Spontaneous and stimulated light emission due to radiative recombination in forward biased lead telluride P-N junctions

Since the discovery in 1962 of laser action in semiconductor diodes made from GaAs, the study of spontaneous and stimulated light emission from semiconductors has become an exciting new field of semiconductor physics and quantum electronics combined. Included in the limited number of direct-gap semiconductor materials suitable for laser action are the members of the lead salt family, i.e . PbS, PbSe and PbTe. The material used for the experiments described herein is PbTe . The semiconductor PbTe is a narrow band- gap material (E_g = 0.19 electron volt at a temperature of 4.2°K). Therefore, the radiative recombination of electron-hole pairs between the conduction and valence bands produces photons whose wavelength is in the infrared (λ ≈ 6.5 microns in air).

The p-n junction diode is a convenient device in which the spontaneous and stimulated emission of light can be achieved via current flow in the forward-bias direction. Consequently, the experimental devices consist of a group of PbTe p-n junction diodes made from p –type single crystal bulk material. The p - n junctions were formed by an n-type vapor- phase diffusion perpendicular to the (100) plane, with a junction depth of approximately 75 microns. Opposite ends of the diode structure were cleaved to give parallel reflectors, thereby forming the Fabry-Perot cavity needed for a laser oscillator. Since the emission of light originates from the recombination of injected current carriers, the nature of the radiation depends on the injection mechanism.

The total intensity of the light emitted from the PbTe diodes was observed over a current range of three to four orders of magnitude. At the low current levels, the light intensity data were correlated with data obtained on the electrical characteristics of the diodes. In the low current region (region A), the light intensity, current-voltage and capacitance-voltage data are consistent with the model for photon-assisted tunneling. As the current is increased, the light intensity data indicate the occurrence of a change in the current injection mechanism from photon-assisted tunneling (region A) to thermionic emission (region B). With the further increase of the injection level, the photon-field due to light emission in the diode builds up to the point where stimulated emission (oscillation) occurs. The threshold current at which oscillation begins marks the beginning of a region (region C) where the total light intensity increases very rapidly with the increase in current. This rapid increase in intensity is accompanied by an increase in the number of narrow-band oscillating modes. As the photon density in the cavity continues to increase with the injection level, the intensity gradually enters a region of linear dependence on current (region D), i.e. a region of constant (differential) quantum efficiency.

Data obtained from measurements of the stimulated-mode light-intensity profile and the far-field diffraction pattern (both in the direction perpendicular to the junction-plane) indicate that the active region of high gain (i.e. the region where a population inversion exists) extends to approximately a diffusion length on both sides of the junction. The data also indicate that the confinement of the oscillating modes within the diode cavity is due to a variation in the real part of the dielectric constant, caused by the gain in the medium. A value of τ ≈ 10^-9 second for the minority- carrier recombination lifetime (at a diode temperature of 20.4°K) is obtained from the above measurements. This value for τ is consistent with other data obtained independently for PbTe crystals.

Data on the threshold current for stimulated emission (for a diode temperature of 20. 4°K) as a function of the reciprocal cavity length were obtained. These data yield a value of J’_th = (400 ± 80) amp/cm² for the threshold current in the limit of an infinitely long diode-cavity. A value of α = (30 ± 15) cm^-1 is obtained for the total (bulk) cavity loss constant, in general agreement with independent measurements of free- carrier absorption in PbTe. In addition, the data provide a value of n_s ≈ 10% for the internal spontaneous quantum efficiency. The above value for n_s yields values of t_b ≈ τ ≈ 10^-9 second and t_s ≈ 10^-8 second for the nonradiative and the spontaneous (radiative) lifetimes, respectively.

The external quantum efficiency (n_d) for stimulated emission from diode J-2 (at 20.4° K) was calculated by using the total light intensity vs. diode current data, plus accepted values for the material parameters of the mercury- doped germanium detector used for the measurements. The resulting value is n_d ≈ 10%-20% for emission from both ends of the cavity. The corresponding radiative power output (at λ = 6.5 micron) is 120-240 milliwatts for a diode current of 6 amps.

Multi-channel 2-D pattern transfer model based on imaging optics for submarine laser uplink communication

An optical communication scheme of 2-D pattern transfer based on imaging optics for submarine laser uplink communication (SLUC) is suggested. Unlike the methods aiming at avoiding neighboring crosstalk used in traditional multi-channel optical beam transferring, we make full use of the overlapping of each spreading beam other than controlling divergence effect of each beam to avoid interference noise. The apparent parameters have been introduced to simplify theoretical analysis of optical pattern transfer problem involving underwater condition, with the help of which the complex beam propagation inside two kinds of mediums can be easily reduced to brief beam transfer only inside air medium. In this paper, optical transmission path and receiver terminal optics geometry have been described in detail. The link range equation and system uplink performance analysis have also been given. At last, results of a proof-of-concept experiment indicate good feasibility of the proposed SLUC model. © 2007 Elsevier GmbH. All rights reserved.

Technique for diagnosing x-ray laser beam quality by use of the moire signal

We present what we believe is a novel technique based on the moire effect for fully diagnosing the beam quality of an x-ray laser. Using Fresnel diffraction theory, we investigated the intensity profile of the moire pattern when a general paraxial beam illuminates a pair of Ronchi gratings in the quasi-far field. Two formulas were derived to determine the beam quality factor M-2 and the effective radius of curvature R-e from the moire pattern. On the basis of the results, the far-field divergence, the waist location, and the radius can be calculated further. Finally, we verified the approach by use of numerical simulation. (C) 1999 Optical Society of America [S0740-3232(99)01502-1].

Pure-phase plates for super-Gaussian focal-plane irradiance profile generations of extremely high order

A set of recursive formulas for diffractive optical plates design is described. The pure-phase plates simulated by this method homogeneously concentrate more than 96% of the incident laser energy in the desired focal-plane region. The intensity focal-plane profile fits a lath-order super-Gaussian function and has a nearly perfect flat top. Its fit to the required profile measured in the mean square error is 3.576 x 10(-3). (C) 1996 Optical Society of America

Beam smoothing by lens array with spectral dispersion

A scheme of combining technology of lens array (LA) and smoothing by spectral dispersion (SSD) is introduced to improve the irradiation uniformity in laser fusion based on the earlier works on LA. The feasibility of the scheme is also analyzed by numerical simulation. It shows that a focal pattern with flat-top and sharp-edge profile could be obtained, and the irradiation nonuniformity can fall down from 14% with only LA to 3% with both SSD and LA. And this smoothing scheme is depended less on the incidence comparing to other smoothing methods. The preliminary experiment has demonstrated its effectiveness. (c) 2006 Elsevier B.V. All rights reserved.

Smoothing the side lobes of a focused pattern by spectral dispersion in the broadband laser

Starting from the Huygens-Fresnel diffraction integral, the propagation equations of a broadband laser passing through a dispersive lens and a dispersive wedge are derived. Smoothing effect on the side lobes of the focused pattern is achieved as the broadband laser passes through the lens because of the spectral dispersion of the lens. By inserting a dispersive wedge behind the lens, better smoothing effect is realized because a relative position shift between focused patterns of different frequency components is generated due to the spectral dispersion of the wedge. Smoothing effect on the side lobe is obtained even with small bandwidth of the broadband laser as the wedge is used. (c) 2006 Elsevier GmbH. All rights reserved.

Bertso transformation with pattern-based sampling

This paper presents a method to generate new melodies, based on conserving the semiotic structure of a template piece. A pattern discovery algorithm is applied to a template piece to extract significant segments: those that are repeated and those that are transposed in the piece. Two strategies are combined to describe the semiotic coherence structure of the template piece: inter-segment coherence and intra-segment coherence. Once the structure is described it is used as a template for new musical content that is generated using a statistical model created from a corpus of bertso melodies and iteratively improved using a stochastic optimization method. Results show that the method presented here effectively describes a coherence structure of a piece by discovering repetition and transposition relations between segments, and also by representing the relations among notes within the segments. For bertso generation the method correctly conserves all intra and inter-segment coherence of the template, and the optimization method produces coherent generated melodies.

Potenciais interações medicamentosas com dano grave e sua relação com o aprazamento estabelecido por enfermeiros

Trata-se de estudo multicêntrico, com revisão retrospectiva de prontuário, que teve como objeto a associação entre o aprazamento de medicações intravenosas realizadas por enfermeiros e as potenciais interações medicamentosas (PIM) graves, encontradas em prescrições de pacientes críticos adultos hospitalizados. Os objetivos foram: a) apresentar os grupos medicamentosos e medicamentos prevalentes em cada Unidade de Tratamento Intensivo (UTI) pesquisada; b) descrever o perfil do aprazamento dos medicamentos intravenosos em cada UTI pesquisada; e, c) analisar a frequência das potenciais interações medicamentosas graves favorecidas pelo aprazamento feito por enfermeiros. Para coleta de dados foi utilizado um instrumento que contemplou o nome do medicamento, a dose, a via, a frequência de administração e os horários aprazados pelo enfermeiro, dando origem a um imenso banco de dados. Os dados foram coletados em 3 UTIs conveniadas ao SUS e pertencentes à Rede Sentinela. O levantamento das PIM foi feito de prescrição a prescrição, pareando-se todos os medicamentos intravenosos conforme critérios de inclusão, obtendo-se assim uma lista com as interações encontradas. As PIM foram identificadas nas bases Micromedex Drugs-Reax System.12 e Drugs.com. Foi encontrada uma chance quase três vezes maior (OR: 2,96) de PIM em prescrições com mais de 5 medicamentos. Às 6h foi encontrada nas UTIs A e B a maior chance de PIM. Na UTI C não foi encontrada prevalência nem OR significativa, assim como o número de doses comprometidas com PIM foi o menor entre todas as UTIs. Houve predomínio de medicamentos que atuam no sistema digestivo (31,99%), com destaque para ranitidina (44,08%). As UTI A e B seguem um mesmo padrão no que diz respeito a acumular o aprazamento, preferencialmente em quatro horários: 14h, 18h, 22h e 6h. A UTI C distribui seu aprazamento por nove horários, inclusive no horário de visitas (16h) e no início de plantão (08h e 20h). Na UTI A e B predominaram aprazamentos noturnos; na UTI C foram tarde e noite, sugerindo uma rotina organizada de acordo com o processo de trabalho de médicos, enfermagem e farmácia. Foram encontrados 47 PIM graves nos horários prevalentes. A UTI A apresentou o maior número de PIM graves (n=32). Destacam-se cinco medicamentos que, repetidamente, foram aprazados associados em PIM grave: haloperidol, metoclopramida, tramadol, furosemida e prometazina. Conclui-se que a rotina de atividades na UTI favorece o aprazamento padronizado e concentrado em poucos horários, logo a ocorrência de PIM graves, desconsiderando assim os aspectos farmacocinéticos e farmacodinâmicos dos medicamentos em uso concomitante.

Application of Entropy and Fractal Dimension Analyses to the Pattern Recognition of Contaminated Fish Responses in Aquaculture

The objective of the work was to develop a non-invasive methodology for image acquisition, processing and nonlinear trajectory analysis of the collective fish response to a stochastic event. Object detection and motion estimation were performed by an optical flow algorithm in order to detect moving fish and simultaneously eliminate background, noise and artifacts. The Entropy and the Fractal Dimension (FD) of the trajectory followed by the centroids of the groups of fish were calculated using Shannon and permutation Entropy and the Katz, Higuchi and Katz-Castiglioni's FD algorithms respectively. The methodology was tested on three case groups of European sea bass (Dicentrarchus labrax), two of which were similar (C1 control and C2 tagged fish) and very different from the third (C3, tagged fish submerged in methylmercury contaminated water). The results indicate that Shannon entropy and Katz-Castiglioni were the most sensitive algorithms and proved to be promising tools for the non-invasive identification and quantification of differences in fish responses. In conclusion, we believe that this methodology has the potential to be embedded in online/real time architecture for contaminant monitoring programs in the aquaculture industry.

Gradient force pattern, focal shift, and focal switch in an apodized optical system

In this paper, the evolution of the gradient force pattern, focal shift, and focal switch induced by a three-portion pure phase-shifting apodizer is numerically investigated in detail. The results show that the proposed apodizer may induce tunable gradient force on the particles in the focal region, focal shift, and focal switch. By adjusting the geometrical parameters of the phase-shifting apodizer, multiple traps may occur with changeable distance between them, and the shape of the optical trap also evolves evidently. More interestingly, for certain geometrical parameters of the proposed apodizer, by changing the phase shift of inner annular portion, the considerable focal shift may occur with focal switch accompanying, which is discussed to show that this kind of apodizer may be a very promising method of transporting trapped particles. © 2005 Elsevier GmbH. All rights reserved.

Understanding Density in an Uneven City, Santiago de Chile: Implications for Social and Environmental Sustainability

Efforts to promote infill development and to raise densities are growing in many cities around the world as a way to encourage urban sustainability. However, in cities polarized along socio-economic lines, the benefits of densification are not so evident. The aim of this paper is to discuss some of the contradictions of densification in Santiago de Chile, a city characterized by socio-spatial disparities. To that end, we first use regression analysis to explain differences in density rates within the city. The regression analysis shows that dwelling density depends on the distance from the city center, socioeconomic conditions, and the availability of urban attributes in the area. After understanding the density profile, we discuss the implications for travel and the distribution of social infrastructures and the environmental services provided by green areas. While, at the metropolitan scale, densification may favor a more sustainable travel pattern, it should be achieved by balancing density rates and addressing spatial differences in the provision of social services and environmental amenities. We believe a metropolitan approach is essential to correct these spatial imbalances and to promote a more sustainable and socially cohesive growth pattern.

Avaliação de fatores de risco relacionados com aterosclerose subclínica em mulheres hipertensas

A aterosclerose e suas complicações são a principal causa de morbidade e mortalidade no mundo ocidental. O aumento da espessura da camada médio-intimal da carótida está associado com risco para doenças cardiovasculares, pois representa um marcador de aterosclerose subclínica, podendo ser detectada precocemente em indivíduos assintomáticos. O objetivo desse estudo foi identificar variáveis clínicas e nutricionais associadas com a aterosclerose subclínica em mulheres hipertensas. Estudo transversal envolvendo uma amostra de conveniência composta por 116 mulheres hipertensas entre 40 e 65 anos. Dados clínicos, como pressão arterial (PA) sistólica e diastólica, história de tabagismo, atividade física, uso de medicamentos foram coletados; foi feita a análise do perfil lipídico, glicemia e proteína C reativa (PCR); a avaliação dietética obtida pelo Recordatório de 24 horas e pelo Registro de três dias. A espessura médio-intimal (EMI) de carótidas foi realizada pelo aparelho de ultrassonografia. As pacientes foram divididas em dois grupos, de acordo com os valores da espessura médio-intimal de carótidas: EMI 0,9mm ou EMI > 0,9mm. Houve diferença significativa entre os grupos em relação à idade (50,846,62 vs 53,547,13; p=0,044), PA sistólica (134,5216,54 vs 142,9821,47; p=0,020), pressão de pulso (PP) (49,3611,03 vs 60,15 17,77; p<0,001), HDL (48,988,54 vs 44,057,45; p=0,004) e PCR (2,311,21 vs 3,051,34; p=0,016). Não houve diferença significativa em relação aos parâmetros antropométricos, exceto em relação à reactância (65,199,69 vs 61,447,88; p=0,036), avaliada pela bioimpedância elétrica (BIA). Quanto ao padrão de consumo alimentar, somente o consumo de gordura monoinsaturada foi diferente entre os grupos, sendo o maior consumo no grupo com menor valor de EMI (7,882,09 vs 7,022,06; p=0,031). Não houve diferença em relação à frequência de tabagismo e atividade física. Quando foi feita a análise de correlação da amostra, foi encontrada uma correlação entre a EMI de carótidas e idade (r=0,25; p=0,0067), PAS (r=0,19; p=0,0086); PP (r=0,30; p=0,0009), LDL (r=0,19; p=0,0434), assim como com gordura monoinsaturada (r= -0,25; p=0,0087), PCR (r=0,31; p=0,007) e HDL (r=-0,33; p=0,0004), porém apenas as variáveis HDL, PCRus e pressão de pulso mostraram ser preditoras independentes da EMI de carótida após feita uma análise de regressão linear multivariada. A proteína C reativa, HDL colesterol e pressão de pulso são importantes preditores independentes de aterosclerose subclínica.