883 resultados para Municipal Solid Waste Management
Resumo:
The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem
Resumo:
The problem of solid waste that involves the management, the management and the allocation of these is an issue that permeates all spheres of society, which denotes environmental implications that contribute to the discussion of the environmental crisis in progress. From this perspective, this study aims to investigate and understand the role that consortia, especially the Regional Public Waste Consortium Solid Seridó/RN have waste management, in order to observe their strengths and weaknesses in order to conclude whether they are an appropriate solution to the problem of solid waste. In studying a region that is undergoing a process of institutional organization guided in the solid waste, the focus turned into an interesting academic research point. Since this is a qualitative research, readings were taken of relevant authors to the object and the following legal frameworks, namely: the National Basic Sanitation Policy (Law nº 11.445/2007), the National Policy on Solid Waste (Law nº 12.305/2010 ) and the Law on Public Consortia (Law nº 11.107/2005). The consortium region has about 290.000 inhabitants, generated 40.000 tons of waste a year. As for the final disposal of waste, all municipalities in the region deposit their waste in the open, or in garbage dumps. In the analysis of the Consortium Seridó, a list of issues that are hindering their implementation has been identified. The demands come mainly from the political sphere, but also financial, technical and logistical. It is expected that with the realization of the Consortium by building its supporting structures (overfill Station and Landfill), a new model of solid waste management is implemented.
Resumo:
Com a realização deste trabalho, pretendeu-se efetuar uma seleção de culturas mistas em reatores semi-descontínuos (SBR) com capacidade de acumulação de polihidroxialcanoatos (PHA). Para a seleção de culturas foram utilizados inóculos provenientes de diferentes Estações de Tratamento de Águas Residuais (ETAR) e ácidos orgânicos voláteis (AOV) como fonte de carbono. Foram testadas diferentes condições como a proveniência do inóculo, as cargas orgânicas aplicadas e a seleção de culturas utilizando soro de queijo. Verificaram-se elevadas remoções da CQO (acima de 90%) em grande parte dos ensaios realizados, apresentando uma acumulação de PHA por parte de algumas espécies de bactérias presentes. Ocorreu o aparecimento de microrganismos filamentosos com capacidade de acumulação de PHA em alguns ensaios, levando a serem testadas como culturas acumuladoras de PHA. A estabilidade das culturas mistas não foi atingida, mesmo havendo ensaios com 80 dias de operação. Efetuaram-se ensaios de acumulação de PHA em reatores descontínuos, utilizando as culturas selecionadas anteriormente em reatores SBR, com AOV provenientes da acidificação anaeróbia de diferentes resíduos (Fração Orgânica dos Resíduos Sólidos Urbanos - FORSU e Soro de Queijo). Verificou-se uma melhor acumulação por parte das culturas selecionadas com soro de queijo, na qual a quantidade de polímero acumulado triplicou.
Resumo:
Leachates are effluent produced by decomposition of solid waste, they have complex composition and can be highly toxic. Therefore such percolated liquid should be collected and treated properly to avoid environmental contamination of soil and of water bodies. The objective of this study was to evaluate the toxicity through ecotoxicological tests with Ceriodaphnia dubia (Cladocera - Crustacea) of percolated liquids generated in two different systems of municipal solid waste (MSW) disposal in the city of Natal/ RN: A Sanitary Landfill in the Metropolitan Region of Natal/ RN, and in a dump off area. Furthermore, it was evaluated the possible contamination of the underground water of the dump off area. Two monthly samples were taken at four points between the months of May/2009 and January/2010. The Point "A" corresponds to the end of the pond leachate treatment in ASRMN; The Point "B" corresponds to a containment pond at the dump. The Point "C" is an area near one of the cells of the dump off area where the leachate outcrops; The Point "D" stands for an underground water well at the area. The last point, called "E" was sampled only once and corresponds to the slurry produced by temporary accumulation of solid waste in the open area of the dump. The ecotoxicological tests, acute and chronic, followed the ABNT 13373/2005 rules, with some modifications. The samples were characterized by measuring the pH number, the dissolved oxygen (DO), the salinity, BOD5, COD, Cd, Cu, Pb, Cr, Fe, Mg, Ni, and Zn. At Point A, the average number of EC50-48h ranged between 1.0% and 2.77% (v/v), showing a high toxicity of the leachate to C.dubia in all months. To this point, positive correlations were found between the EC50- 48 with precipitation. Negative correlations were found between the EC50- 48h with salinity. At point B there was no response of the acute exposure of organisms to the test samples. At point C the EC50-48h ranged from 17.68% to 35.36% in just two months of the five ones analyzed, not correlated meaning. Point D, the EC50-48h level ranged between 12.31% and 71.27%, showed a negative correlation with, only, precipitation. Although it was observed toxicity of underground water in the Landfill Area, there was no evidence of water contamination by leachate, however, due to the toxic character of this water, additional tests should be conducted to confirm the quality of water that is used for human supply. At point E there was no acute toxicity. These results support the dangers of inappropriate disposal of MSW to water bodies due to the high toxicity of the leachate produced highlighting the necessity of places of safe confinement and a treatment system more effective to it
Resumo:
La generación de residuos sólidos dentro de las mecánicas automotrices en la actualidad, se ha convertido en unos de los principales problemas difíciles de manejar y solucionar, debido al incremento y demanda de vehículos, generando un impacto ambiental negativo tanto en el área de trabajo como en la ciudad. Por tal razón, en varias ciudades del Ecuador y del mundo se ha propuesto la implementación de diferentes planes para el manejo de Residuos Sólidos en este sector. El presente estudio está enfocado a la elaboración de un plan de gestión de Residuos Sólidos, aplicado a dos mecánicas automotrices de la ciudad de Cuenca: J.J. & HIJO y MAGL, realizando de esta manera un análisis a los factores que inciden en la eficiencia y eficacia del mismo. El diseño y aplicación del plan de gestión permitirá estimar el grado de impacto ambiental producido por la generación de los residuos en mecánicas automotrices, por otro lado permitirá la optimización de recursos, disminución de impactos y contaminaciones ambientales, mejoras en el sistema de clasificación, recolección, transporte y disposición final de los desechos e impulsar la conservación de ambiente que nos rodea.
Resumo:
Leachates are effluent produced by decomposition of solid waste, they have complex composition and can be highly toxic. Therefore such percolated liquid should be collected and treated properly to avoid environmental contamination of soil and of water bodies. The objective of this study was to evaluate the toxicity through ecotoxicological tests with Ceriodaphnia dubia (Cladocera - Crustacea) of percolated liquids generated in two different systems of municipal solid waste (MSW) disposal in the city of Natal/ RN: A Sanitary Landfill in the Metropolitan Region of Natal/ RN, and in a dump off area. Furthermore, it was evaluated the possible contamination of the underground water of the dump off area. Two monthly samples were taken at four points between the months of May/2009 and January/2010. The Point "A" corresponds to the end of the pond leachate treatment in ASRMN; The Point "B" corresponds to a containment pond at the dump. The Point "C" is an area near one of the cells of the dump off area where the leachate outcrops; The Point "D" stands for an underground water well at the area. The last point, called "E" was sampled only once and corresponds to the slurry produced by temporary accumulation of solid waste in the open area of the dump. The ecotoxicological tests, acute and chronic, followed the ABNT 13373/2005 rules, with some modifications. The samples were characterized by measuring the pH number, the dissolved oxygen (DO), the salinity, BOD5, COD, Cd, Cu, Pb, Cr, Fe, Mg, Ni, and Zn. At Point A, the average number of EC50-48h ranged between 1.0% and 2.77% (v/v), showing a high toxicity of the leachate to C.dubia in all months. To this point, positive correlations were found between the EC50- 48 with precipitation. Negative correlations were found between the EC50- 48h with salinity. At point B there was no response of the acute exposure of organisms to the test samples. At point C the EC50-48h ranged from 17.68% to 35.36% in just two months of the five ones analyzed, not correlated meaning. Point D, the EC50-48h level ranged between 12.31% and 71.27%, showed a negative correlation with, only, precipitation. Although it was observed toxicity of underground water in the Landfill Area, there was no evidence of water contamination by leachate, however, due to the toxic character of this water, additional tests should be conducted to confirm the quality of water that is used for human supply. At point E there was no acute toxicity. These results support the dangers of inappropriate disposal of MSW to water bodies due to the high toxicity of the leachate produced highlighting the necessity of places of safe confinement and a treatment system more effective to it
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2015
Resumo:
Introducción: La implicación social dentro de la problemática ambiental, establece una relación causal entre hábitos e impacto ambiental; aspectos del comportamiento humano tales como la conveniencia, familiaridad, presión social y actitud, nos permiten realizar un acercamiento acerca de la decisión de reciclar o no en un hogar. Objetivo: identificar los factores ambientales asociados con el manejo de residuos domésticos entre los miembros de una comunidad residencial en la ciudad de Bogotá. Materiales y métodos: Se realizó un estudio transversal realizado a 200 personas de una comunidad residencial. La evaluación de la conducta pro-ambiental se llevó a cabo por medio de la utilización de la Escala del Comportamiento Pro-ambiental desarrollada por Corral-Verdugo unida a la escala de Reciclaje de Sidique. Para el tratamiento estadístico se empleó el análisis de regresión lineal múltiple. Resultados: La mayoría de los encuestados fueron hombres (55%), con una mediana de edad de 37,5 años. Más de la mitad tenía por lo menos formación en pregrado (53%), el 55,5% contaban con un empleo al momento de la entrevista, cerca del 50% de las personas refirieron tener casa propia y la mediana del tamaño de las mismas fue de 80 m2. De los aspectos sociodemográficos, el tipo de vivienda, sexo y edad, estuvieron relacionados con los factores ambientales pro reciclaje. Mientras que las conductas proambientales relacionadas fueron: altruismo, frugalidad, conducta ecológica general, indignación y aprecio por la naturaleza. Conclusiones: Las conductas proambientales Altruismo, Frugalidad, Conducta Ecológica, Indignación y Aprecio por lo natural, están relacionadas con la intención de reciclar. Para futuras investigaciones es necesario constatar la realización del comportamiento proambiental, para aseverar de manera irrebatible que las dimensiones analizadas pueden soportar una acción real y no un auto reporte de una conducta.
Resumo:
In order to meet the recycling and recovery targets set forth by the European Union's (EU) Waste and Landfill Directives, both the Irish and Czech governments’ policy on waste management is changing to meet these pressures, with major emphasis being placed upon the management of biodegradable municipal waste (BMW). In particular, the EU Landfill Directive requires reductions in the rate of BMW going to landfill to 35% of 1995 values by 2016 and 2020 for Ireland and the Czech Republic, respectively. In this paper, the strategies of how Ireland and the Czech Republic plan to meet this challenge are compared. Ireland either landfills or exports its waste for recovery, while the Czech Republic has a relatively new waste management infrastructure. While Ireland met the first target of 75% diversion of BMW from landfill by 2010 and preliminary 2012 data indicate that Ireland is on track to meet the 2013 target, the achievement of the 2016 target remains at risk. Indicators that were developed to monitor the Czech Republic's path to meeting the targets demonstrate that it did not meet the first target that was set for 2010 and will probably not meet its 2013 target either. The evaluation reports on the implementation of Waste Management Plan of Czech Republic suggest that the currently applied strategy to divert biodegradable waste from landfill is not effective enough. For both countries, the EU Waste Framework and Landfill Directives will be a significant influence and driver of change in waste management practices and governance over the coming decade. This means that both countries will not only have to invest in infrastructure to achieve the targets, but will also have to increase awareness among the public in diverting this waste at the household level. Improving environmental education is part of increased awareness as it is imperative for citizens to understand the consequences of their actions as affluence continues to grow producing increased levels of waste.
Graphical abstract
Despite the differences in the levels of waste generation in both the Czech Republic and Ireland, each country can learn from each other in order to meet the recycling and recovery targets set by the European Union's (EU) Waste and Landfill Directives. Both countries will not only have to invest in infrastructure to achieve the targets, but will also have to increase awareness among the public in diverting this waste at the household level. In addition, there needs to be minimum safe standards when land-spreading organic agricultural and organic municipal and industrial materials on agricultural land used for food production, as well as incentives to increase BMW diversion from landfill such as the increased landfill levy implemented in Ireland and the acceptance of MBT and/or incineration as a means of treating residual waste.
Resumo:
Research of advanced technologies for energy generation contemplates a series of alternatives that are introduced both in the investigation of new energy sources and in the improvement and/or development of new components and systems. Even though significant reductions are observed in the amount of emissions, the proposed alternatives require the use of exhaust gases cleaning systems. The results of environmental analyses based on two configurations proposed for urban waste incineration are presented in this paper; the annexation of integer (Boolean) variables to the environomic model makes it possible to define the best gas cleaning routes based on exergetic cost minimisation criteria. In this first part, the results for steam cogeneration system analysis associated with the incineration of municipal solid wastes (MSW) is presented. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities’ corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological strengths and shortcomings. This work compares four different waste emissions quantification methods, including Intergovernmental Panel on Climate Change (IPCC) 1996 guidelines, IPCC 2006 guidelines, U.S. Environmental Protection Agency (EPA) Waste Reduction Model (WARM), and the Federation of Canadian Municipalities- Partners for Climate Protection (FCM-PCP) quantification tool. Waste disposal data for the greater Toronto area (GTA) in 2005 are used for all methodologies; treatment options (including landfill, incineration, compost, and anaerobic digestion) are examined where available in methodologies. Landfill was shown to be the greatest source of GHG emissions, contributing more than three-quarters of total emissions associated with waste management. Results from the different landfill gas (LFG) quantification approaches ranged from an emissions source of 557 kt carbon dioxide equivalents (CO2e) (FCM-PCP) to a carbon sink of −53 kt CO2e (EPA WARM). Similar values were obtained between IPCC approaches. The IPCC 2006 method was found to be more appropriate for inventorying applications because it uses a waste-in-place (WIP) approach, rather than a methane commitment (MC) approach, despite perceived onerous data requirements for WIP. MC approaches were found to be useful from a planning standpoint; however, uncertainty associated with their projections of future parameter values limits their applicability for GHG inventorying. MC and WIP methods provided similar results in this case study; however, this is case specific because of similarity in assumptions of present and future landfill parameters and quantities of annual waste deposited in recent years being relatively consistent.
Resumo:
The research aims to propose grants for development of Municipal Plan for the Management of Organic Solid Waste generated in the municipality of Rio Claro. The research universe was composed of organic waste generators establishments (markets and grocers). From the registry of commercial establishments provided by the municipal government were identified who presented this typology, which totaled 38 establishments. In this universe the interview was conducted in 15 establishments obtained by directed sampling based on the characteristics of size, type and location. The data collected were the amount generated, disposal of waste, waste separation, collection frequency, reasons for the disposal of waste, frequency of purchase of products. From the data obtained in the field, we estimated the total generation of organic waste in this segment for the municipality. Then, the estimated costs for implementation and operation of a composting center, a way to subsidize the implementation of the management plan was carried out. We opted for the aerobic composting process by the simplicity of operation and because it is a technique already known. The average waste generation was established by tracks (size) with: stores up to 4 boxes (classified as small) generate on average 1511 kg / month, 40% of organic waste, the 5-9 boxes (small/midsize) generate on average 4338 kg / month, 35% organic and the 10 to 19 boxes (midsize) generate on average 7647 kg / month with 32% organic. In total establishments generate 105 t/ month of waste, with 35t / month of organics. 94% of establishments are in font segregation of waste into recyclable, organic and waste, indicating that the proposed management of organic waste is amenable to application without many changes in existing routine in stores. Recyclables are sent for recycling through selective collection held by the cooperative, while the organics are destined for the landfill and feed. The results indicate...
Resumo:
Waste management represents an important issue in our society and Waste-to-Energy incineration plants have been playing a significant role in the last decades, showing an increased importance in Europe. One of the main issues posed by waste combustion is the generation of air contaminants. Particular concern is present about acid gases, mainly hydrogen chloride and sulfur oxides, due to their potential impact on the environment and on human health. Therefore, in the present study the main available technological options for flue gas treatment were analyzed, focusing on dry treatment systems, which are increasingly applied in Municipal Solid Wastes (MSW) incinerators. An operational model was proposed to describe and optimize acid gas removal process. It was applied to an existing MSW incineration plant, where acid gases are neutralized in a two-stage dry treatment system. This process is based on the injection of powdered calcium hydroxide and sodium bicarbonate in reactors followed by fabric filters. HCl and SO2 conversions were expressed as a function of reactants flow rates, calculating model parameters from literature and plant data. The implementation in a software for process simulation allowed the identification of optimal operating conditions, taking into account the reactant feed rates, the amount of solid products and the recycle of the sorbent. Alternative configurations of the reference plant were also assessed. The applicability of the operational model was extended developing also a fundamental approach to the issue. A predictive model was developed, describing mass transfer and kinetic phenomena governing the acid gas neutralization with solid sorbents. The rate controlling steps were identified through the reproduction of literature data, allowing the description of acid gas removal in the case study analyzed. A laboratory device was also designed and started up to assess the required model parameters.
Resumo:
"SW-870"--Cover.
Resumo:
"Contract no. 68-03-2940."