiation Modela

Finding the balance between economic development and preservation of the natural environment is a challenging yet important task. This is a particularly pressing issue in the case of China, as it is the largest and fastest-growing market for tourism. The purpose of this research is to examine Chinese tourists’ participation in nature-based, tourism activities by incorporating tourists’ environmental concern, measured by a revised New Environmental Paradigm (NEP) scale, into a tourism constraint-negotiation model. The responses of 409 Chinese tourists show environmental concern will positively affect tourists’ motivation, which, in turn, will affect their negotiation strategy and ultimately their participation behavior. The theoretical and managerial implications of this study are discussed in the context of the tourism literature.

The effect of playground and nature-based interventions on physical activity and self-esteem in UK school children

School playtime provides opportunities for children to engage in physical activity (PA). Playground playtime interventions designed to increase PA have produced differing results. However, nature can also promote PA, through the provision of large open spaces for activity. The purpose of this study is to determine which playtime interventions are most effective at increasing moderate-to-vigorous physical activity (MVPA) and if this varies by school location. Fifty-two children from an urban and rural school participated in a playground sports (PS) and nature-based orienteering intervention during playtime for one week. MVPA was assessed the day before and on the final day of the interventions using accelerometers. Intervention type (p < 0.05) and school location (p < 0.001) significantly influenced MVPA; with PS increasing MVPA more than nature-based orienteering. Urban children seemed to respond to the interventions more positively; however, differences in baseline MVPA might influence these changes. There was a positive correlation for fitness and MVPA during PS (r = 0.32; p < 0.05), but not nature-based orienteering (p > 0.05). The provision of PS influences PA the most; however, a variety of interventions are required to engage less fit children in PA.

The Wilderness Expedition: An effective life course intervention to improve young peoples well-being and connectedness to nature

It is well understood that wilderness expeditions improve well-being; however, there is little supporting quantitative data. The aim of this study was to measure the impact of wilderness expeditions on self-esteem (SE) and connectedness to nature (CN) and assess whether benefits varied according to participant and expedition characteristics. SE and CN were assessed pre– and post–wilderness expeditions in 130 adolescents using Rosenberg’s SE scale and the state CN scale. Two-way ANOVA revealed significant increases in SE and CN (p < .001) as a result of single expeditions. There was also an interaction effect of expedition and gender on SE (p < .05). Males had a higher SE at the start but female SE increased most. Linear regression revealed that living environment, gender, and the length and location of the expedition did not contribute to changes in SE and CN. Regular contact with natural environments will improve adolescent well-being, with the largest improvements in females.

Optimization techniques for power distribution planning with uncertainties: a comparative study

Important research effort has been devoted to the topic of optimal planning of distribution systems. The non linear nature of the system, the need to consider a large number of scenarios and the increasing necessity to deal with uncertainties make optimal planning in distribution systems a difficult task. Heuristic techniques approaches have been proposed to deal with these issues, overcoming some of the inherent difficulties of classic methodologies. This paper considers several methodologies used to address planning problems of electrical power distribution networks, namely mixedinteger linear programming (MILP), ant colony algorithms (AC), genetic algorithms (GA), tabu search (TS), branch exchange (BE), simulated annealing (SA) and the Bender´s decomposition deterministic non-linear optimization technique (BD). Adequacy of theses techniques to deal with uncertainties is discussed. The behaviour of each optimization technique is compared from the point of view of the obtained solution and of the methodology performance. The paper presents results of the application of these optimization techniques to a real case of a 10-kV electrical distribution system with 201 nodes that feeds an urban area.

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

Data analysis applied to the evaluation of a technological nature teaching model as a regional development tool

This paper presents the creation and development of technological schools directly linked to the business community and to higher public education. Establishing themselves as the key interface between the two sectors they make a signigicant contribution by having a greater competitive edge when faced with increasing competition in the tradional markets. The development of new business strategies supported by references of excellence, quality and competitiveness also provides a good link between the estalishment of partnerships aiming at the qualification of education boards at a medium level between the technological school and higher education with a technological foundation. We present a case study as an example depicting the success of Escola Tecnológica de Vale de Cambra.

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Of Structural Denial: A Narratological Study of the Structural Disintegration of the Novel Form

If an opening to the argument of this dissertation is of imperative necessity, one might tentatively begin with Herbert Quain, born in Roscommon, Ireland, author of the novels The God of the Labyrinth (1933) and April March (1936), the short-story collection Statements (1939), and the play The Secret Mirror (undated). To a certain extent, this idiosyncratic Irish author, who hailed from the ancient province of Connacht, may be regarded as a forerunner of the type of novels which will be considered in this dissertation. Quain was, after all, the unconscious creator of one of the first structurally disintegrated novels in the history of western literature, April March. His first novel, The God of the Labyrinth, also exhibits elements which are characteristic of structurally disintegrated fiction, for it provides the reader with two possible solutions to a mysterious crime. As a matter of fact, one might suggest that Quain’s debut novel offers the reader the possibility to ignore the solution to the crime and carry on living his or her readerly life, turning a blind eye to the novel itself. It may hence be argued that Quain’s first novel is in fact a compound of three different novels. It is self-evident that the structure of Quain’s oeuvre is of an experimental nature, combining geometrical precision with authorial innovation, and one finds in it a higher consideration for formal defiance than for the text itself. In other words, the means of expression are the concern of the author and not, interestingly, the textual content. April March, for example, is a novel which regresses back into itself, its first chapter focussing on an evening which is preceded by three possible evenings which, in turn, are each preceded by three other, dissimilar, possible evenings. It is a novel of backward-movement, and it is due to this process of branching regression that April March contains within itself at least nine possible novels. Structure, therefore, paradoxically controls the text, for it allows the text to expand or contract under its formal limitations. In other words, the formal aspects of the novel, usually associated with the restrictive device of a superior design, contribute to a liberation of the novel’s discourse. It is paradoxical only in the sense that the idea of structure necessarily entails the fixation of a narrative skeleton that determines how plot and discourse interact, something which Quain flouts for the purposes of innovation. In this sense, April March’s convoluted structure allows for multiple readings and interpretations of the same text, consciously germinating narratives within itself, producing different texts from a single, unique source. Thus, text and means of expression are bonded by a structural design that, rather than limiting, liberates the text of the novel.

Advance directives and the impact of timing. A qualitative study with Swiss general practitioners.

PRINCIPLES: Advance directives are seen as an important tool for documenting the wishes of patients who are no longer competent to make decisions in regards to their medical care. Due to their nature, approaching the subject of advance directives with a patient can be difficult for both the medical care provider and the patient. This paper focuses on general practitioners' perspectives regarding the timing at which this discussion should take place, as well as the advantages and disadvantages of the different moments. METHODS: In 2013, 23 semi-structured face-to-face interviews were performed with Swiss general practitioners. Interviews were analysed using qualitative content analysis. RESULTS: In our sample, 23 general practitioners provided different options that they felt were appropriate moments: either (a) when the patient is still healthy, (b) when illness becomes predominant, or (c) when a patient has been transferred to a long-term care facility. Furthermore, general practitioners reported uncertainty and discomfort regarding initiating the discussion. CONCLUSION: The distinct approaches, perspectives and rationales show that there is no well-defined or "right" moment. However, participants often associated advance directives with death. This link caused discomfort and uncertainty, which led to hesitation and delay on the part of general practitioners. Therefore we recommend further training on how to professionally initiate a conversation about advance directives. Furthermore, based on our results and experience, we recommend an early approach with healthy patients paired with later regular updates as it seems to be the most effective way to inform patients about their end-of-life care options.

Associations between fruit and vegetable consumption and psychological distress: results from a population-based study.

BACKGROUND: Several studies observed associations of various aspects of diet with mental health, but little is known about the relationship between following the 5-a-day recommendation for fruit and vegetables consumption and mental health. Thus, we examined the associations of the Swiss daily recommended fruit and vegetable intake with psychological distress. METHODS: Data from 20,220 individuals aged 15+ years from the 2012 Swiss Health Survey were analyzed. The recommended portions of fruit and vegetables per day were defined as 5-a-day (at least 2 portions of fruit and 3 of vegetables). The outcome was perceived psychological distress over the previous 4 weeks (measured by the 5-item mental health index [MHI-5]). High distress (MHI-5 score ≤ 52), moderate distress (MHI-5 > 52 and ≤ 72) and low distress (MHI-5 > 72 and ≤ 100) were differentiated and multinomial logistic regression analyses adjusted for known confounding factors were performed. RESULTS: The 5-a-day recommendation was met by 11.6 % of the participants with low distress, 9.3 % of those with moderate distress, and 6.2 % of those with high distress. Consumers fulfilling the 5-a-day recommendation had lower odds of being highly or moderately distressed than individuals consuming less fruit and vegetables (moderate vs. low distress: OR = 0.82, 95 % confidence interval [CI] 0.69-0.97; high vs. low distress: OR = 0.55, 95 % CI 0.41-0.75). CONCLUSIONS: Daily intake of 5 servings of fruit and vegetable was associated with lower psychological distress. Longitudinal studies are needed to further determine the causal nature of this relationship.