Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Avaliação da capacidade de adsorção do CO2 em zeólita 12X com gases sintéticos e originados da pirólise do lodo de esgoto

This work depicts a study of the adsorption of carbon dioxide on zeolite 13X. The activities were divided into four stages: study batch adsorption capacity of the adsorbent with synthetic CO2 (4%), fixed bed dynamic evaluation with the commercial mixture of gases (4% CO2, 1.11% CO, 1 2% H2, 0.233% CH4, 0.1% C3, 0.0233% C4 argon as inert closing balance), fixed bed dynamic modeling and evaluation of the breakthrough curve of CO2 originated from the pyrolysis of sewage sludge. The sewage sludge and the adsorbent were characterized by analysis TG / DTA, SEM, XRF and BET. Adsorption studies were carried out under the following operating conditions: temperature 40 °C (for the pyrolysis of the sludge T = 600 °C), pressures of 0.55 to 5.05 bar (batch process), flow rate of the gaseous mixture between 50 - 72 ml/min and the adsorbent masses of 10, 15 and 20 g (fixed bed process). The time for the adsorption batch was 7 h and on the fixed bed was around 180 min. The results of this study showed that in batch adsorption process step with zeolite 13X is efficient and the mass of adsorbed CO2 increases with the increases pressure, decreases with temperature increases and rises due the increase of activation temperature adsorbent. In the batch process were evaluated the breakthrough curves, which were compared with adsorption isotherms represented by the models of Langmuir, Freündlich and Toth. All models well adjusted to the experimental points, but the Langmuir model was chosen in view of its use in the dynamic model does not have implications for adsorption (indeterminacy and larger number of parameters such as occurred with others) in solving the equation. In the fixed bed dynamic study with the synthetic gas mixture, 20 g of mass adsorbent showed the maximum adsorption percentage 46.7% at 40 °C temperature and 50 mL/min of flow rate. The model was satisfactorily fitted to the three breakthrough curves and the parameters were: axial dispersion coefficient (0.0165 dm2/min), effective diffusivity inside the particle (dm2/min 0.0884) and external transfer coefficient mass (0.45 dm/min). The breakthrough curve for CO2 in the process of pyrolysis of the sludge showed a fast saturation with traces of aerosols presents in the gas phase into the fixed bed under the reaction process

Recuperação e purificação de quitosanases usando adsorção em leito expandido com streamline DEAE com modelagem e simulação usando redes neurais

Expanded Bed Adsorption (EBA) is an integrative process that combines concepts of chromatography and fluidization of solids. The many parameters involved and their synergistic effects complicate the optimization of the process. Fortunately, some mathematical tools have been developed in order to guide the investigation of the EBA system. In this work the application of experimental design, phenomenological modeling and artificial neural networks (ANN) in understanding chitosanases adsorption on ion exchange resin Streamline® DEAE have been investigated. The strain Paenibacillus ehimensis NRRL B-23118 was used for chitosanase production. EBA experiments were carried out using a column of 2.6 cm inner diameter with 30.0 cm in height that was coupled to a peristaltic pump. At the bottom of the column there was a distributor of glass beads having a height of 3.0 cm. Assays for residence time distribution (RTD) revelead a high degree of mixing, however, the Richardson-Zaki coefficients showed that the column was on the threshold of stability. Isotherm models fitted the adsorption equilibrium data in the presence of lyotropic salts. The results of experiment design indicated that the ionic strength and superficial velocity are important to the recovery and purity of chitosanases. The molecular mass of the two chitosanases were approximately 23 kDa and 52 kDa as estimated by SDS-PAGE. The phenomenological modeling was aimed to describe the operations in batch and column chromatography. The simulations were performed in Microsoft Visual Studio. The kinetic rate constant model set to kinetic curves efficiently under conditions of initial enzyme activity 0.232, 0.142 e 0.079 UA/mL. The simulated breakthrough curves showed some differences with experimental data, especially regarding the slope. Sensitivity tests of the model on the surface velocity, axial dispersion and initial concentration showed agreement with the literature. The neural network was constructed in MATLAB and Neural Network Toolbox. The cross-validation was used to improve the ability of generalization. The parameters of ANN were improved to obtain the settings 6-6 (enzyme activity) and 9-6 (total protein), as well as tansig transfer function and Levenberg-Marquardt training algorithm. The neural Carlos Eduardo de Araújo Padilha dezembro/2013 9 networks simulations, including all the steps of cycle, showed good agreement with experimental data, with a correlation coefficient of approximately 0.974. The effects of input variables on profiles of the stages of loading, washing and elution were consistent with the literature

Correlação entre leituras de clorofila e níveis de nitrogênio aplicados em feijoeiro

Foram realizados dois ensaios, sendo um em solução nutritiva e outro em solo, utilizando seis níveis de nitrogênio (28, 56, 84, 112, 140 e 168 mg/L de N) a fim de ajustar as leituras diretas, feitas nas folhas de feijoeiro, com um clorofilômetro (Minolta SPAD-501), aos níveis crescentes de nitrogênio e ao seu teor nas folhas. Avaliaram-se os parâmetros: área foliar; massas dos materiais verde e seco; teor de clorofila; produção de grãos e teores de N, Ca, Mg e S. Todos esses dados, mais as leituras do aparelho, foram correlacionados entre si e com os níveis de N aplicados. As correlações positivas entre as leituras e os níveis de N fornecidos (R = 0,86) e entre as leituras e os teores de N nas folhas (R = 0,75) indicam que há perspectivas favoráveis quanto ao uso desse equipamento para detectar deficiências de nitrogênio em feijoeiro.

Efeito da compactação do solo no desenvolvimento aéreo e radicular de cultivares de milho

O objetivo deste trabalho foi avaliar o desenvolvimento aéreo e radicular de duas cultivares de milho (Zea mays L.), em solo submetido a quatro níveis de compactação. Utilizou-se um Latossolo Vermelho-Escuro distroférrico de textura média, em vasos montados com anéis de PVC sobrepostos, com diâmetro interno de 14,5 cm e altura de 35 cm. Os níveis de compactação utilizados em subsuperfície foram caracterizados pelas densidades do solo de 1,28, 1,42, 1,56 e 1,69 Mg m³. As cultivares de milho foram o híbrido AG-5011 e a variedade Sol da Manhã. Aos 40 dias após a emergência das plantas, determinaram-se as massas da matéria seca da parte aérea e das raízes, a densidade do comprimento radicular e o diâmetro médio radicular. A compactação do solo comprometeu o desenvolvimento das plantas de milho híbrido e da variedade na mesma intensidade. Apesar de alterar a distribuição do sistema radicular ao longo do perfil do solo, o impedimento físico em subsuperfície não diminuiu a produção total de raízes de milho. O diâmetro médio radicular apresentou alta correlação com o crescimento de raízes no solo compactado. O sistema radicular do milho não é capaz de romper uma camada compactada de solo com resistência mecânica da ordem de 1,4 MPa.

Crescimento aéreo e radicular da soja e de plantas de cobertura em camadas compactadas de solo

O cultivo de plantas de cobertura com sistema radicular vigoroso em rotação de culturas pode melhorar a qualidade física de solos compactados. O objetivo deste trabalho foi avaliar o crescimento aéreo e radicular da soja e de cinco espécies utilizadas como plantas de cobertura de verão (guandu, guandu anão, mucuna preta, labe labe e crotalária juncea), em solo submetido a três níveis de compactação em subsuperfíce. Utilizou-se um Nitossolo Vermelho argiloso em vasos montados com anéis de PVC sobrepostos, com diâmetro interno de 20 cm e altura de 50 cm. A camada compactada localizada de 20-30 cm de profundidade foi caracterizada pelas densidades do solo de 1,13, 1,34 e 1,56 g cm-3 e 0,26, 0,66 e 1,98 MPa de impedância mecânica, respectivamente. Aos 60 dias da emergência das plantas, determinaram-se as massas da matéria seca da parte aérea e das raízes, a densidade do comprimento radicular e o diâmetro médio radicular. Apesar de alterar a distribuição do sistema radicular ao longo do perfil do solo, o impedimento físico em subsuperfície não diminuiu a produção total de raízes da soja e dos adubos verdes, com exceção da crotalária juncea. A mucuna preta foi a leguminosa mais tolerante e a soja a mais sensível à compactação do solo. O sistema radicular da crotalária juncea apresentou potencial de formação de bioporos compatível ao da mucuna preta, apesar de ter sido relativamente mais sensível à compactação do solo. O diâmetro médio das raízes da soja e da crotalária juncea apresentou correlação significativa com o crescimento radicular dentro da camada de solo compactado.

Obtenção de novos derivados de ß-naftol e cardanol hidrogenado e avaliação dos seus efeitos antioxidativos em gasolina automotiva

The chemical nature of the hidrocarbons found in gasoline directly affects the formation of oxidation complexes known as gums. Such complexes are slightly soluble in gasoline and their formation is delayed with the use of inhibitors, known as antioxidants. In this study, a synthetic compound (βnaphtol) and a natural subproduct (hydrogenated cardanol, derived from cashewnut shell liquid CNSL) have been used in order to generate novel antioxidant substances. These compounds were submitted to chemical reactions including alkylation, nitration and reduction, with the purpose of forming the following derivatives: 6(Nethyl,Nethylamino)βnaphtol (AO1); 6(Nethyl,Ndiethylamino)βnaphtol (AO2); aminoβnaphtol (AO3); 2(Nethyl,Nethylamino)pentadecylphenol (AOC1), 2(Nethyl,Ndiethylamino)pentadecylphenol (AOC2) and aminopentadecylphenol (AOC3). The derivatives were subjected to accelerated oxidative stability assays (Potential Gum and Induction Period) and to storage assays (Washed Gum and ASTM Color) during six months, with naphtha provided by the petroleum refinery RPBC (Refinaria Presidente Bernardes de Cubatão, in Brazil). The results for the derivatives were compared to those for commercial additives [DBPC (2,6ditbutyl4methylpcresol) and PDA (N,N disecbutylpphenylenediamine)], which were also added to the naphtha produced at RPBC at the moment of sampling. From all tested antioxidants, the novel antioxidant AOC1 (derived from hydrogenated cardanol) yielded a better global performance. During the period of time in which the naphtha was stored, an examination of this material was carried out in parallel, using the mass spectrometry technique. This study allowed to monitor the formation of a triolefinic compound, as well as the observation of subsequent formation and rupture of the olefinic constituents. As an eventual result from these experimental investigations, a reaction route leading to gum formation has been suggested

O discurso dos tuiteiros: uma análise crítica da construção identitária coletiva e do empoderamento cidadão

Los cambios sociales y culturales que caracterizan el mundo contemporáneo sorprendieron estudiosos de todas las áreas. Los avances tecnológicos principalmente en el área de transmisión de informaciones revolucionaron las nociones de tiempo y espacio. Nuevos medios de comunicación, favorecidos principalmente por la llegada de Internet, abrieron espacios de expresión para ciudadanos deseosos de ser oídos. Aún coexistiendo con los medios de comunicación tradicionales, los nuevos espacios representan una oportunidad de libertad de expresión, de interacción sin mediaciones y de construcción de contenidos independientes. Movimientos sociales se organizan a través de estos nuevos medios de comunicación y desarrollan un activismo que comienza en forma virtual y se extiende a movilizaciones presenciales. Castells (2009) llama de auto comunicación de masas a ese proceso de producir y difundir informaciones que antes era propiedad exclusiva de los medios de comunicación tradicionales. Natal, fue escenario de la gestación y articulación virtual de un movimiento denominado Fora Micarla cuyo objetivo ha sido lograr el impeachment de la alcaldesa de la ciudad, Micarla de Souza. Aunque el objetivo principal no fue alcanzado, el movimiento formó parte de los procesos de cambio social que llevaron los ciudadanos al ciberactivismo. El Fora Micarla se constituye también como un cambio social en sí mismo al colaborar en la consolidación de la identidad colectiva de un grupo de jóvenes universitarios en busca de justicia social. El Twitter fue el principal canal de expresión del grupo y responsable por la rápida expansión de las movilizaciones. El Abordaje Sociológico y Comunicacional del Discurso (ASCD) ha aportado el marco teórico de referencia utilizado en esta investigación. La Comunicación para el Cambio Social (GUMUCIO, 2008) y la Sociología Aplicada al Cambio Social (SACO, 2006) así como los estudios del sujeto y de las identidades (BAJOIT, 2006) forman la base de la ASCD para un estudio más completo de las prácticas discursivas. Considerando que el objeto de estudio son las manifestaciones discursivas de los usuarios simpatizantes del Movimiento Fora Micarla , y que la ASCD es un brazo del Análisis Crítico del Discurso, se hace necesario un análisis lingüístico de los textos. La Gramática Sistémica Funcional, a través del Sistema de Evaluación desarrollado por Martin and White (2004), ofrece los recursos para evaluar las manifestaciones por medio de tuítes de los integrantes del movimiento. La representación de los actores sociales (VAN LEUWEEN, 1998) complementa el análisis discursivo crítico de la ASCD. El empoderamiento ciudadano se materializa por medio de los cambios conquistados a través de los nuevos medios

Efeito da adição de lodo de estação de tratamento de água (ETA) nas propriedades de material cerâmico estrutural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolução microestrutural da cerâmica KSr2Nb5O15 dopada com CuO:B2O3

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Volatile compounds from organic and conventional passion fruit (Passiflora edulis F. Flavicarpa) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades física de molécilas orgânicas e compostos do tipo perovskita CdSiO3 e CaPbO3

In the first part of this work our concern was to investigate the thermal effects in organic crystals using the theory of the polarons. To analyse such effect, we used the Fröhlich s Hamiltonian, that describes the dynamics of the polarons, using a treatment based on the quantum mechanics, to elucidate the electron-phonon interaction. Many are the forms to analyzing the polaronic phenomenon. However, the measure of the dielectric function can supply important information about the small polarons hopping process. Besides, the dielectric function measures the answer to an applied external electric field, and it is an important tool for the understanding of the many-body effects in the normal state of a polaronic system. We calculate the dielectric function and its dependence on temperature using the Hartree-Fock decoupling method. The dieletric function s dependence on the temperature is depicted by through a 3D graph. We also analyzed the so called Arrhenius resistivity, as a functionof the temperature, which is an important tool to characterize the conductivity of an organic molecule. In the second part we analyzed two perovskita type crystalline oxides, namely the cadmium silicate triclinic (CdSiO3) and the calcium plumbate orthorhombic (CaPbO3), respectively. These materials are normally denominated ABO3 and they have been especially investigated for displaying ferroelectric, piezoelectric, dielectrics, semiconductors and superconductors properties. We found our results through ab initio method within the functional density theory (DFT) in the GGA-PBE and LDA-CAPZ approximations. After the geometry optimization for the two structure using the in two approximations, we found the structure parameters and compared them with the experimental data. We still determined further the angles of connection for the two analyzed cases. Soon after the convergence of the energy, we determined their band structures, fundamental information to characterize the nature of the material, as well as their dielectrics functions, optical absorption, partial density of states and effective masses of electrons and holes

Estudos de sinterização da mistura de pós cerâmicos diatomita-titânia

This work is part of an effort of consolidation of a daily search for powder technology at the Department of Physics of the Universidade Federal do Rio Grande do Norte. This work objective the study and development of new ceramic materials from raw materials abundant at the region. For this, were studied ceramic mixtures of powders from diatomite-titania to aiming at a new ceramic material from powder technology. The experimental work involved a characterization of ceramic powders from a diatomite-titania mixture. The powders obtained were pressed and then parameters like variation of mass, linear shrinkage, activation energy and the mechanism of sintering are studied in function of the time and temperature of sintering, beyond microstructural analysis. The obtained results allow us estimate the optimizing of sintering conditions of this material

Estudo de propriedades elétricas em compostos de Bario

Este trabalho tem como objetivo estudar a influência da adição de diversos aditivos tais como óxido de silício (SiO2), óxido de bismuto (BiO2), óxido de cério (CeO2) e óxido de lantânio (La2O3) nas propriedades elétricas e dielétricas do titanato de bário (BaTiO3) policristalino. As amostras de titanato de bário foram compactadas e sinterizadas no Laboratório de Tecnologia dos Pós, do Departamento de Física da Universidade Federal do Rio Grande do Norte. Foram realizadas medidas de resistividade elétrica e constante dielétrica em função da temperatura, bem como ensaios de difração de raios-X e análise microestrutural através da microscopia eletrônica de varredura. A análise dos resultados permitiu avaliar a influência dos aditivos nas propriedades elétricas e dielétricas, e propor a utilização de cerâmicas eletrônicas a base de titanato de bário com propriedades superiores as do material existente atualmente

Sobre a relação entre rotação, atividade crosmosférica e abundância de lítio em estrelas subgigantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior