Normalização dos trabalhos de demolição: proposta de elaboração de um modelo de um plano de demolição

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil Especialização em Edificações

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm3 s 1 standard temperature and pressure conditions.

Dual augmentation for aerobic bioremediation of MTBE and TCE pollution in heavy metal-contaminated soil

In this work we isolated from soil and characterized several bacterial strains capable of either resisting high concentrations of heavy metals (Cd2+ or Hg2+ or Pb2+) or degrading the common soil and groundwater pollutants MTBE (methyl-tertbutyl ether) or TCE (trichloroethylene). We then used soil microcosms exposed to MTBE (50 mg/l) or TCE (50 mg/l) in the presence of one heavy metal (Cd 10 ppm or Hg 5 ppm or Pb 50 or 100 ppm) and two bacterial isolates at a time, a degrader plus a metalresistant strain. Some of these two-membered consortia showed degradation efficiencies well higher (49–182% higher) than those expected under the conditions employed, demonstrating the occurrence of a synergetic relationship between the strains used. Our results show the efficacy of the dual augmentation strategy for MTBE and TCE bioremediation in the presence of heavy metals.

Anodic adsorptive stripping voltammetric determination of atrazine in spiked soil samples with a gold microelectrode

Microwave-assisted solvent extraction was combined with anodic adsorptive stripping voltammetry at a gold microelectrode to extract and quantify the herbicide atrazine in spiked soil samples. A systematic study of the experimental parameters affecting the stripping response was carried out by square-wave voltammetry. The voltammetric procedure is based on controlled adsorptive accumulation of atrazine at the potential of 0.35V (versus Ag/AgCl) in the presence of Britton–Robinson buffer pH (2.0). The limit of detection obtained for a 30 sec collection time was 4.3x10-7 mol L-1. Recovery experiments, at the 1µgg-1 level of spiking, gave good results for the global procedure, and the values found were comparable to those obtained by HPLC.

Modelo preditivo de óbito a partir de dados do Sistema de Informações Hospitalares

OBJETIVO: Desenvolver um modelo preditivo de óbito hospitalar com base nos dados do Sistema de Informações Hospitalares do Sistema Único de Saúde. MÉTODOS: Estudo transversal com dados de 453.515 autorizações de internação de 332 hospitais do Rio Grande do Sul no ano de 2005. A partir da razão entre óbitos observados e óbitos esperados elaborou-se um ranking ajustado dos hospitais que foi comparado ao ranking bruto da taxa de mortalidade. Utilizou-se regressão logística para desenvolvimento do modelo preditivo de probabilidade para óbito hospitalar segundo sexo, idade, diagnóstico e uso de unidade de terapia intensiva. Foram obtidos os intervalos com 95% de confiança para 206 hospitais com mais de 365 internações por ano. RESULTADOS: Obteve-se um índice de risco para mortalidade hospitalar. A ordenação dos hospitais utilizando apenas a taxa de mortalidade bruta diferiu da ordenação quando se utiliza o ranking ajustado pelo modelo preditivo de probabilidade. Dos 206 hospitais analisados, 40 hospitais apresentaram mortalidade observada significativamente superior à esperada e 58 hospitais com mortalidade significativamente inferior à esperada. Uso de unidade de terapia intensiva apresentou maior peso para a composição do índice de risco, seguida pela idade e diagnóstico. Quando os hospitais atendem pacientes com perfis muito diferentes, o ajuste de risco não resulta numa indicação definitiva sobre qual prestador é o melhor. Os hospitais de grande porte apresentaram, no conjunto, maior número de óbitos do que seria esperado de acordo com as características das internações. CONCLUSÕES: O índice de risco de óbito hospitalar mostrou-se preditor adequado para o cálculo dos óbitos esperados, podendo ser aplicado na avaliação do desempenho hospitalar. Recomenda-se que, ao comparar hospitais, seja utilizado o ajuste pelo modelo preditivo de probabilidade de risco, estratificando-se pelo porte do hospital.

Citrate selective electrodes for the flow injection analysis of soft drinks, beers and pharmaceutical products

Aiming the establishment of simple and accurate readings of citric acid (CA) in complex samples, citrate (CIT) selective electrodes with tubular configuration and polymeric membranes plus a quaternary ammonium ion exchanger were constructed. Several selective membranes were prepared for this purpose, having distinct mediator solvents (with quite different polarities) and, in some cases, p-tert-octylphenol (TOP) as additive. The latter was used regarding a possible increase in selectivity. The general working characteristics of all prepared electrodes were evaluated in a low dispersion flow injection analysis (FIA) manifold by injecting 500µl of citrate standard solutions into an ionic strength (IS) adjuster carrier (10−2 mol l−1) flowing at 3ml min−1. Good potentiometric response, with an average slope and a repeatability of 61.9mV per decade and ±0.8%, respectively, resulted from selective membranes comprising additive and bis(2-ethylhexyl)sebacate (bEHS) as mediator solvent. The same membranes conducted as well to the best selectivity characteristics, assessed by the separated solutions method and for several chemical species, such as chloride, nitrate, ascorbate, glucose, fructose and sucrose. Pharmaceutical preparations, soft drinks and beers were analyzed under conditions that enabled simultaneous pH and ionic strength adjustment (pH = 3.2; ionic strength = 10−2 mol l−1), and the attained results agreed well with the used reference method (relative error < 4%). The above experimental conditions promoted a significant increase in sensitivity of the potentiometric response, with a supra-Nernstian slope of 80.2mV per decade, and allowed the analysis of about 90 samples per hour, with a relative standard deviation <1.0%.

Soil remediation time to achieve clean-up goals I: influence of soil water content

The current models are not simple enough to allow a quick estimation of the remediation time. This work reports the development of an easy and relatively rapid procedure for the forecasting of the remediation time using vapour extraction. Sandy soils contaminated with cyclohexane and prepared with different water contents were studied. The remediation times estimated through the mathematical fitting of experimental results were compared with those of real soils. The main objectives were: (i) to predict, through a simple mathematical fitting, the remediation time of soils with water contents different from those used in the experiments; (ii) to analyse the influence of soil water content on the: (ii1) remediation time; (ii2) remediation efficiency; and (ii3) distribution of contaminants in the different phases present into the soil matrix after the remediation process. For sandy soils with negligible contents of clay and natural organic matter, artificially contaminated with cyclohexane before vapour extraction, it was concluded that (i) if the soil water content belonged to the range considered in the experiments with the prepared soils, then the remediation time of real soils of similar characteristics could be successfully predicted, with relative differences not higher than 10%, through a simple mathematical fitting of experimental results; (ii) increasing soil water content from 0% to 6% had the following consequences: (ii1) increased remediation time (1.8–4.9 h, respectively); (ii2) decreased remediation efficiency (99–97%, respectively); and (ii3) decreased the amount of contaminant adsorbed onto the soil and in the non-aqueous liquid phase, thus increasing the amount of contaminant in the aqueous and gaseous phases.

Soil remediation time to achieve clean-up goals II: influence of natural organic matter and water contents

This work reports a relatively rapid procedure for the forecasting of the remediation time (RT) of sandy soils contaminated with cyclohexane using vapour extraction. The RT estimated through the mathematical fitting of experimental results was compared with that of real soils. The main objectives were: (i) to predict the RT of soils with natural organic matter (NOM) and water contents different from those used in experiments; and (ii) to analyse the time and efficiency of remediation, and the distribution of contaminants into the soil matrix after the remediation process, according to the soil contents of: (ii1) NOM; and (ii2) water. For sandy soils with negligible clay contents, artificially contaminated with cyclohexane before vapour extraction, it was concluded that: (i) if the NOM and water contents belonged to the range of the prepared soils, the RT of real soils could be predicted with relative differences not higher than 12%; (ii1) the increase of NOM content from 0% to 7.5% increased the RT (1.8–13 h) and decreased the remediation efficiency (RE) (99–90%) and (ii2) the increase of soil water content from 0% to 6% increased the RT (1.8–4.9 h) and decreased the RE (99–97%). NOM increases the monolayer capacity leading to a higher sorption into the solid phase. Increasing of soil water content reduces the mass transfer coefficient between phases. Concluding, NOM and water contents influence negatively the remediation process, turning it less efficient and more time consuming, and consequently more expensive.

Remediation of soils combining soil vapor extraction and bioremediation: benzene

This work reports the study of the combination of soil vapor extraction (SVE) with bioremediation (BR) to remediate soils contaminated with benzene. Soils contaminated with benzene with different water and natural organic matter contents were studied. The main goals were: (i) evaluate the performance of SVE regarding the remediation time and the process efficiency; (ii) study the combination of both technologies in order to identify the best option capable to achieve the legal clean up goals; and (iii) evaluate the influence of soil water content (SWC) and natural organic matter (NOM) on SVE and BR. The remediation experiments performed in soils contaminated with benzene allowed concluding that: (i) SVE presented (a) efficiencies above 92% for sandy soils and above 78% for humic soils; (b) and remediation times from 2 to 45 h, depending on the soil; (ii) BR showed to be an efficient technology to complement SVE; (iii) (a) SWC showed minimum impact on SVE when high airflow rates were used and led to higher remediation times for lower flow rates; (b) NOM as source of microorganisms and nutrients enhanced BR but hindered the SVE due the limitation on the mass transfer of benzene from the soil to the gas phase.

O papel do educador no modelo curricular do movimento da escola moderna: reflexão em torno da construção da prática profissional supervisionada

Relatório da Prática Profissional Supervisionada Mestrado Em Educação Pré-Escolar

Avaliação da qualidade em creche: implicações e resultados da aplicação do modelo de avaliação da qualidade das respostas sociais - creche, numa instituição particular de solidariedade social

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção do Grau de Mestre em Ciências da Educação, especialização em Administração Escolar

Como se aprende no jardim-de-infância utilizando o modelo do Movimento da Escola Moderna

Relatório da Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

Modelo de competências dos enfermeiros com funções de gestão em Portugal: estudo exploratório

Nas últimas décadas assistimos a transformações económicas, tecnológicas, políticas e sociais, que influenciaram diretamente o modo de pensar e agir nas organizações. O conceito de competências, com uma valorização crescente, surge como uma alternativa à abordagem da gestão de recursos humanos por funções, respondendo aos desafios atuais do mercado: necessidade de flexibilidade, de adaptação a mudanças contínuas, exigências crescentes do mercado e competitividade das organizações nesse mercado. A área da saúde, e concretamente a profissão de Enfermagem também tem evoluído, surgindo em 2009, uma nova forma de operacionalizar a carreira destes profissionais. No que diz respeito aos enfermeiros com funções de gestão, o conteúdo funcional está descrito, contudo, não existe uma definição clara das competências requeridas para estes profissionais. Este trabalho de investigação, de cariz exploratório, utilizando uma metodologia qualitativa, pretendeu propor uma estratégia de definição de um modelo de competências para os enfermeiros com funções de gestão em Portugal. Para isso, definimos categorias de competências, através da análise da literatura e da legislação. Seguiu-se a realização de entrevistas a um painel de doze peritos, e uma análise de conteúdo dos dados (categorização do tipo misto). Procedemos a uma comparação da recolha empírica de competências com as da recolha teórica, e definimos uma lista de 10 competências para as funções de gestão dos enfermeiros: Competências Técnicas de Gestão; Competências Interpessoais; Comunicação; Gestão de Recursos Humanos; Pensamento Crítico; Conhecimento de Políticas de Saúde; Competências Técnicas de Enfermagem; Organização e Planeamento; Trabalho de Equipa; Preocupação pela Qualidade. De forma a complementar o estudo, pretendemos identificar a perceção das lacunas de competências nos enfermeiros com funções de gestão, e identificar os processos de desenvolvimento de competências considerados mais relevantes para estes profissionais. As lacunas identificadas nas competências dos atuais enfermeiros com funções de gestão, face às mais valorizadas, são reduzidas e dispersas, pelo que consideramos pouco significativas. A forma de desenvolvimento de competências mais valorizado pelo painel de peritos foi a formação (académica e em contexto profissional). Foi também realçada a importância do empenho individual neste processo, assim como a avaliação de competências antes dos enfermeiros assumirem funções de gestão.Consideramos que esta investigação traz contributos quer para a literatura da Gestão por Competências, quer para a literatura da definição de competências das funções dos enfermeiros com funções de gestão, quer para a profissão de enfermagem, (nomeadamente, para as funções de gestão dos enfermeiros), quer para o próprio SNS, já que faz algumas propostas e sugestões para a evolução das práticas de gestão de pessoas.

Influence of mixtures of acenaphthylene and benzo[a] anthracene on their degradation by Pleurotus ostreatus in sandy soil

Purpose Polycyclic aromatic hydrocarbons (PAHs) are a class of organic compounds commonly found as soil contaminants. Fungal degradation is considered as an environmentally friendly and cost-effective approach to remove PAHs from soil. Acenaphthylene (Ace) and Benzo[a]anthracene (BaA) are two PAHs that can coexist in soils; however, the influence of the presence of each other on their biodegradation has not been studied. The biodegradation of Ace and BaA, alone and in mixtures, by the white rot fungus Pleurotus ostreatus was studied in a sandy soil. Materials and methods Experimental microcosms containing soil spiked with different concentrations of Ace and BaAwere inoculated with P. ostreatus. Initial (t 0) and final (after 15 days of incubation) soil concentrations of Ace and BaA were determined after extraction of the PAHs. Results and discussion P. ostreatus was able to degrade 57.7% of the Ace in soil spiked at 30 mg kg−1 dry soil and 65.8% of Ace in soil spiked at 60 mg kg−1 dry soil. The degradation efficiency of BaA by P. ostreatus was 86.7 and 77.4% in soil spiked with Ace at 30 and 60 mg kg−1 dry soil, respectively. After 15 days of incubation, there were no significant differences in Ace concentration between soil spiked with Ace and soil spiked with Ace + BaA, irrespective of the initial soil concentration of both PAHs. There were also no differences in BaA concentration between soil spiked with BaA and soil spiked with BaA + Ace. Conclusions The results indicate that the fungal degradation of Ace and BaA was not influenced by the presence of each other’s PAH in sandy soil. Bioremediation of soils contaminated with Ace and BaA using P. ostreatus is a promising approach to eliminate these PAHs from the environment.

Workplace aggression in organizational changing processes: The mediation role of leader political (soft and hard) behavior

One of the main trends in workplace aggression research is studying its antecedents. But the literature also reveals that some predictors remain understudied, like organizational change [1]. Additionally, possible mediators of this relationship were not investigated. The main objective of this research is studding the mediating effect of the leader political behavior (soft and hard version) on the relationship between organizational change and workplace aggression. Participants representing a wide variety of jobs across many organizations were surveyed. The measures used in this research are an Organizational Change Questionnaire climate of change, processes, and readiness [2], a Workplace Aggression Scale [e.g. 3, 4] and a Political Behavior Questionnaire [5]. The results of the study and its theoretical and practical implications will be presented and discussed.