Development and validation of a miniature programmable tDCS device

Research is being conducted on the use of transcranial direct current stimulation (tDCS) for therapeutic effects, and also on the mechanisms through which such therapeutic effects are mediated. A bottleneck in the progress of the research has been the large size of the existing tDCS systems which prevents subjects from performing their daily activities. To help research into the principles, mechanisms, and benefits of tDCS, reduction of size and weight, improvement in simplicity and user friendliness, portability, and programmability of tDCS systems are vital. This paper presents a design for a low-cost, light-weight, programmable, and portable tDCS device. The device is head-mountable and can be concealed in a hat and worn on the head by the subject while receiving the stimulation. The strength of the direct current stimulation can be selected through a simple user interface. The device is constructed and its performance evaluated through bench and in vivo tests. The tests validated the operation of the device in inducing neuromodulatory changes in primary motor cortex, M1, through measuring excitability of dominant M1 of resting right first dorsal interosseus muscle by transcranial magnetic stimulation induced motor evoked potentials. It was observed that the tDCS device induced comparable neuromodulatory effects in M1 as the existing bulky tDCS systems.

Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and poly(Dimethylsiloxane) (PDMS) polymers

In this paper, a minibioreactor platform made of low cost polymers is presented. The minibioreactor prototype was designed as an alternative solution for carrying out microbial fermentation experiments in laboratory. The minibioreactor prototype has a working volume of 1.5 mL and was fabricated from poly(methylmethacrylate) (PMMA) and poly(dimethylsiloxane) (PDMS) polymers. Cell density was measured online whilst agitation rates and the temperature of the reactor content can be tightly controlled to desired set-point values. As proof-of-concept, various S. cerevisae fermentation experiments were conducted. In every experiment, the minibioreactor operated stably for the entire length of operation which was nearly 40 h with very minimal volume loss i.e. about 2.8 μ·h-1 at 37°C. The minibioreactor has the maximum oxygen transfer rate (OTR) of 16.6 mmol·L-1·h-1 under the agitation rate of 300 rpm. Under these conditions, cell specific growth rate as high as 0.291 h-1 was obtained. The experimental data in the minibioreactor operation was also reproducible using shake flask where similar growth profiles were attained under a similar growth conditions.

A miniature neural recording device

This paper presents a portable neural recording device for use with laboratory animals. It can detect and record neural signals from the cortical region of the brain during pre-clinical trials. The device utilizes simplified circuitry to perform signal detection, filtering, sampling, and storage. It includes analog and digital components each implemented on a separate small printed circuit board. The two printed circuit boards are then attached to one another to form the device. It is capable of uninterrupted operation for over 2 hours on a single coin battery. A bench-testing of the device was performed with pre-recorded neural signal which then injected to the input of the device to give validation of efficient operation of the device. Its amplification and filtration features have been analyzed. An overall 56 dB amplification and filtration in the frequency range of 300 Hz to 4 KHz was achieved. Sampling and storage at a reduced power and computational load is demonstrated with uninterrupted storage of the neural signal. A comparison of the input and reconstructed neural signals shows minimal variation error.

Performance evaluation of 3D printed miniature electromagnetic energy harvesters driven by air flow

As a renewable and non-polluting energy source, wind is used to produce electricity via large-diameter horizontal or vertical axis wind turbines. Such large wind turbines have been well designed and widely applied in industry. However, little attention has been paid to the design and development of miniature wind energy harvesters, which have great potential to be applied to the HVAC (heating, ventilating and air conditions) ventilation exhaust systems and household personal properties. In this work, 10 air-driven electromagnetic energy harvesters are fabricated using 3D printing technology. Parametric measurements are then conducted to study the effects of (1) the blade number, (2) its geometric size, (3) aspect ratio, presence or absence of (4) solid central shaft, (5) end plates, and (6) blade orientation. The maximum electrical power is 0.305 W. To demonstrate its practical application, the electricity generated is used to power 4 LED (light-emitting diode) lights. The maximum overall efficiency ηmax is approximately 6.59%. The cut-in and minimum operating Reynolds numbers are measured. The present study reveals that the 3D printed miniature energy harvesters provide a more efficient platform for harnessing ‘wind power’.

Numerical investigation of a trapped vortex miniature ramjet combustor

The design of a miniature ramjet combustor using gaseous methane fuel for Mach 2.5 has been conducted. The main challenges stem mainly from the insufficient space for mixing and burning, short residence time, and the flame stabilization. Impossible utilization of relatively large air-blast fuel injectors provides more difficulties for the design. The trapped vortex combustor, as a novel way of flameholding by trapping the pilot flame inside a cavity instead of exposing it to the mainstream, is selected. Three main parts are studied numerically, which include the cold flowfield characteristics, the fuel-injection schemes, and the overall combustion performance. The results show that the drag coefficient can helptodetermine the optimum cavity size for trappingastable vortex. Injecting all the fuel inthe cavity always leads to an overly fuel-rich condition, whereas injecting in front of the cavity with a momentum flux ratio q between 0.61 and 1.0 can successfully achieve stoichiometric mixing in the cavity. However, compared to nonreacting fuel mixing, the combustion performance is found to be more sensitive to the value of q. Among the cases studied, the one with a small q of about 0.61 has more intense pilot flames andshorter main combustor flames. The effectsofangled injection, upstream injection location, and the combustor length based on the found q are also investigated.

José de Escovar at the Chapel of the Souls: Technical and Material Study of a 1603 Panel Painting

This article reports the preliminary results of a technical and material study carried out on a 17th century panel painting located at the Chapel of the Souls in the main church of Vila Nova da Baronia (30 km away from Evora city, in southern Portugal). This painting is attributed to Jose the Escovar, a painter that worked for Evora Archiepiscopate between 1583 and 1622. Jose the Escovar is known by his mural paintings all across the Alentejo region. This is the first time that a panel painting made by this artist was studied. Analytical methods used included in situ technical photography (visible (Vis), raking light (RAK), infrared (IR), and ultraviolet (UV)), optical microscopy of cross sections, scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDS), micro Raman spectroscopy, and micro Fourier transform infrared spectroscopy (m-FT-IR). The goal was to ascertain the techniques and colored materials used by Escovar on this painting so that the data can be used in future comparisons with others works attributed to this painter based on stylistic aspects.

Uncover the mantle: rediscovering Gregório Lopes palette and technique with a study on the painting “Mater Misericordiae”

Grego´rio Lopes (c. 1490–1550) was one of the most prominent painters of the renaissance and Mannerism in Portugal. The painting “Mater Misericordiae” made for the Sesimbra Holy House of Mercy, circa 1535–1538, is one of the most significant works of the artist, and his only painting on this theme, being also one of the most significant Portuguese paintings of sixteenth century. The recent restoration provided the possibility to study materially the painting for the first time, with a multianalytical methodology incorporating portable energy-dispersive X-ray fluorescence spectroscopy, scanning electron microscopy–energy-dispersive spectroscopy, micro-X-ray diffraction, micro-Raman spectroscopy and high-performance liquid chromatography coupled to diode array and mass spectrometry detectors. The analytical study was complemented by infrared reflectography, allowing the study of the underdrawing technique and also by dendrochronology to confirm the date of the wooden panels (1535–1538). The results of this study were compared with previous ones on the painter’s workshop, and significant differences and similitudes were found in the materials and techniques used

MATERIAL CHARACTERIZATION OF GILDING AND PAINTING TECHNIQUES OF A POST-BYZANTINE ICON

This study aims to identify the materials used in the production of a post-byzantine icon from the Museum of Évora’s collection. The icon, representing the “Emperor Constantine and his mother Helen holding the Holy Cross” was once dated as being from the 10th century. Throughout a multi-analytical approach, combining area exams with spectroscopic techniques, this study tried to confirm its actual chronology. The results obtained revealed that it is most likely an icon from the late 17th or 18th century.

Calcium sulfate fillers and binders in Portuguese 15th and 16th centuries: Ground layers from a family painting workshop — Study by multianalytical spectroscopic techniques

This study presents results on a developed methodology to characterize ground layers in Portuguese workshops. In this work a set of altarpieces of the 15th and 16th centuries, assigned to Coimbra painting workshop was studied, overall the masters Vicente Gil (doc. Coimbra 1498–1525), Manuel Vicente (doc. Coimbra 1521–1530) and Bernardo Manuel (act. c. 1559–94), father, son and grandson, encompassing from late gothic to mannerist periods. The aim of the study is to compare ground layers, fillers and binders of Coimbra workshop, and to correlate their characteristics to understand the technical evolution of this family of painters, using complementary microscopic techniques. The cross-sections from the groups of paintings were examined by optical microscopy and the results were integrated through the analysis obtained by μ-X–ray diffraction, scanning electron microscopy with energy dispersive X–ray Spectrometry, μ-confocal Raman and occasionally with μ-Fourier transform infrared spectroscopy imaging. Ground layers are of calcium sulfate, present as gesso grosso (mainly anhydrite with small amounts of gypsum) in the first and last phases of the workshop and gesso mate (mainly gypsum with small amounts of anhydrite) in an intermediate period. Binders have protein and oleic characteristics.

Landmark

An inverted figurative monument to Victorian governor Charles Joseph Latrobe. By creating the impression that a nineteenth century statue has been made to stand precariously on its head, the work seeks to address the tension between the authority of the monument (as a civic marker and a form of portraiture) and its ‘invisibility’ in public space while simultaneously addressing (and subverting) the ‘authorless’ nature of the figurative monument. The work was awarded a judge’s commendation in the 2005 Helen Lempriere National Sculpture Award and had strong responses from the viewing public and widespread media coverage. Ironically, this parodic monument had the effect of raising the profile of Charles La Trobe in the media in ways that a conventional monument would not. Landmark now endures as part of the permanent sculpture collection of Latrobe University, Melbourne.

Crop

Solo exhibition of sculptural works that use the portrait bust as a vehicle for problematising notions of subjectivity, authority and representation. The exhibition comprised three life-sized figurative busts, each portraits of the artist, sparsely positioned throughout the gallery space to convey a sense of isolation and abandonment. By emphasising the fragmented nature of the bust format by removal of all supports (ie. Socle, plinth or alcove) the works sought to address the vulnerability that frmes this apparently authoritative Enlightenment portrait format. In so doing the exhibition aimed to offer, by example, a new way of seeing and interpreting the portrait bust in history. The exhibition was exhibited at the Institute of Modern Art (Brisbane) and the Perth Institute of Contemporary Arts. Works fro the exhibition were included in group shows at Linden Centre for Contemporary Arts, Ballarat Fine Art Gallery. Work from the exhibition was purchased for the collection of MONA, Hobart.The exhibition received favourable reviews in Eyeline, Art and Australia and Machine magazines.

Flop II

An installation of sculptural objects that combine references to the portrait bust, drapery and socle with quotidian and incidental objects from the artist's studio. The work form part of the artist's ongoing self-portrait project in which he enacts formal strategies for tempering the authority conveyed by the self-portrait as an artistic genre.

The new Golden Legend: Patrick Nicholas's secular saints

The work of Italian-based photo-artist Patrick Nicholas is analysed to show how his re-workings of classic ‘old-master’ paintings can be seen as the art of ‘redaction,’ shedding new light on the relationship between originality and copying. I argue that redactional creativity is both highly productive of new meanings and a reinvention of the role of the medieval Golden Legend. (Lives of the Saints).

Passive control of a bi-ventricular assist device : an experimental and numerical investigation

For the last two decades heart disease has been the highest single cause of death for the human population. With an alarming number of patients requiring heart transplant, and donations not able to satisfy the demand, treatment looks to mechanical alternatives. Rotary Ventricular Assist Devices, VADs, are miniature pumps which can be implanted alongside the heart to assist its pumping function. These constant flow devices are smaller, more efficient and promise a longer operational life than more traditional pulsatile VADs. The development of rotary VADs has focused on single pumps assisting the left ventricle only to supply blood for the body. In many patients however, failure of both ventricles demands that an additional pulsatile device be used to support the failing right ventricle. This condition renders them hospital bound while they wait for an unlikely heart donation. Reported attempts to use two rotary pumps to support both ventricles concurrently have warned of inherent haemodynamic instability. Poor balancing of the pumps’ flow rates quickly leads to vascular congestion increasing the risk of oedema and ventricular ‘suckdown’ occluding the inlet to the pump. This thesis introduces a novel Bi-Ventricular Assist Device (BiVAD) configuration where the pump outputs are passively balanced by vascular pressure. The BiVAD consists of two rotary pumps straddling the mechanical passive controller. Fluctuations in vascular pressure induce small deflections within both pumps adjusting their outputs allowing them to maintain arterial pressure. To optimise the passive controller’s interaction with the circulation, the controller’s dynamic response is optimised with a spring, mass, damper arrangement. This two part study presents a comprehensive assessment of the prototype’s ‘viability’ as a support device. Its ‘viability’ was considered based on its sensitivity to pathogenic haemodynamics and the ability of the passive response to maintain healthy circulation. The first part of the study is an experimental investigation where a prototype device was designed and built, and then tested in a pulsatile mock circulation loop. The BiVAD was subjected to a range of haemodynamic imbalances as well as a dynamic analysis to assess the functionality of the mechanical damper. The second part introduces the development of a numerical program to simulate human circulation supported by the passively controlled BiVAD. Both investigations showed that the prototype was able to mimic the native baroreceptor response. Simulating hypertension, poor flow balancing and subsequent ventricular failure during BiVAD support allowed the passive controller’s response to be assessed. Triggered by the resulting pressure imbalance, the controller responded by passively adjusting the VAD outputs in order to maintain healthy arterial pressures. This baroreceptor-like response demonstrated the inherent stability of the auto regulating BiVAD prototype. Simulating pulmonary hypertension in the more observable numerical model, however, revealed a serious issue with the passive response. The subsequent decrease in venous return into the left heart went unnoticed by the passive controller. Meanwhile the coupled nature of the passive response not only decreased RVAD output to reduce pulmonary arterial pressure, but it also increased LVAD output. Consequently, the LVAD increased fluid evacuation from the left ventricle, LV, and so actually accelerated the onset of LV collapse. It was concluded that despite the inherently stable baroreceptor-like response of the passive controller, its lack of sensitivity to venous return made it unviable in its present configuration. The study revealed a number of other important findings. Perhaps the most significant was that the reduced pulse experienced during constant flow support unbalanced the ratio of effective resistances of both vascular circuits. Even during steady rotary support therefore, the resulting ventricle volume imbalance increased the likelihood of suckdown. Additionally, mechanical damping of the passive controller’s response successfully filtered out pressure fluctuations from residual ventricular function. Finally, the importance of recognising inertial contributions to blood flow in the atria and ventricles in a numerical simulation were highlighted. This thesis documents the first attempt to create a fully auto regulated rotary cardiac assist device. Initial results encourage development of an inlet configuration sensitive to low flow such as collapsible inlet cannulae. Combining this with the existing baroreceptor-like response of the passive controller will render a highly stable passively controlled BiVAD configuration. The prototype controller’s passive interaction with the vasculature is a significant step towards a highly stable new generation of artificial heart.

Wrapped fragments : Drapery, the eighteenth century portrait bust and the male subject

The depiction of drapery (generalised cloth as opposed to clothing) is a well-established convention of Neo-Classical sculpture and is often downplayed by art historians as of purely rhetorical value. It can be argued however that sculpted drapery has served a spectrum of expressive ends, the variety and complexity of which are well illustrated by a study of its use in portrait sculpture. For the Neo-Classical portrait bust, drapery had substantial iconographic and political meaning, signifying the new Enlightenment notions of masculine authority. Within the portrait bust, drapery also served highly strategic aesthetic purposes, alleviating the abruptness of the truncated format and the compromising visual consequences of the “cropped” body. With reference to Joseph Nollekens’ portraits of English statesman Charles James Fox and the author’s own sculptural practice, this paper analyses the Neo-Classical use of drapery to propose that rendered fabric, far from mere stylistic flourish, is a highly charged visual signifier with much scope for exploration in contemporary sculptural practice.