Input Aggregation in Models of Data Envelopment Analysis: A Statistical Test with an Application to Indian Manufacturing

A problem frequently encountered in Data Envelopment Analysis (DEA) is that the total number of inputs and outputs included tend to be too many relative to the sample size. One way to counter this problem is to combine several inputs (or outputs) into (meaningful) aggregate variables reducing thereby the dimension of the input (or output) vector. A direct effect of input aggregation is to reduce the number of constraints. This, in its turn, alters the optimal value of the objective function. In this paper, we show how a statistical test proposed by Banker (1993) may be applied to test the validity of a specific way of aggregating several inputs. An empirical application using data from Indian manufacturing for the year 2002-03 is included as an example of the proposed test.

Are Indian Firms too Small? A Nonparametric Analysis of Cost Efficiency and Industry Structure of Indian Manufacturing

In this paper we use the 2004-05 Annual Survey of Industries data to estimate the levels of cost efficiency of Indian manufacturing firms in the various states and also get state level measures of industrial organization (IO) efficiency. The empirical results show the presence of considerable cost inefficiency in a majority of the states. Further, we also find that, on average, Indian firms are too small. Consolidating them to attain the optimal scale would further enhance efficiency and lower average cost.

Does the Presence of Surplus Labor Hinder Production in Indian Manufacturing?

Input congestion occurs at a given input bundle when the assumption of free disposability of inputs does not hold and an increase in input leads to a decline in output. In this paper we employ the nonparametric method of Data Envelopment Analysis (DEA) to examine the question on input congestion with respect to labor, using state level data from the Annual Survey of Industries for the period 1986-87 through 1999-2000. When the standard assumption of strong disposability is relaxed for the labor inputs, the nonparametric analysis of state-level data from Indian manufacturing shows considerable measure of labor input congestion. While in selected states congestion comes from non-production workers as well, the principal source of labor congestion is production labor. There is no evidence that the problem of labor congestion has become less severe during the post-Reform years. It appears that market forces without any major institutional changes in enforcement of labor discipline cannot eliminate congestion.

Surplus Labor in Indian Manufacturing: Evidence from the Annual Survey of Industries

In this paper we analyze state level data for total manufacturing constructed from the Annual Survey of Industries for the period 1986-2000 using the nonparametric method of Data Envelopment Analysis (DEA). We assess the extent of surplus labor in the manufacturing sector in the individual states in India. The study also investigates whether the same states show the maximum incidence of surplus labor every year in the sample period and if there any evidence that the extent of surplus labor in manufacturing has been reduced or eliminated in the post-reform era. Our study shows the presence of considerable measure of surplus labor in all of the years in a majority of the states. Things have worsened rather than improved after the reform. Also, the regional distribution of surplus labor has remain fairly unchanged with the same states performing inefficiently both before and after the reform.

A descriptive and exploratory analysis of occupational injuries at a chemical manufacturing facility

A retrospective study of 1353 occupational injuries occurring at a chemical manufacturing facility in Houston, Texas from January, 1982 through May, 1988 was performed to investigate the etiology of the occupational injury process. Injury incidence rates were calculated for various sub-populations of workers to determine differences in the risk of injury for various groups. Linear modeling techniques were used to determine the association between certain collected independent variables and severity of an injury event. Finally, two sub-groups of the worker population, shiftworkers and injury recidivists, were examined. An injury recidivist as defined is any worker experiencing one or more injury per year. Overall, female shiftworkers evidenced the highest average injury incidence rate compared to all other worker groups analyzed. Although the female shiftworkers were younger and less experienced, the etiology of their increased risk of injury remains unclear, although the rigors of performing shiftwork itself or ergonomic factors are suspect. In general, females were injured more frequently than males, but they did not incur more severe injuries. For all workers, many injuries were caused by erroneous or foregone training, and risk taking behaviors. Injuries of these types are avoidable. The distribution of injuries by severity level was bimodal; either injuries were of minor or major severity with only a small number of cases falling in between. Of the variables collected, only the type of injury incurred and the worker's titlecode were statistically significantly associated with injury severity. Shiftworkers did not sustain more severe injuries than other worker groups. Injury to shiftworkers varied as a 24-hour pattern; the greatest number occurred between 1200-1230 hours, (p = 0.002) by Cosinor analysis. Recidivists made up 3.3% of the population (23 males and 10 females), yet suffered 17.8% of the injuries. Although past research suggests that injury recidivism is a random statistical event, analysis of the data by logistic regression implicates gender, area worked, age and job titlecode as being statistically significantly related to injury recidivism at this facility. ^

Assessment of occupational exposures to organic chemicals in a plastics manufacturing facility

The objective of this dissertation was to design and implement strategies for assessment of exposures to organic chemicals used in the production of a styrene-butadiene polymer at the Texas Plastics Company (TPC). Linear statistical retrospective exposure models, univariate and multivariate, were developed based on the validation of historical industrial hygiene monitoring data collected by industrial hygienists at TPC, and additional current industrial hygiene monitoring data collected for the purposes of this study. The current monitoring data served several purposes. First, it provided information on current exposure data, in the form of unbiased estimates of mean exposure to organic chemicals for each job title included. Second, it provided information on homogeneity of exposure within each job title, through the use of a carefully designed sampling scheme which addressed variability of exposure both between and within job titles. Third, it permitted the investigation of how well current exposure data can serve as an evaluation tool for retrospective exposure estimation. Finally, this dissertation investigated the simultaneous evaluation of exposure to several chemicals, as well as the use of values below detection limits in a multivariate linear statistical model of exposures. ^

Flexibility and Academic Credits within Higher Education trends

La globalización en la Educación Superior y el nuevo marco de mercado dentro del sistema universitario ha introducido el concepto de flexibilidad. Uno de Ios instrumentos principales en el desarrollo de este proceso ha sido el Sistema de Crédito Académico (el Marco de Crédito), que es un modo de reestructurar el currículum hacia la Flexibilidad de Suministros. Muchos países en el mundo entero han introducido este modelo, después del Sistema de Crédito americano. Este trabajo explorará conceptualmente los eslabones entre las tendencias principales en la enseñanza superior y este nuevo concepto.

Diverging Development Paths of the Electronics Industry in Korea and Taiwan

This paper examines the process and mechanism of economic development in the Republic of Korea and Taiwan through a comparative analysis of the electronics industry in each country. The paper will show that in its initial stage of development, the electronics industry in both economies had the same type of dual structure: a domestic demand sector based on the protected domestic market, and an export sector intended to capitalize on low-wage labor for the international market. However, this dual structure in the two economies faded away after the mid-1970s as their respective indigenous export-oriented enterprises began to develop. But the primary industrial players in each economy were very different. In Korea they were comprehensive electronics manufacturers affiliated with chaebols, and in Taiwan they were small and medium-size enterprises. Differences in the two economies' development mechanisms have brought about this divergence in development paths. In Korea this mechanism has been characterized by the government's positive role and the chaebol's readiness to react to the government's leadership. In Taiwan the development mechanism has been based on the private sector independent from the government. As an extension of such diverged development paths, ICs and personal computers showed spectacular growth in Korea and Taiwan after the 1980s. The development of ICs in Korea was primarily the result of a decisive role played by the chaebol's sizable financial resources, while the competitiveness in personal computers largely reflected the agility and flexibility of Taiwanese small and medium-size enterprises.

International Competitiveness of Manufacturing Firms in sub-Saharan Africa

As the success of East Asian countries has shown, labor-intensive industry is recognized to lead economic growth in the early stages of development, utilizing relatively low labor costs. This same growth process has already started in South and South East Asian LDCs since the mid-1990s. However, the manufacturing sector in sub-Saharan Africa has been underdeveloped and manufacturing exports, in particular labour-intensive goods, have stagnated. This paper investigates the international competitiveness of the African manufacturing sector and its determinants through an analytical survey of empirical studies and a comparison with Asian low income countries. Empirical evidences indicate that primary factors of competitiveness, namely productivity, labour cost and exchange rate are unfavorable in sub-Saharan Africa. Representative arguments attribute the weak competitiveness to problems in the business environment, factor endowment, and the exchange rate. However, careful review shows that labour cost is beyond the range explained by endowment and misalignment of exchange rates have been reduced in Africa. Moreover, comparison with Asian low income countries which have competitiveness in labour-intensive goods shows no difference in the quality of business environment, while the labour cost is significantly lower than sub-Saharan African countries. Although results should be considered tentative, high labour cost beyond endowment and conservative investment behavior emerge as important factors for the weak competitiveness in sub-Saharan Africa when controlling income level.

The "Catching up" Process of Manufacturing in East Asia

This paper examines the "catching up" process of manufacturing in East Asia within the framework of North and South location. Results of this study indicate that latecomers of the ASEAN Four and China have advanced the "catching up" process. At the same time, second-runners of the Asian NIES have more extensively increased their "catching up" with Japan. Most "catching up" was realized in a very short period in the 1990s, and the advancement of the "catching up" process has moved into various industries from nondurable products to light machinery products. However, it has not yet advanced in heavy machinery such as in the industrial machinery and machine tool industries.

Procyclical Productivity and Returns-to-Scale in Philippine Manufacturing

The Philippines is regarded as a highly oligopolistic economy, and it is argued that this is a cause of the relative stagnation of the economy to neighbouring East Asian economies. This presumption might be associated with increasing returns to scale and market power, which are consistent with the procyclical total factor productivity that is observed in the Philippines and the United States. However, this study found no strong evidence supporting increasing returns for aggregate manufacturing and three-digit manufacturing industries during 1956-1980 in the Philippines, based on data constructed by Hooley (1985). Further, this study does not support external effect discussed in Caballero and Lyons (1992).

Causality Relationships between Total Exports with Agricultural and Manufacturing GDP in Tanzania

This paper, investigates causal relationships among agriculture, manufacturing and export in Tanzania by using time series data for the period between 1970 and 2005. The empirical results show in both sectors there is Granger causality where agriculture causes both exports and manufacturing. Exports also cause both agricultural GDP and manufacturing GDP and any two variables out of three jointly cause the third one. There is also some evidence that manufacturing does not cause export and agriculture. Regarding cointegration, pairwise agricultural GDP and export are cointegrated, export and manufacture are cointegrated. Agriculture and manufacture are cointegrated but they are lag sensitive. However, three variables, manufacturing, export and agriculture both together are cointegrated showing that they share long run relation and this has important economic implications.

A two-dimensional analysis of the impact of outward FDI on performance at home: evidence from Japanese manufacturing firms

This paper empirically investigates two areas of changes in firm behavior and performance at home before and after investing abroad. The first change is dependent upon the type of foreign direct investment (FDI): horizontal FDI or vertical FDI. The second change is dependent upon the firm’s domestic activities: production activities or non-production activities. From a theoretical standpoint, the impact of outward FDIs differs not only by type, but according to the firm’s activities. By exploiting two types of firm-level data that enable us to distinguish between production and non-production activities, our paper provides a detailed picture of the intra-firm changes in behavior and performance that occur as a result of production globalization.

The location of manufacturing firms and imperfect information in transport market

It is well know that transport charges are not symmetric: fronthaul and backhaul costs on a route may differ, because they are affected by the distribution of economic acitivities. This paper develops a two-regional general equilibrium model in which transport costs are determined endogenously as a result of a search and matching process. It is shown that economies or diseconomies of transport density emerge, depending on the search costs of transport firms and the relative importance of the possibility of backhaul transportation. It is found that the symmetry of the distribution of economic activity may break owing to economies of transport density when the additional search costs are small enough.

Development of Robotized Laser Welding Applications for Joining Thin Sheets

Laser Welding (LW) is more often used in manufacturing due to its advantages, such as accurate control, good repeatability, less heat input, opportunities for joining of special materials, high speed, capability to join small dimension parts etc. LW is dedicated to robotized manufacturing, and the fabrication cells are using various level of flexibility, from specialized robots to very flexible setups. This paper features several LW applications using two industrially-scaled manufacturing cells at UPM Laser Centre (CLUPM) of Polytechnical University of Madrid (Universidad Politécnica de Madrid). The one dedicated to Remote Laser Welding (RLW) of thin sheets for automotive and other sectors uses a CO2 laser of 3500 W. The second has a high flexibility, is based on a 6-axis ABB robot and a Nd:YAG laser of 3300 W, and is meant for various laser processing methods, including welding. After a short description of each cell, several LW applications experimented at CLUPM and recently implemented in industry are briefly presented: RLW of automotive coated sheets, LW of high strength automotive sheets, LW vs. laser hybrid welding (LHW) of Double Phase steel thin sheets, and LHW of thin sheets of stainless steel and carbon steel (dissimilar joints). The main technological issues overcame and the critical process parameters are pointed out. Conclusions about achievements and trends are provided.