Measuring the efficiency in Spanish municipal refuse collection services

The objective of this study is to analyse the technical or productive efficiency ofthe refuse collection services in 75 municipalities located in the Spanish regionof Catalonia. The analysis has been carried out using various techniques. Firstly we have calculated a deterministic parametric frontier, then a stochastic parametric frontier, and finally, various non-parametric approaches (DEA and FDH). Concerning the results, these naturally differ according to the technique used to approach the frontier. Nevertheless, they have an appearance of solidity, at least with regard to the ordinal concordance among the indices of efficiency obtained by the different approaches, as is demonstrated by the statistical tests used. Finally, we have attempted to search for any relation existing between efficiency and the method (public or private) of managing the services. No significant relation was found between the type of management and efficiencyindices

Evaluation of risk perception related to drug use during pregnancy: a Swiss survey

Introduction Health care professionals' perception of risk mayimpact on therapeutic management of women during pregnancy.Since the thalidomide tragedy, the use of drugs during pregnancygenerates fear. This concern might affect the estimation of the riskassociated with drug intake during pregnancy, leading to prematurediscontinuation of a required treatment, superfluous anxiety orpointless termination of a desired pregnancy. Although data regardingthe security of drugs during pregnancy are still scarce, a few specializedinformation sources exist providing reliable recommendationsfor daily practice. This study aimed at characterizing therisk perception associated with drugs during pregnancy in a sample ofSwiss health care professionals.Materials & Methods An online French and German survey was sentby email to the Swiss professional societies of Pharmacists, Gynecologists,Mid-wives and Pediatricians. The questionnaire wasconstructed to assess (a) the characteristics of the population and theopinion of the professionals regarding the medication use pattern intheir pregnant patients, (b) to evaluate the sources of information usedduring their practice and finally (c) to assess their risk perceptionassociated with drugs during pregnancy. Results were analyzed bydescriptive statistics.Results A total of 1,310 questionnaires were collected (18% responserate). Most health care professionals believe that 30-60% of theirpregnant patients are taking at least one treatment during their pregnancyand that 80% are adherent to it. A large majority think,however, that women are anxious when they must take their medication.More than 80% of health professionals commonly use theSwiss Drug Reference Book (Compendium) to assess the risk associatedwith drugs during pregnancy, despite the uniformly low levelof credibility and utility they express about this reference. Except forsome gynecologists, the majority of professionals are not aware of ordo not use specialized books. The majority of participants thinkwrongly that more than 30% of drugs are teratogenic. About 20% ofthem are not aware of the risk associated with paracetamol intakeduring pregnancy. More than 70% agree that phytotherapeutic mixturesare not safer than conventional drugs, with the exception of midwiveswho tend to overestimate the safety of such drugs. With thenotable exception of gynecologists, the risk related to drug intake wasoverall overestimated.Discussion & Conclusion Swiss professionals differ in their perceptionof the risk associated with drugs during pregnancy and tend tooverestimate it. The differences might be attributed to the level oftraining and awareness of specialized sources offering a realisticestimation of the risk. Further efforts are needed to expand thetraining and the tools for health care professionals to optimize druguse during pregnancy.

Nitrogen dynamics in soil management systems. I - flux of inorganic nitrogen (NH4+ and NO3-)

In agricultural systems the N-NH4+ and N-NO3- contents is significantly affected by soil management. This study investigated the dynamics of inorganic nitrogen (N; NH4+ and NO3-) in an experimental evaluation of soil management systems (SMSs) adopted in 1988 at the experimental station of the ABC Foundation in Ponta Grossa, in the Central South region of the State of Paraná. The objective of this study was to evaluate the changes in N-NH4+ and N-NO3- flux in the surface layer of a Red Latosol arising from SMSs over a 12-month period. The experiment was arranged in a completely randomized block design in split plots, in three replications. The plots consisted of the following SMSs: 1) conventional tillage (CT); 2) minimum tillage (MT); 3) no-tillage with chisel plow every three years (NT CH); and 4) continuous no-tillage (CNT). To evaluate the dynamics of inorganic N, the subplots represented samplings (11 sampling times, T1 - T11). The ammonium N (N-NH4+) and nitric N (N-NO3-) contents were higher in systems with reduced tillage (MT and NT CH) and without tillage (CNT) than in the CT system. In the period from October 2003 to February 2004, the N-NH4+ was higher than the N-NO3- soil content. Conversely, in the period from May 2004 to July 2004, the N-NO3- was higher than the N-NH4+ content. The greatest fluctuation in the N-NH4+ and N-NO3- contents occurred in the 0-2.5 cm layer, and the highest peak in the N-NH4+ and N-NO3- concentrations occurred after the surface application of N. Both N-NH4+ and N-NO3- were strongly correlated with the soil organic C content, which indicated that these properties vary together in the system.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Strategy of specification of management areas: rice grain yield as related to soil fertility

It is well-known nowadays that soil variability can influence crop yields. Therefore, to determine specific areas of soil management, we studied the Pearson and spatial correlations of rice grain yield with organic matter content and pH of an Oxisol (Typic Acrustox) under no- tillage, in the 2009/10 growing season, in Selvíria, State of Mato Grosso do Sul, in the Brazilian Cerrado (longitude 51º24' 21'' W, latitude 20º20' 56'' S). The upland rice cultivar IAC 202 was used as test plant. A geostatistical grid was installed for soil and plant data collection, with 120 sampling points in an area of 3.0 ha with a homogeneous slope of 0.055 m m-1. The properties rice grain yield and organic matter content, pH and potential acidity and aluminum content were analyzed in the 0-0.10 and 0.10-0.20 m soil layers. Spatially, two specific areas of agricultural land management were discriminated, differing in the value of organic matter and rice grain yield, respectively with fertilization at variable rates in the second zone, a substantial increase in agricultural productivity can be obtained. The organic matter content was confirmed as a good indicator of soil quality, when spatially correlated with rice grain yield.

MORPHOLOGICAL AND MICROMORPHOLOGICAL CHANGES IN THE STRUCTURE OF A RHODIC HAPLUDOX AS A RESULT OF AGRICULTURAL MANAGEMENT

In evaluation of soil quality for agricultural use, soil structure is one of the most important properties, which is influenced not only by climate, biological activity, and management practices but also by mechanical and physico-chemical forces acting in the soil. The purpose of this study was to evaluate the influence of conventional agricultural management on the structure and microstructure of a Latossolo Vermelho distroférrico típico (Rhodic Hapludox) in an experimental area planted to maize. Soil morphology was described using the crop profile method by identifying the distinct structural volumes called Morphologically Homogeneous Units (MHUs). For comparison, we also described a profile in an adjacent area without agricultural use and under natural regrowth referred to as Memory. We took undisturbed samples from the main MHUs so as to form thin sections and blocks of soil for micromorphological and micromorphometrical analyses. Results from the application of the crop profile method showed the occurrence of the following structural types: loose (L), fragmented (F) and continuous (C) in both profiles analyzed. In the Memory soil profile, the fragmented structures were classified as Fptμ∆+tf and Fmt∆μ, whose micromorphology shows an enaulic-porphyric (porous) relative distribution with a great deal of biological activity as indicated by the presence of vughs and channels. Lower down, from 0.20 to 0.35 m, there was a continuous soil volume (sub-type C∆μ), with a subangular block microstructure and an enaulic-porphyric relative distribution, though in this case more compact and with aggregate coalescence and less biological activity. The micromorphometrical study of the soil of the Memory Plot showed the predominance of complex pores in NAM (15.03 %), Fmt∆μ (11.72 %), and Fptμ∆+tf (7.73 %), and rounded pores in C∆μ (8.21 %). In the soil under conventional agricultural management, we observed fragmented structures similar to the Memory Plot from 0.02 to 0.20 m, followed by a volume with a compact continuous structure (C∆μ), without visible porosity and with few roots. In the MHUs under conventional management, reduction in the packing pores (40 %) was observed, mainly in the continuous units (C). The microstructure had well-defined blocks, with the occurrence of planar pores and less evidence of biological activity. In conclusion, the morphological and micromorphological analyses of the soil profiles studied offered complementary information regarding soil structural quality, especially concerning the changes in pore types as result of mechanical stress undergone by the soil.

Stress ulcer prophylaxis in non-critically ill patients: a prospective evaluation of current practice in a general surgery department

Objective: There is little evidence regarding the benefit of stress ulcer prophylaxis (SUP) outside critical care setting. Over-prescription of SUP is not devoid of risks. This prospective study aimed to evaluate the use of proton pump inhibitors (PPIs) for SUP in a general surgery department.Methods: Data collection was performed prospectively during an 8-week period on patients hospitalized in a general surgery department (58 beds) by pharmacists. Patients with a PPI prescription for the treatment of ulcers, gastro-oesophageal reflux disease, oesophagitis or epigastric pain were excluded. Patients admitted twice during the study period were not re-included. The American Society of Health-System Pharmacists guidelines on SUP were used to assess the appropriateness of de novo PPI prescriptions.Results: Among 255 consecutive patients in the study, 138 (54%) received a prophylaxis with PPI, of which 86 (62%) were de novo PPI prescriptions. One-hundred twenty-nine patients (94%) received esomeprazole (according to the hospital drug policy). The most frequent dosage was 40 mg/day. Use of PPI for SUP was evaluated in 67 patients. Fifty-three patients (79%) had no risk factors for SUP. Twelve and 2 patients had one or two risk factors, respectively. At discharge, PPI prophylaxis was continued in 34% of patients with a de novo PPI prescription.Conclusion: This study highlights the overuse of PPIs in non-ICU patients and the inappropriate continuation of PPI prescriptions at discharge.Treatment

Evaluation des pratiques d'irrigation, de fertilisation et d'application de pesticides dans l'agriculture périurbaine de Dakar, Sénégal

RESUMEL'agriculture urbaine et périurbalne - nommée ci-après AU - est un thème fort de recherche transversale, au vu des nombreux enjeux économiques, sociaux et environnementaux. L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle locale, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée sans porter atteinte à la santé et à l'environnement.Une approche basée sur l'étude des processus géochimiques dans ie sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.L'évaluation des impacts de l'irrigation avec des eaux usées brutes et des eaux de nappe saumâtres sur la qualité des sols (chapitre 2) a montré que l'alcalinité et les teneurs en calcium élevées des eaux saumâtres induisent la précipitation de CaC03 dans l'horizon superficiel du sol. Na remplace consécutivement Ca sur le complexe argilo-humique du sol et les bicarbonates diminuent dans la solution du sol. Le carbone organique dissout (COD) augmente significativement dans la solution du sol et dans la nappe sous-jacente. Malgré l'alcalinité et les teneurs très élevées en calcium des eaux usées, il y a peu de précipitation de CaC03 dans l'horizon superficiel du sol et une faible augmentation du sodium échangeable ESP. La nitrification de l'ammonium des eaux usées (moy 190mg/L à Pikine) produit des protons, qui ne sont plus tamponnés par les bicarbonates exportés hors du profil. Il y a alors une nette baisse de pH des sols irrigués par des eaux usées non traitées. Les sols irrigués par des eaux usées et saumâtres stockent moins de C et &#925; que les sols de référence.L'évaluation de l'influence de l'occupation des sols en zone périurbaine sur à la nappe phréatique peu profonde (chapitre 3) a permis de déterminer les traceurs représentatifs de l'occupation du sol, à savoir Br/CI, NO3/CI et &#948;180-&#925;03 pour l'irrigation par des eaux usées, pH et &#948;15&#925;-&#925;03 pour l'irrigation par des eaux de nappe, et Rb+Cr et &#922; pour les lixiviats de fosses septiques. Ce chapitre a mis en évidence des points importants de la dynamique de l'azote en zone périurbaine sous deux occupations du sol : (1) la dénitrification est un processus important dans l'agrosystème périurbain de Dakar en bas de dune, dans les gleysols où l'on trouve des conditions temporairement réduites et un substrat organique favorables aux microorganismes de la dénitrification. Les teneurs en nitrates sont presque nulles avec irrigation d'eau de nappe. (2) en bas de pente, mais avec irrigation quotidienne par les eaux usées, l'apport continu d'ammonium inhibe probablement la dénitrification, mais favorise la volatilisation. (3) la nitrification de l'ammonium dans la nappe lors de la lixiviation des fosses septiques se distingue de la nitrification de l'ammonium dans la zone non saturée dans la zone d'agriculture périurbaine par la composition isotopique de l'oxygène de l'eau. Une comparaison des flux d'azote entre l'agrosystème et les quartiers périurbains de Dakar (chapitre 4) ont révélé que ces derniers étaient du même ordre de grandeur par unité de surface, à savoir 2-4 tonnes &#925; /ha/an.L'évaluation des flux de pesticides dans l'agrosystème et des risques induits pour les eaux souterraines (chapitre 5) a révélé un fiux total de pesticides de 60kg/ha/an, totalisant 15 matières actives. Seules deux de ces matières actives sont autorisées par le comité des pesticides sahélien. Les pesticides les plus utilisés par les producteurs sont l'organochloré dicofol, les organophosphorés methamidophos, dimethoate et fenithrotion ainsi que le cabamate methomyl. Les flux les plus importants sont de 9 à 7 kg/ha/an (methomyl, methamidophos, ethoprophos et dicofol). Les pesticides qui présentent un risque élevé de contamination des eaux souterraines et qui devraient être prioritaires pour un suivi analytique sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, une meilleure gestion de la fertilisation est nécessaire dans la zone d'AU de Dakar, afin de (1) réduire les pertes gazeuses qui contribuent à l'effet de serre, (2) de ralentir la minéralisation du carbone et de l'azote organiques pour créer un stock de C et &#925; dans ces sols, (3) de limiter le lessivage dans la nappe et enfin, 4) d'augmenter l'efficacité d'utilisation de &#925; par les plantes. Une optimisation de l'irrigation devrait limiter l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et les mares permanentes.ABSTRACTUrban and periurban agriculture (UA) is an important issue in southern countries, because of its key role in their social and economical development and its environmental concern. The goal of this study was to contribute to a better understanding of pollutant transfer and nutrient cycling at the local scale, in order to implement the necessary improvements to guarantee the sustainability of this practice.An approach based on geochemical processes occurring in the vadose zone from the surface down to the groundwater level was chosen, at the scale of cultivated plots and at the regional scale of Dakar periurban areas, to determine the influence of land use.The assessment of irrigation with untreated domestic wastewater and brackish water on soil quality (chapter 2) showed: (1) that the high alkalinity and calcium contents of brackish water induce CaC03 precipitation in the top layer of the soil and therefore a replacement of Ca by Na on the clay- humic complexes, strongly marked during the dry season. Dissolved organic carbon (DOC) increased significantly in the soil solution and in the underlying groundwater. (2) in spite of the similarly high alkalinity and Ca contents of waste water, there is only little CaC03 precipitation and a low increase of the percentage of exchangeable sodium (ESP) in the soil top layer. The nitrification of the ammonium of wastewater (mean 190 mg/L in Pikine) produces protons, which are not any more buffered by bicarbonates exported out of the soil profile, which leads to a net decline of soil pH. Both soils irrigated with untreated wastewater and brackish water store less of C and &#925; than soils irrigated with non saline groundwater.The assessment of the impact of land use on the shallow groundwater (chapter 3) allowed determining representative tracers of the land use. Low Br/CI ratio, high NO3/CI ratio and low &#948;1&#946;&#927;- nitrate indicated the influence of wastewater; high pH and high 515N-nitrates indicated the influence of brackish water together with high amendments of organic fertilizers; high Rb+Cr and &#922; indicated the influence of poor sanitation facilities in periurban districts (septic tank leakage). This chapter also pointed out the following facts about the nitrogen dynamics : (1) denitrification is a key-process in the Dakar UA agrosystem in the gleysols irrigated with groundwater. The underlying groundwater is almost nitrate free. (2) in the Gleysols irrigated with waste water, ammonium inhibits denitrification but facilitate ammoniac volatilization. A comparison of nitrogen balance between the UA agrosystem and the periurban districts of Dakar (chapter 4) revealed similar flows per surface unit, namely 2-4 tons &#925; / ha / year.The evaluation of pesticides use in the UA agrosystem and the risk assessment for the groundwater (chapter 5) revealed a total flow of pesticides of 60kg / ha / year, totalizing 15 active substances. Only two of these are authorized by the Sahelian Pesticides Committee. The most used pesticides are dicofol (organochlorinated), methamidophos, dimethoate and fenithrotion (organophosphate) as well as methomyl. (carbamate). The most important flows vary between 9 to 7 kg / ha / year. Pesticides with a high risk of groundwater contamination - according to SIRIS and EPRIP 2 indicators - are: carbofuran, dimethoate, ethoprophos and methomyl. These substances should be established as a priority for an analytical follow-up in the different environmental compartments.In conclusion, a better management of the fertilization is necessary in the Dakar UA, (1) to reduce the gaseous losses which contribute to greenhouse emissions (2) to slow down the mineralization of the organic carbon and the nitrogen, in order to enhance the C and &#925; stock in these soils, (3) to limit the nitrate leaching in the groundwater and finally, 4) to increase the N-use efficiency of plants. An optimization of the irrigation scheme should limit the secondary sodisation if coupled with an increase the stable organic matter of the soil. An integrated or biologic crop pest strategy is urgently needed to minimize risks with respect to ground and surface water (ponds used for fishing).RESUME LARGE PUBLICL'agriculture mondiale connaît actuellement une crise majeure, affectée par les changements climatiques, la sécurité alimentaire et les dégradations de l'environnement. Elle n'a plus le rôle unique de produire, mais devient un élément essentiel de la protection des ressources naturelles et du paysage. Les politiques agricoles basées sur les marchés mondiaux devront se réorienter vers une agriculture locale basée sur le développement durable.La production alimentaire située dans l'enceinte des villes, nommée agriculture urbaine ou périurbaine (AU ci-après) joue un rôle important dans le contexte actuel d'accroissement de la population et de la pauvreté urbaines. L'AU concerne en effet la majorité des mégapoies du monde, fait vivre plus de 200 millions de personnes dans les pays du Sud, fournit jusqu'à 80% de la demande urbaine en certains produits frais, fait barrière à l'extension urbaine et permet un recyclage de certains déchets urbains. L'AU a pour particularité d'être à cheval entre des politiques rurales et urbaines, d'où un délaissement ce cette activité au secteur informel. Ce qui a développé de nombreuses stratégies à risques, comme à Dakar, où les petits producteurs périurbains irriguent quotidiennement avec des eaux usées domestiques par manque d'accès à une eau de bonne qualité et pour raccourcir les cycles de production. L'extrême précarité foncière des acteurs de l'AU de Dakar les empêchent d'investir à long terme et induit des pratiques inadéquates d'irrigation, d'usage de pesticides et de fertilisation de ces sols sableux.L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle des parcelles cultivées par des eaux usées et des eaux saumâtres, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée et surtout maintenue sans porter atteinte à la santé et à l'environnement. Pour cela, une approche basée sur l'étude des processus géochimiques dans le sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.Les résultats principaux de cette étude ont montré que (1) il y a un processus de salinisation anthropique des sols (sodisation) lors d'irrigation avec des eaux de nappe saumâtres, un processus accentué en saison sèche et lors d'années à pluviométrie déficitaire. Bien que les eaux usées soient aussi salines que les eaux de nappe, la salinisation des sols irrigués' par des eaux usées est limitée par l'ammonium présent dans les eaux usées (moy 190mg NH4/L à Pikine) qui produit de l'acidité lors de la transformation en nitrates dans le sol (nitrification). (2) les sols irrigués par des eaux usées (EU) stockent moins de C et &#925; que les sois de référence, ce qui montrent bien que l'azote des eaux usées n'est pas disponible pour les plantes, mais est lessivé dans la nappe (100 à 450 mg/L N03 sous irrigation par EU, alors que la limite de OMS est de 50mg/L). (3) l'utilisation des isotopes stables des nitrates et des éléments traces, notamment le bore et le brome, ont permis de distinguer l'influence de l'irrigation par des eaux usées, de l'irrigation par des eaux de nappe et des lixiviats de fosses septiques sur les propriétés de la nappe. (4) Le processus de la dénitrification (atténuation naturelle des concentrations en nitrates de la nappe par biotransformation en azote gazeux) est important dans les zones basses de l'agrosystème périurbain de Dakar, sous irrigation par eaux naturelles (&#925;&#927;3 < 50mg/L). Tandis que sous habitat sans assainissement adéquat, les nitrates atteignent 300 à 700 mg/L. (5) Le flux total de pesticides dans l'AU est énorme (60kg/ha/an) totalisant 15 pesticides, dont deux seulement sont autorisés. Les pesticides les plus utilisés sont des insecticides organophosphorés et organochlorés classés extrêmement dangereux à dangereux par l'OMS, appliqués à des doses de 2 à 9 kg/ha/an. Les pesticides qui ont montré un risque élevé de contamination des eaux souterraines avec les indicateurs SIRIS et EPRIP2 sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, nous recommandons la reconstitution d'un horizon superficiel des sols riche en matière organique stable et structuré par production locale de compost. Cette mesure réduira les pertes gazeuses contribuant à l'effet de serre, augmentera le stock de &#925; dans ces sols, alors utilisable par les plantes et permettra de diminuer l'irrigation car la capacité de rétention de l'eau dans le sol sera accru, ce qui limitera le lessivage des nitrates dans la nappe et l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et lesmares permanentes.

Hwyneeds: Methodology, Analysis and Evaluation, March 2001

The quadrennial need study was developed to assist in identifying county highway financial needs (construction, rehabilitation, maintenance, and administration) and in the distribution of the road use tax fund (RUTF) among the counties in the state. During the period since the need study was first conducted using HWYNEEDS software, between 1982 and 1998, there have been large fluctuations in the level of funds distributed to individual counties. A recent study performed by Jim Cable (HR-363, 1993), found that one of the major factors affecting the volatility in the level of fluctuations is the quality of the pavement condition data collected and the accuracy of these data. In 1998, the Center for Transportation Research and Education researchers (Maze and Smadi) completed a project to study the feasibility of using automated pavement condition data collected for the Iowa Pavement Management Program (IPMP) for the paved county roads to be used in the HWYNEEDS software (TR-418). The automated condition data are objective and also more current since they are collected in a two year cycle compared to the 10-year cycle used by HWYNEEDS right now. The study proved the use of the automated condition data in HWYNEEDS would be feasible and beneficial in educing fluctuations when applied to a pilot study area. In another recommendation from TR-418, the researchers recommended a full analysis and investigation of HWYNEEDS methodology and parameters (for more information on the project, please review the TR-418 project report). The study reported in this document builds on the previous study on using the automated condition data in HWYNEEDS and covers the analysis and investigation of the HWYNEEDS computer program methodology and parameters. The underlying hypothesis for this study is thatalong with the IPMP automated condition data, some changes need to be made to HWYNEEDS parameters to accommodate the use of the new data, which will stabilize the process of allocating resources and reduce fluctuations from one quadrennial need study to another. Another objective of this research is to investigate the gravel roads needs and study the feasibility of developing a more objective approach to determining needs on the counties gravel road network. This study identifies new procedures by which the HWYNEEDS computer program is used to conduct the quadrennial needs study on paved roads. Also, a new procedure will be developed to determine gravel roads needs outside of the HWYNEED program. Recommendations are identified for the new procedures and also in terms of making changes to the current quadrennial need study. Future research areas are also identified.

Field Evaluation of Timber Preservation Treatments for Highway Applications Final Report, December 2007

Timber material repair and replacement cost for timber bridges is a considerable expense to highway agencies in Iowa, especially to county road departments. To address these needs, the objectives of this investigation was to study the field effectiveness of various treatment alternatives used on Iowa roadway projects and to determine if the current specifications and testing are adequate for providing proper wood preservation. To satisfy the research needs, the project scope involved a literature review, identification of metrics, questionnaire survey of Iowa counties, onsite inspections, and a review of current specifications and testing procedures. Based on the preservative information obtained, the following general conclusions were made: Copper naphthenate is recommended as the plant-applied preservative treatment for timber bridges. Best Management Practices should be followed to ensure quality treatment of timber materials. Bridge maintenance programs need to be developed and implemented. The Iowa Department of Transportation specifications for preservative treatment are the regulating specification for bridges constructed with state or federal funding in Iowa and are also recommended for all other bridges.

EULAR recommendations for the management of primary small and medium vessel vasculitis.

Objectives: To develop European League Against Rheumatism (EULAR) recommendations for the management of small and medium vessel vasculitis. Methods: An expert group (consisting of 10 rheumatologists, 3 nephrologists, 2 immunologists, 2 internists representing 8 European countries and the USA, a clinical epidemiologist and a representative from a drug regulatory agency) identified 10 topics for a systematic literature search using a modified Delphi technique. In accordance with standardised EULAR operating procedures, recommendations were derived for the management of small and medium vessel vasculitis. In the absence of evidence, recommendations were formulated on the basis of a consensus opinion. Results: In all, 15 recommendations were made for the management of small and medium vessel vasculitis. The strength of recommendations was restricted by low quality of evidence and by EULAR standardised operating procedures. Conclusions: On the basis of evidence and expert consensus, recommendations have been made for the evaluation, investigation, treatment and monitoring of patients with small and medium vessel vasculitis for use in everyday clinical practice.

Conservative management of pancreatic fistula after pancreaticoduodenectomy with pancreaticogastrostomy.

BACKGROUND: Pancreatic fistula (PF), which is a major complication of pancreaticoduodenectomy (PD), can be treated conservatively or by reoperation. The aim of this study was to evaluate conservative management of PF, which was attempted whenever possible as a first-intention treatment in a large series of PD. STUDY DESIGN: From 1990 to 2000, 242 patients underwent PD with pancreaticogastrostomy. PF was observed in 31 (13%) and was defined by an amylase-rich surgical drainage fluid (above fivefold serum amylase) after postoperative day 5, or by presence on CT scan of a fluid collection located close to the anastomosis or containing amylase-rich fluid, or by operative findings in case of reoperation. Conservative management included total parenteral nutrition, nasogastric suction, imaging-guided percutaneous drainage of collection when necessary, and somatostatin or its analogues. RESULTS: PF was symptomatic in 20 patients (65%). Amylase level on surgical drainage fluid was elevated in 23 patients (74%). Four patients (13%), including two with hemorrhage and two with intraabdominal collection not accessible by percutaneous approach, were not considered for conservative management and underwent early reoperation. Conservative management was successful in the 27 patients (100%) in whom it was attempted, including the 10 who required percutaneous drainage. The only death (3%) occurred after massive hemorrhage complicating misdiagnosed PF. Mean hospital stay was 36 +/- 12 days (range 18 to 71) after successful conservative management. CONCLUSIONS: Conservative management of PF complicating PD is feasible and successful in above 85% of patients.

Maintenance Asset Management Project -- Phase II, July 31, 2013

Expanded abstract: Iowa Department of Transportation (IA DOT) is finalizing research to streamline field inventory/inspection of culverts by Maintenance and Construction staff while maximizing the use of tablet technologies. The project began in 2011 to develop some new best practices for field staff to assist in the inventory, inspection and maintenance of assets along the roadway. The team has spent the past year working through the complexities of identifying the most appropriate tablet hardware for field data collection. A small scale deployment of tablets occurred in spring of 2013 to collect several safety related assets (culverts, signs, guardrail, and incidents). Data can be collected in disconnected or connected modes and there is an associated desktop environment where data can be viewed and queried after being synced into the master database. The development of a deployment plan and related workflow processes are underway; which will eventually feed information into IA DOTs larger asset management system and make the information available for decision making. The team is also working with the IA DOT Design Office on Computer Aided Drafting (CAD) data processing and the IA DOT Construction office with a new digital As-Built plan process to leverage the complete data life-cycle so information can be developed once and leveraged by the Maintenance staff farther along in the process.

Speed Management Toolbox for Rural Communities, TR-630, 2012

The primary objective of this toolbox is to summarize various known traffic-calming treatments and their effectiveness. This toolbox focuses on roadway-based treatments for speed management, particularly for rural communities with transition zones. Education, enforcement, and policy strategies should also be considered, but are not the focus of this toolbox. The research team identified treatments based on their own research, a review of the literature, and discussion with other professionals. This toolbox describes each treatment and summarizes placement, advantages, disadvantages, effectiveness, appropriateness, and cost for each treatment. The categories of treatments covered in this toolbox are as follows: horizontal physical displacement, vertical physical displacement, narrowing, surroundings, pavement markings, traffic control signs, and other strategies. Separate 3- to 4-page Tech Briefs for various aspects of this toolbox are attached to this record: Center Islands with Raised Curbing for Rural Traffic Calming, Colored Entrance Treatments for Rural Traffic Calming, Dynamic Speed Feedback Signs for Rural Traffic Calming, Transverse Speed Bars for Rural Traffic Calming. This toolbox and the tech briefs are related to the report Evaluation of Low Cost Traffic Calming for Rural Communities – Phase II, which is also included in this record or can be found at http://publications.iowa.gov/id/eprint/14769

Development of a GPS-Based Sign Inventory Tool for Iowa’s Statewide Management System, May 2011

This report is on state-of-the-art research efforts specific to infrastructure inventory/data collection with sign inventory as a case study. The development of an agency-wide sign inventory is based on feature inventory and location information. Specific to location, a quick and simple location acquisition tool is critical to tying assets to an accurate location-referencing system. This research effort provides a contrast between legacy referencing systems (route and milepost) and global positioning system- (GPS-) based techniques (latitude and longitude) integrated into a geographic information system (GIS) database. A summary comparison of field accuracies using a variety of consumer grade devices is also provided. This research, and the data collection tools developed, are critical in supporting the Iowa Department of Transportation (DOT) Statewide Sign Management System development effort. For the last two years, a Task Force has embarked on a comprehensive effort to develop a sign management system to improve sign quality, as well as to manage all aspects of signage, from request, ordering, fabricating, installing, maintaining, and ultimately removing, and to provide the ability to budget for these key assets on a statewide basis. This effort supported the development of a sign inventory tool and is the beginning of the development of a sign management system to support the Iowa DOT efforts in the consistent, cost effective, and objective decision making process when it comes to signs and their maintenance.