Sorption characteristics of a nonionic surfactant during remediation of contaminated soil with different organic content

Surfactant enhanced subsurface remediation has gained importance in soil remediation. Since surfactants can be sorbed on soils, the concentration of free surfactant could drop below the critical micelle concentration, CMC, which may reduce the ability of the surfactant to solubilize the contaminants in soils. ^ The main goal of this research was to study the factors affecting the surfactant sorption on soil such as surfactant concentration, soil organic content, and organic contaminants in soil and to determine the organic contaminants removed from soils by surfactant. The results would be served as the basis for the implementation of a future study in the pilot scale and field scale for surfactant enhanced subsurface remediation. ^ This research study investigated the relationship between the organic content of soils and the sorption characteristics of a nonionic surfactant, Triton X-100. The experiments were performed using uncontaminated soils and soil contaminated with naphthalene and decane. The first part of the experiments were conducted in batch mode utilizing surface tension technique to determine the CMC of surfactant Triton X-100 and the effective CMC in the soil/aqueous system. The sorption of Triton X-100 was calculated from the surface tension measurements. The second part of the experiments utilized the SPME/GC/FID technique to determine the concentration of the contaminants solubilized from the soils by the surfactant Triton X-100 at different concentrations. ^ The results indicated that when the concentration of surfactant was lower than the CMC, the amount of surfactant sorbed on soil increased with the increasing surfactant concentration and the surfactant sorption characteristics of the uncontaminated soils could be modeled by the Freundlich isotherm. For the contaminated soils, the amount of surfactant sorbed was higher than those for the uncontaminated soils. The amount of surfactant sorbed on soils also depends on the organic content in the soils. The higher the organic content in the soil, higher is the amount of surfactant sorbed onto the soil. When the concentration of surfactant was higher than the CMC, the amount of surfactant added into the soil/aqueous system will increase the number of micelle and it increase the solubilization of organic contaminant from the soils. The ratio of the moles of organic contaminant solubilized to the moles of surfactant present as micelles is called the molar solubilization ratio (MSR). MSR value for naphthalene was about 0.16 for the soil-water systems. The organic content of soil did not appear to affect MSR for naphthalene. On the other hand, the MSR values for decane were 0.52, 0.39 and 0.38 for soils with 25%, 50% and 75% organic content, respectively. ^

Design, Synthesis, and Photophysical Investigation of Porphyrin-containing Polymer-wrapped Single-walled Carbon Nanotubes

Significant advances in understanding the fundamental photophysical behavior of single-walled carbon nanotubes (SWNTs) have been made possible by the development of ionic, conjugated aryleneethynylene polymers that helically wrap SWNTs with well-defined morphology. My contribution to this work was the design and synthesis of porphyrin-containing polymers and the photophysical investigation of the corresponding polymer-wrapped SWNTs. For these new constructs, the polymer acts as more than just a solubilization scaffold; such assemblies can provide benchmark data for evaluating spectroscopic signatures of energy and charge transfer events and lay the groundwork for further, rational development of polymers with precisely tuned redox properties and electronic coupling with the underlying SWNT. The first design to incorporate a zinc porphyrin into the polymer backbone, PNES-PZn, suffered from severe aggregation in solution and was redesigned to produce the porphyrin-containing polymer S-PBN-PZn. This polymer was utilized to helically wrap chirality-enriched (6,5) SWNTs, which resulted in significant quenching of the porphyrin-based fluorescence. Time-resolved spectroscopy revealed a simultaneous rise and decay of the porphyrin radical cation and SWNT electron polaron spectroscopic signatures indicative of photoinduced electron transfer. A new polymer, S-PBN(b)-Ph2PZn3, was then synthesized which incorporated a meso-ethyne linked zinc porphyrin trimer. By changing the absorption profile and electrochemical redox potentials of the polymer, the photophysical behavior of the corresponding polymer-wrapped (6,5)-SWNTs was dramatically changed, and the polymer-wrapped SWNTs no longer showed evidence for photoinduced electron transfer.

Biologically Inspired Design of Protein-Silica Hybrid Nanoparticles for Drug Delivery Applications

The design and application of effective drug carriers is a fundamental concern in the delivery of therapeutics for the treatment of cancer and other vexing health problems. Traditionally utilized chemotherapeutics are limited in efficacy due to poor bioavailability as a result of their size and solubility as well as significant deleterious effects to healthy tissue through their inability to preferentially target pathological cells and tissues, especially in treatment of cancer. Thus, a major effort in the development of nanoscopic drug delivery vehicles for cancer treatment has focused on exploiting the inherent differences in tumor physiology and limiting the exposure of drugs to non-tumorous tissue, which is commonly achieved by encapsulation of chemotherapeutics within macromolecular or supramolecular carriers that incorporate targeting ligands and that enable controlled release. The overall aim of this work is to engineer a hybrid nanomaterial system comprised of protein and silica and to characterize its potential as an encapsulating drug carrier. The synthesis of silica, an attractive nanomaterial component because it is both biocompatible as well as structurally and chemically stable, within this system is catalyzed by self-assembled elastin-like polypeptide (ELP) micelles that incorporate of a class of biologically-inspired, silica-promoting peptides, silaffins. Furthermore, this methodology produces near-monodisperse, hybrid inorganic/micellar materials under mild reaction conditions such as temperature, pH and solvent. This work studies this material system along three avenues: 1) proof-of-concept silicification (i.e. the formation and deposition of silica upon organic materials) of ELP micellar templates, 2) encapsulation and pH-triggered release of small, hydrophobic chemotherapeutics, and 3) selective silicification of templates to potentiate retention of peptide targeting ability.

Enzymatic Polymerization of High Molecular Weight DNA

The use of DNA as a polymeric building material transcends its function in biology and is exciting in bionanotechnology for applications ranging from biosensing, to diagnostics, and to targeted drug delivery. These applications are enabled by DNA’s unique structural and chemical properties, embodied as a directional polyanion that exhibits molecular recognition capabilities. Hence, the efficient and precise synthesis of high molecular weight DNA materials has become key to advance DNA bionanotechnology. Current synthesis methods largely rely on either solid phase chemical synthesis or template-dependent polymerase amplification. The inherent step-by-step fashion of solid phase synthesis limits the length of the resulting DNA to typically less than 150 nucleotides. In contrast, polymerase based enzymatic synthesis methods (e.g., polymerase chain reaction) are not limited by product length, but require a DNA template to guide the synthesis. Furthermore, advanced DNA bionanotechnology requires tailorable structural and self-assembly properties. Current synthesis methods, however, often involve multiple conjugating reactions and extensive purification steps.

The research described in this dissertation aims to develop a facile method to synthesize high molecular weight, single stranded DNA (or polynucleotide) with versatile functionalities. We exploit the ability of a template-independent DNA polymerase−terminal deoxynucleotidyl transferase (TdT) to catalyze the polymerization of 2’-deoxyribonucleoside 5’-triphosphates (dNTP, monomer) from the 3’-hydroxyl group of an oligodeoxyribonucleotide (initiator). We termed this enzymatic synthesis method: TdT catalyzed enzymatic polymerization, or TcEP.

Specifically, this dissertation is structured to address three specific research aims. With the objective to generate high molecular weight polynucleotides, Specific Aim 1 studies the reaction kinetics of TcEP by investigating the polymerization of 2’-deoxythymidine 5’-triphosphates (monomer) from the 3’-hydroxyl group of oligodeoxyribothymidine (initiator) using in situ 1H NMR and fluorescent gel electrophoresis. We found that TcEP kinetics follows the “living” chain-growth polycondensation mechanism, and like in “living” polymerizations, the molecular weight of the final product is determined by the starting molar ratio of monomer to initiator. The distribution of the molecular weight is crucially influenced by the molar ratio of initiator to TdT. We developed a reaction kinetics model that allows us to quantitatively describe the reaction and predict the molecular weight of the reaction products.

Specific Aim 2 further explores TcEP’s ability to transcend homo-polynucleotide synthesis by varying the choices of initiators and monomers. We investigated the effects of initiator length and sequence on TcEP, and found that the minimum length of an effective initiator should be 10 nucleotides and that the formation of secondary structures close to the 3’-hydroxyl group can impede the polymerization reaction. We also demonstrated TcEP’s capacity to incorporate a wide range of unnatural dNTPs into the growing chain, such as, hydrophobic fluorescent dNTP and fluoro modified dNTP. By harnessing the encoded nucleotide sequence of an initiator and the chemical diversity of monomers, TcEP enables us to introduce molecular recognition capabilities and chemical functionalities on the 5’-terminus and 3’-terminus, respectively.

Building on TcEP’s synthesis capacities, in Specific Aim 3 we invented a two-step strategy to synthesize diblock amphiphilic polynucleotides, in which the first, hydrophilic block serves as a macro-initiator for the growth of the second block, comprised of natural and/or unnatural nucleotides. By tuning the hydrophilic length, we synthesized the amphiphilic diblock polynucleotides that can self-assemble into micellar structures ranging from star-like to crew-cut morphologies. The observed self-assembly behaviors agree with predictions from dissipative particle dynamics simulations as well as scaling law for polyelectrolyte block copolymers.

In summary, we developed an enzymatic synthesis method (i.e., TcEP) that enables the facile synthesis of high molecular weight polynucleotides with low polydispersity. Although we can control the nucleotide sequence only to a limited extent, TcEP offers a method to integrate an oligodeoxyribonucleotide with specific sequence at the 5’-terminus and to incorporate functional groups along the growing chains simultaneously. Additionally, we used TcEP to synthesize amphiphilic polynucleotides that display self-assemble ability. We anticipate that our facile synthesis method will not only advance molecular biology, but also invigorate materials science and bionanotechnology.

Fabrication of sub-10 nm lamellar structures by solvent vapour annealing of block copolymers

Fabrication of nanoscale patterns through the bottom-up approach of self-assembly of phase-separated block copolymers (BCP) holds promise for nanoelectronics applications. For lithographic applications, it is useful to vary the morphology of BCPs by monitoring various parameters to make “from lab to fab” a reality. Here I report on the solvent annealing studies of lamellae forming polystyrene-blockpoly( 4-vinylpyridine) (PS-b-P4VP). The high Flory-Huggins parameter (χ = 0.34) of PS-b-P4VP makes it an ideal BCP system for self-assembly and template fabrication in comparison to other BCPs. Different molecular weights of symmetric PS-b-P4VP BCPs forming lamellae patterns were used to produce nanostructured thin films by spin-coating from mixture of toluene and tetrahydrofuran(THF). In particular, the morphology change from micellar structures to well-defined microphase separated arrangements is observed. Solvent annealing provides a better alternative to thermal treatment which often requires long annealing periods. The choice of solvent (single and dual solvent exposure) and the solvent annealing conditions have significant effects on the morphology of films and it was found that a block neutral solvent was required to realize vertically aligned PS and P4VP lamellae. Here, we have followed the formation of microdomain structures with time development at different temperatures by atomic force microscopy (AFM). The highly mobilized chains phase separate quickly due to high Flory-Huggins (χ) parameter. Ultra-small feature size (~10 nm pitch size) nanopatterns were fabricated by using low molecular weight PSb- P4VP (PS and P4VP blocks of 3.3 and 3.1 kg mol-1 respectively). However, due to the low etch contrast between the blocks, pattern transfer of the BCP mask is very challenging. To overcome the etch contrast problem, a novel and simple in-situ hard mask technology is used to fabricate the high aspect ratio silicon nanowires. The lamellar structures formed after self-assembly of phase separated PS-b-P4VP BCPs were used to fabricate iron oxide nanowires which acted as hard mask material to facilitate the pattern transfer into silicon and forming silicon nanostructures. The semiconductor and optical industries have shown significant interest in two dimensional (2D) molybdenum disulphide (MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not ‘fab’ friendly and require harsh environments and processes. Here, I also report a novel method to prepare MoS2 layered structures via self-assembly of a PS-b-P4VP block copolymer system. The formation of the layered MoS2 was confirmed by XPS, Raman spectroscopy and high resolution transmission electron microscopy.

BLOCK COPOLYMERS CONTAINING A LOW-SURFACE-ENERGY BLOCK AND THEIR APPLICATIONS

This thesis reports the synthesis and/or applications of three types of block copolymers that each bear a low-surface-energy block. First, poly(dimethylsiloxane)-block-poly(2-cinnamoyloxyethyl acrylate) (PDMS-b-PCEA) was synthesized and characterized. Cotton coating using a micellar solution of this block copolymer yielded superhydrophobic cotton fabrics. X-ray photoelectron spectroscopy (XPS) and surface property analyses indicated that the PDMS block topped the polymer coating. Photocuring the cotton swatches crosslinked the underlying PCEA layer and yielded permanent coatings. More interestingly, hydrophilically patterned superhydrophobic cotton fabrics were produced using photolithography that allowed the crosslinking of the coating around irradiated fibers but the removal, by solvent extraction, of the coating on fibers that were not irradiated. Since water-based ink only permeated the uncoated regions, such patterned fabric was further used to print ink patterns onto substrates such as fabrics, cardboard, paper, wood, and aluminum foil. Then, another PDMS-based diblock copolymer poly(dimethylsiloxane)-block-poly(glycidyl methacrylate) (PDMS-b-PGMA) was prepared. Different from PCEA that photocrosslinked around cotton fibers, PGMA reacted with hydroxyl groups on cotton fiber surfaces to get covalently attached. Further, different PGMA chains crosslinked with each other. PDMS-b-PGMA-coated cotton fabrics have been used for oil-water separations. In addition, polymeric nanoparticles were grafted onto cotton fiber surface before PDMS-b-PGMA was used to cover the surfaces of the grafted spheres and the residual surfaces of the cotton fibers. These two types of fabrics, coated by the block copolymer alone or by the polymer nanospheres and then the copolymer, were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and water repellency analyses. A comprehensive comparative study was made of their performances in oil-water separation. Finally, a fluorinated ABC triblock copolymer poly(acrylic acid)-block-poly(2-cinnamoyloxyethyl methacrylate)-block-poly(2-perfluorooctylethyl methacrylate) (PAA-b-PCEMA-b-PFOEMA) was used to iii encapsulate air nanobubbles. The produced air nanobubbles were thermodynamically stable in water and were some 100 times more stable than commercially available perfluorocarbon-filled microbubbles under ultrasound. These nanobubbles, due to their small sizes and thus ability to permeate the capillary networks of organs and to reach tumors, may expand the applications of microbubbles in diagnostic ultrasonography and find new applications in ultrasound-regulated drug delivery.

Développement de matériaux à base de protéines extraites du byssus de la moule bleue Mytilus edulis

Le byssus est un amas de fibres que les moules produisent afin de s’ancrer aux surfaces immergées sous l’eau. Ces fibres sont pourvues de propriétés mécaniques impressionnantes combinant rigidité, élasticité et ténacité élevées. De plus, elles possèdent un comportement d’auto-guérison de leurs propriétés mécaniques en fonction du temps lorsque la contrainte initialement appliquée est retirée. Les propriétés mécaniques de ces fibres sont le résultat de l’agencement hiérarchique de protéines de type copolymère blocs riches en collagène et de la présence de métaux formant des liens sacrificiels réversibles avec certains acides aminés comme les DOPA et les histidines. Bien que cette fibre soit très intéressante pour la production de matériaux grâce à son contenu élevé en collagène potentiellement biocompatible, cette ressource naturelle est traitée comme un déchet par les mytiliculteurs. L’objectif de cette thèse était de valoriser cette fibre en extrayant les protéines pour générer une nouvelle classe de matériaux biomimétiques. Un hydrolysat de protéines de byssus (BPH) riche en acides aminés chargés, i.e. ~30 % mol, et permettant de former des films a pu être généré. Lorsque solubilisé à pH 10.5, le BPH forme un hydrogel contenant des structures en triple hélice de collagène et des feuillets β anti-parallèles intra- et inter-moléculaires. Suite à l’évaporation de l’eau, le film de BPH résultant est insoluble en milieu aqueux à cause des structures secondaires très stables agissant comme points de réticulation effectifs. Les propriétés mécaniques des films de BPH sont modulables en fonction du pH. Au point isoélectrique (pI = 4.5), les interactions électrostatiques entre les charges opposées agissent comme points de réticulation et augmentent la rigidité des films et leur contrainte à la rupture sans affecter la déformation à la rupture. À pH plus élevé ou plus bas que le pI, les performances mécaniques des films sont plus faibles à cause de la répulsion entre les groupements fonctionnels de même charge qui interagissent plutôt avec les molécules d’eau et causent le gonflement de la matrice protéique des films. Le BPH contenant un nombre élevé d’acides aminés chargés et réactifs, nous avons pu réticuler les films de manière covalente à l’aide d’EDC ou de glutaraldéhyde. Les propriétés mécaniques des films sont modulables en fonction de la concentration d’EDC utilisée lors de la réticulation ou en employant du glutaraldéhyde comme agent réticulant. Les films sont à la fois plus rigides et plus forts avec un degré de réticulation élevé, mais perdent leur extensibilité à mesure que les segments libres de s’étirer lors d’une traction deviennent entravés par les points de réticulation. La réticulation augmente également la résistance à la dégradation enzymatique par la collagénase, les films les plus fortement réticulés lui étant pratiquement insensibles. La spectroscopie infrarouge montre enfin que la réticulation entraîne une transition de feuillets β anti-parallèles inter-moléculaires vers des structures de type hélices de collagène/PPII hydratées. Des liens sacrificiels ont été formés dans les films de BPH par traitement au pI et/ou avec différents métaux, i.e. Na+, Ca2+, Fe3+, afin de moduler les propriétés mécaniques statiques et d’évaluer le rôle de ces traitements sur le comportement d’auto-guérison lors de tests mécaniques cycliques avec différents temps de repos. Plus la valence des ions métalliques ajoutés augmente, plus les propriétés mécaniques statiques affichent un module, une contrainte à la rupture et une ténacité élevés sans toutefois affecter la déformation à la rupture, confirmant la formation de liens sacrificiels. Les tests mécaniques cycliques montrent que les traitements au pI ou avec Ca2+ créent des liens sacrificiels ioniques réversibles qui mènent à un processus d’auto-guérison des performances mécaniques dépendant du pH. L’ajout de Fe3+ à différentes concentrations module les performances mécaniques sur un plus large intervalle et la nature plus covalente de son interaction avec les acides aminés permet d’atteindre des valeurs nettement plus élevées que les autres traitements étudiés. Le Fe3+ permet aussi la formation de liens sacrificiels réversibles menant à l’auto-guérison des propriétés mécaniques. Les spectroscopies Raman et infrarouge confirment que le fer crée des liaisons avec plusieurs acides aminés, dont les histidines et les DOPA. Les résultats dans leur ensemble démontrent que les films de BPH sont des hydrogels biomimétiques du byssus qui peuvent être traités ou réticulés de différentes façons afin de moduler leurs performances mécaniques. Ils pourraient ainsi servir de matrices pour des applications potentielles dans le domaine pharmaceutique ou en ingénierie tissulaire.

Salicaceae Endophytes: Growth Promotion Potential in Rice (Oryza sativa L.) and Maize (Zea mays L.) and Bio-Control of Plant Pathogen

Thesis (Ph.D.)--University of Washington, 2016-08

Rheology and Microfluidic flows of a cationic surfactant and hydrotropic salt mixture

Thesis (Ph.D.)--University of Washington, 2016-08

Physicochemical characterisation of protein ingredients prepared from milk by ultrafiltration or microfiltration for application in formulated nutritional products

Formulated food systems are becoming more sophisticated as demand grows for the design of structural and nutritional profiles targeted at increasingly specific demographics. Milk protein is an important bio- and techno-functional component of such formulations, which include infant formula, sports supplements, clinical beverages and elderly nutrition products. This thesis outlines research into ingredients that are key to the development of these products, namely milk protein concentrate (MPC), milk protein isolate (MPI), micellar casein concentrate (MCC), β-casein concentrate (BCC) and serum protein concentrate (SPC). MPC powders ranging from 37 to 90% protein (solids basis) were studied for properties of relevance to handling and storage of powders, powder solubilisation and thermal processing of reconstituted MPCs. MPC powders with ≥80% protein were found to have very poor flowability and high compressibility; in addition, these high-protein MPCs exhibited poor wetting and dispersion characteristics during rehydration in water. Heat stability studies on unconcentrated (3.5%, 140°C) and concentrated (8.5%, 120°C) MPC suspensions, showed that suspensions prepared from high-protein MPCs coagulated much more rapidly than lower protein MPCs. β-casein ingredients were developed using membrane processing. Enrichment of β-casein from skim milk was performed at laboratory-scale using ‘cold’ microfiltration (MF) at <4°C with either 1000 kDa molecular weight cut-off or 0.1 µm pore-size membranes. At pilot-scale, a second ‘warm’ MF step at 26°C was incorporated for selective purification of micellised β-casein from whey proteins; using this approach, BCCs with β-casein purity of up to 80% (protein basis) were prepared, with the whey protein purity of the SPC co-product reaching ~90%. The BCC ingredient could prevent supersaturated solutions of calcium phosphate (CaP) from precipitating, although the amorphous CaP formed created large micelles that were less thermo-reversible than those in CaP-free systems. Another co-product of BCC manufacture, MCC powder, was shown to have superior rehydration characteristics compared to traditional MCCs. The findings presented in this thesis constitute a significant advance in the research of milk protein ingredients, in terms of optimising their preparation by membrane filtration, preventing their destabilisation during processing and facilitating their effective incorporation into nutritional formulations designed for consumers of a specific age, lifestyle or health status

Extração de ácidos triterpénicos a partir da casca de eucalipto utilizando líquidos iónicos

Os recursos renováveis têm sido um forte alvo de investigação científica nos últimos anos, onde o aproveitamento de biomassa e seus resíduos para a obtenção de compostos de valor acrescentado, combustíveis e energia têm sido abordados no conceito de biorrefinaria integrada. As indústrias de papel geram quantidades significativas de resíduos, nomeadamente a casca de eucalipto que é atualmente queimada para a geração de energia. De forma a valorizar este resíduo, a presente dissertação teve como objetivo extrair compostos triterpénicos, a partir casca externa de Eucalyptus globulus, utilizando solventes de extração alternativos - soluções aquosas de líquidos iónicos (LIs) – para substituir os solventes orgânicos actualmente utilizados. Os ácidos triterpénicos apresentam um elevado interesse na indústria cosmética, farmacêutica e alimentar graças às suas propriedades antiinflamatórias, antitumurais, entre outras. Primeiramente, caracterizou-se a casca externa de Eucalyptus globulus, e posteriormente procedeu-se ao estudo de solubilidade de ácido ursólico (AU, utilizado como molécula modelo) a 25 ºC em soluções aquosas de LIs e surfactantes de modo a selecionar os solventes mais eficientes para a extração. Deste trabalho conclui-se que a capacidade surfactante das soluções aquosas de LIs, particularmente [C4C1im][C8H17SO4], [C16C1im]Cl e [C14C1im]Cl, desempenham um papel fundamental para a solubilização de AU em água, podendo aumentar quase 16000 vezes a sua solubilidade, e permitiu recuperar cerca de 89% deste composto com simples adição de água como anti-solvente. Por fim, compararam-se as quantidades de ácidos triterpénicos extraídas a partir da casca de eucalipto com soluções aquosas de [C14C1im]Cl, metanol e com extração em soxhlet com diclorometano.

Obtenção de um hidrogel proveniente de proteínas da corvina (micropogonias furnieri) e solubilização das proteínas fibrosas residuais

Com o aumento na captura de pescado e da poluição do meio ambiente, esta-se à margem de exceder a estimativa do limite da sustentabilidade, e obviamente isto faz com se utilize os recursos marítimos com mais inteligência e precaução. Aplicando tecnologia enzimática ou química é possível recuperar as proteínas do processamento do pescado, produzindo hidrolisados e isolados protéicos. Uma grande quantidade de proteínas insolúveis está disponível em escamas, peles e ossos, subprodutos do processamento do pescado, que podem ser solubilizadas através de fungos e bactérias. Utilizando isolados protéicos é possível obter biopolímeros, estes têm chamado a atenção nos últimos anos, pois são biodegradáveis, não-tóxicos e geralmente biocompatíveis. Os hidrogéis protéicos são polímeros que podem absorver uma quantidade de água a partir de 10 até centenas de vezes o seu peso seco. O objetivo deste trabalho foi desenvolver um hidrogel protéico, com propriedades superabsorventes, a partir das proteínas solúveis e insolúveis da corvina (Micropogonias furnieri). Para a produção dos hidrolisados a partir das proteínas solúveis foi utilizado processo enzimático (Alcalase e Flavourzyme) e químico (solubilização ácida e alcalina). Nos processos de solubilização das proteínas insolúveis foram utilizados microrganismos (bactérias e fungos). Tanto as bactérias como os fungos avaliados apresentaram capacidade de solubilizar as proteínas insolúveis presentes nos resíduos (escamas, ossos, cartilagens e outros). A bactéria que atingiu a maior atividade proteolítica foi a Bacillus velesensis (47,56 U mL-1) e o fungo foi o Penicillium sp. (E20) (31,20 U mL-1). Para a produção dos hidrogéis, foram utilizados isolados protéicos provenientes de solubilização ácida ou alcalina, produzidos a partir de resíduos da industrialização de pescado, modificados quimicamente com dianidrido etilenodiamino tetraacético (EDTAD) e adicionados de agente de ligação cruzada (glutaraldeído). Algumas proteínas modificadas ainda foram submetidas a tratamento com etanol. Foram realizadas análise estrutural das proteínas modificadas e estudo da capacidade de retenção de água dos hidrogéis assim obtidos. Os hidrogéis produzidos apresentaram alta capacidade de retenção de água. A máxima absorção de água foi alcançada pelo hidrogel ácido sem o tratamento com etanol foi de 103,25 gágua/ggel seco, enquanto que a mesma amostra tratada com etanol alcançou 216,05 gágua/ggel seco. Os hidrogéis produzidos podem ser utilizados em diversas indústrias, tais como, farmacêutica, alimentícia, médica, agroindústria, entre outras, que necessitem de hidrogéis com alta capacidade de retenção de água.

Avaliação da atividade antimicrobiana de filmes protéicos a base de anchoita (engraulis anchoita) incorporados com ácidos orgânicos.

Os filmes são produzidos a partir de macromoléculas, que podem ser utilizados como embalagem, como os polissacarídeos, lipídeos e proteínas. As proteínas se destacam dos demais, pois possuem uma estrutura com 20 monômeros diferentes, que confere um amplo potencial de ligações intermoleculares. A incorporação de agentes ativos em filmes é uma alternativa como embalagem, para inibir ou retardar a multiplicação de microrganismos patógenos e deteriorantes em alimentos. O objetivo deste trabalho foi avaliar a atividade antimicrobiana de filmes à base de isolado protéico de anchoita (Engraulis anchoita) – IPA adicionados de ácidos orgânicos. Para tanto, foi elaborado o IPA, pela solubilização alcalina da proteína e precipitação no ponto isoelétrico a partir de carne mecanicamente separada. O IPA foi avaliado quanto a sua composição proximal, aminoacídica e por DSC. A solução formadora dos filmes foi elaborada a partir de IPA, água, glicerol e hidróxido de sódio. As formulações dos filmes foram elaboradas segundo um planejamento fatorial 23 . Foram avaliadas as propriedades físico-químicas de resistência a tração (RT) e elongação (E); espessura, solubilidade e permeabilidade ao vapor de água (PVA); a diferença de cor (∆E*) e opacidade (Y) e microscopia eletrônica de varredura (MEV) de filmes à base de IPA. Os filmes com diferentes concentrações de ácido sórbico (AS) ou ácido benzóico (AB) foram desenvolvidos a partir da condição cujo as propriedades físico-químicas foram as melhores, sendo comparados aos filmes controles. Estes, foram avaliados quanto a sua atividade antimicrobiana frente aos microrganismos Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus e Salmonella Enteritidis pelo método de difusão em disco, além das propriedades físico-químicas, MEV e FT-IV. Os filmes com maior atividade antimicrobiana e os filmes controle foram aplicados sobre carne bovina, inoculados com os microrganismos inibidos no método de difusão em disco e armazenados a 5°C. Estes, foram avaliados a cada 2 dias durante 12 dias de armazenamento, pela método de contagem em gotas. O IPA apresentou 88,8% de proteína e 53,3% de aminoácidos polares e temperatura de desnaturação de 62,2°C. A espessura, PVA, ∆E* e Y dos filmes não foram afetados pelas variáveis estudadas no experimento. A menor solubilidade e maior RT dos filmes ocorreram em baixa concentração de IPA, glicerol e tratamento térmico, mas a E aumentou com o acréscimo dessas variáveis. As MEV das superfícies dos filmes foram homogêneas, para aqueles com leve tratamento térmico. O aumento da concentração de AS e AB na faixa de 0,50 a 1,50% resultou na diminuição da RT e aumento da E, solubilidade, ∆E* e Y. Houve mudança da organização molecular e interações intermoleculares entre as moléculas de IPA e AB testados pela avaliação do FT-IV. As MEV revelaram microporos em filmes com 1,50% de AS, o que resultou em filmes com menor homogeneidade. A maior atividade antimicrobiana foi verificada nos filmes com 1,50% de AS e AB frente a E. coli O157:H7, L. monocytogenes e S. Enteritidis. Estes filmes foram aplicados sobre carne bovina inoculada com E. coli O157:H7 e L. monocytogenes. Os filmes de AS frente a E. coli O157:H7 e L. monocytogenes apresentaram uma redução de 5 e 4 log UFC.g-1, respectivamente, em relação ao filme controle. O efeito do AB frente a estas bactérias, apresentou uma redução de 6 e 5 log UFC.g-1, ao final do 12° dia de armazenamento, respectivamente. Os filmes elaborados à base de IPA, adicionados de AS ou AB podem ser eficazes contra os patógenos alimentares testados.

Produção de isolado proteico proveniente de subprodutos da indústria de aves em diferentes escalas

A indústria de aves brasileira destaca-se economicamente, onde um total de 12,3 milhões de toneladas foi produzido no país em 2013. Esta produção em larga escala gera considerável volume de subprodutos, chegando até 35% da ave viva. Tais resíduos são convertidos, por processos tradicionais, em produtos de baixo valor comercial, como por exemplo, farinhas. O processo de variação de pH constitui um importante processo alternativo de obtenção de proteínas com melhores características funcionais e nutricionais. Estudar as variáveis do processo, efetuando aumento dimensional, é fundamental para aplicação das tecnologias desenvolvidas no laboratório e posterior definição final de processos industriais. A produção de isolados proteicos seria uma tecnologia atraente no aproveitamento de subprodutos da indústria de frango, convertendo-os em uma ótima fonte proteica, agregando valor ao produto obtido. Este trabalho teve por objetivo produzir isolados proteicos em diferentes escalas, utilizando subprodutos não comestíveis da indústria de frango. Foi estudada a solubilização das proteínas da matéria-prima (MP) para definir pHs de solubilização e de precipitação isoelétrica. A curva apontou um pH alcalino de 11,0 para etapa de solubilização e de 5,25 para etapa de precipitação proteica. As proteínas obtidas foram caracterizadas quanto sua composição proximal, índice de acidez (IA), índice de peróxidos (IP) e substâncias reativas ao ácido tiobarbitúrico (TBARS) além de propriedades funcionais de solubilidade, capacidade de retenção de água (CRA) e capacidade de retenção de óleo (CRO); e nutricionais de digestibilidade proteica. Comparativamente foram analisadas farinhas de vísceras comerciais nos mesmos parâmetros. Um aumento de escala do processo foi realizado e avaliado pelas mesmas respostas do produto da escala laboratorial. Foi obtido um teor proteico de 82 e 85% em escala laboratorial e aumento de escala, respectivamente, e também uma redução lipídica de 75%, e de cinzas de 85%, em relação à MP. A composição proximal das farinhas analisadas ficou entre 67-72% para proteína bruta, 17-22% para lipídios e 9-15% para cinzas. O IA, apresentou valores de 2,2 e 3,1 meq/g de isolado e de 1,6 a 2,0 meq/g de farinha. Já para IP, obteve-se valores de 0,003 a 0,005 meq/g de isolado e de 0,002 a 0,049 meq/g de farinha. Os índices de TBARS apontaram valores de 0,081 e 0,214 mg MA/g de isolado e 0,041 a 0,128 mg MA/g de farinha. A solubilidade das proteínas do isolado apontou 84 e 81% em pH 3 e 11 respectivamente e de 5% em pH 5, já para farinhas variaram de 22 a 31% em pH de 3 a 11. A CRA obtida no isolado foi 3,1 a 16,5 g água/g de proteína e de 3,8 a 10,9 g água/g de proteína nas farinhas. A CRO ficou em 4,2 mL de óleo/g de proteína do isolados e 2,6 mL de óleo/g de proteína da farinhas. Os isolados proteicos apresentaram 92 e 95% de digestibilidade das proteínas, em comparação aos 84% das farinhas comerciais. Os índices acumulados e apresentados neste trabalho concluíram que foi possível aumentar a escala do processo de variação de pH, sem perder qualidade nos índices físico-químicos e de digestibilidade proteica.

Indole acetic acid and ACC deaminase fromendophytic bacteria improves the growth of Solanum lycopersicum

Background: Endophytic bacteria are ubiquitous in all plant species contributing in host plant\'s nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains. Results: PCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg-1 h-1) and acid phosphatase activity (8.4 ± 1.2 nM mg-1 min-1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS–MS. The analysis showed that LK14 produced the highest (8.7 μM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum , where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants. Conclusion: The study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands.